/DOS (xxx)
/Unix (xxx)
/Mac (#1)
I have not tried to see if you can put them all in. Let me know if it works to put them all in.
I have some Mac users in my class that might need that!
With this in my LaTeX file:> Hi everyone,
> Thanks for the tips in using export filters for code blocks. I thought I
> would share my current solution. The goal was to export all the code blocks
> in an org-file to files systematically named part1/script-%d.py where %d is
> a number. I didnot want to tangle exactly, because I wanted to avoid naming
> the code block tangle files.
>
> Then, I wanted to insert a pdf link that would open the file, after the
> syntax highlighted code.
>
> I wanted this because it is not convenient to copy and paste the
> syntax-highlighted code into an editor. I teach from the pdf that is
> generated, and it would be convenient to just open the code, edit and rerun
> to explore solutions.
>
> So, here is the solution:
>
> At the top of my orgfile, I have this definition which creates a pdf link.
>
> #+LATEX_HEADER: \newcommand{\LaunchBinary}[2]{%
> #+LATEX_HEADER: % #1: layer name,
> #+LATEX_HEADER: % #2: link text
> #+LATEX_HEADER: \leavevmode%
> #+LATEX_HEADER: \pdfstartlink attr{/C [0.9 0 0] /Border [0 0 2]} user {
> #+LATEX_HEADER: /Subtype /Link
> #+LATEX_HEADER: /A <<
> #+LATEX_HEADER: /F <<
> #+LATEX_HEADER: /DOS (#1)
> #+LATEX_HEADER: >>
> #+LATEX_HEADER: /S /Launch
> #+LATEX_HEADER: >>
> #+LATEX_HEADER: } #2%
> #+LATEX_HEADER: \pdfendlink%
> #+LATEX_HEADER: }
\LaunchBinary{lkfs-structure.org}{Open the file Org mode file.}
I get a red boxed link in the pdf output.
When I click on it, Adobe Reader complains:
Could not find an application to open the file ' '.
I can't understand the code for LaunchBinary, but noticed "DOS" and
wondered if the code is somehow dependent on the operating system.
I'm using a Mac.
All the best,
Tom
>
>
> Then, I use the code snippet below to export the file to latex. It is
> stored in a noexport section at the end of the document. basically I set a
> counter, and wrote a filter function for src blocks. the function captures
> the lines between the first and last (first is \begin{minted}... and last
> is \end{minted} in this case. I write those lines to a file named according
> to the counter, and finally insert \LaunchBinary... into the string
> returned by the filter. everything else in this let block is just
> fine-tuning the latex packages, and export behavior.
>
> (let (
> ;; these packages are loaded in the latex file
> (org-latex-default-packages-alist
> '(("utf8" "inputenc" nil)
> ("T1" "fontenc" nil)
> ("" "fixltx2e" nil)
> ("" "natbib" t)
> ("" "url" t)
> ("" "graphicx" t)
> ("" "textcomp" t)
> ("" "underscore" t)
> ("" "amsmath" t)
> ("version=3" "mhchem" t)
> ("tight,pdftex" "web" nil)
> ("" "exerquiz" nil)
> ("ImplMulti" "dljslib" nil)
> ))
> (async nil)
> (subtreep nil)
> (visible-only nil)
> (body-only nil))
>
> (setq counter 0)
>
> (defun ox-mrkup-filter-src-block (text back-end info)
> (setq counter (+ counter 1))
>
> (let ((filename (format "part1-scripts/script-%d.py" counter)))
> (with-temp-buffer
> (insert (mapconcat 'identity (butlast (cdr (split-string text "\n"
> t))) "\n"))
> (write-region (point-min) (point-max) filename))
>
> (format "%s
>
> \\LaunchBinary{%s}{Open the python script (%s).}
>
> " text filename filename)))
>
> (let ((org-export-filter-src-block-functions '(ox-mrkup-filter-src-block)))
> (org-latex-export-to-latex async subtreep visible-only body-only
> '(:with-author t
> :with-date t
> :with-title t
> :with-timestamps t
> :with-todo-keywords t
> :with-toc nil))))
>
>
> After building the pdf with pdflatex, I get a link with a red box around it
> that I can click on, and on my system it opens the python file in the
> python editor I have configured to open the file!
>
>
> Thanks again!
>
> John
>
> -----------------------------------
> John Kitchin
> Associate Professor
> Doherty Hall A207F
> Department of Chemical Engineering
> Carnegie Mellon University
> Pittsburgh, PA 15213
> 412-268-7803
> http://kitchingroup.cheme.cmu.edu
> Hi everyone,
> Thanks for the tips in using export filters for code blocks. I thought
> I would share my current solution. The goal was to export all the code
> blocks in an org-file to files systematically named part1/script-%d.py
> where %d is a number. I didnot want to tangle exactly, because I
> wanted to avoid naming the code block tangle files.
>
> Then, I wanted to insert a pdf link that would open the file, after
> the syntax highlighted code.
>
> I wanted this because it is not convenient to copy and paste the
> syntax-highlighted code into an editor. I teach from the pdf that is
> generated, and it would be convenient to just open the code, edit and
> rerun to explore solutions.
>
> So, here is the solution:
>
> At the top of my orgfile, I have this definition which creates a pdf
> link.
>
> #+LATEX_HEADER: \newcommand{\LaunchBinary}[2]{%
> #+LATEX_HEADER: % #1: layer name,
> #+LATEX_HEADER: % #2: link text
> #+LATEX_HEADER: \leavevmode%
> #+LATEX_HEADER: \pdfstartlink attr{/C [0.9 0 0] /Border [0 0 2]} user
> {
> #+LATEX_HEADER: /Subtype /Link
> #+LATEX_HEADER: /A <<
> #+LATEX_HEADER: /F <<
> #+LATEX_HEADER: /DOS (#1)
> #+LATEX_HEADER: >>
> #+LATEX_HEADER: /S /Launch
> #+LATEX_HEADER: >>
> #+LATEX_HEADER: } #2%
> #+LATEX_HEADER: \pdfendlink%
> #+LATEX_HEADER: }
>
> Then, I use the code snippet below to export the file to latex. It is
> stored in a noexport section at the end of the document. basically I
> set a counter, and wrote a filter function for src blocks. the
> function captures the lines between the first and last (first is
> \begin{minted}... and last is \end{minted} in this case. I write those
> lines to a file named according to the counter, and finally insert
> \LaunchBinary... into the string returned by the filter. everything
> else in this let block is just fine-tuning the latex packages, and
> export behavior.
>
> (let (
> ;; these packages are loaded in the latex file
> (org-latex-default-packages-alist
> '(("utf8" "inputenc" nil)
> ("T1" "fontenc" nil)
> ("" "fixltx2e" nil)
> ("" "natbib" t)
> ("" "url" t)
> ("" "graphicx" t)
> ("" "textcomp" t)
> ("" "underscore" t)
> ("" "amsmath" t)
> ("version=3" "mhchem" t)
> ("tight,pdftex" "web" nil)
> ("" "exerquiz" nil)
> ("ImplMulti" "dljslib" nil)
> ))
> (async nil)
> (subtreep nil)
> (visible-only nil)
> (body-only nil))
>
> (setq counter 0)
>
> (defun ox-mrkup-filter-src-block (text back-end info)
> (setq counter (+ counter 1))
>
> (let ((filename (format "part1-scripts/script-%d.py" counter)))
> (with-temp-buffer
> (insert (mapconcat 'identity (butlast (cdr (split-string text "\n"
> t))) "\n"))
> (write-region (point-min) (point-max) filename))
>
> (format "%s
>
> \\LaunchBinary{%s}{Open the python script (%s).}
>
> " text filename filename)))
>
> (let ((org-export-filter-src-block-functions '
> (ox-mrkup-filter-src-block)))
> (org-latex-export-to-latex async subtreep visible-only body-only
> '(:with-author t
> :with-date t
> :with-title t
> :with-timestamps t
> :with-todo-keywords t
> :with-toc nil))))
>
> After building the pdf with pdflatex, I get a link with a red box
> around it that I can click on, and on my system it opens the python
> file in the python editor I have configured to open the file!
>
> Thanks again!
>
> John
>
> -----------------------------------
> John Kitchin
> Associate Professor
> Doherty Hall A207F
> Department of Chemical Engineering
> Carnegie Mellon University
> Pittsburgh, PA 15213
> 412-268-7803
> http://kitchingroup.cheme.cmu.edu
>
>