* bug#14087: [PATCH] Some fixes for refcard.tex
@ 2013-03-29 9:02 Xue Fuqiao
2013-05-08 17:18 ` Glenn Morris
2013-05-25 2:18 ` Xue Fuqiao
0 siblings, 2 replies; 6+ messages in thread
From: Xue Fuqiao @ 2013-03-29 9:02 UTC (permalink / raw)
To: 14087
The following patch refines some entries in etc/refcards/refcard.tex:
diff -cp trunk/etc/refcards/refcard.tex.orig trunk/etc/refcards/refcard.tex
*** trunk/etc/refcards/refcard.tex.orig 2013-03-10 06:42:26.000000000 +0800
--- trunk/etc/refcards/refcard.tex 2013-03-29 16:54:48.000000000 +0800
*************** If Emacs is still searching, \kbd{C-g} c
*** 355,360 ****
--- 355,361 ----
\key{scroll current line to center, top, bottom}{C-l}
\key{goto line}{M-g g}
+ \key{goto char}{M-g c}
\key{back to indentation}{M-m}
\section{Killing and Deleting}
*************** minibuffer. Type \kbd{F10} to activate
*** 504,509 ****
--- 505,511 ----
\key{check spelling of current word}{M-\$}
\metax{check spelling of all words in region}{M-x ispell-region}
\metax{check spelling of entire buffer}{M-x ispell-buffer}
+ \metax{toggle on-the-fly spell checking}{M-x flyspell-mode}
\section{Tags}
*************** minibuffer. Type \kbd{F10} to activate
*** 512,523 ****
\metax{specify a new tags file}{M-x visit-tags-table}
\metax{regexp search on all files in tags table}{M-x tags-search}
! \metax{run query-replace on all the files}{M-x tags-query-replace}
\key{continue last tags search or query-replace}{M-,}
\section{Shells}
\key{execute a shell command}{M-!}
\key{run a shell command on the region}{M-|}
\key{filter region through a shell command}{C-u M-|}
\key{start a shell in window \kbd{*shell*}}{M-x shell}
--- 514,526 ----
\metax{specify a new tags file}{M-x visit-tags-table}
\metax{regexp search on all files in tags table}{M-x tags-search}
! \metax{run {\bf query-replace-regexp} on all files listed in tags table}{M-x tags-query-replace}
\key{continue last tags search or query-replace}{M-,}
\section{Shells}
\key{execute a shell command}{M-!}
+ \key{execute a shell command asynchronously}{M-&}
\key{run a shell command on the region}{M-|}
\key{filter region through a shell command}{C-u M-|}
\key{start a shell in window \kbd{*shell*}}{M-x shell}
*************** minibuffer. Type \kbd{F10} to activate
*** 554,562 ****
--- 557,568 ----
\key{zero or more repeats}{*}
\key{one or more repeats}{+}
\key{zero or one repeat}{?}
+ \key{quote special characters}{\\}
\key{quote regular expression special character {\it c\/}}{\\{\it c}}
\key{alternative (``or'')}{\\|}
\key{grouping}{\\( {\rm$\ldots$} \\)}
+ \key{shy grouping}{\\(:? {\rm$\ldots$} \\)}
+ \key{explicit numbered grouping}{\\(:NUM {\rm$\ldots$} \\)}
\key{same text as {\it n\/}th group}{\\{\it n}}
\key{at word break}{\\b}
\key{not at word break}{\\B}
*************** minibuffer. Type \kbd{F10} to activate
*** 565,576 ****
--- 571,585 ----
\threecol{{\bf entity}}{{\bf match start}}{{\bf match end}}
\threecol{line}{^}{\$}
\threecol{word}{\\<}{\\>}
+ \threecol{symbol}{\\_<}{\\_>}
\threecol{buffer}{\\`}{\\'}
+ %% FIXME: "`" and "'" isn't displayed correctly in the output PDF file
\threecol{{\bf class of characters}}{{\bf match these}}{{\bf match others}}
\threecol{explicit set}{[ {\rm$\ldots$} ]}{[^ {\rm$\ldots$} ]}
\threecol{word-syntax character}{\\w}{\\W}
\threecol{character with syntax {\it c}}{\\s{\it c}}{\\S{\it c}}
+ \threecol{character with category {\it c}}{\\c{\it c}}{\\C{\it c}}
}
\section{International Character Sets}
*************** Moving within a node:
*** 592,598 ****
\key{scroll forward}{SPC}
\key{scroll reverse}{DEL}
! \key{beginning of node}{. {\rm (dot)}}
Moving between nodes:
--- 601,607 ----
\key{scroll forward}{SPC}
\key{scroll reverse}{DEL}
! \key{beginning of node}{b}
Moving between nodes:
*************** Other:
*** 630,646 ****
\key{{\bf start} defining a keyboard macro}{C-x (}
\key{{\bf end} keyboard macro definition}{C-x )}
\key{{\bf execute} last-defined keyboard macro}{C-x e}
! \key{append to last keyboard macro}{C-u C-x (}
\metax{name last keyboard macro}{M-x name-last-kbd-macro}
\metax{insert Lisp definition in buffer}{M-x insert-kbd-macro}
\section{Commands Dealing with Emacs Lisp}
! \key{eval {\bf sexp} before point}{C-x C-e}
\key{eval current {\bf defun}}{C-M-x}
\metax{eval {\bf region}}{M-x eval-region}
\key{read and eval minibuffer}{M-:}
! \metax{load from standard system directory}{M-x load-library}
\section{Simple Customization}
--- 639,655 ----
\key{{\bf start} defining a keyboard macro}{C-x (}
\key{{\bf end} keyboard macro definition}{C-x )}
\key{{\bf execute} last-defined keyboard macro}{C-x e}
! \key{record subsequent keyboard input, then append to last keyboard macro}{C-u C-x (}
\metax{name last keyboard macro}{M-x name-last-kbd-macro}
\metax{insert Lisp definition in buffer}{M-x insert-kbd-macro}
\section{Commands Dealing with Emacs Lisp}
! \key{eval {\bf sexp} before point}{C-x C-e} % sexp? form? expression? S-expression?
\key{eval current {\bf defun}}{C-M-x}
\metax{eval {\bf region}}{M-x eval-region}
\key{read and eval minibuffer}{M-:}
! \metax{load a Lisp library from {\bf load-path}}{M-x load-library}
\section{Simple Customization}
*************** An example:
*** 669,675 ****
\beginexample%
(defun this-line-to-top-of-window (line)
"Reposition current line to top of window.
! With ARG, put point on line ARG."
(interactive "P")
(recenter (if (null line)
0
--- 678,684 ----
\beginexample%
(defun this-line-to-top-of-window (line)
"Reposition current line to top of window.
! With prefix argument LINE, put point on LINE."
(interactive "P")
(recenter (if (null line)
0
*************** With ARG, put point on line ARG."
*** 677,683 ****
\endexample
The \kbd{interactive} spec says how to read arguments interactively.
! Type \kbd{C-h f interactive} for more details.
\copyrightnotice
--- 686,692 ----
\endexample
The \kbd{interactive} spec says how to read arguments interactively.
! Type \kbd{C-h f interactive RET} for more details.
\copyrightnotice
diff -cp trunk/etc/ChangeLog.orig trunk/etc/ChangeLog
*** trunk/etc/ChangeLog.orig 2013-03-23 18:14:12.000000000 +0800
--- trunk/etc/ChangeLog 2013-03-29 17:00:51.000000000 +0800
***************
*** 1,3 ****
--- 1,7 ----
+ 2013-03-29 Xue Fuqiao <xfq.free@gmail.com>
+
+ * refcards/refcard.tex: Refine some entries.
+
2013-03-21 Eric Ludlam <zappo@gnu.org>
* srecode/ede-autoconf.srt: Change Copyright to FSF.
--
Xue Fuqiao
http://www.gnu.org/software/emacs/
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#14087: [PATCH] Some fixes for refcard.tex
2013-03-29 9:02 bug#14087: [PATCH] Some fixes for refcard.tex Xue Fuqiao
@ 2013-05-08 17:18 ` Glenn Morris
2013-05-09 4:59 ` Xue Fuqiao
2013-05-25 2:18 ` Xue Fuqiao
1 sibling, 1 reply; 6+ messages in thread
From: Glenn Morris @ 2013-05-08 17:18 UTC (permalink / raw)
To: Xue Fuqiao; +Cc: 14087
Xue Fuqiao wrote:
> ! \metax{run {\bf query-replace-regexp} on all files listed in tags table}{M-x tags-query-replace}
Way too long. Looks terrible in generated pdf.
> + \key{execute a shell command asynchronously}{M-&}
Fails to LaTeX. Use '\&'.
> ! \key{record subsequent keyboard input, then append to last keyboard macro}{C-u C-x (}
Too long.
> ! \key{eval {\bf sexp} before point}{C-x C-e} % sexp? form? expression? S-expression?
sexp seems fine for a quick reference card.
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#14087: [PATCH] Some fixes for refcard.tex
2013-05-08 17:18 ` Glenn Morris
@ 2013-05-09 4:59 ` Xue Fuqiao
2013-05-09 6:21 ` Glenn Morris
0 siblings, 1 reply; 6+ messages in thread
From: Xue Fuqiao @ 2013-05-09 4:59 UTC (permalink / raw)
To: Glenn Morris; +Cc: 14087
On Thu, May 9, 2013 at 1:18 AM, Glenn Morris <rgm@gnu.org> wrote:
(Sorry, but I cannot configure my email client to use `X-Debbugs-CC'.)
> Xue Fuqiao wrote:
>
>> ! \metax{run {\bf query-replace-regexp} on all files listed in tags table}{M-x tags-query-replace}
>
> Way too long. Looks terrible in generated pdf.
OK, I'll remove this change.
>> + \key{execute a shell command asynchronously}{M-&}
>
> Fails to LaTeX. Use '\&'.
I'll change it.
>> ! \key{record subsequent keyboard input, then append to last keyboard macro}{C-u C-x (}
>
> Too long.
I'll remove this change.
>> ! \key{eval {\bf sexp} before point}{C-x C-e} % sexp? form? expression? S-expression?
>
> sexp seems fine for a quick reference card.
In (info "(elisp) Intro Eval"):
A Lisp object that is intended for evaluation is called a "form" or
"expression".
[...]
It is sometimes also referred to as an "S-expression" or "sexp",
but we generally do not use this terminology in this manual.
IMO we can use "form" here since it is consistent with the manual and
not too long.
--
Best regards, Xue Fuqiao.
http://www.gnu.org/software/emacs/
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#14087: [PATCH] Some fixes for refcard.tex
2013-05-09 4:59 ` Xue Fuqiao
@ 2013-05-09 6:21 ` Glenn Morris
2013-05-09 8:06 ` Xue Fuqiao
0 siblings, 1 reply; 6+ messages in thread
From: Glenn Morris @ 2013-05-09 6:21 UTC (permalink / raw)
To: Xue Fuqiao; +Cc: 14087
Xue Fuqiao wrote:
> (Sorry, but I cannot configure my email client to use `X-Debbugs-CC'.)
i) That option only affects new reports, not replies to existing
reports, so I don't see the relevance.
ii) I guess your mail client doesn't let you add X- headers.
Well, you can put it in the first line of the body instead.
No, it probably isn't in the documentation.
>>> ! \key{eval {\bf sexp} before point}{C-x C-e} % sexp? form? expression? S-expression?
>>
>> sexp seems fine for a quick reference card.
>
> In (info "(elisp) Intro Eval"):
>
> A Lisp object that is intended for evaluation is called a "form" or
> "expression".
> [...]
> It is sometimes also referred to as an "S-expression" or "sexp",
> but we generally do not use this terminology in this manual.
>
> IMO we can use "form" here since it is consistent with the manual and
> not too long.
A reference card is not a manual.
The command is "eval-last-sexp"; "Evaluate sexp before point".
Using the word "sexp" will therefore be confusing to literally no-one,
and has added mnemonic value wrt the command-name.
There is no need to change it.
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#14087: [PATCH] Some fixes for refcard.tex
2013-05-09 6:21 ` Glenn Morris
@ 2013-05-09 8:06 ` Xue Fuqiao
0 siblings, 0 replies; 6+ messages in thread
From: Xue Fuqiao @ 2013-05-09 8:06 UTC (permalink / raw)
To: Glenn Morris; +Cc: 14087
On Thu, May 9, 2013 at 2:21 PM, Glenn Morris <rgm@gnu.org> wrote:
> Xue Fuqiao wrote:
>
>> (Sorry, but I cannot configure my email client to use `X-Debbugs-CC'.)
>
> i) That option only affects new reports, not replies to existing
> reports, so I don't see the relevance.
>
> ii) I guess your mail client doesn't let you add X- headers.
> Well, you can put it in the first line of the body instead.
> No, it probably isn't in the documentation.
Ah, I see. Thank you.
>>>> ! \key{eval {\bf sexp} before point}{C-x C-e} % sexp? form? expression? S-expression?
>>>
>>> sexp seems fine for a quick reference card.
>>
>> In (info "(elisp) Intro Eval"):
>>
>> A Lisp object that is intended for evaluation is called a "form" or
>> "expression".
>> [...]
>> It is sometimes also referred to as an "S-expression" or "sexp",
>> but we generally do not use this terminology in this manual.
>>
>> IMO we can use "form" here since it is consistent with the manual and
>> not too long.
>
> A reference card is not a manual.
> The command is "eval-last-sexp"; "Evaluate sexp before point".
> Using the word "sexp" will therefore be confusing to literally no-one,
> and has added mnemonic value wrt the command-name.
> There is no need to change it.
OK, you convinced me.
--
Best regards, Xue Fuqiao.
http://www.gnu.org/software/emacs/
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#14087: [PATCH] Some fixes for refcard.tex
2013-03-29 9:02 bug#14087: [PATCH] Some fixes for refcard.tex Xue Fuqiao
2013-05-08 17:18 ` Glenn Morris
@ 2013-05-25 2:18 ` Xue Fuqiao
1 sibling, 0 replies; 6+ messages in thread
From: Xue Fuqiao @ 2013-05-25 2:18 UTC (permalink / raw)
To: 14087-done
Fixed and installed, thanks.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-05-25 2:18 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-03-29 9:02 bug#14087: [PATCH] Some fixes for refcard.tex Xue Fuqiao
2013-05-08 17:18 ` Glenn Morris
2013-05-09 4:59 ` Xue Fuqiao
2013-05-09 6:21 ` Glenn Morris
2013-05-09 8:06 ` Xue Fuqiao
2013-05-25 2:18 ` Xue Fuqiao
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.