all messages for Emacs-related lists mirrored at yhetil.org
 help / color / mirror / code / Atom feed
* Revise etc/DEBUG documentation
@ 2016-09-03 10:31 Alain Schneble
  2016-09-03 11:31 ` Eli Zaretskii
  0 siblings, 1 reply; 23+ messages in thread
From: Alain Schneble @ 2016-09-03 10:31 UTC (permalink / raw)
  To: emacs-devel

[-- Attachment #1: Type: text/plain, Size: 449 bytes --]

Hello

While studying how signals are handled in Emacs (both when run under a
POSIX system as well as MS-Windows) and also how GDB deals with them, I
thought it would be worth to revise the section 'Getting control to the
debugger' in etc/DEBUG to include some more information about how
signals can be used to interrupt Emacs debuggee and return control back
to GDB.

Would you mind installing this patch?  Any comments are welcome.

Thanks
Alain


[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: Revise etc/DEBUG --]
[-- Type: text/x-patch, Size: 7503 bytes --]

From 0c83a574a0b425b7dfd3effd0e0d6383227a2500 Mon Sep 17 00:00:00 2001
From: Alain Schneble <a.s@realize.ch>
Date: Sat, 3 Sep 2016 12:08:11 +0200
Subject: [PATCH] Revise DEBUG doc on how to get control to the debugger

* etc/DEBUG: Revise section 'Getting control to the
debugger'. Restructure exisiting content into subsections and add
further documentation related to how signals can be used to get control
back to the debugger.
---
 etc/DEBUG | 114 ++++++++++++++++++++++++++++++++++++++++++++++++++------------
 1 file changed, 93 insertions(+), 21 deletions(-)

diff --git a/etc/DEBUG b/etc/DEBUG
index 656e29a..e4390c0 100644
--- a/etc/DEBUG
+++ b/etc/DEBUG
@@ -190,45 +190,83 @@ kick in, provided that you run under GDB.
 
 ** Getting control to the debugger
 
+*** Breakpoints
+
+Setting a breakpoint is the usual way to configure a point in the
+program's execution thread where control will be returned to the
+debugger.  It is therefore wise to add breakpoints just after Emacs
+has been loaded into the debugger, but before it is actually run.
+
 'Fsignal' is a very useful place to put a breakpoint in.  All Lisp
 errors go through there.  If you are only interested in errors that
 would fire the debugger, breaking at 'maybe_call_debugger' is useful.
 
+'Fredraw_display' is another convenient function.  It is one that is
+rarely called and which you can invoke at will interactively with "M-x
+redraw-display RET".
+
+*** Signal interception
+
 It is useful, when debugging, to have a guaranteed way to return to
-the debugger at any time.  When using X, this is easy: type C-z at the
-window where Emacs is running under GDB, and it will stop Emacs just
-as it would stop any ordinary program.  When Emacs is running in a
-terminal, things are not so easy.
+the debugger at any time.  This allows adding or removing breakpoints
+or inspecting Emacs's state at an arbitrary point in time.
+
+GDB intercepts all signals sent to the debuggee (aka inferior) and
+gives control over what will happen with those: whether or not control
+is returned to GDB, a message is printed or if it shall be passed to
+the inferior when continuing execution.
 
-The src/.gdbinit file in the Emacs distribution arranges for SIGINT
-(C-g in Emacs) to be passed to Emacs and not give control back to GDB.
-On modern POSIX systems, you can override that with this command:
+The src/.gdbinit file in the Emacs distribution arranges for SIGINT to
+be passed to Emacs and not give control back to GDB.  This is
+especially useful for an Emacs debuggee running in a terminal, as it
+is configured to send a SIGINT as response to C-g keystroke.  On
+modern POSIX systems, you can override that with this command:
 
    handle SIGINT stop nopass
 
 After this 'handle' command, SIGINT will return control to GDB.  If
-you want the C-g to cause a QUIT within Emacs as well, omit the 'nopass'.
+you want this signal to cause a QUIT within Emacs running in a
+terminal as well, omit the 'nopass'.
+
+To list the configuration of all signals, use this command:
+
+   info signal
 
 A technique that can work when 'handle SIGINT' does not is to store
 the code for some character into the variable stop_character.  Thus,
 
     set stop_character = 29
 
-makes Control-] (decimal code 29) the stop character.
-Typing Control-] will cause immediate stop.  You cannot
-use the set command until the inferior process has been started.
-Put a breakpoint early in 'main', or suspend the Emacs,
-to get an opportunity to do the set command.
+makes Control-] (decimal code 29) the stop character.  Typing
+Control-] will cause a SIGTSTP to be sent to the Emacs debuggee
+itself.  You cannot use the set command until the inferior process has
+been started as it refers to a global variable in the Emacs debuggee
+process.  Put a breakpoint early in 'main', or suspend Emacs, to get
+an opportunity to do the set command.
+
+You can also send a signal to the inferior Emacs at any time by using
+kill.  For instance, to send a SIGTSTP, invoke the following command
+from a shell:
+
+   kill -TSTP [Inferior-Emacs-PID]
+
+Depending on the 'handle' configuration, this might also give control
+back to GDB.  If so, the signal can be suppressed from being forwarded
+to the inferior and Emacs resumed by invoking the command 'signal 0';
+regardeless of the active 'pass' / 'nopass' configuration. To
+substitute it with another signal, use 'signal [SIGNAME]' instead.
 
-Another technique for get control to the debugger is to put a
-breakpoint in some rarely used function.  One such convenient function
-is Fredraw_display, which you can invoke at will interactively with
-"M-x redraw-display RET".
+*** Emacs running in a terminal
 
-When Emacs is running in a terminal, it is sometimes useful to use a separate
-terminal for the debug session.  This can be done by starting Emacs as usual,
-then attaching to it from gdb with the 'attach' command which is explained in
-the node "Attach" of the GDB manual.
+When Emacs is running in a terminal, typing C-g will either send a
+SIGINT or a SIGQUIT signal to the Emacs process. And it arranges for
+both SIGINT and SIGQUIT to cause a QUIT within Emacs.
+
+It is sometimes useful to use a separate terminal for the debug
+session.  This can be done by starting Emacs as usual, then attaching
+to it from gdb with the 'attach' command which is explained in the
+node "Attach" of the GDB manual.  Another approach is shown under
+'Debugging the TTY (non-windowed) version' below.
 
 On MS-Windows, you can start Emacs in its own separate terminal by
 setting the new-console option before running Emacs under GDB:
@@ -236,6 +274,40 @@ setting the new-console option before running Emacs under GDB:
   (gdb) set new-console 1
   (gdb) run
 
+*** Emacs running under a window system
+
+When Emacs is running under a window system, reception of a SIGINT and
+SIGQUIT will cause it to terminate.  It might therefore be useful to
+configure the 'handle' command for those signals to use 'nopass', to
+prevent Emacs from terminating on reception of such signals.
+
+When using a window system, there is no reason for Emacs to handle C-g
+as a SIGINT, as keyboard input is processed by the window system's
+message pump.  Hence, no signal is sent as a response to a C-g.
+
+When using X, type C-z at the window where Emacs is running under GDB,
+and it will stop Emacs just as it would stop any ordinary program.
+
+On MS-Windows, starting Emacs in its own separate terminal even when
+running as a GUI application will allow you to send a Ctrl-c or
+Ctrl-Break to the console.  GDB treats them as a SIGINT, but Emacs
+won't terminate as it ignores these events.
+
+*** Signals sent to GDB
+
+There is a sublety in GDB about how it handles SIGINT signals sent to
+itself: it simply forwards them to the inferior process.  Hence,
+hitting C-c in the terminal used by GDB is a very convenient way to
+interrupt Emacs and -- depending on 'handle SIGINT' setup -- return
+control to the debugger.  When debugging with GDB in Emacs, you can
+use comint-interrupt-subjob command bound to 'C-c C-c' by default to
+get the same result.
+
+On MS-Windows, GDB will turn a C-c into a DebugBreakProcess call if
+Emacs is running in a separate terminal or it will just ignore it
+otherwise, as the event will be received by Emacs anyway when running
+under the same terminal as GDB.
+
 ** Examining Lisp object values.
 
 When you have a live process to debug, and it has not encountered a
-- 
2.9.1


^ permalink raw reply related	[flat|nested] 23+ messages in thread

end of thread, other threads:[~2016-09-07 17:39 UTC | newest]

Thread overview: 23+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-09-03 10:31 Revise etc/DEBUG documentation Alain Schneble
2016-09-03 11:31 ` Eli Zaretskii
2016-09-03 13:14   ` Alain Schneble
2016-09-03 13:45     ` Noam Postavsky
2016-09-03 14:35       ` Eli Zaretskii
2016-09-03 21:56       ` Alain Schneble
2016-09-03 14:34     ` Eli Zaretskii
2016-09-03 15:05       ` Noam Postavsky
2016-09-03 15:27         ` Eli Zaretskii
2016-09-03 21:51       ` Alain Schneble
2016-09-04 14:42         ` Eli Zaretskii
2016-09-04 16:24           ` Alain Schneble
2016-09-05 16:36             ` Eli Zaretskii
2016-09-05 17:00               ` Eli Zaretskii
2016-09-05 19:19               ` Alain Schneble
2016-09-05 19:35                 ` Alain Schneble
2016-09-06  2:39                 ` Eli Zaretskii
2016-09-06 10:06                   ` Alain Schneble
2016-09-06 15:16                     ` Eli Zaretskii
2016-09-06 16:14                       ` Alain Schneble
2016-09-06 16:54                         ` Alain Schneble
2016-09-06 21:52       ` Davis Herring
2016-09-07 17:39         ` Eli Zaretskii

Code repositories for project(s) associated with this external index

	https://git.savannah.gnu.org/cgit/emacs.git
	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.