* New to org-capture (and org-remember) @ 2010-07-01 15:28 Stephen Eglen 2010-07-01 15:31 ` Carsten Dominik 2010-07-01 15:50 ` Memnon Anon 0 siblings, 2 replies; 5+ messages in thread From: Stephen Eglen @ 2010-07-01 15:28 UTC (permalink / raw) To: emacs-orgmode; +Cc: Stephen Eglen I'd like to try out org-capture. I've never used org-remember before so I have no templates to convert. Do I make the new ones in pretty much the same way as the manual describes for org-remember? Or should I be patient, and wait for org-capture to stabilise? Thanks, Stephen ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: New to org-capture (and org-remember) 2010-07-01 15:28 New to org-capture (and org-remember) Stephen Eglen @ 2010-07-01 15:31 ` Carsten Dominik 2010-07-01 15:50 ` Memnon Anon 1 sibling, 0 replies; 5+ messages in thread From: Carsten Dominik @ 2010-07-01 15:31 UTC (permalink / raw) To: Stephen Eglen; +Cc: emacs-orgmode org-capture is going to be the future, so go for it. Most things work well, except for the file+function and file+regexp targets. Yes, make them like the remember ones. Just call org-capture, and press 'C' to get to the customize buffer. If you have the git distribution, you can do make doc/org.pdf to get the new manual where the remember section has already been replaced with one about capture. - Carsten On Jul 1, 2010, at 5:28 PM, Stephen Eglen wrote: > I'd like to try out org-capture. > > I've never used org-remember before so I have no templates to convert. > Do I make the new ones in pretty much the same way as the manual > describes for org-remember? > > Or should I be patient, and wait for org-capture to stabilise? > > Thanks, Stephen > > _______________________________________________ > Emacs-orgmode mailing list > Please use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode - Carsten ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: New to org-capture (and org-remember) 2010-07-01 15:28 New to org-capture (and org-remember) Stephen Eglen 2010-07-01 15:31 ` Carsten Dominik @ 2010-07-01 15:50 ` Memnon Anon 2010-07-02 8:43 ` Stephen Eglen 1 sibling, 1 reply; 5+ messages in thread From: Memnon Anon @ 2010-07-01 15:50 UTC (permalink / raw) To: Stephen Eglen; +Cc: emacs-orgmode Stephen Eglen <S.J.Eglen@damtp.cam.ac.uk> writes: > I'd like to try out org-capture. > > I've never used org-remember before so I have no templates to convert. > Do I make the new ones in pretty much the same way as the manual > describes for org-remember? > > Or should I be patient, and wait for org-capture to stabilise? Hi, to quote the fine manual: ,----[ (info "(org)Capture templates") ] | You can use templates to arrange for different types of capture items, | and for different target locations. The easiest way to set up such | templates is through the customize interface. | | `C-c c C' | Customize the variable `org-capture-templates'. `---- Is your documentation uptodate? You should find all the information in "9.1 Capture" and its subnodes to get you started. Argh, org-capture.el is not part of the current stable release. So, if you want to try, you need the development version, either with git or download org-latest (link is on orgmode.org). If you still encounter any problems, please describe them so the documentation can be improved :). ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: New to org-capture (and org-remember) 2010-07-01 15:50 ` Memnon Anon @ 2010-07-02 8:43 ` Stephen Eglen 2010-07-02 8:57 ` Carsten Dominik 0 siblings, 1 reply; 5+ messages in thread From: Stephen Eglen @ 2010-07-02 8:43 UTC (permalink / raw) To: Memnon Anon; +Cc: emacs-orgmode, Stephen Eglen Memnon Anon <gegendosenfleisch@googlemail.com> wrote: > Stephen Eglen <S.J.Eglen@damtp.cam.ac.uk> writes: > > > I'd like to try out org-capture. > > > > I've never used org-remember before so I have no templates to convert. > > Do I make the new ones in pretty much the same way as the manual > > describes for org-remember? > > > > Or should I be patient, and wait for org-capture to stabilise? > > Hi, > > to quote the fine manual: > > ,----[ (info "(org)Capture templates") ] > | You can use templates to arrange for different types of capture items, > | and for different target locations. The easiest way to set up such > | templates is through the customize interface. > | > | `C-c c C' > | Customize the variable `org-capture-templates'. > `---- > > Is your documentation uptodate? > > You should find all the information in "9.1 Capture" and its > subnodes to get you started. > > Argh, org-capture.el is not part of the current stable release. > So, if you want to try, you need the development version, either > with git or download org-latest (link is on orgmode.org). > > If you still encounter any problems, please describe them so the > documentation can be improved :). Thanks for this. I have read the nice docs (and found some small typos - will send a patch). One thing immediately struck me: sec 9.1.1. mentions setting: org-default-notes-file but I couldn't see that mentioned in the rest of the chapter. Its docstring would indicate its needed by remember.el, so perhaps there is no need any more to set org-default-notes-file? Stephen ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Re: New to org-capture (and org-remember) 2010-07-02 8:43 ` Stephen Eglen @ 2010-07-02 8:57 ` Carsten Dominik 0 siblings, 0 replies; 5+ messages in thread From: Carsten Dominik @ 2010-07-02 8:57 UTC (permalink / raw) To: Stephen Eglen; +Cc: Memnon Anon, emacs-orgmode Hi Stephen, On Jul 2, 2010, at 10:43 AM, Stephen Eglen wrote: > Memnon Anon <gegendosenfleisch@googlemail.com> wrote: > >> Stephen Eglen <S.J.Eglen@damtp.cam.ac.uk> writes: >> >>> I'd like to try out org-capture. >>> >>> I've never used org-remember before so I have no templates to >>> convert. >>> Do I make the new ones in pretty much the same way as the manual >>> describes for org-remember? >>> >>> Or should I be patient, and wait for org-capture to stabilise? >> >> Hi, >> >> to quote the fine manual: >> >> ,----[ (info "(org)Capture templates") ] >> | You can use templates to arrange for different types of capture >> items, >> | and for different target locations. The easiest way to set up such >> | templates is through the customize interface. >> | >> | `C-c c C' >> | Customize the variable `org-capture-templates'. >> `---- >> >> Is your documentation uptodate? >> >> You should find all the information in "9.1 Capture" and its >> subnodes to get you started. >> >> Argh, org-capture.el is not part of the current stable release. >> So, if you want to try, you need the development version, either >> with git or download org-latest (link is on orgmode.org). >> >> If you still encounter any problems, please describe them so the >> documentation can be improved :). > > Thanks for this. I have read the nice docs (and found some small > typos > - will send a patch). Proofreading that section carefully would be much appreciated. Also better wording etc. I am known as the worst typist in the world, and I know that my English is reasonably good but not nearly perfect. > > One thing immediately struck me: sec 9.1.1. mentions setting: > org-default-notes-file > but I couldn't see that mentioned in the rest of the chapter. Its > docstring would indicate its needed by remember.el, so perhaps there > is > no need any more to set org-default-notes-file? I have just updated this docstring, thanks for noticing this. This variable is not necessary, but it is used if you are too lazy to give a target file in the template definition. - Carsten ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2010-07-02 8:57 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-07-01 15:28 New to org-capture (and org-remember) Stephen Eglen 2010-07-01 15:31 ` Carsten Dominik 2010-07-01 15:50 ` Memnon Anon 2010-07-02 8:43 ` Stephen Eglen 2010-07-02 8:57 ` Carsten Dominik
Code repositories for project(s) associated with this external index https://git.savannah.gnu.org/cgit/emacs.git https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.