* Load Custom Agenda at emacs launch
@ 2012-08-16 21:59 Ken Mankoff
2012-08-16 22:45 ` Nick Dokos
2012-08-16 22:50 ` Eric Abrahamsen
0 siblings, 2 replies; 6+ messages in thread
From: Ken Mankoff @ 2012-08-16 21:59 UTC (permalink / raw
To: emacs-orgmode
Hi,
I find the first thing I do after launching emacs is to load my custom
agenda, bound to C-c a c.
Is there a way I can launch this from the command-line? I know I can
run 'emacs -eval "(foo)"', but I haven't been able to determine the
function that loads my custom agenda. Does such a function exist, or
is there a way to specific the keystrokes from the command line?
Thanks,
-k.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Load Custom Agenda at emacs launch
2012-08-16 21:59 Load Custom Agenda at emacs launch Ken Mankoff
@ 2012-08-16 22:45 ` Nick Dokos
2012-08-16 22:50 ` Eric Abrahamsen
1 sibling, 0 replies; 6+ messages in thread
From: Nick Dokos @ 2012-08-16 22:45 UTC (permalink / raw
To: Ken Mankoff; +Cc: emacs-orgmode
Ken Mankoff <mankoff@gmail.com> wrote:
> Hi,
>
> I find the first thing I do after launching emacs is to load my custom
> agenda, bound to C-c a c.
>
> Is there a way I can launch this from the command-line? I know I can
> run 'emacs -eval "(foo)"', but I haven't been able to determine the
> function that loads my custom agenda. Does such a function exist, or
> is there a way to specific the keystrokes from the command line?
>
Untested:
emacs --eval '(org-agenda nil "c" nil)'
or add
(org-agenda nil "c" nil)
at the bottom of your .emacs file.
Nick
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Load Custom Agenda at emacs launch
2012-08-16 21:59 Load Custom Agenda at emacs launch Ken Mankoff
2012-08-16 22:45 ` Nick Dokos
@ 2012-08-16 22:50 ` Eric Abrahamsen
2012-08-17 0:53 ` Ken Mankoff
1 sibling, 1 reply; 6+ messages in thread
From: Eric Abrahamsen @ 2012-08-16 22:50 UTC (permalink / raw
To: emacs-orgmode
On Fri, Aug 17 2012, Ken Mankoff wrote:
> Hi,
>
> I find the first thing I do after launching emacs is to load my custom
> agenda, bound to C-c a c.
>
> Is there a way I can launch this from the command-line? I know I can
> run 'emacs -eval "(foo)"', but I haven't been able to determine the
> function that loads my custom agenda. Does such a function exist, or
> is there a way to specific the keystrokes from the command line?
Hi Ken,
If you look at the docstring for `org-agenda', you'll see you can call
it with the prefix arg as the first argument, and the selector key as
the second. Assuming you don't need a prefix argument, this should work
for you:
(org-agenda nil "c")
Put that at the bottom of your init file (or run it as an after-init
hook), and it will be the first thing you see when you start emacs.
--
GNU Emacs 24.1.50.1 (i686-pc-linux-gnu, GTK+ Version 2.24.11)
of 2012-08-14 on pellet
7.8.11
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Load Custom Agenda at emacs launch
2012-08-16 22:50 ` Eric Abrahamsen
@ 2012-08-17 0:53 ` Ken Mankoff
2012-08-17 3:25 ` Nick Dokos
0 siblings, 1 reply; 6+ messages in thread
From: Ken Mankoff @ 2012-08-17 0:53 UTC (permalink / raw
To: Eric Abrahamsen; +Cc: emacs-orgmode
Hi Eric,
On Thu, Aug 16, 2012 at 3:50 PM, Eric Abrahamsen
<eric@ericabrahamsen.net> wrote:
> On Fri, Aug 17 2012, Ken Mankoff wrote:
>
>> Hi,
>>
>> I find the first thing I do after launching emacs is to load my custom
>> agenda, bound to C-c a c.
>>
>> Is there a way I can launch this from the command-line? I know I can
>> run 'emacs -eval "(foo)"', but I haven't been able to determine the
>> function that loads my custom agenda. Does such a function exist, or
>> is there a way to specific the keystrokes from the command line?
>
> Hi Ken,
>
> If you look at the docstring for `org-agenda', you'll see you can call
> it with the prefix arg as the first argument, and the selector key as
> the second. Assuming you don't need a prefix argument, this should work
> for you:
>
> (org-agenda nil "c")
>
> Put that at the bottom of your init file (or run it as an after-init
> hook), and it will be the first thing you see when you start emacs.
>
That works fairly well. I'm doing the CLI --eval version because I
often launch emacs w/o wanting to enter org mode. But I get a screen
with 90% org and 10% *scratch* buffer... Again, some searching and
trying to call the "kill-buffer" function, and I haven't figured it
out. Any hints on how to get full-terminal agenda mode? Sorry if these
are newbie questions.
-k.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Load Custom Agenda at emacs launch
2012-08-17 0:53 ` Ken Mankoff
@ 2012-08-17 3:25 ` Nick Dokos
2012-08-17 5:47 ` Ken Mankoff
0 siblings, 1 reply; 6+ messages in thread
From: Nick Dokos @ 2012-08-17 3:25 UTC (permalink / raw
To: Ken Mankoff; +Cc: Eric Abrahamsen, emacs-orgmode
Ken Mankoff <mankoff@gmail.com> wrote:
> Hi Eric,
>
> On Thu, Aug 16, 2012 at 3:50 PM, Eric Abrahamsen
> <eric@ericabrahamsen.net> wrote:
> > On Fri, Aug 17 2012, Ken Mankoff wrote:
> >
> >> Hi,
> >>
> >> I find the first thing I do after launching emacs is to load my custom
> >> agenda, bound to C-c a c.
> >>
> >> Is there a way I can launch this from the command-line? I know I can
> >> run 'emacs -eval "(foo)"', but I haven't been able to determine the
> >> function that loads my custom agenda. Does such a function exist, or
> >> is there a way to specific the keystrokes from the command line?
> >
> > Hi Ken,
> >
> > If you look at the docstring for `org-agenda', you'll see you can call
> > it with the prefix arg as the first argument, and the selector key as
> > the second. Assuming you don't need a prefix argument, this should work
> > for you:
> >
> > (org-agenda nil "c")
> >
> > Put that at the bottom of your init file (or run it as an after-init
> > hook), and it will be the first thing you see when you start emacs.
> >
>
> That works fairly well. I'm doing the CLI --eval version because I
> often launch emacs w/o wanting to enter org mode. But I get a screen
> with 90% org and 10% *scratch* buffer... Again, some searching and
> trying to call the "kill-buffer" function, and I haven't figured it
> out. Any hints on how to get full-terminal agenda mode? Sorry if these
> are newbie questions.
>
Try
emacs -q -l /path/to/minimal/org.el\
--eval '(progn (setq org-agenda-window-setup (quote current-window)) (org-agenda nil "c" nil))'
Nick
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Load Custom Agenda at emacs launch
2012-08-17 3:25 ` Nick Dokos
@ 2012-08-17 5:47 ` Ken Mankoff
0 siblings, 0 replies; 6+ messages in thread
From: Ken Mankoff @ 2012-08-17 5:47 UTC (permalink / raw
To: nicholas.dokos; +Cc: Eric Abrahamsen, emacs-orgmode
On Thu, Aug 16, 2012 at 8:25 PM, Nick Dokos <nicholas.dokos@hp.com> wrote:
>
> Try
>
> emacs -q -l /path/to/minimal/org.el\
> --eval '(progn (setq org-agenda-window-setup (quote current-window)) (org-agenda nil "c" nil))'
>
> Nick
Works perfectly! Thank you.
-k.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-08-17 5:47 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-08-16 21:59 Load Custom Agenda at emacs launch Ken Mankoff
2012-08-16 22:45 ` Nick Dokos
2012-08-16 22:50 ` Eric Abrahamsen
2012-08-17 0:53 ` Ken Mankoff
2012-08-17 3:25 ` Nick Dokos
2012-08-17 5:47 ` Ken Mankoff
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.