=== modified file 'INSTALL'
--- INSTALL	2013-07-29 11:35:16 +0000
+++ INSTALL	2013-07-31 09:03:44 +0000
@@ -134,23 +134,15 @@
 Note that Emacs cannot support complex scripts on a TTY, unless the
 terminal includes such a support.
 
-* intlfonts-VERSION.tar.gz
-
-The intlfonts distribution contains X11 fonts in various encodings
-that Emacs can use to display international characters.  If you see a
-non-ASCII character appear as a hollow box, that means you don't have
-a font for it.  You might find one in the intlfonts distribution.  If
-you do have a font for a non-ASCII character, but some characters
-don't look right, or appear improperly aligned, a font from the
-intlfonts distribution might look better.
-
-The fonts in the intlfonts distribution are also used by the ps-print
-package for printing international characters.  The file
-lisp/ps-mule.el defines the *.bdf font files required for printing
-each character set.
-
-The intlfonts distribution contains its own installation instructions,
-in the intlfonts/README file.
+* GNU FreeFont
+
+The GNU FreeFont distribution is a free family of scalable outline
+fonts, suitable for general use on computers and for desktop
+publishing.  It is Unicode-encoded for compatibility with all modern
+operating systems.  If you see a non-ASCII character appear as a
+hollow box, that means you don't have a font for it.
+
+The fonts are ready to use, avalable in TrueType and OpenType formats.
 
 * Image support libraries
 

=== modified file 'doc/misc/faq.texi'
--- doc/misc/faq.texi	2013-07-25 07:10:56 +0000
+++ doc/misc/faq.texi	2013-07-31 09:03:44 +0000
@@ -4018,7 +4018,6 @@
 * Emacs does not display 8-bit characters::
 * Inputting eight-bit characters::
 * Right-to-left alphabets::
-* How to add fonts::
 @end menu
 
 @node Emacs does not display 8-bit characters
@@ -4060,126 +4059,6 @@
 Arabic, Farsi, and Hebrew, since version 24.1.
 @xref{New in Emacs 24, bidirectional display}.
 
-
-@node How to add fonts
-@section How do I add fonts for use with Emacs?
-@cindex add fonts for use with Emacs
-@cindex intlfonts
-
-First, download and install the BDF font files and any auxiliary
-packages they need.  The GNU Intlfonts distribution can be found on
-@uref{http://directory.fsf.org/localization/intlfonts.html, the GNU
-Software Directory Web site}.
-
-Next, if you are on X Window system, issue the following two commands
-from the shell's prompt:
-
-@example
-  xset +fp /usr/local/share/emacs/fonts
-  xset fp rehash
-@end example
-
-@noindent
-(Modify the first command if you installed the fonts in a directory
-that is not @file{/usr/local/share/emacs/fonts}.)  You also need to
-arrange for these two commands to run whenever you log in, e.g., by
-adding them to your window-system startup file, such as
-@file{~/.xsessionrc} or @file{~/.gnomerc}.
-
-Now, add the following line to your @file{~/.emacs} init file:
-
-@lisp
-  (add-to-list 'bdf-directory-list "/usr/share/emacs/fonts/bdf")
-@end lisp
-
-@noindent
-(Again, modify the file name if you installed the fonts elsewhere.)
-
-Finally, if you wish to use the installed fonts with @code{ps-print},
-add the following line to your @file{~/.emacs}:
-
-@lisp
-  (setq ps-multibyte-buffer 'bdf-font-except-latin)
-@end lisp
-
-A few additional steps are necessary for MS-Windows; they are listed
-below.
-
-First, make sure @emph{all} the directories with BDF font files are
-mentioned in @code{bdf-directory-list}.  On Unix and GNU/Linux
-systems, one normally runs @kbd{make install} to install the BDF fonts
-in the same directory.  By contrast, Windows users typically don't run
-the Intlfonts installation command, but unpack the distribution in
-some directory, which leaves the BDF fonts in its subdirectories.  For
-example, assume that you unpacked Intlfonts in @file{C:/Intlfonts};
-then you should set @code{bdf-directory-list} as follows:
-
-@lisp
-  (setq bdf-directory-list
-    '("C:/Intlfonts/Asian"
-      "C:/Intlfonts/Chinese" "C:/Intlfonts/Chinese.X"
-      "C:/Intlfonts/Chinese.BIG" "C:/Intlfonts/Ethiopic"
-      "C:/Intlfonts/European" "C:/Intlfonts/European.BIG"
-      "C:/Intlfonts/Japanese" "C:/Intlfonts/Japanese.X"
-      "C:/Intlfonts/Japanese.BIG" "C:/Intlfonts/Korean.X"
-      "C:/Intlfonts/Misc"))
-@end lisp
-
-@cindex @code{w32-bdf-filename-alist}
-@cindex @code{w32-find-bdf-fonts}
-Next, you need to set up the variable @code{w32-bdf-filename-alist} to
-an alist of the BDF fonts and their corresponding file names.
-Assuming you have set @code{bdf-directory-list} to name all the
-directories with the BDF font files, the following Lisp snippet will
-set up @code{w32-bdf-filename-alist}:
-
-@lisp
-  (setq w32-bdf-filename-alist
-     (w32-find-bdf-fonts bdf-directory-list))
-@end lisp
-
-Now, create fontsets for the BDF fonts:
-
-@smallexample
-  (create-fontset-from-fontset-spec
-   "-*-fixed-medium-r-normal-*-16-*-*-*-c-*-fontset-bdf,
-   japanese-jisx0208:-*-*-medium-r-normal-*-16-*-*-*-c-*-jisx0208.1983-*,
-   katakana-jisx0201:-*-*-medium-r-normal-*-16-*-*-*-c-*-jisx0201*-*,
-   latin-jisx0201:-*-*-medium-r-normal-*-16-*-*-*-c-*-jisx0201*-*,
-   japanese-jisx0208-1978:-*-*-medium-r-normal-*-16-*-*-*-c-*-jisx0208.1978-*,
-   thai-tis620:-misc-fixed-medium-r-normal--16-160-72-72-m-80-tis620.2529-1,
-   lao:-misc-fixed-medium-r-normal--16-160-72-72-m-80-MuleLao-1,
-   tibetan-1-column:-TibMdXA-fixed-medium-r-normal--16-160-72-72-m-80-MuleTibetan-1,
-   ethiopic:-Admas-Ethiomx16f-Medium-R-Normal--16-150-100-100-M-160-Ethiopic-Unicode,
-   tibetan:-TibMdXA-fixed-medium-r-normal--16-160-72-72-m-160-MuleTibetan-0")
-@end smallexample
-
-Many of the international bdf fonts from Intlfonts are type 0, and
-therefore need to be added to font-encoding-alist:
-
-@lisp
-  (setq font-encoding-alist
-        (append '(("MuleTibetan-0" (tibetan . 0))
-                  ("GB2312"        (chinese-gb2312 . 0))
-                  ("JISX0208"      (japanese-jisx0208 . 0))
-                  ("JISX0212"      (japanese-jisx0212 . 0))
-                  ("VISCII"        (vietnamese-viscii-lower . 0))
-                  ("KSC5601"       (korean-ksc5601 . 0))
-                  ("MuleArabic-0"  (arabic-digit . 0))
-                  ("MuleArabic-1"  (arabic-1-column . 0))
-                  ("MuleArabic-2"  (arabic-2-column . 0)))
-                font-encoding-alist))
-@end lisp
-
-You can now use the Emacs font menu to select the @samp{bdf: 16-dot medium}
-fontset, or you can select it by setting the default font in your
-@file{~/.emacs}:
-
-@lisp
-  (set-default-font "fontset-bdf")
-@end lisp
-
-
 @c ------------------------------------------------------------
 @node Mail and news
 @chapter Mail and news
