* bug#14637: recent viper-mode regression
@ 2013-06-16 22:59 Jim Meyering
2013-06-18 20:25 ` Juri Linkov
[not found] ` <handler.14637.D14637.13715874305307.notifdone@debbugs.gnu.org>
0 siblings, 2 replies; 6+ messages in thread
From: Jim Meyering @ 2013-06-16 22:59 UTC (permalink / raw)
To: 14637
Hello,
I periodically use built-from-git emacs and noticed that in the
last couple of weeks a common command in viper-mode, "!Ggrep ..."
had begun to malfunction. Normally, !G<cmd> runs CMD on the contents
of the buffer (from the line with point to EOF) and replaces those
lines with the output of the command.
Now, however, it merely appends the result, instead of replacing the
source lines.
E.g., if you run this,
seq 10 > k; emacs -q -nw -f viper-mode k
then type "!Ggrep 3", you'll end up with this in your buffer:
1
2
3
4
5
6
7
8
9
10
3
Instead, the buffer should (and used to) contain this single line:
3
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#14637: recent viper-mode regression
2013-06-16 22:59 bug#14637: recent viper-mode regression Jim Meyering
@ 2013-06-18 20:25 ` Juri Linkov
2013-06-19 0:28 ` Stefan Monnier
[not found] ` <handler.14637.D14637.13715874305307.notifdone@debbugs.gnu.org>
1 sibling, 1 reply; 6+ messages in thread
From: Juri Linkov @ 2013-06-18 20:25 UTC (permalink / raw)
To: Jim Meyering; +Cc: 14637-done
> Now, however, it merely appends the result, instead of replacing the
> source lines.
I know nothing about viper-mode, but apparently this regression is
caused by revno:112695 that now requires for the callers of
`shell-command-on-region' to explicitly specify its argument REPLACE
as documented in its docstring for a long time. However, this fix
breaks such callers that don't care about providing the correct
non-nil REPLACE argument to behave according to the documentation.
Grepping for `shell-command-on-region' revealed the exhaustive list
of the callers that are fixed now with this patch to set both args
OUTPUT-BUFFER and REPLACE to the same value in unison:
=== modified file 'lisp/emulation/vi.el'
--- lisp/emulation/vi.el 2012-09-17 05:41:04 +0000
+++ lisp/emulation/vi.el 2013-06-18 20:17:20 +0000
@@ -1148,7 +1148,8 @@ (defun vi-shell-op (motion-command arg &
(cond ((null shell-command)
(setq shell-command (read-string "!" nil))
(setq vi-last-shell-command shell-command)))
- (shell-command-on-region begin end shell-command (not (vi-prefix-char-value arg)))
+ (shell-command-on-region begin end shell-command (not (vi-prefix-char-value arg))
+ (not (vi-prefix-char-value arg)))
t)))
(defun vi-shift-op (motion-command arg amount)
=== modified file 'lisp/emulation/vip.el'
--- lisp/emulation/vip.el 2013-03-12 02:08:21 +0000
+++ lisp/emulation/vip.el 2013-06-18 20:17:24 +0000
@@ -775,7 +775,7 @@ (defun vip-execute-com (m-com val com)
(if (= com ?!)
(setq vip-last-shell-com (vip-read-string "!"))
vip-last-shell-com)
- t)))
+ t t)))
((= com ?=)
(save-excursion
(set-mark vip-com-point)
@@ -3042,7 +3042,7 @@ (defun ex-command ()
(goto-char beg)
(set-mark end)
(vip-enlarge-region (point) (mark))
- (shell-command-on-region (point) (mark) command t))
+ (shell-command-on-region (point) (mark) command t t))
(goto-char beg)))))
(defun ex-line-no ()
=== modified file 'lisp/emulation/viper-cmd.el'
--- lisp/emulation/viper-cmd.el 2013-05-22 03:21:30 +0000
+++ lisp/emulation/viper-cmd.el 2013-06-18 20:17:31 +0000
@@ -1548,7 +1548,7 @@ (defun viper-exec-bang (m-com com)
(car viper-shell-history)
))
viper-last-shell-com)
- t)))
+ t t)))
(defun viper-exec-equals (m-com com)
(save-excursion
=== modified file 'lisp/emulation/viper-ex.el'
--- lisp/emulation/viper-ex.el 2013-05-22 03:21:30 +0000
+++ lisp/emulation/viper-ex.el 2013-06-18 20:17:34 +0000
@@ -2176,7 +2176,7 @@ (defun ex-command ()
(goto-char beg)
(set-mark end)
(viper-enlarge-region (point) (mark t))
- (shell-command-on-region (point) (mark t) command t))
+ (shell-command-on-region (point) (mark t) command t t))
(goto-char beg)))))
(defun ex-compile ()
=== modified file 'lisp/mh-e/mh-alias.el'
--- lisp/mh-e/mh-alias.el 2013-01-01 09:11:05 +0000
+++ lisp/mh-e/mh-alias.el 2013-06-18 20:17:37 +0000
@@ -141,7 +141,7 @@ (defun mh-alias-local-users ()
(insert-file-contents "/etc/passwd")))
((stringp mh-alias-local-users)
(insert mh-alias-local-users "\n")
- (shell-command-on-region (point-min) (point-max) mh-alias-local-users t)
+ (shell-command-on-region (point-min) (point-max) mh-alias-local-users t t)
(goto-char (point-min))))
(while (< (point) (point-max))
(cond
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#14637: recent viper-mode regression
2013-06-18 20:25 ` Juri Linkov
@ 2013-06-19 0:28 ` Stefan Monnier
2013-06-19 20:53 ` Juri Linkov
0 siblings, 1 reply; 6+ messages in thread
From: Stefan Monnier @ 2013-06-19 0:28 UTC (permalink / raw)
To: 14637; +Cc: jim
> Grepping for `shell-command-on-region' revealed the exhaustive list
> of the callers that are fixed now with this patch to set both args
> OUTPUT-BUFFER and REPLACE to the same value in unison:
Do all the callers need to be fixed? Most of them? A minority only?
If it's not just a minority, then maybe the better fix is to revert
revno:112695 (or at least change it) so that existing code doesn't need
to be changed.
Stefan
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#14637: recent viper-mode regression
2013-06-19 0:28 ` Stefan Monnier
@ 2013-06-19 20:53 ` Juri Linkov
2013-06-20 2:02 ` Stefan Monnier
0 siblings, 1 reply; 6+ messages in thread
From: Juri Linkov @ 2013-06-19 20:53 UTC (permalink / raw)
To: Stefan Monnier; +Cc: 14637
>> Grepping for `shell-command-on-region' revealed the exhaustive list
>> of the callers that are fixed now with this patch to set both args
>> OUTPUT-BUFFER and REPLACE to the same value in unison:
>
> Do all the callers need to be fixed? Most of them? A minority only?
> If it's not just a minority, then maybe the better fix is to revert
> revno:112695 (or at least change it) so that existing code doesn't need
> to be changed.
I fixed all the callers that missed the required REPLACE arg:
5 were in vi mode, and 1 in mh-e. They are just a minority
out of total 25 occurrences of `shell-command-on-region'.
^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <handler.14637.D14637.13715874305307.notifdone@debbugs.gnu.org>]
end of thread, other threads:[~2013-06-20 2:02 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-06-16 22:59 bug#14637: recent viper-mode regression Jim Meyering
2013-06-18 20:25 ` Juri Linkov
2013-06-19 0:28 ` Stefan Monnier
2013-06-19 20:53 ` Juri Linkov
2013-06-20 2:02 ` Stefan Monnier
[not found] ` <handler.14637.D14637.13715874305307.notifdone@debbugs.gnu.org>
2013-06-19 8:56 ` bug#14637: closed (Re: bug#14637: recent viper-mode regression) Jim Meyering
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.