* Table formula bug? (TBLFM line populated, but C-c = prompt is empty)
@ 2015-11-23 19:07 John Hendy
2015-11-23 22:24 ` Nicolas Goaziou
0 siblings, 1 reply; 6+ messages in thread
From: John Hendy @ 2015-11-23 19:07 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 1505 bytes --]
I was just creating a table and using a formula, finding that C-c =
did not bring up the formula, but acted like I was inputting one for
the first time. I created a min-config and test file to see if this
was something related to my setup, but it seems I can reproduce.
Org-mode version 8.3.2 (release_8.3.2-338-g522ec9 @
/home/jwhendy/.elisp/org.git/lisp/)
#+begin_src min-config
;; set load paths
;; set load dirs and global config options
(add-to-list 'load-path "~/.elisp/org.git/lisp/")
(add-to-list 'load-path "~/.elisp/org.git/contrib/lisp")
#+end_src
Emacs started with =emacs -Q=, followed by =M-x load-file RET
~/Desktop/min-config RET=
#+begin_src table-test.org
* Headline
| something | something else |
|-----------+----------------|
| 1 | 3 |
| 2 | |
| 3 | |
| 4 | |
#+TBLFM: $2=1+2
#+end_src
I created the contents in row 1 col 2 by entering "=1+2 RET". With
cursor in row 2 col 2, I press C-c = and see the attached (empty
prompt for a column 2 formula). If I type in 1+2 and press return, the
TBLFM line changes to:
#+TBLFM: $2=1+2::$$2=1+2
If I go to row 3 and C-c = again, pressing RET to accept the default
(maybe the formula is "stored" but just not displayed?), it changes to
(and nothing is put in row 3 col 2):
#+TBLFM: $$2=1+2
If I go to row 4 and do this one more time, pressing RET with empty
formula, it leaves an empty TBLFM line under the table.
Any ideas?
Thanks,
John
[-- Attachment #2: 2015-11-23_125815.png --]
[-- Type: image/png, Size: 35325 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Table formula bug? (TBLFM line populated, but C-c = prompt is empty)
2015-11-23 19:07 Table formula bug? (TBLFM line populated, but C-c = prompt is empty) John Hendy
@ 2015-11-23 22:24 ` Nicolas Goaziou
2015-11-23 23:57 ` John Hendy
0 siblings, 1 reply; 6+ messages in thread
From: Nicolas Goaziou @ 2015-11-23 22:24 UTC (permalink / raw)
To: John Hendy; +Cc: emacs-orgmode
Hello,
John Hendy <jw.hendy@gmail.com> writes:
> I was just creating a table and using a formula, finding that C-c =
> did not bring up the formula, but acted like I was inputting one for
> the first time. I created a min-config and test file to see if this
> was something related to my setup, but it seems I can reproduce.
>
> Org-mode version 8.3.2 (release_8.3.2-338-g522ec9 @
> /home/jwhendy/.elisp/org.git/lisp/)
>
> #+begin_src min-config
> ;; set load paths
> ;; set load dirs and global config options
> (add-to-list 'load-path "~/.elisp/org.git/lisp/")
> (add-to-list 'load-path "~/.elisp/org.git/contrib/lisp")
> #+end_src
>
> Emacs started with =emacs -Q=, followed by =M-x load-file RET
> ~/Desktop/min-config RET=
>
> #+begin_src table-test.org
>
> * Headline
>
> | something | something else |
> |-----------+----------------|
> | 1 | 3 |
> | 2 | |
> | 3 | |
> | 4 | |
> #+TBLFM: $2=1+2
>
> #+end_src
>
> I created the contents in row 1 col 2 by entering "=1+2 RET". With
> cursor in row 2 col 2, I press C-c = and see the attached (empty
> prompt for a column 2 formula). If I type in 1+2 and press return, the
> TBLFM line changes to:
>
> #+TBLFM: $2=1+2::$$2=1+2
>
> If I go to row 3 and C-c = again, pressing RET to accept the default
> (maybe the formula is "stored" but just not displayed?), it changes to
> (and nothing is put in row 3 col 2):
>
> #+TBLFM: $$2=1+2
>
> If I go to row 4 and do this one more time, pressing RET with empty
> formula, it leaves an empty TBLFM line under the table.
Fixed. Thank you.
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Table formula bug? (TBLFM line populated, but C-c = prompt is empty)
2015-11-23 22:24 ` Nicolas Goaziou
@ 2015-11-23 23:57 ` John Hendy
2015-11-24 0:18 ` Cook, Malcolm
0 siblings, 1 reply; 6+ messages in thread
From: John Hendy @ 2015-11-23 23:57 UTC (permalink / raw)
To: John Hendy, emacs-orgmode
Confirmed fixed -- thanks!
John
On Mon, Nov 23, 2015 at 4:24 PM, Nicolas Goaziou <mail@nicolasgoaziou.fr> wrote:
> Hello,
>
> John Hendy <jw.hendy@gmail.com> writes:
>
>> I was just creating a table and using a formula, finding that C-c =
>> did not bring up the formula, but acted like I was inputting one for
>> the first time. I created a min-config and test file to see if this
>> was something related to my setup, but it seems I can reproduce.
>>
>> Org-mode version 8.3.2 (release_8.3.2-338-g522ec9 @
>> /home/jwhendy/.elisp/org.git/lisp/)
>>
>> #+begin_src min-config
>> ;; set load paths
>> ;; set load dirs and global config options
>> (add-to-list 'load-path "~/.elisp/org.git/lisp/")
>> (add-to-list 'load-path "~/.elisp/org.git/contrib/lisp")
>> #+end_src
>>
>> Emacs started with =emacs -Q=, followed by =M-x load-file RET
>> ~/Desktop/min-config RET=
>>
>> #+begin_src table-test.org
>>
>> * Headline
>>
>> | something | something else |
>> |-----------+----------------|
>> | 1 | 3 |
>> | 2 | |
>> | 3 | |
>> | 4 | |
>> #+TBLFM: $2=1+2
>>
>> #+end_src
>>
>> I created the contents in row 1 col 2 by entering "=1+2 RET". With
>> cursor in row 2 col 2, I press C-c = and see the attached (empty
>> prompt for a column 2 formula). If I type in 1+2 and press return, the
>> TBLFM line changes to:
>>
>> #+TBLFM: $2=1+2::$$2=1+2
>>
>> If I go to row 3 and C-c = again, pressing RET to accept the default
>> (maybe the formula is "stored" but just not displayed?), it changes to
>> (and nothing is put in row 3 col 2):
>>
>> #+TBLFM: $$2=1+2
>>
>> If I go to row 4 and do this one more time, pressing RET with empty
>> formula, it leaves an empty TBLFM line under the table.
>
> Fixed. Thank you.
>
>
> Regards,
>
> --
> Nicolas Goaziou
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Table formula bug? (TBLFM line populated, but C-c = prompt is empty)
2015-11-23 23:57 ` John Hendy
@ 2015-11-24 0:18 ` Cook, Malcolm
2015-11-24 1:29 ` John Hendy
0 siblings, 1 reply; 6+ messages in thread
From: Cook, Malcolm @ 2015-11-24 0:18 UTC (permalink / raw)
To: 'John Hendy', emacs-orgmode
I just noticed that upon editing a table formula, C-u C-c C-c was updating all but the first instance of formula (all but the first row).
Org-mode version 8.3.2
Could this be related issue?
> -----Original Message-----
> From: emacs-orgmode-bounces+mec=stowers.org@gnu.org [mailto:emacs-
> orgmode-bounces+mec=stowers.org@gnu.org] On Behalf Of John Hendy
> Sent: Monday, November 23, 2015 5:57 PM
> To: John Hendy <jw.hendy@gmail.com>; emacs-orgmode <emacs-
> orgmode@gnu.org>
> Subject: Re: [O] Table formula bug? (TBLFM line populated, but C-c = prompt
> is empty)
>
> Confirmed fixed -- thanks!
>
> John
>
> On Mon, Nov 23, 2015 at 4:24 PM, Nicolas Goaziou <mail@nicolasgoaziou.fr>
> wrote:
> > Hello,
> >
> > John Hendy <jw.hendy@gmail.com> writes:
> >
> >> I was just creating a table and using a formula, finding that C-c =
> >> did not bring up the formula, but acted like I was inputting one for
> >> the first time. I created a min-config and test file to see if this
> >> was something related to my setup, but it seems I can reproduce.
> >>
> >> Org-mode version 8.3.2 (release_8.3.2-338-g522ec9 @
> >> /home/jwhendy/.elisp/org.git/lisp/)
> >>
> >> #+begin_src min-config
> >> ;; set load paths
> >> ;; set load dirs and global config options
> >> (add-to-list 'load-path "~/.elisp/org.git/lisp/")
> >> (add-to-list 'load-path "~/.elisp/org.git/contrib/lisp")
> >> #+end_src
> >>
> >> Emacs started with =emacs -Q=, followed by =M-x load-file RET
> >> ~/Desktop/min-config RET=
> >>
> >> #+begin_src table-test.org
> >>
> >> * Headline
> >>
> >> | something | something else |
> >> |-----------+----------------|
> >> | 1 | 3 |
> >> | 2 | |
> >> | 3 | |
> >> | 4 | |
> >> #+TBLFM: $2=1+2
> >>
> >> #+end_src
> >>
> >> I created the contents in row 1 col 2 by entering "=1+2 RET". With
> >> cursor in row 2 col 2, I press C-c = and see the attached (empty
> >> prompt for a column 2 formula). If I type in 1+2 and press return, the
> >> TBLFM line changes to:
> >>
> >> #+TBLFM: $2=1+2::$$2=1+2
> >>
> >> If I go to row 3 and C-c = again, pressing RET to accept the default
> >> (maybe the formula is "stored" but just not displayed?), it changes to
> >> (and nothing is put in row 3 col 2):
> >>
> >> #+TBLFM: $$2=1+2
> >>
> >> If I go to row 4 and do this one more time, pressing RET with empty
> >> formula, it leaves an empty TBLFM line under the table.
> >
> > Fixed. Thank you.
> >
> >
> > Regards,
> >
> > --
> > Nicolas Goaziou
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Table formula bug? (TBLFM line populated, but C-c = prompt is empty)
2015-11-24 0:18 ` Cook, Malcolm
@ 2015-11-24 1:29 ` John Hendy
2015-11-24 18:11 ` Cook, Malcolm
0 siblings, 1 reply; 6+ messages in thread
From: John Hendy @ 2015-11-24 1:29 UTC (permalink / raw)
To: Cook, Malcolm; +Cc: emacs-orgmode
On Mon, Nov 23, 2015 at 6:18 PM, Cook, Malcolm <MEC@stowers.org> wrote:
> I just noticed that upon editing a table formula, C-u C-c C-c was updating all but the first instance of formula (all but the first row).
>
> Org-mode version 8.3.2
>
> Could this be related issue?
If it was, I can't reproduce it with the latest pull that fixed my
reported issue (I'm now on Org-mode version 8.3.2
(release_8.3.2-342-g50359f @ /home/jwhendy/.elisp/org.git/lisp/)).
In my test, I used =$-1 + 2 for a column formula in row 1, populated
the column with C-u C-c C-c, and then changed row 3's entry to =$-1 +
3. Issuing C-u C-c C-c properly updated all rows.
John
>
>
> > -----Original Message-----
> > From: emacs-orgmode-bounces+mec=stowers.org@gnu.org [mailto:emacs-
> > orgmode-bounces+mec=stowers.org@gnu.org] On Behalf Of John Hendy
> > Sent: Monday, November 23, 2015 5:57 PM
> > To: John Hendy <jw.hendy@gmail.com>; emacs-orgmode <emacs-
> > orgmode@gnu.org>
> > Subject: Re: [O] Table formula bug? (TBLFM line populated, but C-c = prompt
> > is empty)
> >
> > Confirmed fixed -- thanks!
> >
> > John
> >
> > On Mon, Nov 23, 2015 at 4:24 PM, Nicolas Goaziou <mail@nicolasgoaziou.fr>
> > wrote:
> > > Hello,
> > >
> > > John Hendy <jw.hendy@gmail.com> writes:
> > >
> > >> I was just creating a table and using a formula, finding that C-c =
> > >> did not bring up the formula, but acted like I was inputting one for
> > >> the first time. I created a min-config and test file to see if this
> > >> was something related to my setup, but it seems I can reproduce.
> > >>
> > >> Org-mode version 8.3.2 (release_8.3.2-338-g522ec9 @
> > >> /home/jwhendy/.elisp/org.git/lisp/)
> > >>
> > >> #+begin_src min-config
> > >> ;; set load paths
> > >> ;; set load dirs and global config options
> > >> (add-to-list 'load-path "~/.elisp/org.git/lisp/")
> > >> (add-to-list 'load-path "~/.elisp/org.git/contrib/lisp")
> > >> #+end_src
> > >>
> > >> Emacs started with =emacs -Q=, followed by =M-x load-file RET
> > >> ~/Desktop/min-config RET=
> > >>
> > >> #+begin_src table-test.org
> > >>
> > >> * Headline
> > >>
> > >> | something | something else |
> > >> |-----------+----------------|
> > >> | 1 | 3 |
> > >> | 2 | |
> > >> | 3 | |
> > >> | 4 | |
> > >> #+TBLFM: $2=1+2
> > >>
> > >> #+end_src
> > >>
> > >> I created the contents in row 1 col 2 by entering "=1+2 RET". With
> > >> cursor in row 2 col 2, I press C-c = and see the attached (empty
> > >> prompt for a column 2 formula). If I type in 1+2 and press return, the
> > >> TBLFM line changes to:
> > >>
> > >> #+TBLFM: $2=1+2::$$2=1+2
> > >>
> > >> If I go to row 3 and C-c = again, pressing RET to accept the default
> > >> (maybe the formula is "stored" but just not displayed?), it changes to
> > >> (and nothing is put in row 3 col 2):
> > >>
> > >> #+TBLFM: $$2=1+2
> > >>
> > >> If I go to row 4 and do this one more time, pressing RET with empty
> > >> formula, it leaves an empty TBLFM line under the table.
> > >
> > > Fixed. Thank you.
> > >
> > >
> > > Regards,
> > >
> > > --
> > > Nicolas Goaziou
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Table formula bug? (TBLFM line populated, but C-c = prompt is empty)
2015-11-24 1:29 ` John Hendy
@ 2015-11-24 18:11 ` Cook, Malcolm
0 siblings, 0 replies; 6+ messages in thread
From: Cook, Malcolm @ 2015-11-24 18:11 UTC (permalink / raw)
To: 'John Hendy'; +Cc: emacs-orgmode
> > I just noticed that upon editing a table formula, C-u C-c C-c was updating all
> but the first instance of formula (all but the first row).
> >
> > Org-mode version 8.3.2
> >
> > Could this be related issue?
>
> If it was, I can't reproduce it with the latest pull that fixed my
> reported issue (I'm now on Org-mode version 8.3.2
> (release_8.3.2-342-g50359f @ /home/jwhendy/.elisp/org.git/lisp/)).
>
> In my test, I used =$-1 + 2 for a column formula in row 1, populated
> the column with C-u C-c C-c, and then changed row 3's entry to =$-1 +
> 3. Issuing C-u C-c C-c properly updated all rows.
Hi John - thanks - must be finger trouble on my end - I can no longer reproduce it (but have updated org just for good measure anyway).
~Malcolm
>
>
> John
>
> >
> >
> > > -----Original Message-----
> > > From: emacs-orgmode-bounces+mec=stowers.org@gnu.org
> [mailto:emacs-
> > > orgmode-bounces+mec=stowers.org@gnu.org] On Behalf Of John Hendy
> > > Sent: Monday, November 23, 2015 5:57 PM
> > > To: John Hendy <jw.hendy@gmail.com>; emacs-orgmode <emacs-
> > > orgmode@gnu.org>
> > > Subject: Re: [O] Table formula bug? (TBLFM line populated, but C-c =
> prompt
> > > is empty)
> > >
> > > Confirmed fixed -- thanks!
> > >
> > > John
> > >
> > > On Mon, Nov 23, 2015 at 4:24 PM, Nicolas Goaziou
> <mail@nicolasgoaziou.fr>
> > > wrote:
> > > > Hello,
> > > >
> > > > John Hendy <jw.hendy@gmail.com> writes:
> > > >
> > > >> I was just creating a table and using a formula, finding that C-c =
> > > >> did not bring up the formula, but acted like I was inputting one for
> > > >> the first time. I created a min-config and test file to see if this
> > > >> was something related to my setup, but it seems I can reproduce.
> > > >>
> > > >> Org-mode version 8.3.2 (release_8.3.2-338-g522ec9 @
> > > >> /home/jwhendy/.elisp/org.git/lisp/)
> > > >>
> > > >> #+begin_src min-config
> > > >> ;; set load paths
> > > >> ;; set load dirs and global config options
> > > >> (add-to-list 'load-path "~/.elisp/org.git/lisp/")
> > > >> (add-to-list 'load-path "~/.elisp/org.git/contrib/lisp")
> > > >> #+end_src
> > > >>
> > > >> Emacs started with =emacs -Q=, followed by =M-x load-file RET
> > > >> ~/Desktop/min-config RET=
> > > >>
> > > >> #+begin_src table-test.org
> > > >>
> > > >> * Headline
> > > >>
> > > >> | something | something else |
> > > >> |-----------+----------------|
> > > >> | 1 | 3 |
> > > >> | 2 | |
> > > >> | 3 | |
> > > >> | 4 | |
> > > >> #+TBLFM: $2=1+2
> > > >>
> > > >> #+end_src
> > > >>
> > > >> I created the contents in row 1 col 2 by entering "=1+2 RET". With
> > > >> cursor in row 2 col 2, I press C-c = and see the attached (empty
> > > >> prompt for a column 2 formula). If I type in 1+2 and press return, the
> > > >> TBLFM line changes to:
> > > >>
> > > >> #+TBLFM: $2=1+2::$$2=1+2
> > > >>
> > > >> If I go to row 3 and C-c = again, pressing RET to accept the default
> > > >> (maybe the formula is "stored" but just not displayed?), it changes to
> > > >> (and nothing is put in row 3 col 2):
> > > >>
> > > >> #+TBLFM: $$2=1+2
> > > >>
> > > >> If I go to row 4 and do this one more time, pressing RET with empty
> > > >> formula, it leaves an empty TBLFM line under the table.
> > > >
> > > > Fixed. Thank you.
> > > >
> > > >
> > > > Regards,
> > > >
> > > > --
> > > > Nicolas Goaziou
> >
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-11-24 18:11 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-11-23 19:07 Table formula bug? (TBLFM line populated, but C-c = prompt is empty) John Hendy
2015-11-23 22:24 ` Nicolas Goaziou
2015-11-23 23:57 ` John Hendy
2015-11-24 0:18 ` Cook, Malcolm
2015-11-24 1:29 ` John Hendy
2015-11-24 18:11 ` Cook, Malcolm
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.