From: Radon Rosborough <radon.neon@gmail.com>
To: Eli Zaretskii <eliz@gnu.org>
Cc: rms@gnu.org, emacs-devel <emacs-devel@gnu.org>
Subject: Re: Loading a package applies automatically to future sessions?
Date: Wed, 14 Feb 2018 20:40:16 -0800 [thread overview]
Message-ID: <CADB4rJEksAJ9dQO9ZKtzdfbC7F231Gyrkq24xT13h9FUHONYrw@mail.gmail.com> (raw)
In-Reply-To: <837erl2gxo.fsf@gnu.org>
[-- Attachment #1.1: Type: text/plain, Size: 328 bytes --]
> Thanks. It looks like all of those places are related to package.el,
> so could you please take care of clarifying the issue as part of your
> patch? Most of those places are touched by your patch anyway.
I have done this; the patch and my comments are in the main thread.
For convenience, the patch is also attached here.
[-- Attachment #1.2: Type: text/html, Size: 596 bytes --]
[-- Attachment #2: 0001-Add-early-init-file-stop-package-initialize-insertio.patch --]
[-- Type: application/octet-stream, Size: 38832 bytes --]
From aaf0192d3da753df1f5e0dab1907affc719e191c Mon Sep 17 00:00:00 2001
From: Radon Rosborough <radon.neon@gmail.com>
Date: Sun, 17 Dec 2017 17:31:17 -0700
Subject: [PATCH] Add early init file, stop package-initialize insertion
* lisp/startup.el (early-init-file): New variable.
(load-user-init-file): New function.
(command-line): Load the early init file using `load-user-init-file'.
Move the check for an invalid username to just before that, and move
the initialization of the package system to just after. Load the
regular init file using `load-user-init-file'.
* src/lread.c (Vuser_init_file): Note change in semantics due to its
usage while loading the early init file.
* lisp/emacs-lisp/package.el (package--ensure-init-file): Remove
definition, usage, and documentation.
(package--init-file-ensured): Remove definition and usage.
* doc/emacs/custom.texi: Document early init file.
* doc/lispref/os.texi: Document early init file. Update startup
summary.
* doc/lispref/package.texi: Document changes to when
package-initialize is called, and advise against calling it in the
init file. Change terminology for package 'loading'.
* doc/emacs/package.texi: Document changes to when package-initialize
is called. Change terminology for package 'loading'.
* doc/misc/org.texi: Don't recommend to call package-initialize in the
init file.
Discussion on emacs-devel leading up to this change (approximately 150
messages):
- https://lists.gnu.org/archive/html/emacs-devel/2017-08/msg00154.html
- https://lists.gnu.org/archive/html/emacs-devel/2017-08/msg00433.html
- https://lists.gnu.org/archive/html/emacs-devel/2017-09/msg00023.html
- https://lists.gnu.org/archive/html/emacs-devel/2017-09/msg00599.html
- https://lists.gnu.org/archive/html/emacs-devel/2017-10/msg00332.html
---
doc/emacs/custom.texi | 17 ++
doc/emacs/package.texi | 78 +++++-----
doc/lispref/os.texi | 38 +++--
doc/lispref/package.texi | 30 ++--
doc/misc/org.texi | 4 +-
etc/NEWS | 19 +++
lisp/emacs-lisp/package.el | 71 +--------
lisp/startup.el | 379 ++++++++++++++++++++++++---------------------
src/lread.c | 2 +-
9 files changed, 331 insertions(+), 307 deletions(-)
diff --git a/doc/emacs/custom.texi b/doc/emacs/custom.texi
index e27760b379..263dff7cb0 100644
--- a/doc/emacs/custom.texi
+++ b/doc/emacs/custom.texi
@@ -2575,3 +2575,20 @@ Init Non-ASCII
coding system, for your init file as well as the files you edit. For
example, don't mix the @samp{latin-1} and @samp{latin-9} coding
systems.
+
+@node Early Init File
+@subsection The Early Init File
+@cindex early init file
+
+ Most customizations for Emacs can be put in the normal init file,
+@file{.emacs} or @file{~/.emacs.d/init.el}. However, it is sometimes
+desirable to have customizations that take effect during Emacs startup
+earlier than the normal init file is processed. Such customizations
+can be put in the early init file, @file{~/.emacs.d/early-init.el}.
+This file is loaded before the package system is initialized, so in it
+you can customize variables that affect the initialization process,
+such as @code{package-enable-at-startup} and @code{package-load-list}.
+@xref{Package Installation}.
+
+ For more information on the early init file, @pxref{Early Init
+File,,, elisp, The Emacs Lisp Reference Manual}.
diff --git a/doc/emacs/package.texi b/doc/emacs/package.texi
index bc6afb7966..d5339e9124 100644
--- a/doc/emacs/package.texi
+++ b/doc/emacs/package.texi
@@ -241,57 +241,55 @@ Package Installation
package is available from a higher-priority archive. (This is
controlled by the value of @code{package-menu-hide-low-priority}.)
- Once a package is downloaded and installed, it is @dfn{loaded} into
-the current Emacs session. Loading a package is not quite the same as
-loading a Lisp library (@pxref{Lisp Libraries}); loading a package
-adds its directory to @code{load-path} and loads its autoloads. The
-effect of a package's autoloads varies from package to package. Most
-packages just make some new commands available, while others have more
+ Once a package is downloaded and installed, it is made available to
+the current Emacs session. Making a package available adds its
+directory to @code{load-path} and loads its autoloads. The effect of
+a package's autoloads varies from package to package. Most packages
+just make some new commands available, while others have more
wide-ranging effects on the Emacs session. For such information,
consult the package's help buffer.
- By default, Emacs also automatically loads all installed packages in
-subsequent Emacs sessions. This happens at startup, after processing
-the init file (@pxref{Init File}). As an exception, Emacs does not
-load packages at startup if invoked with the @samp{-q} or
-@samp{--no-init-file} options (@pxref{Initial Options}).
+ After a package is installed, it is automatically made available by
+Emacs in all subsequent sessions. This happens at startup, before
+processing the init file but after processing the early init file
+(@pxref{Early Init File,,, elisp, The Emacs Lisp Reference Manual}).
+As an exception, Emacs does not make packages available at startup if
+invoked with the @samp{-q} or @samp{--no-init-file} options
+(@xref{Initial Options}).
@vindex package-enable-at-startup
- To disable automatic package loading, change the variable
-@code{package-enable-at-startup} to @code{nil}.
+ To keep Emacs from automatically making packages available at
+startup, change the variable @code{package-enable-at-startup} to
+@code{nil}. You must do this in the early init file (@pxref{Early
+Init File,,, elisp, The Emacs Lisp Reference Manual}), as the variable
+is read before loading the regular init file. Currently this variable
+cannot be set via Customize.
@findex package-initialize
- The reason automatic package loading occurs after loading the init
-file is that user options only receive their customized values after
-loading the init file, including user options which affect the
-packaging system. In some circumstances, you may want to load
-packages explicitly in your init file (usually because some other code
-in your init file depends on a package). In that case, your init file
-should call the function @code{package-initialize}. It is up to you
-to ensure that relevant user options, such as @code{package-load-list}
-(see below), are set up prior to the @code{package-initialize} call.
-This will automatically set @code{package-enable-at-startup} to @code{nil}, to
-avoid loading the packages again after processing the init file.
-Alternatively, you may choose to completely inhibit package loading at
-startup, and invoke the command @kbd{M-x package-initialize} to load
-your packages manually.
+ If you have set @code{package-enable-at-startup} to @code{nil}, you
+can still make packages available either during or after startup. To
+make installed packages available during startup, call the function
+@code{package-initialize} in your init file. To make installed
+packages available after startup, invoke the command @kbd{M-x
+package-initialize}.
@vindex package-load-list
- For finer control over package loading, you can use the variable
-@code{package-load-list}. Its value should be a list. A list element
-of the form @code{(@var{name} @var{version})} tells Emacs to load
-version @var{version} of the package named @var{name}. Here,
-@var{version} should be a version string (corresponding to a specific
-version of the package), or @code{t} (which means to load any
-installed version), or @code{nil} (which means no version; this
-disables the package, preventing it from being loaded). A list
-element can also be the symbol @code{all}, which means to load the
-latest installed version of any package not named by the other list
-elements. The default value is just @code{'(all)}.
+ For finer control over which packages are made available at startup,
+you can use the variable @code{package-load-list}. Its value should
+be a list. A list element of the form @code{(@var{name}
+@var{version})} tells Emacs to make available version @var{version} of
+the package named @var{name}. Here, @var{version} should be a version
+string (corresponding to a specific version of the package), or
+@code{t} (which means to make available any installed version), or
+@code{nil} (which means no version; this disables the package,
+preventing it from being made available). A list element can also be
+the symbol @code{all}, which means to make available the latest
+installed version of any package not named by the other list elements.
+The default value is just @code{'(all)}.
For example, if you set @code{package-load-list} to @code{'((muse
-"3.20") all)}, then Emacs only loads version 3.20 of the @samp{muse}
-package, plus any installed version of packages other than
+"3.20") all)}, then Emacs only makes available version 3.20 of the
+@samp{muse} package, plus any installed version of packages other than
@samp{muse}. Any other version of @samp{muse} that happens to be
installed will be ignored. The @samp{muse} package will be listed in
the package menu with the @samp{held} status.
diff --git a/doc/lispref/os.texi b/doc/lispref/os.texi
index 42be60449d..cac5bfa067 100644
--- a/doc/lispref/os.texi
+++ b/doc/lispref/os.texi
@@ -95,6 +95,21 @@ Startup Summary
@item
It does some basic parsing of the command-line arguments.
+@item
+It loads your early init file (@pxref{Early Init File}). This is not
+done if the options @samp{-q}, @samp{-Q}, or @samp{--batch} were
+specified. If the @samp{-u} option was specified, Emacs looks for the
+init file in that user's home directory instead.
+
+@item
+It calls the function @code{package-initialize} to activate any
+optional Emacs Lisp package that has been installed. @xref{Packaging
+Basics}. However, Emacs doesn't initialize packages when
+@code{package-enable-at-startup} is @code{nil} or when it's started
+with one of the options @samp{-q}, @samp{-Q}, or @samp{--batch}. To
+initialize packages in the latter case, @code{package-initialize}
+should be called explicitly (e.g., via the @samp{--funcall} option).
+
@vindex initial-window-system@r{, and startup}
@vindex window-system-initialization-alist
@item
@@ -154,15 +169,6 @@ Startup Summary
(@pxref{Abbrev Files, abbrev-file-name}). This is not done if the
option @samp{--batch} was specified.
-@item
-It calls the function @code{package-initialize} to activate any
-optional Emacs Lisp package that has been installed. @xref{Packaging
-Basics}. However, Emacs doesn't initialize packages when
-@code{package-enable-at-startup} is @code{nil} or when it's started
-with one of the options @samp{-q}, @samp{-Q}, or @samp{--batch}. To
-initialize packages in the latter case, @code{package-initialize}
-should be called explicitly (e.g., via the @samp{--funcall} option).
-
@vindex after-init-time
@item
It sets the variable @code{after-init-time} to the value of
@@ -361,6 +367,7 @@ Init File
@cindex init file
@cindex @file{.emacs}
@cindex @file{init.el}
+@cindex @file{early-init.el}
When you start Emacs, it normally attempts to load your @dfn{init
file}. This is either a file named @file{.emacs} or @file{.emacs.el}
@@ -384,6 +391,19 @@ Init File
file. If those environment variables are absent, though, Emacs uses
your user-id to find your home directory.
+@cindex early init file
+ Emacs also attempts to load a second init file, called the
+@dfn{early init file}, if it exists. This is a file named
+@file{early-init.el} in your @file{~/.emacs.d} directory. The
+difference between the early init file and the regular init file is
+that the early init file is loaded much earlier during the startup
+process, so you can use it to customize some things that are
+initialized before loading the regular init file. For example, you
+can customize the process of initializing the package system, by
+setting variables such as @var{package-load-list} or
+@var{package-enable-at-startup}. @xref{Package Installation,,,
+emacs,The GNU Emacs Manual}.
+
@cindex default init file
An Emacs installation may have a @dfn{default init file}, which is a
Lisp library named @file{default.el}. Emacs finds this file through
diff --git a/doc/lispref/package.texi b/doc/lispref/package.texi
index 21dfe1c271..877aaf89a3 100644
--- a/doc/lispref/package.texi
+++ b/doc/lispref/package.texi
@@ -105,24 +105,32 @@ Packaging Basics
evaluates the autoload definitions in @file{@var{name}-autoloads.el}.
Whenever Emacs starts up, it automatically calls the function
-@code{package-initialize} to load installed packages. This is done
-after loading the init file and abbrev file (if any) and before
-running @code{after-init-hook} (@pxref{Startup Summary}). Automatic
-package loading is disabled if the user option
-@code{package-enable-at-startup} is @code{nil}.
+@code{package-initialize} to make installed packages available to the
+current session. This is done after loading the early init file, but
+before loading the regular init file (@pxref{Startup Summary}).
+Packages are not automatically made available if the user option
+@code{package-enable-at-startup} is set to @code{nil} in the early
+init file.
@deffn Command package-initialize &optional no-activate
This function initializes Emacs' internal record of which packages are
-installed, and loads them. The user option @code{package-load-list}
-specifies which packages to load; by default, all installed packages
-are loaded. If called during startup, this function also sets
+installed, and makes the packages available to the current session.
+The user option @code{package-load-list} specifies which packages to
+make available; by default, all installed packages are made available.
+If called during startup, this function also sets
@code{package-enable-at-startup} to @code{nil}, to avoid accidentally
-loading the packages twice. @xref{Package Installation,,, emacs, The
-GNU Emacs Manual}.
+evaluating package autoloads more than once. @xref{Package
+Installation,,, emacs, The GNU Emacs Manual}.
The optional argument @var{no-activate}, if non-@code{nil}, causes
Emacs to update its record of installed packages without actually
-loading them; it is for internal use only.
+making them available; it is for internal use only.
+
+In most cases, you should not need to call @code{package-initialize},
+as this is done automatically during startup. Simply make sure to put
+any code that should run before @code{package-initialize} in the early
+init file, and any code that should run after it in the primary init
+file (@xref{Init File,,, emacs, The GNU Emacs Manual}).
@end deffn
@node Simple Packages
diff --git a/doc/misc/org.texi b/doc/misc/org.texi
index aa3b029ab7..68aa01ca18 100644
--- a/doc/misc/org.texi
+++ b/doc/misc/org.texi
@@ -890,9 +890,7 @@ Installation
been visited, i.e., where no Org built-in function have been loaded.
Otherwise autoload Org functions will mess up the installation.
-Then, to make sure your Org configuration is taken into account, initialize
-the package system with @code{(package-initialize)} in your Emacs init file
-before setting any Org option. If you want to use Org's package repository,
+If you want to use Org's package repository,
check out the @uref{http://orgmode.org/elpa.html, Org ELPA page}.
@subsubheading Downloading Org as an archive
diff --git a/etc/NEWS b/etc/NEWS
index 71569c95ad..b6b884b816 100644
--- a/etc/NEWS
+++ b/etc/NEWS
@@ -49,6 +49,25 @@ to reduce differences between developer and production builds.
\f
* Startup Changes in Emacs 27.1
++++
+** Emacs can now be configured using an early init file.
+The file is called 'early-init.el', in 'user-emacs-directory'. It is
+loaded very early in the startup process: before graphical elements
+such as the tool bar are initialized, and before the package manager
+is initialized. The primary purpose is to allow customizing how the
+package system is initialized given that initialization now happens
+before loading the regular init file (see below).
+
++++
+** Emacs now calls 'package-initialize' before loading the init file.
+This is part of a change intended to eliminate the behavior of
+package.el inserting a call to 'package-initialize' into the init
+file, which was previously done when Emacs was started. As a result
+of this change, it is no longer necessary to call 'package-initialize'
+in your init file. However, if your init file changes the values of
+'package-load-list' or 'package-user-dir', then that code needs to be
+moved to the early init file (see above).
+
\f
* Changes in Emacs 27.1
diff --git a/lisp/emacs-lisp/package.el b/lisp/emacs-lisp/package.el
index 71d1c41ec3..ab02d4255b 100644
--- a/lisp/emacs-lisp/package.el
+++ b/lisp/emacs-lisp/package.el
@@ -1431,16 +1431,11 @@ package-read-all-archive-contents
;; available on disk.
(defvar package--initialized nil)
-(defvar package--init-file-ensured nil
- "Whether we know the init file has package-initialize.")
-
;;;###autoload
(defun package-initialize (&optional no-activate)
"Load Emacs Lisp packages, and activate them.
The variable `package-load-list' controls which packages to load.
If optional arg NO-ACTIVATE is non-nil, don't activate packages.
-If `user-init-file' does not mention `(package-initialize)', add
-it to the file.
If called as part of loading `user-init-file', set
`package-enable-at-startup' to nil, to prevent accidentally
loading packages twice.
@@ -1449,13 +1444,7 @@ package-initialize
taken care of by `package-initialize'."
(interactive)
(setq package-alist nil)
- (if after-init-time
- (package--ensure-init-file)
- ;; If `package-initialize' is before we finished loading the init
- ;; file, it's obvious we don't need to ensure-init.
- (setq package--init-file-ensured t
- ;; And likely we don't need to run it again after init.
- package-enable-at-startup nil))
+ (setq package-enable-at-startup nil)
(package-load-all-descriptors)
(package-read-all-archive-contents)
(unless no-activate
@@ -1872,64 +1861,6 @@ package-download-transaction
using `package-compute-transaction'."
(mapc #'package-install-from-archive packages))
-(defun package--ensure-init-file ()
- "Ensure that the user's init file has `package-initialize'.
-`package-initialize' doesn't have to be called, as long as it is
-present somewhere in the file, even as a comment. If it is not,
-add a call to it along with some explanatory comments."
- ;; Don't mess with the init-file from "emacs -Q".
- (when (and (stringp user-init-file)
- (not package--init-file-ensured)
- (file-readable-p user-init-file)
- (file-writable-p user-init-file))
- (let* ((buffer (find-buffer-visiting user-init-file))
- buffer-name
- (contains-init
- (if buffer
- (with-current-buffer buffer
- (save-excursion
- (save-restriction
- (widen)
- (goto-char (point-min))
- (re-search-forward "(package-initialize\\_>" nil 'noerror))))
- ;; Don't visit the file if we don't have to.
- (with-temp-buffer
- (insert-file-contents user-init-file)
- (goto-char (point-min))
- (re-search-forward "(package-initialize\\_>" nil 'noerror)))))
- (unless contains-init
- (with-current-buffer (or buffer
- (let ((delay-mode-hooks t)
- (find-file-visit-truename t))
- (find-file-noselect user-init-file)))
- (when buffer
- (setq buffer-name (buffer-file-name))
- (set-visited-file-name (file-chase-links user-init-file)))
- (save-excursion
- (save-restriction
- (widen)
- (goto-char (point-min))
- (while (and (looking-at-p "[[:blank:]]*\\(;\\|$\\)")
- (not (eobp)))
- (forward-line 1))
- (insert
- "\n"
- ";; Added by Package.el. This must come before configurations of\n"
- ";; installed packages. Don't delete this line. If you don't want it,\n"
- ";; just comment it out by adding a semicolon to the start of the line.\n"
- ";; You may delete these explanatory comments.\n"
- "(package-initialize)\n")
- (unless (looking-at-p "$")
- (insert "\n"))
- (let ((file-precious-flag t))
- (save-buffer))
- (if buffer
- (progn
- (set-visited-file-name buffer-name)
- (set-buffer-modified-p nil))
- (kill-buffer (current-buffer)))))))))
- (setq package--init-file-ensured t))
-
;;;###autoload
(defun package-install (pkg &optional dont-select)
"Install the package PKG.
diff --git a/lisp/startup.el b/lisp/startup.el
index 8c36c19e82..69bc8fa781 100644
--- a/lisp/startup.el
+++ b/lisp/startup.el
@@ -312,6 +312,12 @@ inhibit-startup-hooks
Currently this applies to: `emacs-startup-hook', `term-setup-hook',
and `window-setup-hook'.")
+(defvar early-init-file nil
+ "File name, including directory, of user's early init file.
+See `user-init-file'. The only difference is that
+`early-init-file' is not set during the course of evaluating the
+early init file.")
+
(defvar keyboard-type nil
"The brand of keyboard you are using.
This variable is used to define the proper function and keypad
@@ -870,6 +876,103 @@ startup--setup-quote-display
(when standard-display-table
(aset standard-display-table char nil)))))))
+(defun load-user-init-file
+ (filename-function &optional alternate-filename-function load-defaults)
+ "Load a user init-file.
+FILENAME-FUNCTION is called with no arguments and should return
+the name of the init-file to load. If this file cannot be
+loaded, and ALTERNATE-FILENAME-FUNCTION is non-nil, then it is
+called with no arguments and should return the name of an
+alternate init-file to load. If LOAD-DEFAULTS is non-nil, then
+load default.el after the init-file.
+
+This function sets `user-init-file' to the name of the loaded
+init-file, or to a default value if loading is not possible."
+ (let ((debug-on-error-from-init-file nil)
+ (debug-on-error-should-be-set nil)
+ (debug-on-error-initial
+ (if (eq init-file-debug t)
+ 'startup
+ init-file-debug)))
+ (let ((debug-on-error debug-on-error-initial)
+ ;; We create an anonymous function here so that we can call
+ ;; it in different contexts depending on the value of
+ ;; `debug-on-error'.
+ (read-init-file
+ (lambda ()
+ (when init-file-user
+ (let ((init-file-name (funcall filename-function)))
+
+ ;; If `user-init-file' is t, then `load' will store
+ ;; the name of the file that it loads into
+ ;; `user-init-file'.
+ (setq user-init-file t)
+ (load init-file-name 'noerror 'nomessage)
+
+ (when (and (eq user-init-file t) alternate-filename-function)
+ (load (funcall alternate-filename-function)
+ 'noerror 'nomessage))
+
+ ;; If we did not find the user's init file, set
+ ;; user-init-file conclusively. Don't let it be
+ ;; set from default.el.
+ (when (eq user-init-file t)
+ (setq user-init-file init-file-name)))
+
+ ;; If we loaded a compiled file, set `user-init-file' to
+ ;; the source version if that exists.
+ (when (equal (file-name-extension user-init-file)
+ "elc")
+ (let* ((source (file-name-sans-extension user-init-file))
+ (alt (concat source ".el")))
+ (setq source (cond ((file-exists-p alt) alt)
+ ((file-exists-p source) source)
+ (t nil)))
+ (when source
+ (when (file-newer-than-file-p source user-init-file)
+ (message "Warning: %s is newer than %s"
+ source user-init-file)
+ (sit-for 1))
+ (setq user-init-file source))))
+
+ (when load-defaults
+
+ ;; Prevent default.el from changing the value of
+ ;; `inhibit-startup-screen'.
+ (let ((inhibit-startup-screen nil))
+ (load "default" 'noerror 'nomessage)))))))
+ ;; Now call our anonymous function.
+ (if init-file-debug
+ ;; Do this without a `condition-case' if the user wants to
+ ;; debug.
+ (funcall read-init-file)
+ (condition-case error
+ (funcall read-init-file)
+ (error
+ (display-warning
+ 'initialization
+ (format-message "\
+An error occurred while loading `%s':\n\n%s%s%s\n\n\
+To ensure normal operation, you should investigate and remove the
+cause of the error in your initialization file. Start Emacs with
+the `--debug-init' option to view a complete error backtrace."
+ user-init-file
+ (get (car error) 'error-message)
+ (if (cdr error) ": " "")
+ (mapconcat (lambda (s) (prin1-to-string s t))
+ (cdr error) ", "))
+ :warning)
+ (setq init-file-had-error t))))
+
+ ;; If we can tell that the init file altered debug-on-error,
+ ;; arrange to preserve the value that it set up.
+ (or (eq debug-on-error debug-on-error-initial)
+ (setq debug-on-error-should-be-set t
+ debug-on-error-from-init-file debug-on-error)))
+
+ (when debug-on-error-should-be-set
+ (setq debug-on-error debug-on-error-from-init-file))))
+
(defun command-line ()
"A subroutine of `normal-top-level'.
Amongst another things, it parses the command-line arguments."
@@ -1021,6 +1124,69 @@ command-line
(and command-line-args
(setcdr command-line-args args)))
+ ;; Warn for invalid user name.
+ (when init-file-user
+ (if (string-match "[~/:\n]" init-file-user)
+ (display-warning 'initialization
+ (format "Invalid user name %s"
+ init-file-user)
+ :error)
+ (if (file-directory-p (expand-file-name
+ ;; We don't support ~USER on MS-Windows
+ ;; and MS-DOS except for the current
+ ;; user, and always load .emacs from
+ ;; the current user's home directory
+ ;; (see below). So always check "~",
+ ;; even if invoked with "-u USER", or
+ ;; if $USER or $LOGNAME are set to
+ ;; something different.
+ (if (memq system-type '(windows-nt ms-dos))
+ "~"
+ (concat "~" init-file-user))))
+ nil
+ (display-warning 'initialization
+ (format "User %s has no home directory"
+ (if (equal init-file-user "")
+ (user-real-login-name)
+ init-file-user))
+ :error))))
+
+ ;; Load the early init file, if found.
+ (load-user-init-file
+ (lambda ()
+ (expand-file-name
+ "early-init"
+ (file-name-as-directory
+ (concat "~" init-file-user "/.emacs.d")))))
+ (setq early-init-file user-init-file)
+
+ ;; If any package directory exists, initialize the package system.
+ (and user-init-file
+ package-enable-at-startup
+ (catch 'package-dir-found
+ (let (dirs)
+ (if (boundp 'package-directory-list)
+ (setq dirs package-directory-list)
+ (dolist (f load-path)
+ (and (stringp f)
+ (equal (file-name-nondirectory f) "site-lisp")
+ (push (expand-file-name "elpa" f) dirs))))
+ (push (if (boundp 'package-user-dir)
+ package-user-dir
+ (locate-user-emacs-file "elpa"))
+ dirs)
+ (dolist (dir dirs)
+ (when (file-directory-p dir)
+ (dolist (subdir (directory-files dir))
+ (when (let ((subdir (expand-file-name subdir dir)))
+ (and (file-directory-p subdir)
+ (file-exists-p
+ (expand-file-name
+ (package--description-file subdir)
+ subdir))))
+ (throw 'package-dir-found t)))))))
+ (package-initialize))
+
;; Make sure window system's init file was loaded in loadup.el if
;; using a window system.
;; Initialize the window-system only after processing the command-line
@@ -1128,153 +1294,47 @@ command-line
;; the startup screen.
(setq inhibit-startup-screen nil)
- ;; Warn for invalid user name.
- (when init-file-user
- (if (string-match "[~/:\n]" init-file-user)
- (display-warning 'initialization
- (format "Invalid user name %s"
- init-file-user)
- :error)
- (if (file-directory-p (expand-file-name
- ;; We don't support ~USER on MS-Windows
- ;; and MS-DOS except for the current
- ;; user, and always load .emacs from
- ;; the current user's home directory
- ;; (see below). So always check "~",
- ;; even if invoked with "-u USER", or
- ;; if $USER or $LOGNAME are set to
- ;; something different.
- (if (memq system-type '(windows-nt ms-dos))
- "~"
- (concat "~" init-file-user))))
- nil
- (display-warning 'initialization
- (format "User %s has no home directory"
- (if (equal init-file-user "")
- (user-real-login-name)
- init-file-user))
- :error))))
-
;; Load that user's init file, or the default one, or none.
- (let (debug-on-error-from-init-file
- debug-on-error-should-be-set
- (debug-on-error-initial
- (if (eq init-file-debug t) 'startup init-file-debug)))
- (let ((debug-on-error debug-on-error-initial)
- ;; This function actually reads the init files.
- (inner
- (function
- (lambda ()
- (if init-file-user
- (let ((user-init-file-1
- (cond
- ((eq system-type 'ms-dos)
- (concat "~" init-file-user "/_emacs"))
- ((not (eq system-type 'windows-nt))
- (concat "~" init-file-user "/.emacs"))
- ;; Else deal with the Windows situation
- ((directory-files "~" nil "^\\.emacs\\(\\.elc?\\)?$")
- ;; Prefer .emacs on Windows.
- "~/.emacs")
- ((directory-files "~" nil "^_emacs\\(\\.elc?\\)?$")
- ;; Also support _emacs for compatibility, but warn about it.
- (push `(initialization
- ,(format-message
- "`_emacs' init file is deprecated, please use `.emacs'"))
- delayed-warnings-list)
- "~/_emacs")
- (t ;; But default to .emacs if _emacs does not exist.
- "~/.emacs"))))
- ;; This tells `load' to store the file name found
- ;; into user-init-file.
- (setq user-init-file t)
- (load user-init-file-1 t t)
-
- (when (eq user-init-file t)
- ;; If we did not find ~/.emacs, try
- ;; ~/.emacs.d/init.el.
- (let ((otherfile
- (expand-file-name
- "init"
- (file-name-as-directory
- (concat "~" init-file-user "/.emacs.d")))))
- (load otherfile t t)
-
- ;; If we did not find the user's init file,
- ;; set user-init-file conclusively.
- ;; Don't let it be set from default.el.
- (when (eq user-init-file t)
- (setq user-init-file user-init-file-1))))
-
- ;; If we loaded a compiled file, set
- ;; `user-init-file' to the source version if that
- ;; exists.
- (when (and user-init-file
- (equal (file-name-extension user-init-file)
- "elc"))
- (let* ((source (file-name-sans-extension user-init-file))
- (alt (concat source ".el")))
- (setq source (cond ((file-exists-p alt) alt)
- ((file-exists-p source) source)
- (t nil)))
- (when source
- (when (file-newer-than-file-p source user-init-file)
- (message "Warning: %s is newer than %s"
- source user-init-file)
- (sit-for 1))
- (setq user-init-file source))))
-
- (unless inhibit-default-init
- (let ((inhibit-startup-screen nil))
- ;; Users are supposed to be told their rights.
- ;; (Plus how to get help and how to undo.)
- ;; Don't you dare turn this off for anyone
- ;; except yourself.
- (load "default" t t)))))))))
- (if init-file-debug
- ;; Do this without a condition-case if the user wants to debug.
- (funcall inner)
- (condition-case error
- (progn
- (funcall inner)
- (setq init-file-had-error nil))
- (error
- (display-warning
- 'initialization
- (format-message "\
-An error occurred while loading `%s':\n\n%s%s%s\n\n\
-To ensure normal operation, you should investigate and remove the
-cause of the error in your initialization file. Start Emacs with
-the `--debug-init' option to view a complete error backtrace."
- user-init-file
- (get (car error) 'error-message)
- (if (cdr error) ": " "")
- (mapconcat (lambda (s) (prin1-to-string s t))
- (cdr error) ", "))
- :warning)
- (setq init-file-had-error t))))
-
- (if (and deactivate-mark transient-mark-mode)
- (with-current-buffer (window-buffer)
- (deactivate-mark)))
-
- ;; If the user has a file of abbrevs, read it (unless -batch).
- (when (and (not noninteractive)
- (file-exists-p abbrev-file-name)
- (file-readable-p abbrev-file-name))
- (quietly-read-abbrev-file abbrev-file-name))
-
- ;; If the abbrevs came entirely from the init file or the
- ;; abbrevs file, they do not need saving.
- (setq abbrevs-changed nil)
-
- ;; If we can tell that the init file altered debug-on-error,
- ;; arrange to preserve the value that it set up.
- (or (eq debug-on-error debug-on-error-initial)
- (setq debug-on-error-should-be-set t
- debug-on-error-from-init-file debug-on-error)))
- (if debug-on-error-should-be-set
- (setq debug-on-error debug-on-error-from-init-file)))
+ (load-user-init-file
+ (lambda ()
+ (cond
+ ((eq system-type 'ms-dos)
+ (concat "~" init-file-user "/_emacs"))
+ ((not (eq system-type 'windows-nt))
+ (concat "~" init-file-user "/.emacs"))
+ ;; Else deal with the Windows situation.
+ ((directory-files "~" nil "^\\.emacs\\(\\.elc?\\)?$")
+ ;; Prefer .emacs on Windows.
+ "~/.emacs")
+ ((directory-files "~" nil "^_emacs\\(\\.elc?\\)?$")
+ ;; Also support _emacs for compatibility, but warn about it.
+ (push `(initialization
+ ,(format-message
+ "`_emacs' init file is deprecated, please use `.emacs'"))
+ delayed-warnings-list)
+ "~/_emacs")
+ (t ;; But default to .emacs if _emacs does not exist.
+ "~/.emacs")))
+ (lambda ()
+ (expand-file-name
+ "init"
+ (file-name-as-directory
+ (concat "~" init-file-user "/.emacs.d"))))
+ (not inhibit-default-init))
+
+ (when (and deactivate-mark transient-mark-mode)
+ (with-current-buffer (window-buffer)
+ (deactivate-mark)))
+
+ ;; If the user has a file of abbrevs, read it (unless -batch).
+ (when (and (not noninteractive)
+ (file-exists-p abbrev-file-name)
+ (file-readable-p abbrev-file-name))
+ (quietly-read-abbrev-file abbrev-file-name))
+
+ ;; If the abbrevs came entirely from the init file or the
+ ;; abbrevs file, they do not need saving.
+ (setq abbrevs-changed nil)
;; Do this here in case the init file sets mail-host-address.
(and mail-host-address
@@ -1296,33 +1356,6 @@ command-line
(eq face-ignored-fonts old-face-ignored-fonts))
(clear-face-cache)))
- ;; If any package directory exists, initialize the package system.
- (and user-init-file
- package-enable-at-startup
- (catch 'package-dir-found
- (let (dirs)
- (if (boundp 'package-directory-list)
- (setq dirs package-directory-list)
- (dolist (f load-path)
- (and (stringp f)
- (equal (file-name-nondirectory f) "site-lisp")
- (push (expand-file-name "elpa" f) dirs))))
- (push (if (boundp 'package-user-dir)
- package-user-dir
- (locate-user-emacs-file "elpa"))
- dirs)
- (dolist (dir dirs)
- (when (file-directory-p dir)
- (dolist (subdir (directory-files dir))
- (when (let ((subdir (expand-file-name subdir dir)))
- (and (file-directory-p subdir)
- (file-exists-p
- (expand-file-name
- (package--description-file subdir)
- subdir))))
- (throw 'package-dir-found t)))))))
- (package-initialize))
-
(setq after-init-time (current-time))
;; Display any accumulated warnings after all functions in
;; `after-init-hook' like `desktop-read' have finalized possible
diff --git a/src/lread.c b/src/lread.c
index 7cacd47d51..d009bd0cd2 100644
--- a/src/lread.c
+++ b/src/lread.c
@@ -4922,7 +4922,7 @@ directory. These file names are converted to absolute at startup. */);
If the file loaded had extension `.elc', and the corresponding source file
exists, this variable contains the name of source file, suitable for use
by functions like `custom-save-all' which edit the init file.
-While Emacs loads and evaluates the init file, value is the real name
+While Emacs loads and evaluates any init file, value is the real name
of the file, regardless of whether or not it has the `.elc' extension. */);
Vuser_init_file = Qnil;
--
2.16.1
next prev parent reply other threads:[~2018-02-15 4:40 UTC|newest]
Thread overview: 838+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-18 21:57 [PATCH] Fixing package-initialize, adding early init file Radon Rosborough
2017-09-19 12:30 ` Stefan Monnier
2017-09-25 16:27 ` Radon Rosborough
2017-09-25 16:54 ` John Wiegley
2017-09-25 19:38 ` Radon Rosborough
2017-09-25 21:23 ` Mark Oteiza
2017-09-25 22:16 ` Radon Rosborough
2017-09-25 23:15 ` Mark Oteiza
2017-09-26 3:00 ` Radon Rosborough
2017-09-29 10:22 ` Eli Zaretskii
2017-09-25 16:58 ` Stefan Monnier
2017-09-25 19:40 ` Radon Rosborough
2017-10-09 23:17 ` Radon Rosborough
2017-10-10 16:52 ` Robert Weiner
2017-10-10 16:59 ` Eli Zaretskii
2017-10-14 21:30 ` Mark Oteiza
2017-10-14 21:52 ` Stefan Monnier
2017-10-15 1:18 ` Radon Rosborough
2017-10-15 14:16 ` Eli Zaretskii
2017-10-15 16:26 ` Stefan Monnier
2017-10-25 22:13 ` Radon Rosborough
2017-10-26 0:11 ` Stefan Monnier
2017-12-18 0:45 ` Radon Rosborough
2018-01-25 4:35 ` Radon Rosborough
2018-01-25 15:43 ` Clément Pit-Claudel
2018-01-25 16:03 ` Stefan Monnier
2018-01-25 16:22 ` Clément Pit-Claudel
2018-01-25 17:12 ` Stefan Monnier
2018-01-26 9:31 ` Eli Zaretskii
2018-01-26 14:34 ` Loading a package applies automatically to future sessions? Richard Stallman
2018-01-26 17:03 ` Stefan Monnier
2018-01-28 12:07 ` Richard Stallman
2018-01-28 13:24 ` Stefan Monnier
2018-01-29 1:50 ` Richard Stallman
2018-01-29 5:56 ` Radon Rosborough
2018-02-02 2:14 ` Richard Stallman
2018-02-02 3:05 ` Clément Pit-Claudel
2018-02-04 3:08 ` Richard Stallman
2018-02-04 15:21 ` Clément Pit-Claudel
2018-02-04 21:27 ` Tim Cross
2018-02-05 10:07 ` George Plymale II
2018-02-05 21:27 ` Tim Cross
2018-02-05 1:08 ` Richard Stallman
2018-02-05 4:15 ` Clément Pit-Claudel
2018-02-05 20:36 ` Richard Stallman
2018-01-26 19:24 ` Radon Rosborough
2018-01-26 20:02 ` Eli Zaretskii
2018-01-28 18:20 ` Radon Rosborough
2018-01-29 1:52 ` Richard Stallman
2018-02-10 12:00 ` Eli Zaretskii
2018-02-11 1:23 ` George Plymale II
2018-02-13 21:14 ` Stefan's patch to improve package loading (was Loading a package applies automatically to future sessions?) George Plymale II
2018-02-14 2:56 ` John Wiegley
2018-02-14 23:32 ` George Plymale II
2018-03-09 2:54 ` Stefan's patch to improve package loading George Plymale II
2018-02-15 4:40 ` Radon Rosborough [this message]
2018-01-27 20:44 ` Loading a package applies automatically to future sessions? Richard Stallman
2018-01-28 6:30 ` Radon Rosborough
2018-01-28 9:33 ` Charles A. Roelli
2018-01-28 13:21 ` Stefan Monnier
2018-01-28 17:32 ` Radon Rosborough
2018-01-28 22:11 ` Stefan Monnier
2018-01-29 1:08 ` T.V Raman
2018-01-29 5:53 ` Radon Rosborough
2018-01-29 7:21 ` John Wiegley
2018-01-29 18:54 ` Stefan Monnier
2018-01-29 19:19 ` John Wiegley
2018-01-29 19:55 ` Stefan Monnier
2018-01-29 6:55 ` John Wiegley
2018-01-29 19:08 ` Stefan Monnier
2018-01-29 19:55 ` John Wiegley
2018-01-29 21:50 ` Stefan Monnier
2018-01-29 23:13 ` Clément Pit-Claudel
2018-01-30 1:37 ` T.V Raman
2018-01-29 20:18 ` Clément Pit-Claudel
2018-01-30 15:11 ` Stefan Monnier
2018-01-30 22:33 ` George Plymale II
2018-01-30 22:56 ` George Plymale II
2018-01-31 3:47 ` Stefan Monnier
2018-01-31 5:17 ` George Plymale II
2018-01-31 20:49 ` George Plymale II
2018-01-31 21:35 ` Stefan Monnier
2018-01-31 21:58 ` George Plymale II
2018-01-31 22:06 ` George Plymale II
2018-02-01 14:48 ` Stefan Monnier
2018-02-01 17:47 ` George Plymale II
2018-02-01 19:11 ` Stefan Monnier
2018-02-01 19:19 ` Stephen Berman
2018-02-01 19:28 ` Stephen Berman
2018-02-01 21:44 ` George Plymale II
2018-02-01 22:16 ` Stephen Berman
2018-02-01 23:02 ` George Plymale II
2018-02-02 8:43 ` Eli Zaretskii
2018-02-02 17:19 ` George Plymale II
2018-02-02 17:57 ` Stefan Monnier
2018-02-02 18:06 ` Eli Zaretskii
2018-02-02 12:19 ` Phillip Lord
2018-02-02 19:20 ` Radon Rosborough
2018-02-02 22:53 ` Richard Stallman
2018-02-05 9:17 ` A response to RMS (was Loading a package applies automatically to future sessions?) George Plymale II
2018-02-05 12:55 ` Clément Pit-Claudel
2018-02-06 23:34 ` George Plymale II
2018-02-05 20:36 ` Richard Stallman
2018-02-06 23:42 ` George Plymale II
2018-02-07 20:45 ` Richard Stallman
2018-02-05 20:36 ` Richard Stallman
2018-02-05 20:36 ` Richard Stallman
2018-02-06 15:06 ` Loading a package applies automatically to future sessions? Sam Steingold
2018-02-02 22:53 ` Richard Stallman
2018-02-02 23:12 ` Stephen Berman
2018-02-03 19:13 ` Richard Stallman
2018-02-03 20:40 ` Stephen Berman
2018-02-04 3:07 ` Richard Stallman
2018-02-05 9:26 ` George Plymale II
2018-02-05 9:22 ` Finding an online resource for the agreement (was Loading a package applies automatically to future sessions?) George Plymale II
2018-02-02 2:14 ` Loading a package applies automatically to future sessions? Richard Stallman
2018-02-02 7:25 ` George Plymale II
2018-02-02 9:39 ` Eli Zaretskii
2018-02-02 17:07 ` George Plymale II
2018-02-02 17:59 ` Stefan Monnier
2018-02-02 22:56 ` Richard Stallman
2018-02-14 22:28 ` Richard Stallman
2018-02-14 23:18 ` George Plymale II
2018-02-02 8:39 ` Eli Zaretskii
2018-02-02 17:21 ` George Plymale II
2018-02-02 18:08 ` Eli Zaretskii
2018-02-02 2:12 ` Richard Stallman
2018-02-02 6:15 ` George Plymale II
2018-02-04 3:07 ` Richard Stallman
2018-02-05 9:35 ` Another response to RMS (was Loading a package applies automatically to future sessions?) George Plymale II
2018-02-05 20:37 ` Richard Stallman
2018-02-06 23:47 ` George Plymale II
2018-02-02 2:13 ` Loading a package applies automatically to future sessions? Richard Stallman
2018-02-01 19:24 ` Richard Stallman
2018-02-01 21:36 ` George Plymale II
2018-02-02 2:08 ` Tim Landscheidt
2018-02-02 22:53 ` Richard Stallman
2018-02-02 2:17 ` Richard Stallman
2018-02-02 6:26 ` George Plymale II
2018-02-02 9:26 ` Eli Zaretskii
2018-02-02 17:14 ` George Plymale II
2018-02-02 22:56 ` Richard Stallman
2018-02-05 9:19 ` George Plymale II
2018-02-05 20:36 ` Richard Stallman
2018-02-06 23:44 ` George Plymale II
2018-02-02 2:17 ` Richard Stallman
2018-02-02 7:33 ` George Plymale II
2018-02-02 18:38 ` Drew Adams
2018-02-02 19:05 ` Generations (was: Loading a package applies automatically to future sessions?) Stefan Monnier
2018-02-02 21:40 ` Drew Adams
2018-02-02 22:57 ` Richard Stallman
2018-02-02 23:03 ` Drew Adams
2018-02-02 20:36 ` Loading a package applies automatically to future sessions? Phillip Lord
2018-02-02 2:17 ` Richard Stallman
2018-02-02 7:24 ` George Plymale II
2018-02-02 22:28 ` Paul Eggert
2018-02-05 8:21 ` George Plymale II
2018-02-05 20:36 ` Richard Stallman
2018-02-04 3:09 ` Richard Stallman
2018-02-02 13:37 ` Clément Pit-Claudel
2018-02-02 17:20 ` Drew Adams
2018-02-05 4:51 ` Herring, Davis
2018-02-01 19:47 ` Stefan Monnier
2018-02-01 22:10 ` George Plymale II
2018-02-01 22:44 ` George Plymale II
2018-02-02 1:54 ` Stefan Monnier
2018-02-02 20:32 ` George Plymale II
2018-01-31 3:51 ` T.V Raman
2018-01-31 5:18 ` George Plymale II
2018-01-31 6:56 ` Tim Cross
2018-01-31 7:07 ` George Plymale II
2018-01-31 8:05 ` John Wiegley
2018-02-01 7:26 ` Tim Cross
2018-02-01 15:00 ` Stefan Monnier
2018-02-01 16:23 ` T.V Raman
2018-02-03 0:39 ` Tim Cross
2018-02-05 9:24 ` George Plymale II
2018-01-29 1:50 ` Richard Stallman
2018-01-25 17:07 ` [PATCH] Fixing package-initialize, adding early init file Stefan Monnier
2018-01-28 19:42 ` Radon Rosborough
2018-01-30 15:02 ` Stefan Monnier
2018-01-30 15:44 ` Eli Zaretskii
2018-02-01 3:12 ` Mark Oteiza
2018-02-01 4:22 ` Radon Rosborough
2018-02-01 13:36 ` Stefan Monnier
2018-02-18 5:40 ` Stefan Monnier
2018-02-08 5:54 ` Radon Rosborough
2018-02-08 15:27 ` Eli Zaretskii
2018-01-30 19:30 ` Radon Rosborough
2018-02-10 11:56 ` Eli Zaretskii
2018-02-10 23:37 ` Stefan Monnier
2018-02-11 3:26 ` Radon Rosborough
2018-02-11 14:45 ` Stefan Monnier
2018-02-11 13:31 ` Basil L. Contovounesios
2018-02-15 4:38 ` Radon Rosborough
2018-02-15 15:54 ` Drew Adams
2018-02-15 16:25 ` Stefan Monnier
2018-02-15 19:32 ` John Wiegley
2018-02-15 21:13 ` Stefan Monnier
2018-02-16 7:00 ` John Wiegley
2018-02-17 11:38 ` Eli Zaretskii
2018-02-17 14:14 ` Clément Pit-Claudel
2018-02-17 18:17 ` Radon Rosborough
2018-02-18 18:26 ` Basil L. Contovounesios
2018-02-18 18:55 ` Radon Rosborough
2018-02-19 3:10 ` Stefan Monnier
2018-02-20 19:13 ` Basil L. Contovounesios
2018-02-20 19:26 ` Basil L. Contovounesios
2018-02-20 20:35 ` Radon Rosborough
2018-02-21 3:48 ` T.V Raman
2018-02-21 8:16 ` Stefan Monnier
2018-02-21 20:48 ` Radon Rosborough
2018-02-21 21:26 ` Stefan Monnier
2018-02-21 3:43 ` T.V Raman
2017-10-10 19:03 ` Radon Rosborough
2017-10-10 19:31 ` Robert Weiner
2017-10-10 19:41 ` Radon Rosborough
2017-10-13 21:29 ` John Wiegley
2017-10-14 0:49 ` Radon Rosborough
2017-10-14 5:15 ` João Távora
2017-10-14 6:19 ` Radon Rosborough
2017-10-14 9:04 ` João Távora
2017-10-14 13:47 ` Stefan Monnier
-- strict thread matches above, loose matches on Subject: below --
2020-11-01 16:08 bounds-of-thing-at-point for paragraphs Christopher Dimech
2020-11-01 18:22 ` Jean Louis
2020-11-01 18:34 ` Christopher Dimech
2020-11-01 18:45 ` Drew Adams
2020-11-01 18:52 ` Jean Louis
2020-11-01 19:00 ` Drew Adams
2020-11-01 20:07 ` Christopher Dimech
2020-11-01 22:06 ` Drew Adams
2020-11-01 22:36 ` Christopher Dimech
2020-11-01 22:47 ` Jean Louis
2020-11-01 22:52 ` Drew Adams
2020-11-01 23:14 ` Christopher Dimech
2020-11-02 1:07 ` Drew Adams
2020-11-02 4:09 ` Robert Thorpe
2020-11-02 15:41 ` Drew Adams
2020-11-03 6:00 ` Corwin Brust
2020-11-03 6:40 ` Stefan Kangas
2020-11-03 7:41 ` Corwin Brust
2020-11-03 16:07 ` Drew Adams
2020-11-06 23:45 ` Corwin Brust
2020-11-07 1:26 ` Stefan Kangas
2020-11-02 6:07 ` finder-commentary Jean Louis
2020-11-02 15:48 ` finder-commentary Drew Adams
2020-11-02 16:02 ` finder-commentary Drew Adams
2020-11-02 16:58 ` finder-commentary Jean Louis
2020-11-02 17:27 ` finder-commentary Drew Adams
2020-11-01 22:49 ` RE: RE: bounds-of-thing-at-point for paragraphs Jean Louis
2020-11-01 22:51 ` Drew Adams
2020-11-01 23:10 ` Christopher Dimech
2020-11-02 1:05 ` Drew Adams
2020-11-01 20:36 ` Jean Louis
2020-11-01 21:32 ` Michael Heerdegen
2020-11-01 21:43 ` Jean Louis
2020-11-01 21:43 ` Jean Louis
2020-11-01 19:27 ` Eli Zaretskii
2020-11-01 19:51 ` Christopher Dimech
2020-11-01 20:00 ` Eli Zaretskii
2020-11-01 20:09 ` Christopher Dimech
2020-11-01 20:13 ` Eli Zaretskii
2020-11-01 20:27 ` Emanuel Berg via Users list for the GNU Emacs text editor
2020-11-01 20:31 ` Christopher Dimech
2020-11-01 22:10 ` Emanuel Berg via Users list for the GNU Emacs text editor
2020-11-01 21:46 ` Drew Adams
2020-11-01 20:23 ` Michael Heerdegen
2020-11-01 20:29 ` Christopher Dimech
2020-11-01 22:10 ` Drew Adams
2020-11-01 21:01 ` Stefan Monnier
2020-11-01 18:45 ` Jean Louis
2020-11-01 18:51 ` Drew Adams
2020-10-08 15:30 Proposal for an Emacs User Survey Adrien Brochard
2020-10-08 17:27 ` Philip K.
2020-10-08 17:45 ` Adrien Brochard
2020-10-09 11:30 ` Philip K.
2020-10-09 14:37 ` tomas
2020-10-09 17:23 ` Adrien Brochard
2020-10-09 18:17 ` Philip K.
2020-10-09 19:52 ` Adrien Brochard
2020-10-10 3:56 ` Richard Stallman
2020-10-10 9:36 ` Philip K.
2020-10-10 16:33 ` Drew Adams
2020-10-10 18:02 ` Dmitry Gutov
2020-10-11 10:46 ` Jean Louis
2020-10-11 18:42 ` Philip K.
2020-10-11 19:46 ` Jean Louis
2020-10-11 1:00 ` Drew Adams
2020-10-10 10:35 ` Philip K.
2020-10-11 5:24 ` Richard Stallman
2020-10-11 17:59 ` Philip K.
2020-10-12 2:03 ` Richard Stallman
2020-10-11 7:31 ` Tomas Hlavaty
2020-10-11 12:04 ` Jean Louis
2020-10-11 17:47 ` Philip K.
2020-10-09 17:59 ` Jean Louis
2020-10-09 0:41 ` Karl Fogel
2020-10-09 1:26 ` Adrien Brochard
2020-10-10 3:52 ` Richard Stallman
2020-10-10 21:44 ` Dmitry Gutov
2020-10-12 2:04 ` Richard Stallman
2020-10-09 3:35 ` Richard Stallman
2020-10-09 18:01 ` Jean Louis
2020-10-09 23:12 ` Adrien Brochard
2020-10-09 23:31 ` Drew Adams
2020-10-09 23:36 ` Adrien Brochard
2020-10-10 2:21 ` Drew Adams
2020-10-10 2:40 ` Adrien Brochard
2020-10-10 3:53 ` Drew Adams
2020-10-10 8:09 ` Teemu Likonen
2020-10-10 10:45 ` Rasmus
2020-10-11 10:32 ` Jean Louis
2020-10-11 15:15 ` Drew Adams
2020-10-11 18:25 ` Jean Louis
2020-10-11 19:47 ` Drew Adams
2020-10-11 20:36 ` Jean Louis
2020-10-13 3:48 ` How to request changes in Emacs Richard Stallman
2020-10-13 4:59 ` Jean Louis
2020-10-16 4:00 ` Richard Stallman
2020-10-16 4:47 ` Drew Adams
2020-10-13 15:56 ` Drew Adams
2020-10-14 4:42 ` Richard Stallman
2020-10-14 5:12 ` Drew Adams
2020-10-11 20:19 ` Proposal for an Emacs User Survey Drew Adams
2020-10-11 20:42 ` Jean Louis
2020-10-11 18:33 ` Philip K.
2020-10-11 18:45 ` Jean Louis
2020-10-13 3:48 ` Richard Stallman
2020-10-11 19:47 ` Drew Adams
2020-10-11 20:33 ` Jean Louis
2020-10-11 23:24 ` Drew Adams
2020-10-12 4:10 ` Jean Louis
2020-10-12 17:35 ` Drew Adams
2020-10-12 18:33 ` Jean Louis
2020-10-12 18:41 ` Drew Adams
2020-10-11 20:54 ` Jean Louis
2020-10-12 14:32 ` Adrien Brochard
2020-10-10 10:54 ` Thibaut Verron
2020-10-10 13:50 ` Philip K.
2020-10-12 14:36 ` Adrien Brochard
2020-10-11 11:58 ` Jean Louis
2020-10-12 14:36 ` Adrien Brochard
2020-10-10 13:17 ` Rasmus
2020-10-12 14:41 ` Adrien Brochard
2020-10-11 5:23 ` Richard Stallman
2020-10-11 7:35 ` Vasilij Schneidermann
2020-10-11 12:08 ` Jean Louis
2020-10-11 12:50 ` Vasilij Schneidermann
2020-10-11 17:15 ` Jean Louis
2020-10-11 17:36 ` Thibaut Verron
2020-10-11 18:13 ` Brett Gilio
2020-10-11 18:27 ` Thibaut Verron
2020-10-11 18:44 ` Jean Louis
2020-10-11 18:58 ` Thibaut Verron
2020-10-11 20:12 ` Jean Louis
2020-10-11 18:34 ` Jean Louis
2020-10-11 19:15 ` Thibaut Verron
2020-10-11 19:22 ` Qiantan Hong
2020-10-13 3:47 ` Richard Stallman
2020-10-11 20:26 ` Jean Louis
2020-10-12 2:04 ` Richard Stallman
2020-10-12 3:32 ` Thibaut Verron
2020-10-12 5:04 ` Jean Louis
2020-10-12 5:33 ` Thibaut Verron
2020-10-12 6:29 ` Jean Louis
2020-10-12 6:58 ` Thibaut Verron
2020-10-12 8:16 ` Jean Louis
2020-10-12 8:37 ` Thibaut Verron
2020-10-12 14:09 ` Jean Louis
2020-10-12 7:54 ` Ihor Radchenko
2020-10-12 8:34 ` Jean Louis
2020-10-12 8:54 ` Ihor Radchenko
2020-10-12 16:36 ` Jean Louis
2020-10-13 3:53 ` Richard Stallman
2020-10-13 5:25 ` Jean Louis
2020-10-15 3:59 ` Richard Stallman
2020-10-15 5:19 ` Jean Louis
2020-10-13 3:53 ` Richard Stallman
2020-10-13 5:27 ` Jean Louis
2020-10-16 3:59 ` Richard Stallman
2020-10-16 6:02 ` Marcel Ventosa
2020-10-16 6:52 ` Thibaut Verron
2020-10-16 7:24 ` Marcel Ventosa
2020-10-16 7:53 ` Thibaut Verron
2020-10-16 8:25 ` Marcel Ventosa
2020-10-16 12:17 ` Dmitry Gutov
2020-10-16 13:45 ` Marcel Ventosa
2020-10-16 14:04 ` Dmitry Gutov
2020-10-16 14:33 ` Marcel Ventosa
2020-10-16 14:58 ` Thibaut Verron
2020-10-16 15:51 ` Alfred M. Szmidt
2020-10-16 16:10 ` Thibaut Verron
2020-10-16 16:16 ` Alfred M. Szmidt
2020-10-16 16:32 ` Thibaut Verron
2020-10-16 16:50 ` Alfred M. Szmidt
2020-10-16 17:16 ` Thibaut Verron
2020-10-16 17:32 ` Alfred M. Szmidt
2020-10-16 17:55 ` Thibaut Verron
2020-10-16 18:16 ` Alfred M. Szmidt
2020-10-17 4:20 ` Richard Stallman
2020-10-17 4:50 ` Thibaut Verron
2020-10-17 5:44 ` Jean Louis
2020-10-17 6:42 ` Thibaut Verron
2020-10-17 7:52 ` Jean Louis
2020-10-18 4:16 ` Richard Stallman
2020-10-18 5:49 ` Jean Louis
2020-10-18 4:16 ` Richard Stallman
2020-10-18 5:52 ` Jean Louis
2020-10-18 4:16 ` Richard Stallman
2020-10-18 8:36 ` Thibaut Verron
2020-10-20 5:10 ` Richard Stallman
2020-10-17 9:42 ` Yuri Khan
2020-10-16 15:36 ` Ergus
2020-10-16 19:08 ` Dmitry Gutov
2020-10-16 19:52 ` Jean Louis
2020-10-16 20:16 ` Dmitry Gutov
2020-10-16 20:17 ` Alfred M. Szmidt
2020-10-17 11:40 ` Marcel Ventosa
2020-10-17 19:51 ` Dmitry Gutov
2020-10-17 21:38 ` Alfred M. Szmidt
2020-10-18 2:58 ` Marcel Ventosa
2020-10-16 19:22 ` Jean Louis
2020-10-16 19:17 ` Jean Louis
2020-10-16 19:36 ` Dmitry Gutov
2020-10-16 19:43 ` Dmitry Gutov
2020-10-16 20:03 ` Jean Louis
2020-10-16 20:29 ` Thibaut Verron
2020-10-16 20:40 ` Jean Louis
2020-10-17 4:19 ` Richard Stallman
2020-10-17 5:02 ` Thibaut Verron
2020-10-17 13:13 ` Stefan Monnier
2020-10-17 5:07 ` Jean Louis
2020-10-17 12:34 ` Andy Moreton
2020-10-17 15:56 ` Alfred M. Szmidt
2020-10-17 16:13 ` Eli Zaretskii
2020-10-17 21:38 ` Alfred M. Szmidt
2020-10-18 2:40 ` Eli Zaretskii
2020-10-18 4:13 ` Richard Stallman
2020-10-18 15:20 ` Alfred M. Szmidt
2020-10-16 21:10 ` Dmitry Gutov
2020-10-16 22:02 ` Jean Louis
2020-10-16 19:08 ` Jean Louis
2020-10-16 19:47 ` Drew Adams
2020-10-16 20:15 ` Jean Louis
2020-10-16 20:59 ` Drew Adams
2020-10-16 21:50 ` Jean Louis
2020-10-17 4:19 ` Richard Stallman
2020-10-17 4:19 ` Richard Stallman
2020-10-16 13:57 ` Ergus
2020-10-16 15:31 ` Eli Zaretskii
2020-10-16 19:11 ` Jean Louis
2020-10-16 16:09 ` Alfred M. Szmidt
2020-10-16 17:29 ` Jean Louis
2020-10-16 19:11 ` Thibaut Verron
2020-10-16 19:54 ` Jean Louis
2020-10-16 20:20 ` Thibaut Verron
2020-10-17 4:22 ` Richard Stallman
2020-10-17 4:31 ` Qiantan Hong
2020-10-19 10:12 ` Robert Pluim
2020-10-19 16:15 ` Qiantan Hong
2020-10-20 13:45 ` Dmitry Gutov
2020-10-16 18:57 ` Jean Louis
2020-10-16 17:08 ` Jean Louis
2020-10-16 17:04 ` Jean Louis
2020-10-16 17:39 ` Vasilij Schneidermann
2020-10-18 4:09 ` Richard Stallman
2020-10-16 16:33 ` MELPA issues - " Jean Louis
2020-10-16 18:09 ` Dmitry Gutov
2020-10-16 22:00 ` Qiantan Hong
2020-10-16 22:08 ` Dmitry Gutov
2020-10-17 4:18 ` Richard Stallman
2020-10-17 4:59 ` chad
2020-10-17 5:05 ` Qiantan Hong
2020-10-17 5:06 ` Thibaut Verron
2020-10-17 2:59 ` Marcel Ventosa
2020-10-18 4:12 ` Richard Stallman
2020-10-18 5:16 ` Jean Louis
2020-10-18 4:10 ` Richard Stallman
2020-10-18 7:51 ` Marcel Ventosa
2020-10-18 9:29 ` Dmitry Gutov
2020-10-18 9:36 ` Jean Louis
2020-10-18 8:57 ` Thibaut Verron
2020-10-19 3:44 ` Richard Stallman
2020-10-18 15:57 ` Philip K.
2020-10-19 3:48 ` Richard Stallman
2020-10-19 11:36 ` Dmitry Gutov
2020-10-19 12:43 ` Proposal to include obligatory PGP verification of packages from any repository Jean Louis
2020-10-19 15:55 ` Stefan Kangas
2020-10-19 16:38 ` Jean Louis
2020-10-19 17:30 ` Stefan Monnier
2020-10-19 17:47 ` Jean Louis
2020-10-19 18:02 ` Stefan Monnier
2020-10-19 19:04 ` Jean Louis
2020-10-19 20:17 ` Stefan Monnier
2020-10-19 21:02 ` Jean Louis
[not found] ` <jwvft69evmy.fsf-monnier+emacs@gnu.org>
2020-10-20 7:40 ` Jean Louis
2020-10-22 21:25 ` Stefan Monnier
2020-10-23 9:17 ` Jean Louis
2020-10-23 14:52 ` Stefan Monnier
2020-10-23 16:59 ` Jean Louis
2020-10-23 18:25 ` Stefan Monnier
2020-10-24 6:26 ` Jean Louis
2020-10-24 15:29 ` Stefan Monnier
2020-10-19 18:53 ` Stefan Kangas
2020-10-19 18:57 ` Vasilij Schneidermann
2020-10-19 19:20 ` Stefan Monnier
2020-10-19 18:28 ` Vasilij Schneidermann
2020-10-19 19:00 ` ELPA security (was: Proposal to include obligatory PGP verification of packages from any repository) Stefan Monnier
2020-10-19 19:50 ` Proposal to include obligatory PGP verification of packages from any repository Jean Louis
2020-10-20 5:17 ` Richard Stallman
2020-10-20 5:52 ` Stefan Monnier
2020-10-21 4:46 ` Richard Stallman
2020-10-20 16:17 ` Vasilij Schneidermann
2020-10-19 15:46 ` Proposal for an Emacs User Survey Drew Adams
2020-10-19 16:42 ` Jean Louis
2020-10-20 5:19 ` Richard Stallman
2020-10-19 16:42 ` Thibaut Verron
2020-10-19 16:53 ` Drew Adams
2020-10-20 5:14 ` Richard Stallman
2020-10-20 10:47 ` Dmitry Gutov
2020-10-16 7:05 ` Thibaut Verron
2020-10-16 13:23 ` Philip K.
2020-10-16 18:46 ` Jean Louis
2020-10-17 4:22 ` Richard Stallman
2020-10-15 3:52 ` Richard Stallman
2020-10-15 5:57 ` Thibaut Verron
2020-10-12 5:36 ` Jean Louis
2020-10-12 5:52 ` Thibaut Verron
2020-10-12 2:04 ` Richard Stallman
2020-10-12 2:04 ` Richard Stallman
2020-10-12 15:16 ` Adrien Brochard
2020-10-12 16:55 ` Jean Louis
2020-10-12 17:15 ` Drew Adams
2020-10-13 3:49 ` Richard Stallman
2020-10-11 20:54 ` Bonface M. K.
2020-10-16 13:30 ` Philip K.
2020-10-19 16:20 ` Philip K.
2020-10-19 19:44 ` Dmitry Gutov
2020-10-20 5:19 ` Richard Stallman
2020-10-20 8:22 ` Thibaut Verron
2020-10-20 9:48 ` Jean Louis
2020-10-20 11:03 ` Thibaut Verron
2020-10-20 11:38 ` Jean Louis
2020-10-26 17:43 ` Teemu Likonen
2020-10-26 19:36 ` Jean Louis
2020-10-26 19:58 ` Jean Louis
2020-10-27 3:44 ` Richard Stallman
2020-10-26 18:13 ` Ivan Yonchovski
2020-10-26 20:21 ` Jean Louis
[not found] <<fdimdgyaxf.fsf@norden.tntech.edu>
[not found] ` <<83r1s4ftc7.fsf@gnu.org>
2020-08-18 16:13 ` Delete variables obsolete since Emacs 23 Drew Adams
2020-08-18 19:27 ` Stefan Monnier
2020-08-18 20:21 ` Drew Adams
2020-08-18 21:00 ` Gregory Heytings via Emacs development discussions.
2020-08-18 21:55 ` Stefan Monnier
2020-08-18 21:30 ` Jeff Norden
2020-07-30 4:01 bug#42611: 26.3; edit-abbrevs lets me type and commit, but doesn't store anywhere and abbrevs don't work Brett Randall
[not found] ` <handler.42611.B.159608273314264.ack@debbugs.gnu.org>
[not found] ` <(Brett>
2020-10-17 8:41 ` Lars Ingebrigtsen
2020-10-27 10:36 ` brett.randall
[not found] ` <(brett>
[not found] ` <randall's>
[not found] ` <"Tue,>
2020-10-27 10:43 ` Lars Ingebrigtsen
2020-10-27 10:49 ` Brett Randall
2020-10-27 11:08 ` Lars Ingebrigtsen
[not found] ` <(Lars>
[not found] ` <Ingebrigtsen's>
[not found] ` <12:08:50>
2020-10-27 11:19 ` bug#42611: (no subject) Lars Ingebrigtsen
[not found] ` <877drbhq6c.fsf@gnus.org>
[not found] ` <handler.42611.C.160379757411378.notifdonectrl.0@debbugs.gnu.org>
2020-10-27 22:22 ` bug#42611: 26.3; edit-abbrevs lets me type and commit, but doesn't store anywhere and abbrevs don't work Brett Randall
2020-05-21 16:56 bug#41438: [PATCH] Allow windmove keys to be bound without prefix or modifiers Philip K.
2020-05-21 22:18 ` Juri Linkov
2020-05-22 18:26 ` Philip K.
2020-05-22 19:15 ` Drew Adams
2020-05-23 22:12 ` Juri Linkov
2020-05-22 18:26 ` Philip K.
2020-06-26 19:46 ` Philip K.
2020-06-27 23:53 ` Juri Linkov
2020-06-28 8:30 ` Philip K.
2020-06-28 23:37 ` Juri Linkov
2020-08-05 18:05 ` Lars Ingebrigtsen
2020-08-05 23:40 ` Juri Linkov
2020-08-06 9:28 ` Philip K.
2020-08-06 23:43 ` Juri Linkov
2020-08-07 10:53 ` Philip K.
2020-08-08 23:54 ` Juri Linkov
2021-05-12 20:38 ` Lars Ingebrigtsen
2021-05-12 21:27 ` Philip Kaludercic
2021-05-22 20:29 ` Philip Kaludercic
2021-05-22 21:09 ` Philip Kaludercic
2021-05-23 6:49 ` Eli Zaretskii
2021-05-23 12:36 ` Philip Kaludercic
2021-05-25 5:12 ` Lars Ingebrigtsen
2021-05-25 7:25 ` Philip Kaludercic
2021-05-25 9:53 ` Philip Kaludercic
2021-05-25 11:16 ` Arthur Miller
2021-05-25 11:42 ` Philip Kaludercic
2021-05-25 13:31 ` Arthur Miller
2021-05-25 14:39 ` Philip Kaludercic
2021-05-25 11:36 ` Arthur Miller
2021-05-25 11:46 ` Philip Kaludercic
2021-05-25 13:58 ` Arthur Miller
2021-05-25 19:13 ` Lars Ingebrigtsen
2021-05-25 19:16 ` Lars Ingebrigtsen
2021-05-25 19:25 ` Philip Kaludercic
2021-05-25 20:18 ` Juri Linkov
2021-05-25 21:45 ` Philip Kaludercic
2021-05-26 21:35 ` Juri Linkov
2021-05-27 11:09 ` Philip Kaludercic
2021-05-30 22:11 ` Juri Linkov
2021-05-31 8:50 ` Philip Kaludercic
2021-05-31 20:15 ` Juri Linkov
2021-05-31 21:27 ` Philip Kaludercic
2021-06-03 20:36 ` Juri Linkov
[not found] <20200515175844.18941.61355@vcs0.savannah.gnu.org>
[not found] ` <20200515175845.997EC20999@vcs0.savannah.gnu.org>
2020-05-15 18:38 ` Deleting old `:version` from defcustoms (was: master b76cdd0: Delete libraries obsolete since 23.1 and 23.2) Stefan Monnier
2020-05-15 20:58 ` Stefan Kangas
2020-08-07 15:42 ` [PATCH] Remove obsolete fast-lock and lazy-lock libraries (was: Re: Deleting old `:version` from defcustoms) Stefan Kangas
2020-08-08 2:19 ` [PATCH] Remove obsolete fast-lock and lazy-lock libraries Stefan Monnier
2020-05-16 13:18 ` Delete variables obsolete since Emacs 23 Stefan Kangas
2020-05-16 15:49 ` Paul Eggert
2020-05-17 2:52 ` Stefan Monnier
2020-05-17 11:39 ` Dmitry Gutov
2020-08-08 0:28 ` Stefan Kangas
2020-08-14 11:11 ` Stefan Kangas
2020-08-14 15:42 ` Stefan Kangas
2020-08-14 18:56 ` Drew Adams
2020-08-14 19:00 ` Lars Ingebrigtsen
2020-08-14 19:14 ` Drew Adams
2020-08-14 19:55 ` Ulrich Mueller
2020-08-14 23:37 ` Stefan Kangas
2020-08-15 1:28 ` Drew Adams
2020-08-15 12:51 ` Stefan Monnier
2020-08-15 19:54 ` Drew Adams
2020-08-16 4:13 ` Richard Stallman
2020-08-16 5:30 ` Drew Adams
2020-08-16 13:46 ` Stefan Monnier
2020-08-17 3:23 ` Richard Stallman
2020-08-17 14:20 ` Drew Adams
2020-08-17 14:45 ` Gregory Heytings via Emacs development discussions.
2020-08-18 1:55 ` Jeff Norden
2020-08-18 4:53 ` Eli Zaretskii
2020-08-19 8:31 ` Gregory Heytings via Emacs development discussions.
2020-08-19 13:26 ` Drew Adams
2020-08-19 13:39 ` Stefan Monnier
2020-08-19 13:54 ` Gregory Heytings via Emacs development discussions.
2020-08-19 15:15 ` Eli Zaretskii
2020-08-20 0:33 ` Jeff Norden
2020-08-19 14:36 ` Eli Zaretskii
2020-08-18 16:14 ` Drew Adams
2020-08-18 4:06 ` Richard Stallman
2020-08-18 16:13 ` Drew Adams
2020-08-18 11:17 ` Lars Ingebrigtsen
2020-08-24 2:28 ` Stefan Kangas
2020-08-25 3:46 ` Richard Stallman
2020-08-25 4:06 ` Drew Adams
2020-08-26 1:57 ` Richard Stallman
2020-08-26 8:59 ` Gregory Heytings via Emacs development discussions.
2020-08-26 13:22 ` Stefan Kangas
2020-08-27 2:51 ` Richard Stallman
2020-08-27 3:51 ` Stefan Kangas
2020-08-26 17:39 ` Drew Adams
2020-08-26 18:16 ` Stefan Monnier
2020-09-04 17:04 ` Stefan Kangas
2020-09-05 12:39 ` Lars Ingebrigtsen
2020-09-11 20:01 ` Stefan Kangas
2020-05-17 3:18 ` Deleting old `:version` from defcustoms (was: master b76cdd0: Delete libraries obsolete since 23.1 and 23.2) Stefan Kangas
2020-05-17 15:18 ` Eli Zaretskii
2020-05-17 16:59 ` Deleting old `:version` from defcustoms Stefan Monnier
2019-04-21 19:30 bug#35367: 26.2; `dired-copy-how-to-fn' and HOW-TO arg of `dired-create-files' Drew Adams
2019-07-09 14:21 ` Lars Ingebrigtsen
2019-07-11 5:51 ` Mike Kupfer
2019-07-11 14:04 ` Lars Ingebrigtsen
2019-07-11 14:18 ` Drew Adams
2019-07-12 3:20 ` Mike Kupfer
2019-07-12 3:33 ` Drew Adams
2022-01-22 14:43 ` Lars Ingebrigtsen
[not found] <mailman.5042.1543777897.1284.help-gnu-emacs@gnu.org>
2018-12-04 9:04 ` using setq to create lists based on other lists Barry Margolin
2018-12-04 13:56 ` Stefan Monnier
2018-12-05 1:07 ` Robert Thorpe
2018-12-05 2:32 ` Drew Adams
2018-12-05 6:45 ` Jean-Christophe Helary
2018-12-05 8:00 ` Marcin Borkowski
2018-12-05 8:11 ` Jean-Christophe Helary
2018-12-05 14:57 ` Drew Adams
[not found] ` <mailman.5218.1544021892.1284.help-gnu-emacs@gnu.org>
2018-12-05 16:59 ` Barry Margolin
[not found] ` <mailman.5186.1543978155.1284.help-gnu-emacs@gnu.org>
2018-12-05 16:50 ` Barry Margolin
[not found] ` <mailman.5145.1543931778.1284.help-gnu-emacs@gnu.org>
2018-12-05 16:47 ` Barry Margolin
[not found] <mailman.7307.1515801433.27995.help-gnu-emacs@gnu.org>
2018-01-13 0:43 ` info-find-source Emanuel Berg
2018-01-13 3:43 ` info-find-source Robert Thorpe
2018-01-13 5:23 ` info-find-source Marcin Borkowski
2018-01-13 16:31 ` info-find-source Drew Adams
2018-01-14 7:03 ` info-find-source Marcin Borkowski
2018-01-16 23:10 ` info-find-source Drew Adams
2018-01-13 15:50 ` info-find-source Drew Adams
[not found] ` <mailman.7314.1515821013.27995.help-gnu-emacs@gnu.org>
2018-01-14 2:57 ` info-find-source Emanuel Berg
2018-01-14 7:00 ` info-find-source Marcin Borkowski
[not found] ` <mailman.7369.1515913231.27995.help-gnu-emacs@gnu.org>
2018-01-15 4:17 ` info-find-source Emanuel Berg
2018-01-15 18:54 ` info-find-source Marcin Borkowski
[not found] ` <mailman.7435.1516042498.27995.help-gnu-emacs@gnu.org>
2018-01-15 19:55 ` info-find-source Emanuel Berg
2018-01-16 23:58 ` info-find-source Robert Thorpe
2018-01-19 6:22 ` info-find-source Marcin Borkowski
[not found] ` <mailman.7609.1516342943.27995.help-gnu-emacs@gnu.org>
2018-01-19 7:12 ` info-find-source Emanuel Berg
2018-01-19 20:31 ` info-find-source Marcin Borkowski
2018-01-19 21:05 ` info-find-source Drew Adams
[not found] ` <mailman.7653.1516395915.27995.help-gnu-emacs@gnu.org>
2018-01-19 22:19 ` info-find-source Emanuel Berg
2018-01-19 23:21 ` info-find-source Drew Adams
[not found] ` <mailman.7656.1516404112.27995.help-gnu-emacs@gnu.org>
2018-01-20 19:49 ` info-find-source Emanuel Berg
2018-01-20 20:18 ` info-find-source Eli Zaretskii
[not found] ` <<83bmhos2qd.fsf@gnu.org>
2018-01-20 23:50 ` info-find-source Drew Adams
2018-01-21 0:04 ` info-find-source Drew Adams
[not found] ` <mailman.7695.1516493072.27995.help-gnu-emacs@gnu.org>
2018-01-21 11:49 ` info-find-source Emanuel Berg
[not found] ` <mailman.7650.1516393881.27995.help-gnu-emacs@gnu.org>
2018-01-19 20:43 ` info-find-source Emanuel Berg
2018-01-13 5:17 ` info-find-source Marcin Borkowski
[not found] ` <mailman.7313.1515820700.27995.help-gnu-emacs@gnu.org>
2018-01-14 2:54 ` info-find-source Emanuel Berg
2018-01-15 18:52 ` info-find-source Marcin Borkowski
[not found] ` <mailman.7433.1516042345.27995.help-gnu-emacs@gnu.org>
2018-01-15 19:50 ` info-find-source Emanuel Berg
2017-11-11 9:17 Reload file from disk Florian Weimer
2017-11-11 10:29 ` Eli Zaretskii
2017-11-11 10:40 ` Eli Zaretskii
2017-11-11 10:54 ` Florian Weimer
2017-11-11 11:55 ` Eli Zaretskii
2017-11-11 13:45 ` Ken Olum
2017-11-11 14:11 ` Eli Zaretskii
2017-11-11 15:03 ` Ken Olum
2017-11-11 16:48 ` Drew Adams
2017-11-11 11:59 ` Andreas Schwab
2017-11-11 12:44 ` Noam Postavsky
2017-11-12 18:28 ` Joost Kremers
2017-11-13 17:24 ` Tom Tromey
2016-08-03 9:30 How to get back to a place in a buffer, or: what is a window configuration? Marcin Borkowski
2016-08-03 11:25 ` Kaushal Modi
2016-08-03 18:31 ` Marcin Borkowski
2016-08-03 14:42 ` Drew Adams
2016-08-03 18:42 ` Marcin Borkowski
2016-08-03 19:39 ` Drew Adams
2016-08-03 21:47 ` Robert Thorpe
2016-08-03 22:06 ` Drew Adams
2016-05-13 14:20 Overriding emacs key bindings xiongtk
2016-05-16 18:04 ` Eli Zaretskii
2016-05-16 21:15 ` xiongtk
2016-05-16 18:59 ` Emanuel Berg
2016-05-16 21:14 ` xiongtk
2016-05-16 23:29 ` Emanuel Berg
2016-05-17 1:55 ` Robert Thorpe
2016-05-17 2:41 ` Emanuel Berg
2016-05-17 4:07 ` Drew Adams
2016-05-17 3:25 ` Kaushal Modi
2016-05-17 4:07 ` Drew Adams
2016-05-17 4:15 ` Emanuel Berg
2016-05-17 20:38 ` Robert Thorpe
2016-05-17 4:07 ` Drew Adams
2016-05-18 1:42 ` Emacs conventions (was: Re: Overriding emacs key bindings) Emanuel Berg
2016-05-18 4:38 ` Drew Adams
2016-05-18 5:22 ` Emanuel Berg
2016-05-18 5:36 ` "First line is not a complete sentence" (was: Re: Emacs conventions (was: Re: Overriding emacs key bindings)) Emanuel Berg
[not found] ` <mailman.40.1463549841.6543.help-gnu-emacs@gnu.org>
2016-05-18 13:27 ` Joost Kremers
2016-05-19 4:32 ` Emanuel Berg
[not found] ` <mailman.37.1463546355.6543.help-gnu-emacs@gnu.org>
2016-05-18 14:31 ` Emacs conventions (was: Re: Overriding emacs key bindings) Barry Margolin
2016-05-19 4:38 ` Emanuel Berg
2016-05-17 4:44 ` Overriding emacs key bindings Marcin Borkowski
2016-05-17 20:37 ` Robert Thorpe
2016-05-18 2:21 ` Emanuel Berg
2016-05-18 20:34 ` Robert Thorpe
2016-05-19 1:33 ` Emanuel Berg
2016-05-18 17:52 ` Marcin Borkowski
2016-05-18 20:30 ` Robert Thorpe
2016-05-17 4:43 ` Marcin Borkowski
2016-05-18 1:51 ` Emanuel Berg
2016-05-17 4:49 ` Marcin Borkowski
2016-05-18 2:02 ` Emanuel Berg
2015-03-03 0:47 Opening a bookmark in the init file Robert Thorpe
2015-03-03 0:56 ` Drew Adams
2015-03-03 2:32 ` Robert Thorpe
2015-03-08 19:18 ` Robert Thorpe
2015-03-08 21:24 ` Drew Adams
2015-03-08 21:48 ` Robert Thorpe
2015-03-08 22:52 ` Drew Adams
2015-01-14 22:12 Info: how to get back from a footnote Marcin Borkowski
2015-01-15 2:42 ` Robert Thorpe
2015-01-15 3:11 ` Drew Adams
2015-01-15 5:51 ` Marcin Borkowski
2015-01-16 2:38 ` Robert Thorpe
[not found] <mailman.16504.1419019164.1147.help-gnu-emacs@gnu.org>
2014-12-29 4:21 ` Abbrevs for the most frequent elisp symbols Emanuel Berg
2014-12-29 11:24 ` Marcin Borkowski
2014-12-29 13:09 ` Robert Thorpe
2014-12-29 15:28 ` Drew Adams
2014-12-29 16:28 ` Robert Thorpe
2014-12-29 13:26 ` Stefan Monnier
2014-12-29 13:40 ` Marcin Borkowski
2014-12-29 14:57 ` Stefan Monnier
2014-12-29 15:49 ` Tom
[not found] ` <mailman.16844.1419852282.1147.help-gnu-emacs@gnu.org>
2015-01-03 2:25 ` Emanuel Berg
2015-01-04 0:19 ` Artur Malabarba
[not found] ` <mailman.17204.1420330787.1147.help-gnu-emacs@gnu.org>
2015-01-05 21:16 ` Emanuel Berg
2015-01-08 20:53 ` Artur Malabarba
2015-01-03 2:31 ` Emanuel Berg
2014-11-24 16:40 When do you prefer frames instead of windows? Raffaele Ricciardi
2014-11-24 17:20 ` Drew Adams
2014-11-25 8:03 ` Gian Uberto Lauri
2014-11-25 15:46 ` Drew Adams
2014-11-25 15:54 ` Gian Uberto Lauri
2014-11-25 8:33 ` When do you prefer windows instead of frames? Was: " H. Dieter Wilhelm
2014-11-25 15:46 ` Drew Adams
2014-11-25 18:40 ` MBR
2014-11-25 18:52 ` Drew Adams
2014-11-26 2:31 ` Yuri Khan
2014-12-19 16:08 ` Jude DaShiell
2014-11-25 8:52 ` Rainer M Krug
2014-11-24 19:10 ` MBR
2014-11-24 19:14 ` Drew Adams
2014-11-24 22:12 ` H. Dieter Wilhelm
[not found] ` <mailman.14497.1416867184.1147.help-gnu-emacs@gnu.org>
2014-11-25 0:59 ` Barry Margolin
2014-11-25 1:29 ` Robert Thorpe
2014-11-25 4:21 ` Drew Adams
2014-11-25 8:54 ` Rainer M Krug
2014-11-25 15:47 ` Drew Adams
2014-11-25 1:45 ` Yuri Khan
2014-11-25 9:27 ` Ralf Fassel
2014-11-25 15:47 ` Drew Adams
[not found] ` <mailman.14554.1416930453.1147.help-gnu-emacs@gnu.org>
2014-11-25 15:57 ` Ralf Fassel
2014-11-25 16:57 ` Drew Adams
[not found] ` <mailman.14564.1416934703.1147.help-gnu-emacs@gnu.org>
2014-11-25 17:16 ` Ralf Fassel
2014-11-25 18:09 ` Drew Adams
2014-11-25 22:08 ` Subhan Michael Tindall
2014-11-25 22:22 ` Drew Adams
[not found] ` <mailman.14600.1416953316.1147.help-gnu-emacs@gnu.org>
2014-11-26 9:34 ` Joost Kremers
2014-11-25 22:02 ` Subhan Michael Tindall
2014-11-26 5:02 ` Yuri Khan
[not found] ` <mailman.14479.1416849631.1147.help-gnu-emacs@gnu.org>
2014-11-24 17:47 ` Barry Margolin
2014-11-24 18:06 ` Jai Dayal
2014-11-25 17:32 ` Joost Kremers
[not found] ` <<slrnm79f8k.a37.joost.m.kremers@j.kremers4.news.arnhem.chello.nl>
2014-11-25 18:09 ` Drew Adams
2014-11-25 22:28 ` Bob Proulx
2014-11-25 22:54 ` Drew Adams
2014-11-26 8:12 ` Alan Schmitt
2014-11-26 13:42 ` H. Dieter Wilhelm
2014-11-28 13:51 ` Tom Davey
2014-11-28 15:39 ` Drew Adams
2014-11-26 16:37 ` Ken Goldman
2014-11-27 21:02 ` Chris F.A. Johnson
2014-07-23 21:37 when you gotta have a variable value for a symbol name Buchs, Kevin J.
2014-07-23 22:02 ` Drew Adams
[not found] ` <(message>
[not found] ` <from>
[not found] ` <Richard>
[not found] ` <Barry>
[not found] ` <Emanuel>
[not found] ` <Drew>
[not found] ` <Adams>
[not found] ` <on>
[not found] ` <Fri>
[not found] ` <Thu>
[not found] ` <01>
[not found] ` <Sun>
[not found] ` <Wed>
[not found] ` <14>
[not found] ` <Jan>
[not found] ` <2018>
[not found] ` <21:17:16>
[not found] ` <2015>
[not found] ` <02:32:50>
[not found] ` <23>
[not found] ` <Jul>
[not found] ` <2019>
[not found] ` <07:18:26>
[not found] ` <16:21:24>
[not found] ` <2014>
[not found] ` <15:02:38>
[not found] ` <-0700>
[not found] ` <17:40:42>
[not found] ` <Sat>
[not found] ` <Mon>
[not found] ` <29>
[not found] ` <24>
[not found] ` <Nov>
[not found] ` <2017>
[not found] ` <Tue>
[not found] ` <03>
[not found] ` <17>
[not found] ` <May>
[not found] ` <2016>
[not found] ` <01:29:37>
[not found] ` <2020>
[not found] ` <23:56:00>
[not found] ` <01:18:18>
[not found] ` <04:01:05>
[not found] ` <17:07:29>
[not found] ` <-0800>
[not found] ` <Marcin>
[not found] ` <Robert>
[not found] ` <Juri>
[not found] ` <Raffaele>
[not found] ` <Eli>
2014-07-24 21:57 ` Robert Thorpe
2014-07-25 0:06 ` Drew Adams
[not found] ` <mailman.5936.1406152985.1147.help-gnu-emacs@gnu.org>
2014-07-23 22:12 ` Pascal J. Bourguignon
[not found] <Your>
[not found] ` <message>
[not found] ` <of>
[not found] ` <"Thu,>
[not found] ` <"Tue>
[not found] ` <09>
[not found] ` <Oct>
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CADB4rJEksAJ9dQO9ZKtzdfbC7F231Gyrkq24xT13h9FUHONYrw@mail.gmail.com \
--to=radon.neon@gmail.com \
--cc=eliz@gnu.org \
--cc=emacs-devel@gnu.org \
--cc=rms@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.