* Texi2dvi: forcing a recompile?
@ 2010-12-02 22:55 Jeff Horn
2010-12-02 22:56 ` Jeff Horn
[not found] ` <4CFAA27C.3020509@pobox.com>
0 siblings, 2 replies; 7+ messages in thread
From: Jeff Horn @ 2010-12-02 22:55 UTC (permalink / raw
To: Org-mode ml
Just a heads up: it looks like using texi2dvi for
org-latex-to-pdf-process will not recompile a tex file in certain
cases. I have different output and source directories, and when I
publish a changed org file, texi2dvi appears to not process a tex file
when the pdf is already in the output directory.
I guess this could be an org-mode bug, since that default behavior
doesn't make sense and texi2dvi doesn't have a "force" flag. To me, it
appears that org-mode picks up the change in the org file and creates
the tex document correctly. The pdf isn't recreated unless I delete
the pdf in the output directory and then call org-publish-project
again.
Jeff
--
Jeffrey Horn
Graduate Lecturer and PhD Student in Economics
George Mason University
(704) 271-4797
jhorn@gmu.edu
jrhorn424@gmail.com
http://www.failuretorefrain.com/jeff/
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Texi2dvi: forcing a recompile?
2010-12-02 22:55 Texi2dvi: forcing a recompile? Jeff Horn
@ 2010-12-02 22:56 ` Jeff Horn
[not found] ` <4CFAA27C.3020509@pobox.com>
1 sibling, 0 replies; 7+ messages in thread
From: Jeff Horn @ 2010-12-02 22:56 UTC (permalink / raw
To: Org-mode ml
BTW, the HTML file is updated fine in the output directory. Seems like
it *is* texi2dvi.
Jeff
On Thu, Dec 2, 2010 at 5:55 PM, Jeff Horn <jrhorn424@gmail.com> wrote:
> Just a heads up: it looks like using texi2dvi for
> org-latex-to-pdf-process will not recompile a tex file in certain
> cases. I have different output and source directories, and when I
> publish a changed org file, texi2dvi appears to not process a tex file
> when the pdf is already in the output directory.
>
> I guess this could be an org-mode bug, since that default behavior
> doesn't make sense and texi2dvi doesn't have a "force" flag. To me, it
> appears that org-mode picks up the change in the org file and creates
> the tex document correctly. The pdf isn't recreated unless I delete
> the pdf in the output directory and then call org-publish-project
> again.
>
> Jeff
>
> --
> Jeffrey Horn
> Graduate Lecturer and PhD Student in Economics
> George Mason University
>
> (704) 271-4797
> jhorn@gmu.edu
> jrhorn424@gmail.com
>
> http://www.failuretorefrain.com/jeff/
>
--
Jeffrey Horn
Graduate Lecturer and PhD Student in Economics
George Mason University
(704) 271-4797
jhorn@gmu.edu
jrhorn424@gmail.com
http://www.failuretorefrain.com/jeff/
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Texi2dvi: forcing a recompile?
[not found] ` <4CFAA27C.3020509@pobox.com>
@ 2010-12-04 20:22 ` Jeff Horn
2010-12-04 20:28 ` Jeff Horn
0 siblings, 1 reply; 7+ messages in thread
From: Jeff Horn @ 2010-12-04 20:22 UTC (permalink / raw
To: mike.mclean; +Cc: Org-mode ml
On Sat, Dec 4, 2010 at 3:20 PM, Mike McLean <mike.mclean@pobox.com> wrote:
> I solve this with a forced remove:
>
> (setq org-latex-to-pdf-process (quote ("rm %b.pdf" "texi2dvi -p -b -c -V
> %f")))
Nice! Very clever. Thanks for the tip! (CC-ing to the list, hope that's OK)
--
Jeffrey Horn
Graduate Lecturer and PhD Student in Economics
George Mason University
(704) 271-4797
jhorn@gmu.edu
jrhorn424@gmail.com
http://www.failuretorefrain.com/jeff/
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Texi2dvi: forcing a recompile?
2010-12-04 20:22 ` Jeff Horn
@ 2010-12-04 20:28 ` Jeff Horn
2010-12-04 20:46 ` Joost Kremers
2010-12-04 22:50 ` Mike McLean
0 siblings, 2 replies; 7+ messages in thread
From: Jeff Horn @ 2010-12-04 20:28 UTC (permalink / raw
To: mike.mclean; +Cc: Org-mode ml
Small problem: if the file doesn't exist, rm fails with error, which
stops the process (the PDF file is not produced). This happens if I
create a new source file in my project.
On Sat, Dec 4, 2010 at 3:22 PM, Jeff Horn <jrhorn424@gmail.com> wrote:
> On Sat, Dec 4, 2010 at 3:20 PM, Mike McLean <mike.mclean@pobox.com> wrote:
>> I solve this with a forced remove:
>>
>> (setq org-latex-to-pdf-process (quote ("rm %b.pdf" "texi2dvi -p -b -c -V
>> %f")))
>
> Nice! Very clever. Thanks for the tip! (CC-ing to the list, hope that's OK)
>
> --
> Jeffrey Horn
> Graduate Lecturer and PhD Student in Economics
> George Mason University
>
> (704) 271-4797
> jhorn@gmu.edu
> jrhorn424@gmail.com
>
> http://www.failuretorefrain.com/jeff/
>
--
Jeffrey Horn
Graduate Lecturer and PhD Student in Economics
George Mason University
(704) 271-4797
jhorn@gmu.edu
jrhorn424@gmail.com
http://www.failuretorefrain.com/jeff/
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Texi2dvi: forcing a recompile?
2010-12-04 20:28 ` Jeff Horn
@ 2010-12-04 20:46 ` Joost Kremers
2010-12-04 21:17 ` Jeff Horn
2010-12-04 22:50 ` Mike McLean
1 sibling, 1 reply; 7+ messages in thread
From: Joost Kremers @ 2010-12-04 20:46 UTC (permalink / raw
To: emacs-orgmode
On Sat, Dec 04, 2010 at 03:28:30PM -0500, Jeff Horn wrote:
> On Sat, Dec 4, 2010 at 3:22 PM, Jeff Horn <jrhorn424@gmail.com> wrote:
> > On Sat, Dec 4, 2010 at 3:20 PM, Mike McLean <mike.mclean@pobox.com> wrote:
> >> I solve this with a forced remove:
> >>
> >> (setq org-latex-to-pdf-process (quote ("rm %b.pdf" "texi2dvi -p -b -c -V
> >> %f")))
> >
> > Nice! Very clever. Thanks for the tip! (CC-ing to the list, hope that's OK)
>
> Small problem: if the file doesn't exist, rm fails with error, which
> stops the process (the PDF file is not produced). This happens if I
> create a new source file in my project.
change "rm %b-pdf" to "rm -f %b.pdf", that should take care of it.
--
Dr. Joost Kremers
Georg-August-Universität
Seminar für Deutsche Philologie
Käte-Hamburger-Weg 3
D-37073 Göttingen
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Texi2dvi: forcing a recompile?
2010-12-04 20:46 ` Joost Kremers
@ 2010-12-04 21:17 ` Jeff Horn
0 siblings, 0 replies; 7+ messages in thread
From: Jeff Horn @ 2010-12-04 21:17 UTC (permalink / raw
To: Joost Kremers; +Cc: emacs-orgmode
Thanks for the help. I'm not really sure what's going on. A PDF file
is produced in my source directory, but not in my output directory. I
receive an error message saying the PDF file was not produced.
I didn't realize the customize menu had many different processes in
the value menu. I wanted something that would run bibtex, and I see
there is a process that runs pdflatex, bibtex, then pdflatex twice
more.
I get the expected result with that process, so I think I'll stick
with it for now.
Thanks for the help,
Jeff
On Sat, Dec 4, 2010 at 3:46 PM, Joost Kremers <joostkremers@fastmail.fm> wrote:
> On Sat, Dec 04, 2010 at 03:28:30PM -0500, Jeff Horn wrote:
>> On Sat, Dec 4, 2010 at 3:22 PM, Jeff Horn <jrhorn424@gmail.com> wrote:
>> > On Sat, Dec 4, 2010 at 3:20 PM, Mike McLean <mike.mclean@pobox.com> wrote:
>> >> I solve this with a forced remove:
>> >>
>> >> (setq org-latex-to-pdf-process (quote ("rm %b.pdf" "texi2dvi -p -b -c -V
>> >> %f")))
>> >
>> > Nice! Very clever. Thanks for the tip! (CC-ing to the list, hope that's OK)
>>
>> Small problem: if the file doesn't exist, rm fails with error, which
>> stops the process (the PDF file is not produced). This happens if I
>> create a new source file in my project.
>
> change "rm %b-pdf" to "rm -f %b.pdf", that should take care of it.
>
> --
> Dr. Joost Kremers
> Georg-August-Universität
> Seminar für Deutsche Philologie
> Käte-Hamburger-Weg 3
> D-37073 Göttingen
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
--
Jeffrey Horn
Graduate Lecturer and PhD Student in Economics
George Mason University
(704) 271-4797
jhorn@gmu.edu
jrhorn424@gmail.com
http://www.failuretorefrain.com/jeff/
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Texi2dvi: forcing a recompile?
2010-12-04 20:28 ` Jeff Horn
2010-12-04 20:46 ` Joost Kremers
@ 2010-12-04 22:50 ` Mike McLean
1 sibling, 0 replies; 7+ messages in thread
From: Mike McLean @ 2010-12-04 22:50 UTC (permalink / raw
To: Org-mode ml
In my case the rm does generate an error, but the process doesn't stop.
On 12/4/10 3:28 PM, Jeff Horn wrote:
> Small problem: if the file doesn't exist, rm fails with error, which
> stops the process (the PDF file is not produced). This happens if I
> create a new source file in my project.
>
> On Sat, Dec 4, 2010 at 3:22 PM, Jeff Horn <jrhorn424@gmail.com> wrote:
>> On Sat, Dec 4, 2010 at 3:20 PM, Mike McLean <mike.mclean@pobox.com> wrote:
>>> I solve this with a forced remove:
>>>
>>> (setq org-latex-to-pdf-process (quote ("rm %b.pdf" "texi2dvi -p -b -c -V
>>> %f")))
>> Nice! Very clever. Thanks for the tip! (CC-ing to the list, hope that's OK)
>>
>> --
>> Jeffrey Horn
>> Graduate Lecturer and PhD Student in Economics
>> George Mason University
>>
>> (704) 271-4797
>> jhorn@gmu.edu
>> jrhorn424@gmail.com
>>
>> http://www.failuretorefrain.com/jeff/
>>
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2010-12-04 22:50 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-12-02 22:55 Texi2dvi: forcing a recompile? Jeff Horn
2010-12-02 22:56 ` Jeff Horn
[not found] ` <4CFAA27C.3020509@pobox.com>
2010-12-04 20:22 ` Jeff Horn
2010-12-04 20:28 ` Jeff Horn
2010-12-04 20:46 ` Joost Kremers
2010-12-04 21:17 ` Jeff Horn
2010-12-04 22:50 ` Mike McLean
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.