* LaTeX beamer class text
@ 2011-04-27 12:36 John Tait
2011-04-27 16:20 ` Matt Lundin
0 siblings, 1 reply; 6+ messages in thread
From: John Tait @ 2011-04-27 12:36 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 304 bytes --]
Hi
When I export an Org file to LaTeX class beamer, much of the content can be
pushed off the bottom of the slide if it doesn't all fit on one slide.
Other than restricting the amount of text content under headings, is there a
simple way of allowing content to spill onto the next slide?
Thanks
John
[-- Attachment #2: Type: text/html, Size: 1099 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: LaTeX beamer class text
2011-04-27 12:36 LaTeX beamer class text John Tait
@ 2011-04-27 16:20 ` Matt Lundin
2011-04-28 22:49 ` John Tait
2011-05-03 11:21 ` John Tait
0 siblings, 2 replies; 6+ messages in thread
From: Matt Lundin @ 2011-04-27 16:20 UTC (permalink / raw)
To: John Tait; +Cc: emacs-orgmode
John Tait <johngtait@gmail.com> writes:
> Hi
>
> When I export an Org file to LaTeX class beamer, much of the content
> can be pushed off the bottom of the slide if it doesn't all fit on one
> slide.
>
> Other than restricting the amount of text content under headings, is
> there a simple way of allowing content to spill onto the next slide?
In LaTeX, you can add the following option to the frame:
\begin{frame}[allowframebreaks]
So in org-mode, you could modify :BEAMER_envargs:.
* A slide
:PROPERTIES:
:BEAMER_envargs: [allowframebreaks]
:END:
Best,
Matt
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: LaTeX beamer class text
2011-04-27 16:20 ` Matt Lundin
@ 2011-04-28 22:49 ` John Tait
2011-05-03 11:21 ` John Tait
1 sibling, 0 replies; 6+ messages in thread
From: John Tait @ 2011-04-28 22:49 UTC (permalink / raw)
To: Matt Lundin, emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 843 bytes --]
Thanks Matt. It works really well.
I need to set org-use-property-inheritance to t, so that subheadings follow
through, but it's really easy.
Cheers
John
On Wed, Apr 27, 2011 at 5:20 PM, Matt Lundin <mdl@imapmail.org> wrote:
> John Tait <johngtait@gmail.com> writes:
>
> > Hi
> >
> > When I export an Org file to LaTeX class beamer, much of the content
> > can be pushed off the bottom of the slide if it doesn't all fit on one
> > slide.
> >
> > Other than restricting the amount of text content under headings, is
> > there a simple way of allowing content to spill onto the next slide?
>
> In LaTeX, you can add the following option to the frame:
>
> \begin{frame}[allowframebreaks]
>
> So in org-mode, you could modify :BEAMER_envargs:.
>
> * A slide
> :PROPERTIES:
> :BEAMER_envargs: [allowframebreaks]
> :END:
>
> Best,
> Matt
>
[-- Attachment #2: Type: text/html, Size: 1367 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: LaTeX beamer class text
2011-04-27 16:20 ` Matt Lundin
2011-04-28 22:49 ` John Tait
@ 2011-05-03 11:21 ` John Tait
2011-05-05 7:50 ` Eric S Fraga
1 sibling, 1 reply; 6+ messages in thread
From: John Tait @ 2011-05-03 11:21 UTC (permalink / raw)
To: Matt Lundin, emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 1628 bytes --]
Matt (and Daniel Bausch -- sorry for double post earlier)
I've found that beamer "allowframebreaks" doesn't work for Org files that
have been included with #+INCLUDE: .
I've tried adding the proporites list to both the main Org file and in the
included files, and made sure that "org-use-property-inheritance" is set to
t, but it doesn't seem to work with included files.
I tried adding the following to both the main and included Org files, but
this doesn't work either. (I'm getting a very long list of error messages,
though maybe most are not relevant.) I
set "org-export-with-LaTeX-fragments" to t as well, and the simple LaTeX
example from 11.7.3 works as well. Sorry, I'm a novice at writing all but
the most basic LaTeX files by hand, and I imagine this can't be used as a
global setting anyway.
\begin{frame}[allowframebreaks]
\end
Is there a way to "allowframebreaks" work globally or at least in included
files?
Thanks
John
On Wed, Apr 27, 2011 at 5:20 PM, Matt Lundin <mdl@imapmail.org> wrote:
> John Tait <johngtait@gmail.com> writes:
>
> > Hi
> >
> > When I export an Org file to LaTeX class beamer, much of the content
> > can be pushed off the bottom of the slide if it doesn't all fit on one
> > slide.
> >
> > Other than restricting the amount of text content under headings, is
> > there a simple way of allowing content to spill onto the next slide?
>
> In LaTeX, you can add the following option to the frame:
>
> \begin{frame}[allowframebreaks]
>
> So in org-mode, you could modify :BEAMER_envargs:.
>
> * A slide
> :PROPERTIES:
> :BEAMER_envargs: [allowframebreaks]
> :END:
>
> Best,
> Matt
>
[-- Attachment #2: Type: text/html, Size: 2348 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: LaTeX beamer class text
2011-05-03 11:21 ` John Tait
@ 2011-05-05 7:50 ` Eric S Fraga
2011-05-05 11:57 ` John Tait
0 siblings, 1 reply; 6+ messages in thread
From: Eric S Fraga @ 2011-05-05 7:50 UTC (permalink / raw)
To: John Tait; +Cc: emacs-orgmode
John Tait <johngtait@gmail.com> writes:
> Matt (and Daniel Bausch -- sorry for double post earlier)
>
> I've found that beamer "allowframebreaks" doesn't work for Org files that
> have been included with #+INCLUDE: .
[...]
> Is there a way to "allowframebreaks" work globally or at least in included
> files?
I've gone through the beamer manual but haven't seen any way of doing
so. However, it was a cursory look so maybe you could check it out more
closely (the manual is >200 pages long...).
I wouldn't recommend allowframebreaks as a global option, in any case.
IMO, that leads to sloppy slide design, but this *is* my opinion only!
There are times where it is needed but it is generally better to be
conscious of needing it. Just my two ¢...
--
: Eric S Fraga (GnuPG: 0xC89193D8FFFCF67D) in Emacs 24.0.50.1
: using Org-mode version 7.5 (release_7.5.249.gbf7ce.dirty)
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: LaTeX beamer class text
2011-05-05 7:50 ` Eric S Fraga
@ 2011-05-05 11:57 ` John Tait
0 siblings, 0 replies; 6+ messages in thread
From: John Tait @ 2011-05-05 11:57 UTC (permalink / raw)
To: emacs-orgmode, e.fraga
[-- Attachment #1: Type: text/plain, Size: 1477 bytes --]
Thanks for your reply. I think a global option would be useful because I
mightn't know in advance whether I'd need slides for particular headings or
not. I'm thinking of a use case where I have produced a long LaTeX article
and have selected certain tags to do so, and I would build a beamer
presentation to brief it out by adding a :briefing: tag to a subset of the
exported article headings (so the beamer slides are more concise).
John
On Thu, May 5, 2011 at 8:50 AM, Eric S Fraga <e.fraga@ucl.ac.uk> wrote:
> John Tait <johngtait@gmail.com> writes:
>
> > Matt (and Daniel Bausch -- sorry for double post earlier)
> >
> > I've found that beamer "allowframebreaks" doesn't work for Org files that
> > have been included with #+INCLUDE: .
>
> [...]
>
> > Is there a way to "allowframebreaks" work globally or at least in
> included
> > files?
>
> I've gone through the beamer manual but haven't seen any way of doing
> so. However, it was a cursory look so maybe you could check it out more
> closely (the manual is >200 pages long...).
>
> I wouldn't recommend allowframebreaks as a global option, in any case.
> IMO, that leads to sloppy slide design, but this *is* my opinion only!
> There are times where it is needed but it is generally better to be
> conscious of needing it. Just my two ¢...
>
> --
> : Eric S Fraga (GnuPG: 0xC89193D8FFFCF67D) in Emacs 24.0.50.1
> : using Org-mode version 7.5 (release_7.5.249.gbf7ce.dirty)
>
[-- Attachment #2: Type: text/html, Size: 1977 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-05-05 11:57 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-04-27 12:36 LaTeX beamer class text John Tait
2011-04-27 16:20 ` Matt Lundin
2011-04-28 22:49 ` John Tait
2011-05-03 11:21 ` John Tait
2011-05-05 7:50 ` Eric S Fraga
2011-05-05 11:57 ` John Tait
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.