* ^L showing up in Emacs M-x shell-mode, with ksh but not bash
@ 2019-11-05 0:19 Nicholas Papadonis
2019-11-05 0:30 ` Nicholas Papadonis
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Nicholas Papadonis @ 2019-11-05 0:19 UTC (permalink / raw)
To: Korn Shell, help-gnu-emacs
When Emacs is invoked in an X-session and when I resize a M-x shell-mode
*shell* window by more then a single line of text, $PS2 is being output in
the shell mode window. When I type <return> then a number of "^L"s are
also output in the shell mode window.
I'm using /bin/ksh93 in Debian.
This behavior does not occur with bash.
Does anyone know why this is happening? Also, more ways to debug it?
Thank you
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: ^L showing up in Emacs M-x shell-mode, with ksh but not bash 2019-11-05 0:19 ^L showing up in Emacs M-x shell-mode, with ksh but not bash Nicholas Papadonis @ 2019-11-05 0:30 ` Nicholas Papadonis 2019-11-05 1:00 ` Nicholas Papadonis 2019-11-05 1:56 ` Kurtis Rader 2019-11-06 2:17 ` Nicholas Papadonis 2 siblings, 1 reply; 10+ messages in thread From: Nicholas Papadonis @ 2019-11-05 0:30 UTC (permalink / raw) To: Korn Shell, help-gnu-emacs I added a video showing the issue at: https://youtu.be/oPERMapfapo On Mon, Nov 4, 2019 at 7:19 PM Nicholas Papadonis < nick.papadonis.ml@gmail.com> wrote: > When Emacs is invoked in an X-session and when I resize a M-x shell-mode > *shell* window by more then a single line of text, $PS2 is being output in > the shell mode window. When I type <return> then a number of "^L"s are > also output in the shell mode window. > > I'm using /bin/ksh93 in Debian. > > This behavior does not occur with bash. > > Does anyone know why this is happening? Also, more ways to debug it? > > Thank you > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: ^L showing up in Emacs M-x shell-mode, with ksh but not bash 2019-11-05 0:30 ` Nicholas Papadonis @ 2019-11-05 1:00 ` Nicholas Papadonis 0 siblings, 0 replies; 10+ messages in thread From: Nicholas Papadonis @ 2019-11-05 1:00 UTC (permalink / raw) To: Korn Shell, help-gnu-emacs I confirmed this behavior is still present without any special init scripts. I created a new account to check it. On Mon, Nov 4, 2019 at 7:30 PM Nicholas Papadonis < nick.papadonis.ml@gmail.com> wrote: > I added a video showing the issue at: > > https://youtu.be/oPERMapfapo > > On Mon, Nov 4, 2019 at 7:19 PM Nicholas Papadonis < > nick.papadonis.ml@gmail.com> wrote: > >> When Emacs is invoked in an X-session and when I resize a M-x shell-mode >> *shell* window by more then a single line of text, $PS2 is being output in >> the shell mode window. When I type <return> then a number of "^L"s are >> also output in the shell mode window. >> >> I'm using /bin/ksh93 in Debian. >> >> This behavior does not occur with bash. >> >> Does anyone know why this is happening? Also, more ways to debug it? >> >> Thank you >> > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: ^L showing up in Emacs M-x shell-mode, with ksh but not bash 2019-11-05 0:19 ^L showing up in Emacs M-x shell-mode, with ksh but not bash Nicholas Papadonis 2019-11-05 0:30 ` Nicholas Papadonis @ 2019-11-05 1:56 ` Kurtis Rader 2019-11-05 16:58 ` Nicholas Papadonis 2019-11-06 2:17 ` Nicholas Papadonis 2 siblings, 1 reply; 10+ messages in thread From: Kurtis Rader @ 2019-11-05 1:56 UTC (permalink / raw) To: Nicholas Papadonis; +Cc: help-gnu-emacs, Korn Shell On Mon, Nov 4, 2019 at 4:19 PM Nicholas Papadonis < nick.papadonis.ml@gmail.com> wrote: > When Emacs is invoked in an X-session and when I resize a M-x shell-mode > *shell* window by more then a single line of text, $PS2 is being output in > the shell mode window. When I type <return> then a number of "^L"s are > also output in the shell mode window. > > I'm using /bin/ksh93 in Debian. > > This behavior does not occur with bash. > > Does anyone know why this is happening? Also, more ways to debug it? > No idea what's happening, but I wouldn't leap to the conclusion that $PS2 is being displayed. Given the presence of the [ctrl-L] chars it's just as likely that both chars are being sent to the shell. Possibly bracketed-paste mode is enabled by the emacs shell mode. If you start the shell, then in a different window strace it what appears in the trace when you resize the window? Also, you might want to try the current development version that you'll find at https://github.com/att/ast/ <https://github.com/att/ast/pull/1427>. It's easy to build if you're willing to install Meson. P.S., You might want to take a look at https://asciinema.org for capturing terminal sessions for playback. -- Kurtis Rader Caretaker of the exceptional canines Junior and Hank ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: ^L showing up in Emacs M-x shell-mode, with ksh but not bash 2019-11-05 1:56 ` Kurtis Rader @ 2019-11-05 16:58 ` Nicholas Papadonis 2019-11-05 17:03 ` Nicholas Papadonis 0 siblings, 1 reply; 10+ messages in thread From: Nicholas Papadonis @ 2019-11-05 16:58 UTC (permalink / raw) To: Kurtis Rader; +Cc: help-gnu-emacs, Korn Shell This is what the child ksh M-x shell process is doing when I resize the window. As you can see the write of "> " near the end. Hopefully some folks have more insight into this. select(1, [0], NULL, NULL, NULL) = ? ERESTARTNOHAND (To be restarted if no handler) --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- rt_sigaction(SIGWINCH, {sa_handler=0x55e35c5a23b0, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, {sa_handler=0x55e35c5a23b0, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, 8) = 0 ioctl(2, TIOCGWINSZ, {ws_row=9, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 rt_sigprocmask(SIG_UNBLOCK, [WINCH], NULL, 8) = 0 rt_sigreturn({mask=[]}) = -1 EINTR (Interrupted system call) ioctl(2, TIOCGWINSZ, {ws_row=9, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 poll([], 0, 50) = 0 (Timeout) ioctl(2, TIOCGWINSZ, {ws_row=9, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 lseek(3, 0, SEEK_END) = 2 lseek(3, 0, SEEK_CUR) = 2 lseek(3, 2, SEEK_SET) = 2 read(3, "", 65536) = 0 lseek(3, 2, SEEK_SET) = 2 read(3, "", 65536) = 0 select(1, [0], NULL, NULL, {tv_sec=0, tv_usec=0}) = 0 (Timeout) write(2, "> ", 3) = 3 select(1, [0], NULL, NULL, NULL On Mon, Nov 4, 2019 at 8:57 PM Kurtis Rader <krader@skepticism.us> wrote: > On Mon, Nov 4, 2019 at 4:19 PM Nicholas Papadonis < > nick.papadonis.ml@gmail.com> wrote: > >> When Emacs is invoked in an X-session and when I resize a M-x shell-mode >> *shell* window by more then a single line of text, $PS2 is being output in >> the shell mode window. When I type <return> then a number of "^L"s are >> also output in the shell mode window. >> >> I'm using /bin/ksh93 in Debian. >> >> This behavior does not occur with bash. >> >> Does anyone know why this is happening? Also, more ways to debug it? >> > > No idea what's happening, but I wouldn't leap to the conclusion that $PS2 > is being displayed. Given the presence of the [ctrl-L] chars it's just as > likely that both chars are being sent to the shell. Possibly > bracketed-paste mode is enabled by the emacs shell mode. If you start the > shell, then in a different window strace it what appears in the trace when > you resize the window? Also, you might want to try the current development > version that you'll find at https://github.com/att/ast/ > <https://github.com/att/ast/pull/1427>. It's easy to build if you're > willing to install Meson. > > P.S., You might want to take a look at https://asciinema.org for > capturing terminal sessions for playback. > > -- > Kurtis Rader > Caretaker of the exceptional canines Junior and Hank > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: ^L showing up in Emacs M-x shell-mode, with ksh but not bash 2019-11-05 16:58 ` Nicholas Papadonis @ 2019-11-05 17:03 ` Nicholas Papadonis 2019-11-05 17:13 ` Perry Smith 2019-11-05 19:18 ` Kurtis Rader 0 siblings, 2 replies; 10+ messages in thread From: Nicholas Papadonis @ 2019-11-05 17:03 UTC (permalink / raw) To: Kurtis Rader; +Cc: help-gnu-emacs, Korn Shell The "^L"s are coming from this trace. Is anyone running ksh93 in Emacs shell-mode? ) = ? ERESTARTNOHAND (To be restarted if no handler) --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- rt_sigaction(SIGWINCH, {sa_handler=0x55e35c5a23b0, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, {sa_handler=0x55e35c5a23b0, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, 8) = 0 ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 rt_sigprocmask(SIG_UNBLOCK, [WINCH], NULL, 8) = 0 rt_sigreturn({mask=[]}) = -1 EINTR (Interrupted system call) ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 poll([], 0, 50) = 0 (Timeout) ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 lseek(3, 0, SEEK_END) = 2 lseek(3, 0, SEEK_CUR) = 2 lseek(3, 2, SEEK_SET) = 2 read(3, "", 65536) = 0 lseek(3, 2, SEEK_SET) = 2 read(3, "", 65536) = 0 select(1, [0], NULL, NULL, {tv_sec=0, tv_usec=0}) = 0 (Timeout) write(2, "> ", 3) = 3 select(1, [0], NULL, NULL, NULL) = ? ERESTARTNOHAND (To be restarted if no handler) --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- rt_sigaction(SIGWINCH, {sa_handler=0x55e35c5a23b0, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, {sa_handler=0x55e35c5a23b0, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, 8) = 0 ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=103, ws_xpixel=0, ws_ypixel=0}) = 0 rt_sigprocmask(SIG_UNBLOCK, [WINCH], NULL, 8) = 0 rt_sigreturn({mask=[]}) = -1 EINTR (Interrupted system call) ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=103, ws_xpixel=0, ws_ypixel=0}) = 0 poll([], 0, 50) = 0 (Timeout) ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=103, ws_xpixel=0, ws_ypixel=0}) = 0 select(1, [0], NULL, NULL, {tv_sec=0, tv_usec=0}) = 0 (Timeout) write(2, "> ", 3) = 3 select(1, [0], NULL, NULL, NULL) = ? ERESTARTNOHAND (To be restarted if no handler) --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- rt_sigaction(SIGWINCH, {sa_handler=0x55e35c5a23b0, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, {sa_handler=0x55e35c5a23b0, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, 8) = 0 ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=104, ws_xpixel=0, ws_ypixel=0}) = 0 rt_sigprocmask(SIG_UNBLOCK, [WINCH], NULL, 8) = 0 rt_sigreturn({mask=[]}) = -1 EINTR (Interrupted system call) ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=104, ws_xpixel=0, ws_ypixel=0}) = 0 poll([], 0, 50) = 0 (Timeout) ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=104, ws_xpixel=0, ws_ypixel=0}) = 0 select(1, [0], NULL, NULL, {tv_sec=0, tv_usec=0}) = 0 (Timeout) write(2, "> ", 3) = 3 select(1, [0], NULL, NULL, NULL) = 1 (in [0]) recvfrom(0, 0x7ffb3d814320, 65536, MSG_PEEK, NULL, NULL) = -1 ENOTSOCK (Socket operation on non-socket) read(0, "\n", 1) = 1 lseek(3, 0, SEEK_END) = 2 lseek(3, 0, SEEK_END) = 2 lseek(3, 0, SEEK_CUR) = 2 stat("/usr/bin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or directory) stat("/usr/sbin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or directory) stat("/bin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or directory) stat("/sbin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or directory) stat("/usr/local/bin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or directory) stat("/usr/local/sbin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or directory) stat("/usr/bin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or directory) stat("/usr/sbin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or directory) stat("/bin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or directory) stat("/sbin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or directory) stat("/usr/local/bin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or directory) stat("/usr/local/sbin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or directory) write(2, "\f\f: not found [No such file or d"..., 42) = 42 lseek(3, 0, SEEK_END) = 2 lseek(3, 2, SEEK_SET) = 2 lseek(3, 2, SEEK_SET) = 2 read(3, "", 65536) = 0 write(2, "[debian:~]$ ", 12) = 12 select(1, [0], NULL, NULL, NULL On Tue, Nov 5, 2019 at 11:58 AM Nicholas Papadonis < nick.papadonis.ml@gmail.com> wrote: > This is what the child ksh M-x shell process is doing when I resize the > window. As you can see the write of "> " near the end. Hopefully some > folks have more insight into this. > > select(1, [0], NULL, NULL, NULL) = ? ERESTARTNOHAND (To be > restarted if no handler) > --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- > rt_sigaction(SIGWINCH, {sa_handler=0x55e35c5a23b0, sa_mask=[], > sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, > {sa_handler=0x55e35c5a23b0, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, > sa_restorer=0x7ffb3cb91060}, 8) = 0 > ioctl(2, TIOCGWINSZ, {ws_row=9, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 > rt_sigprocmask(SIG_UNBLOCK, [WINCH], NULL, 8) = 0 > rt_sigreturn({mask=[]}) = -1 EINTR (Interrupted system > call) > ioctl(2, TIOCGWINSZ, {ws_row=9, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 > poll([], 0, 50) = 0 (Timeout) > ioctl(2, TIOCGWINSZ, {ws_row=9, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 > lseek(3, 0, SEEK_END) = 2 > lseek(3, 0, SEEK_CUR) = 2 > lseek(3, 2, SEEK_SET) = 2 > read(3, "", 65536) = 0 > lseek(3, 2, SEEK_SET) = 2 > read(3, "", 65536) = 0 > select(1, [0], NULL, NULL, {tv_sec=0, tv_usec=0}) = 0 (Timeout) > write(2, "> ", 3) = 3 > select(1, [0], NULL, NULL, NULL > > > On Mon, Nov 4, 2019 at 8:57 PM Kurtis Rader <krader@skepticism.us> wrote: > >> On Mon, Nov 4, 2019 at 4:19 PM Nicholas Papadonis < >> nick.papadonis.ml@gmail.com> wrote: >> >>> When Emacs is invoked in an X-session and when I resize a M-x shell-mode >>> *shell* window by more then a single line of text, $PS2 is being output in >>> the shell mode window. When I type <return> then a number of "^L"s are >>> also output in the shell mode window. >>> >>> I'm using /bin/ksh93 in Debian. >>> >>> This behavior does not occur with bash. >>> >>> Does anyone know why this is happening? Also, more ways to debug it? >>> >> >> No idea what's happening, but I wouldn't leap to the conclusion that $PS2 >> is being displayed. Given the presence of the [ctrl-L] chars it's just as >> likely that both chars are being sent to the shell. Possibly >> bracketed-paste mode is enabled by the emacs shell mode. If you start the >> shell, then in a different window strace it what appears in the trace when >> you resize the window? Also, you might want to try the current development >> version that you'll find at https://github.com/att/ast/ >> <https://github.com/att/ast/pull/1427>. It's easy to build if you're >> willing to install Meson. >> >> P.S., You might want to take a look at https://asciinema.org for >> capturing terminal sessions for playback. >> >> -- >> Kurtis Rader >> Caretaker of the exceptional canines Junior and Hank >> > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: ^L showing up in Emacs M-x shell-mode, with ksh but not bash 2019-11-05 17:03 ` Nicholas Papadonis @ 2019-11-05 17:13 ` Perry Smith 2019-11-05 17:18 ` Nicholas Papadonis 2019-11-05 19:18 ` Kurtis Rader 1 sibling, 1 reply; 10+ messages in thread From: Perry Smith @ 2019-11-05 17:13 UTC (permalink / raw) To: Nicholas Papadonis; +Cc: help-gnu-emacs, Kurtis Rader, Korn Shell [-- Attachment #1: Type: text/plain, Size: 8415 bytes --] I think you said that you created a new user and this still happens? My guess is that this is something to do with your .profile, .kshrc, etc. Don’t forget about the profile and rc files in /etc. I don’t recall which ones ksh93 loads. What OS is this on? > On Nov 5, 2019, at 11:03 AM, Nicholas Papadonis <nick.papadonis.ml@gmail.com> wrote: > > The "^L"s are coming from this trace. > > Is anyone running ksh93 in Emacs shell-mode? > > ) = ? ERESTARTNOHAND (To be restarted if no handler) > --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- > rt_sigaction(SIGWINCH, {sa_handler=0x55e35c5a23b0, sa_mask=[], > sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, > {sa_handler=0x55e35c5a23b0, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, > sa_restorer=0x7ffb3cb91060}, 8) = 0 > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 > rt_sigprocmask(SIG_UNBLOCK, [WINCH], NULL, 8) = 0 > rt_sigreturn({mask=[]}) = -1 EINTR (Interrupted system call) > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 > poll([], 0, 50) = 0 (Timeout) > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 > lseek(3, 0, SEEK_END) = 2 > lseek(3, 0, SEEK_CUR) = 2 > lseek(3, 2, SEEK_SET) = 2 > read(3, "", 65536) = 0 > lseek(3, 2, SEEK_SET) = 2 > read(3, "", 65536) = 0 > select(1, [0], NULL, NULL, {tv_sec=0, tv_usec=0}) = 0 (Timeout) > write(2, "> ", 3) = 3 > select(1, [0], NULL, NULL, NULL) = ? ERESTARTNOHAND (To be restarted > if no handler) > --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- > rt_sigaction(SIGWINCH, {sa_handler=0x55e35c5a23b0, sa_mask=[], > sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, > {sa_handler=0x55e35c5a23b0, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, > sa_restorer=0x7ffb3cb91060}, 8) = 0 > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=103, ws_xpixel=0, ws_ypixel=0}) = 0 > rt_sigprocmask(SIG_UNBLOCK, [WINCH], NULL, 8) = 0 > rt_sigreturn({mask=[]}) = -1 EINTR (Interrupted system call) > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=103, ws_xpixel=0, ws_ypixel=0}) = 0 > poll([], 0, 50) = 0 (Timeout) > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=103, ws_xpixel=0, ws_ypixel=0}) = 0 > select(1, [0], NULL, NULL, {tv_sec=0, tv_usec=0}) = 0 (Timeout) > write(2, "> ", 3) = 3 > select(1, [0], NULL, NULL, NULL) = ? ERESTARTNOHAND (To be restarted > if no handler) > --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- > rt_sigaction(SIGWINCH, {sa_handler=0x55e35c5a23b0, sa_mask=[], > sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, > {sa_handler=0x55e35c5a23b0, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, > sa_restorer=0x7ffb3cb91060}, 8) = 0 > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=104, ws_xpixel=0, ws_ypixel=0}) = 0 > rt_sigprocmask(SIG_UNBLOCK, [WINCH], NULL, 8) = 0 > rt_sigreturn({mask=[]}) = -1 EINTR (Interrupted system call) > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=104, ws_xpixel=0, ws_ypixel=0}) = 0 > poll([], 0, 50) = 0 (Timeout) > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=104, ws_xpixel=0, ws_ypixel=0}) = 0 > select(1, [0], NULL, NULL, {tv_sec=0, tv_usec=0}) = 0 (Timeout) > write(2, "> ", 3) = 3 > select(1, [0], NULL, NULL, NULL) = 1 (in [0]) > recvfrom(0, 0x7ffb3d814320, 65536, MSG_PEEK, NULL, NULL) = -1 ENOTSOCK > (Socket operation on non-socket) > read(0, "\n", 1) = 1 > lseek(3, 0, SEEK_END) = 2 > lseek(3, 0, SEEK_END) = 2 > lseek(3, 0, SEEK_CUR) = 2 > stat("/usr/bin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or > directory) > stat("/usr/sbin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or > directory) > stat("/bin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or > directory) > stat("/sbin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or > directory) > stat("/usr/local/bin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or > directory) > stat("/usr/local/sbin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or > directory) > stat("/usr/bin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or > directory) > stat("/usr/sbin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or > directory) > stat("/bin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or > directory) > stat("/sbin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or > directory) > stat("/usr/local/bin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or > directory) > stat("/usr/local/sbin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or > directory) > write(2, "\f\f: not found [No such file or d"..., 42) = 42 > lseek(3, 0, SEEK_END) = 2 > lseek(3, 2, SEEK_SET) = 2 > lseek(3, 2, SEEK_SET) = 2 > read(3, "", 65536) = 0 > write(2, "[debian:~]$ ", 12) = 12 > select(1, [0], NULL, NULL, NULL > > > On Tue, Nov 5, 2019 at 11:58 AM Nicholas Papadonis < > nick.papadonis.ml@gmail.com> wrote: > >> This is what the child ksh M-x shell process is doing when I resize the >> window. As you can see the write of "> " near the end. Hopefully some >> folks have more insight into this. >> >> select(1, [0], NULL, NULL, NULL) = ? ERESTARTNOHAND (To be >> restarted if no handler) >> --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- >> rt_sigaction(SIGWINCH, {sa_handler=0x55e35c5a23b0, sa_mask=[], >> sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, >> {sa_handler=0x55e35c5a23b0, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, >> sa_restorer=0x7ffb3cb91060}, 8) = 0 >> ioctl(2, TIOCGWINSZ, {ws_row=9, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 >> rt_sigprocmask(SIG_UNBLOCK, [WINCH], NULL, 8) = 0 >> rt_sigreturn({mask=[]}) = -1 EINTR (Interrupted system >> call) >> ioctl(2, TIOCGWINSZ, {ws_row=9, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 >> poll([], 0, 50) = 0 (Timeout) >> ioctl(2, TIOCGWINSZ, {ws_row=9, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 >> lseek(3, 0, SEEK_END) = 2 >> lseek(3, 0, SEEK_CUR) = 2 >> lseek(3, 2, SEEK_SET) = 2 >> read(3, "", 65536) = 0 >> lseek(3, 2, SEEK_SET) = 2 >> read(3, "", 65536) = 0 >> select(1, [0], NULL, NULL, {tv_sec=0, tv_usec=0}) = 0 (Timeout) >> write(2, "> ", 3) = 3 >> select(1, [0], NULL, NULL, NULL >> >> >> On Mon, Nov 4, 2019 at 8:57 PM Kurtis Rader <krader@skepticism.us> wrote: >> >>> On Mon, Nov 4, 2019 at 4:19 PM Nicholas Papadonis < >>> nick.papadonis.ml@gmail.com> wrote: >>> >>>> When Emacs is invoked in an X-session and when I resize a M-x shell-mode >>>> *shell* window by more then a single line of text, $PS2 is being output in >>>> the shell mode window. When I type <return> then a number of "^L"s are >>>> also output in the shell mode window. >>>> >>>> I'm using /bin/ksh93 in Debian. >>>> >>>> This behavior does not occur with bash. >>>> >>>> Does anyone know why this is happening? Also, more ways to debug it? >>>> >>> >>> No idea what's happening, but I wouldn't leap to the conclusion that $PS2 >>> is being displayed. Given the presence of the [ctrl-L] chars it's just as >>> likely that both chars are being sent to the shell. Possibly >>> bracketed-paste mode is enabled by the emacs shell mode. If you start the >>> shell, then in a different window strace it what appears in the trace when >>> you resize the window? Also, you might want to try the current development >>> version that you'll find at https://github.com/att/ast/ >>> <https://github.com/att/ast/pull/1427>. It's easy to build if you're >>> willing to install Meson. >>> >>> P.S., You might want to take a look at https://asciinema.org for >>> capturing terminal sessions for playback. >>> >>> -- >>> Kurtis Rader >>> Caretaker of the exceptional canines Junior and Hank >>> >> [-- Attachment #2: smime.p7s --] [-- Type: application/pkcs7-signature, Size: 2966 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: ^L showing up in Emacs M-x shell-mode, with ksh but not bash 2019-11-05 17:13 ` Perry Smith @ 2019-11-05 17:18 ` Nicholas Papadonis 0 siblings, 0 replies; 10+ messages in thread From: Nicholas Papadonis @ 2019-11-05 17:18 UTC (permalink / raw) To: Perry Smith; +Cc: help-gnu-emacs, Kurtis Rader, Korn Shell It's on Debian 9. On Tue, Nov 5, 2019 at 12:13 PM Perry Smith <pedz@easesoftware.com> wrote: > I think you said that you created a new user and this still happens? > > My guess is that this is something to do with your .profile, .kshrc, etc. > Don’t > forget about the profile and rc files in /etc. I don’t recall which ones > ksh93 loads. > > What OS is this on? > > > On Nov 5, 2019, at 11:03 AM, Nicholas Papadonis < > nick.papadonis.ml@gmail.com> wrote: > > > > The "^L"s are coming from this trace. > > > > Is anyone running ksh93 in Emacs shell-mode? > > > > ) = ? ERESTARTNOHAND (To be restarted if no handler) > > --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- > > rt_sigaction(SIGWINCH, {sa_handler=0x55e35c5a23b0, sa_mask=[], > > sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, > > {sa_handler=0x55e35c5a23b0, sa_mask=[], > sa_flags=SA_RESTORER|SA_INTERRUPT, > > sa_restorer=0x7ffb3cb91060}, 8) = 0 > > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=102, ws_xpixel=0, ws_ypixel=0}) > = 0 > > rt_sigprocmask(SIG_UNBLOCK, [WINCH], NULL, 8) = 0 > > rt_sigreturn({mask=[]}) = -1 EINTR (Interrupted system > call) > > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=102, ws_xpixel=0, ws_ypixel=0}) > = 0 > > poll([], 0, 50) = 0 (Timeout) > > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=102, ws_xpixel=0, ws_ypixel=0}) > = 0 > > lseek(3, 0, SEEK_END) = 2 > > lseek(3, 0, SEEK_CUR) = 2 > > lseek(3, 2, SEEK_SET) = 2 > > read(3, "", 65536) = 0 > > lseek(3, 2, SEEK_SET) = 2 > > read(3, "", 65536) = 0 > > select(1, [0], NULL, NULL, {tv_sec=0, tv_usec=0}) = 0 (Timeout) > > write(2, "> ", 3) = 3 > > select(1, [0], NULL, NULL, NULL) = ? ERESTARTNOHAND (To be > restarted > > if no handler) > > --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- > > rt_sigaction(SIGWINCH, {sa_handler=0x55e35c5a23b0, sa_mask=[], > > sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, > > {sa_handler=0x55e35c5a23b0, sa_mask=[], > sa_flags=SA_RESTORER|SA_INTERRUPT, > > sa_restorer=0x7ffb3cb91060}, 8) = 0 > > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=103, ws_xpixel=0, ws_ypixel=0}) > = 0 > > rt_sigprocmask(SIG_UNBLOCK, [WINCH], NULL, 8) = 0 > > rt_sigreturn({mask=[]}) = -1 EINTR (Interrupted system > call) > > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=103, ws_xpixel=0, ws_ypixel=0}) > = 0 > > poll([], 0, 50) = 0 (Timeout) > > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=103, ws_xpixel=0, ws_ypixel=0}) > = 0 > > select(1, [0], NULL, NULL, {tv_sec=0, tv_usec=0}) = 0 (Timeout) > > write(2, "> ", 3) = 3 > > select(1, [0], NULL, NULL, NULL) = ? ERESTARTNOHAND (To be > restarted > > if no handler) > > --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- > > rt_sigaction(SIGWINCH, {sa_handler=0x55e35c5a23b0, sa_mask=[], > > sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, > > {sa_handler=0x55e35c5a23b0, sa_mask=[], > sa_flags=SA_RESTORER|SA_INTERRUPT, > > sa_restorer=0x7ffb3cb91060}, 8) = 0 > > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=104, ws_xpixel=0, ws_ypixel=0}) > = 0 > > rt_sigprocmask(SIG_UNBLOCK, [WINCH], NULL, 8) = 0 > > rt_sigreturn({mask=[]}) = -1 EINTR (Interrupted system > call) > > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=104, ws_xpixel=0, ws_ypixel=0}) > = 0 > > poll([], 0, 50) = 0 (Timeout) > > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=104, ws_xpixel=0, ws_ypixel=0}) > = 0 > > select(1, [0], NULL, NULL, {tv_sec=0, tv_usec=0}) = 0 (Timeout) > > write(2, "> ", 3) = 3 > > select(1, [0], NULL, NULL, NULL) = 1 (in [0]) > > recvfrom(0, 0x7ffb3d814320, 65536, MSG_PEEK, NULL, NULL) = -1 ENOTSOCK > > (Socket operation on non-socket) > > read(0, "\n", 1) = 1 > > lseek(3, 0, SEEK_END) = 2 > > lseek(3, 0, SEEK_END) = 2 > > lseek(3, 0, SEEK_CUR) = 2 > > stat("/usr/bin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or > > directory) > > stat("/usr/sbin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or > > directory) > > stat("/bin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or > > directory) > > stat("/sbin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or > > directory) > > stat("/usr/local/bin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file > or > > directory) > > stat("/usr/local/sbin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file > or > > directory) > > stat("/usr/bin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or > > directory) > > stat("/usr/sbin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or > > directory) > > stat("/bin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or > > directory) > > stat("/sbin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or > > directory) > > stat("/usr/local/bin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file > or > > directory) > > stat("/usr/local/sbin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file > or > > directory) > > write(2, "\f\f: not found [No such file or d"..., 42) = 42 > > lseek(3, 0, SEEK_END) = 2 > > lseek(3, 2, SEEK_SET) = 2 > > lseek(3, 2, SEEK_SET) = 2 > > read(3, "", 65536) = 0 > > write(2, "[debian:~]$ ", 12) = 12 > > select(1, [0], NULL, NULL, NULL > > > > > > On Tue, Nov 5, 2019 at 11:58 AM Nicholas Papadonis < > > nick.papadonis.ml@gmail.com> wrote: > > > >> This is what the child ksh M-x shell process is doing when I resize the > >> window. As you can see the write of "> " near the end. Hopefully some > >> folks have more insight into this. > >> > >> select(1, [0], NULL, NULL, NULL) = ? ERESTARTNOHAND (To be > >> restarted if no handler) > >> --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- > >> rt_sigaction(SIGWINCH, {sa_handler=0x55e35c5a23b0, sa_mask=[], > >> sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, > >> {sa_handler=0x55e35c5a23b0, sa_mask=[], > sa_flags=SA_RESTORER|SA_INTERRUPT, > >> sa_restorer=0x7ffb3cb91060}, 8) = 0 > >> ioctl(2, TIOCGWINSZ, {ws_row=9, ws_col=102, ws_xpixel=0, ws_ypixel=0}) > = 0 > >> rt_sigprocmask(SIG_UNBLOCK, [WINCH], NULL, 8) = 0 > >> rt_sigreturn({mask=[]}) = -1 EINTR (Interrupted system > >> call) > >> ioctl(2, TIOCGWINSZ, {ws_row=9, ws_col=102, ws_xpixel=0, ws_ypixel=0}) > = 0 > >> poll([], 0, 50) = 0 (Timeout) > >> ioctl(2, TIOCGWINSZ, {ws_row=9, ws_col=102, ws_xpixel=0, ws_ypixel=0}) > = 0 > >> lseek(3, 0, SEEK_END) = 2 > >> lseek(3, 0, SEEK_CUR) = 2 > >> lseek(3, 2, SEEK_SET) = 2 > >> read(3, "", 65536) = 0 > >> lseek(3, 2, SEEK_SET) = 2 > >> read(3, "", 65536) = 0 > >> select(1, [0], NULL, NULL, {tv_sec=0, tv_usec=0}) = 0 (Timeout) > >> write(2, "> ", 3) = 3 > >> select(1, [0], NULL, NULL, NULL > >> > >> > >> On Mon, Nov 4, 2019 at 8:57 PM Kurtis Rader <krader@skepticism.us> > wrote: > >> > >>> On Mon, Nov 4, 2019 at 4:19 PM Nicholas Papadonis < > >>> nick.papadonis.ml@gmail.com> wrote: > >>> > >>>> When Emacs is invoked in an X-session and when I resize a M-x > shell-mode > >>>> *shell* window by more then a single line of text, $PS2 is being > output in > >>>> the shell mode window. When I type <return> then a number of "^L"s > are > >>>> also output in the shell mode window. > >>>> > >>>> I'm using /bin/ksh93 in Debian. > >>>> > >>>> This behavior does not occur with bash. > >>>> > >>>> Does anyone know why this is happening? Also, more ways to debug it? > >>>> > >>> > >>> No idea what's happening, but I wouldn't leap to the conclusion that > $PS2 > >>> is being displayed. Given the presence of the [ctrl-L] chars it's just > as > >>> likely that both chars are being sent to the shell. Possibly > >>> bracketed-paste mode is enabled by the emacs shell mode. If you start > the > >>> shell, then in a different window strace it what appears in the trace > when > >>> you resize the window? Also, you might want to try the current > development > >>> version that you'll find at https://github.com/att/ast/ > >>> <https://github.com/att/ast/pull/1427>. It's easy to build if you're > >>> willing to install Meson. > >>> > >>> P.S., You might want to take a look at https://asciinema.org for > >>> capturing terminal sessions for playback. > >>> > >>> -- > >>> Kurtis Rader > >>> Caretaker of the exceptional canines Junior and Hank > >>> > >> > > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: ^L showing up in Emacs M-x shell-mode, with ksh but not bash 2019-11-05 17:03 ` Nicholas Papadonis 2019-11-05 17:13 ` Perry Smith @ 2019-11-05 19:18 ` Kurtis Rader 1 sibling, 0 replies; 10+ messages in thread From: Kurtis Rader @ 2019-11-05 19:18 UTC (permalink / raw) To: Nicholas Papadonis; +Cc: help-gnu-emacs, Korn Shell I can't reproduce this. And I don't see anything in the strace output that would account for the \f chars. Which strongly suggests something like a use-after-free bug or using an uninitialized var. We've fixed a huge number of such bugs in the past two years thanks to updating the project so that we can employ tools like libc's debug malloc and ASAN. Honestly, I don't think there is much point in further debugging until you are able to reproduce this problem using the current source; or at least the 2020.0.0 stable release we recently announced. If you can't build from source you should be able to use a binary built for a comparable Linux distro such as Ubuntu or Fedora. Happy to give you a current binary from one of my Linux VMs I use for testing. On Tue, Nov 5, 2019 at 9:04 AM Nicholas Papadonis < nick.papadonis.ml@gmail.com> wrote: > The "^L"s are coming from this trace. > > Is anyone running ksh93 in Emacs shell-mode? > > ) = ? ERESTARTNOHAND (To be restarted if no handler) > --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- > rt_sigaction(SIGWINCH, {sa_handler=0x55e35c5a23b0, sa_mask=[], > sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, > {sa_handler=0x55e35c5a23b0, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, > sa_restorer=0x7ffb3cb91060}, 8) = 0 > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 > rt_sigprocmask(SIG_UNBLOCK, [WINCH], NULL, 8) = 0 > rt_sigreturn({mask=[]}) = -1 EINTR (Interrupted system > call) > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 > poll([], 0, 50) = 0 (Timeout) > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 > lseek(3, 0, SEEK_END) = 2 > lseek(3, 0, SEEK_CUR) = 2 > lseek(3, 2, SEEK_SET) = 2 > read(3, "", 65536) = 0 > lseek(3, 2, SEEK_SET) = 2 > read(3, "", 65536) = 0 > select(1, [0], NULL, NULL, {tv_sec=0, tv_usec=0}) = 0 (Timeout) > write(2, "> ", 3) = 3 > select(1, [0], NULL, NULL, NULL) = ? ERESTARTNOHAND (To be > restarted if no handler) > --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- > rt_sigaction(SIGWINCH, {sa_handler=0x55e35c5a23b0, sa_mask=[], > sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, > {sa_handler=0x55e35c5a23b0, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, > sa_restorer=0x7ffb3cb91060}, 8) = 0 > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=103, ws_xpixel=0, ws_ypixel=0}) = 0 > rt_sigprocmask(SIG_UNBLOCK, [WINCH], NULL, 8) = 0 > rt_sigreturn({mask=[]}) = -1 EINTR (Interrupted system > call) > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=103, ws_xpixel=0, ws_ypixel=0}) = 0 > poll([], 0, 50) = 0 (Timeout) > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=103, ws_xpixel=0, ws_ypixel=0}) = 0 > select(1, [0], NULL, NULL, {tv_sec=0, tv_usec=0}) = 0 (Timeout) > write(2, "> ", 3) = 3 > select(1, [0], NULL, NULL, NULL) = ? ERESTARTNOHAND (To be > restarted if no handler) > --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- > rt_sigaction(SIGWINCH, {sa_handler=0x55e35c5a23b0, sa_mask=[], > sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, > {sa_handler=0x55e35c5a23b0, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, > sa_restorer=0x7ffb3cb91060}, 8) = 0 > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=104, ws_xpixel=0, ws_ypixel=0}) = 0 > rt_sigprocmask(SIG_UNBLOCK, [WINCH], NULL, 8) = 0 > rt_sigreturn({mask=[]}) = -1 EINTR (Interrupted system > call) > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=104, ws_xpixel=0, ws_ypixel=0}) = 0 > poll([], 0, 50) = 0 (Timeout) > ioctl(2, TIOCGWINSZ, {ws_row=10, ws_col=104, ws_xpixel=0, ws_ypixel=0}) = 0 > select(1, [0], NULL, NULL, {tv_sec=0, tv_usec=0}) = 0 (Timeout) > write(2, "> ", 3) = 3 > select(1, [0], NULL, NULL, NULL) = 1 (in [0]) > recvfrom(0, 0x7ffb3d814320, 65536, MSG_PEEK, NULL, NULL) = -1 ENOTSOCK > (Socket operation on non-socket) > read(0, "\n", 1) = 1 > lseek(3, 0, SEEK_END) = 2 > lseek(3, 0, SEEK_END) = 2 > lseek(3, 0, SEEK_CUR) = 2 > stat("/usr/bin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or > directory) > stat("/usr/sbin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or > directory) > stat("/bin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or > directory) > stat("/sbin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or > directory) > stat("/usr/local/bin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file or > directory) > stat("/usr/local/sbin/\f\f\f", 0x7ffc17e88250) = -1 ENOENT (No such file > or directory) > stat("/usr/bin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or > directory) > stat("/usr/sbin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or > directory) > stat("/bin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or > directory) > stat("/sbin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or > directory) > stat("/usr/local/bin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file or > directory) > stat("/usr/local/sbin/\f\f\f", 0x7ffc17e88170) = -1 ENOENT (No such file > or directory) > write(2, "\f\f: not found [No such file or d"..., 42) = 42 > lseek(3, 0, SEEK_END) = 2 > lseek(3, 2, SEEK_SET) = 2 > lseek(3, 2, SEEK_SET) = 2 > read(3, "", 65536) = 0 > write(2, "[debian:~]$ ", 12) = 12 > select(1, [0], NULL, NULL, NULL > > > On Tue, Nov 5, 2019 at 11:58 AM Nicholas Papadonis < > nick.papadonis.ml@gmail.com> wrote: > >> This is what the child ksh M-x shell process is doing when I resize the >> window. As you can see the write of "> " near the end. Hopefully some >> folks have more insight into this. >> >> select(1, [0], NULL, NULL, NULL) = ? ERESTARTNOHAND (To be >> restarted if no handler) >> --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- >> rt_sigaction(SIGWINCH, {sa_handler=0x55e35c5a23b0, sa_mask=[], >> sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7ffb3cb91060}, >> {sa_handler=0x55e35c5a23b0, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, >> sa_restorer=0x7ffb3cb91060}, 8) = 0 >> ioctl(2, TIOCGWINSZ, {ws_row=9, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 >> rt_sigprocmask(SIG_UNBLOCK, [WINCH], NULL, 8) = 0 >> rt_sigreturn({mask=[]}) = -1 EINTR (Interrupted system >> call) >> ioctl(2, TIOCGWINSZ, {ws_row=9, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 >> poll([], 0, 50) = 0 (Timeout) >> ioctl(2, TIOCGWINSZ, {ws_row=9, ws_col=102, ws_xpixel=0, ws_ypixel=0}) = 0 >> lseek(3, 0, SEEK_END) = 2 >> lseek(3, 0, SEEK_CUR) = 2 >> lseek(3, 2, SEEK_SET) = 2 >> read(3, "", 65536) = 0 >> lseek(3, 2, SEEK_SET) = 2 >> read(3, "", 65536) = 0 >> select(1, [0], NULL, NULL, {tv_sec=0, tv_usec=0}) = 0 (Timeout) >> write(2, "> ", 3) = 3 >> select(1, [0], NULL, NULL, NULL >> >> >> On Mon, Nov 4, 2019 at 8:57 PM Kurtis Rader <krader@skepticism.us> wrote: >> >>> On Mon, Nov 4, 2019 at 4:19 PM Nicholas Papadonis < >>> nick.papadonis.ml@gmail.com> wrote: >>> >>>> When Emacs is invoked in an X-session and when I resize a M-x >>>> shell-mode *shell* window by more then a single line of text, $PS2 is being >>>> output in the shell mode window. When I type <return> then a number of >>>> "^L"s are also output in the shell mode window. >>>> >>>> I'm using /bin/ksh93 in Debian. >>>> >>>> This behavior does not occur with bash. >>>> >>>> Does anyone know why this is happening? Also, more ways to debug it? >>>> >>> >>> No idea what's happening, but I wouldn't leap to the conclusion that >>> $PS2 is being displayed. Given the presence of the [ctrl-L] chars it's just >>> as likely that both chars are being sent to the shell. Possibly >>> bracketed-paste mode is enabled by the emacs shell mode. If you start the >>> shell, then in a different window strace it what appears in the trace when >>> you resize the window? Also, you might want to try the current development >>> version that you'll find at https://github.com/att/ast/ >>> <https://github.com/att/ast/pull/1427>. It's easy to build if you're >>> willing to install Meson. >>> >>> P.S., You might want to take a look at https://asciinema.org for >>> capturing terminal sessions for playback. >>> >>> -- >>> Kurtis Rader >>> Caretaker of the exceptional canines Junior and Hank >>> >> -- > You received this message because you are subscribed to the Google Groups > "Korn Shell" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to korn-shell+unsubscribe@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/korn-shell/CAKD0t1%2BRdniqNExU0oXShbybZtAq7HSjoEFJdcL25Due4QEB6g%40mail.gmail.com > <https://groups.google.com/d/msgid/korn-shell/CAKD0t1%2BRdniqNExU0oXShbybZtAq7HSjoEFJdcL25Due4QEB6g%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- Kurtis Rader Caretaker of the exceptional canines Junior and Hank ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: ^L showing up in Emacs M-x shell-mode, with ksh but not bash 2019-11-05 0:19 ^L showing up in Emacs M-x shell-mode, with ksh but not bash Nicholas Papadonis 2019-11-05 0:30 ` Nicholas Papadonis 2019-11-05 1:56 ` Kurtis Rader @ 2019-11-06 2:17 ` Nicholas Papadonis 2 siblings, 0 replies; 10+ messages in thread From: Nicholas Papadonis @ 2019-11-06 2:17 UTC (permalink / raw) To: Korn Shell, help-gnu-emacs I also note using "set -o vi" only a single "> " is printed when resizing the window. I wonder why "PS2" which is for a long line that must be broken up is printed. In the meantime, I will install Debian 10 and try there. On Mon, Nov 4, 2019 at 7:19 PM Nicholas Papadonis < nick.papadonis.ml@gmail.com> wrote: > When Emacs is invoked in an X-session and when I resize a M-x shell-mode > *shell* window by more then a single line of text, $PS2 is being output in > the shell mode window. When I type <return> then a number of "^L"s are > also output in the shell mode window. > > I'm using /bin/ksh93 in Debian. > > This behavior does not occur with bash. > > Does anyone know why this is happening? Also, more ways to debug it? > > Thank you > ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2019-11-06 2:17 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-11-05 0:19 ^L showing up in Emacs M-x shell-mode, with ksh but not bash Nicholas Papadonis 2019-11-05 0:30 ` Nicholas Papadonis 2019-11-05 1:00 ` Nicholas Papadonis 2019-11-05 1:56 ` Kurtis Rader 2019-11-05 16:58 ` Nicholas Papadonis 2019-11-05 17:03 ` Nicholas Papadonis 2019-11-05 17:13 ` Perry Smith 2019-11-05 17:18 ` Nicholas Papadonis 2019-11-05 19:18 ` Kurtis Rader 2019-11-06 2:17 ` Nicholas Papadonis
Code repositories for project(s) associated with this external index https://git.savannah.gnu.org/cgit/emacs.git https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.