all messages for Emacs-related lists mirrored at yhetil.org
 help / color / mirror / code / Atom feed
* Dialling down symbol escaping slightly?
@ 2022-03-10  2:47 Lars Ingebrigtsen
  2022-03-10  5:50 ` [External] : " Drew Adams
  2022-03-10  6:46 ` Eli Zaretskii
  0 siblings, 2 replies; 7+ messages in thread
From: Lars Ingebrigtsen @ 2022-03-10  2:47 UTC (permalink / raw)
  To: emacs-devel

In a bug report, Drew pointed out that a function like

(defun foo. ())

got a *Help* buffer like:

---
foo\. is a Lisp closure.

(foo\.)
---

This is because we're using prin1 (as we should) here, and because the
printer always adds a backslash before the dot.  You also get the same
thing with a question mark, which is perhaps a more serious usability
problem, because quite a few people like to use that convention for
predicates:

---
foo\? is a Lisp closure.
---

This isn't only for *Help*, of course, but in any context where we
display a symbol, like in backtraces and the like, where "foo\?" is
confusing and therefore less than optimal.

Now, as far as I can tell, the only symbol containing a dot that needs
to be escaped is the `.' symbol.  That is, it needs to be printed as
\. to differentiate between that and the dot operator in `(1 . 2)'.  As
for the question mark, it apparently only needs to be quoted when it's
the first character in a symbol (to differentiate between the symbol and
the character syntax).

Does anybody see any problems with tweaking the printer to drop escaping
"." and "?" (except in the two cases described above)?

-- 
(domestic pets only, the antidote for overdose, milk.)
   bloggy blog: http://lars.ingebrigtsen.no




^ permalink raw reply	[flat|nested] 7+ messages in thread

* RE: [External] : Dialling down symbol escaping slightly?
  2022-03-10  2:47 Dialling down symbol escaping slightly? Lars Ingebrigtsen
@ 2022-03-10  5:50 ` Drew Adams
  2022-03-10  6:46 ` Eli Zaretskii
  1 sibling, 0 replies; 7+ messages in thread
From: Drew Adams @ 2022-03-10  5:50 UTC (permalink / raw)
  To: Lars Ingebrigtsen, emacs-devel@gnu.org

> In a bug report,

Please, refer to the bug report, where this was
presented and discussed.  It's bug #23130:

https://debbugs.gnu.org/cgi/bugreport.cgi?bug=23130

Go ahead, read the report; it's not long.
(You can ignore the rest of the bug thread
without missing anything.)

> Drew pointed out that a function like
> (defun foo. ()) got a *Help* buffer like:
> 
>   foo\. is a Lisp closure.
> 
>   (foo\.)

Also from the bug report:

 (defun bar\  () (message "BARRRR"))

 `C-h f'
 Describe function (default bar ): RET

   bar\ is a Lisp function.

   (bar\ )

 Note that the first line here is not even correct - it should at least
 have another SPC char after the `\ '.  The way it is written now, it
 suggests that the name is `bar\', i.e., that the symbol is bar\\.

The point of the report is that *Help* and prompts
should talk about a function or variable using the
same way the Emacs manual and help usually do: by
quoting its _name_: `foo.' (or curly quotes).

From the bug report:

 it would be better to show something like this:

   `foo.' is a Lisp function.

   (foo\.)

   `bar ' is a Lisp function.

   (bar\ )

 And it would be better to use `...' also in the prompt:

   Describe function (default `foo.'):
   Describe function (default `bar '):

(The same situation exists for other languages, BTW.)

We should talk about a function, variable, face,
... whatever has a name, by referring to its _name_.

Its name is unambiguous, and we don't need to use
Lisp reader syntax to talk about it in our help/doc.

There's a difference between _using_ a named thing,
as in Lisp read+eval, and _mentioning_ it, as in
help.  When mentioning a name we quote it.  That's
as old as the hills.  (For fun, read some Quine...)

In code, to use function `bar ' we use (bar\ ).
(When talking about that use we use `(bar\ )'.)

That's all this bug is about.  It shouldn't be a
big deal to fix.  There's _nothing_ complicated
going on here, at all.

> This is because we're using prin1 (as we should) here, and because the
> printer always adds a backslash before the dot.  You also get the same
> thing with a question mark, which is perhaps a more serious usability
> problem, because quite a few people like to use that convention for
> predicates:
...

and so on.

That all misses the point.  This is not about
_using_ functions or variables or... that have
such names.  It's about talking about them in
our doc/help/prompts.

(And yes, in interaction such as prompts, some
contexts might be exceptions - Lisp read syntax
might be appropriate.  Lisp is like that - using
it and talking about it almost at the same time.
We need not make a black-&-white thing of this.)

> foo\? is a Lisp closure.
> 
> This isn't only for *Help*, of course, but in any context where we
> display a symbol, like in backtraces and the like, where "foo\?" is
> confusing and therefore less than optimal.

Yes and no.

Yes, if it's a context where we're talking about
the thing and it's important that we humans
reading that might otherwise get confused.  If
we want to be sure to be clear in that case then
we can quote the name: `...'.

But no, we do _not_ need to do that "in any [i.e.
every] context where we display a symbol".  No.
Absolutely not.

If it's not so important in some context to be
super clear, and a human reader understands
that the text written there is something that
could be Lisp-read, then we need not necessarily
quote it.  Lisp-read syntax can sometimes be
handier, and even clearer.  In such contexts we
know to put on our little Lisp-reader hats and
read like Lisp...

But when it comes to doc/help talking about
things, we should in general quote their names.

And we already do that in our doc.  It's not an
accident that Emacs has always taken pains to
quote names in the doc.  We do it even for names
that are not problematic.  All the more reason
to do it for problematic ones (problematic for
us human readers) - e.g., names that start or
end with chars such as SPC.

All this bug is about is *Help* descriptions
and some prompts.  And only a tiny part of such
descriptions - in in general we already quote
names in *Help*.

The bug just points out a rare case where we've
neglected to do that.  It's a detail, a corner
case.  But it's worth fixing.

There's zero reason to make a big thing out of
this, and to start going on about Lisp sexp
printing, or reading, or closures...

This is only about improving user help a tiny
bit, by quoting function, var, and face names
in a few places where we've not done that yet.

> Now, as far as I can tell, the only symbol containing a dot that needs
> to be escaped is the `.' symbol.  That is, it needs to be printed as
> \. to differentiate between that and the dot operator in `(1 . 2)'.  As
> for the question mark, it apparently only needs to be quoted when it's
> the first character in a symbol (to differentiate between the symbol
> and the character syntax).
> 
> Does anybody see any problems with tweaking the printer to drop
> escaping "." and "?" (except in the two cases described above)?

That's all blah-blah, IMO.  No, this is not
about needing to tweak the printer for _any_
specific characters.  I'm afraid you may have
completely missed the point.

Let's just fix bug #23130 and then move along...



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Dialling down symbol escaping slightly?
  2022-03-10  2:47 Dialling down symbol escaping slightly? Lars Ingebrigtsen
  2022-03-10  5:50 ` [External] : " Drew Adams
@ 2022-03-10  6:46 ` Eli Zaretskii
  2022-03-10  6:50   ` Lars Ingebrigtsen
  1 sibling, 1 reply; 7+ messages in thread
From: Eli Zaretskii @ 2022-03-10  6:46 UTC (permalink / raw)
  To: Lars Ingebrigtsen; +Cc: emacs-devel

> From: Lars Ingebrigtsen <larsi@gnus.org>
> Date: Thu, 10 Mar 2022 03:47:18 +0100
> 
> Does anybody see any problems with tweaking the printer to drop escaping
> "." and "?" (except in the two cases described above)?

Wouldn't that also need a similar tweak to the Lisp reader?



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Dialling down symbol escaping slightly?
  2022-03-10  6:46 ` Eli Zaretskii
@ 2022-03-10  6:50   ` Lars Ingebrigtsen
  2022-03-10  6:53     ` Lars Ingebrigtsen
  0 siblings, 1 reply; 7+ messages in thread
From: Lars Ingebrigtsen @ 2022-03-10  6:50 UTC (permalink / raw)
  To: Eli Zaretskii; +Cc: emacs-devel

Eli Zaretskii <eliz@gnu.org> writes:

>> Does anybody see any problems with tweaking the printer to drop escaping
>> "." and "?" (except in the two cases described above)?
>
> Wouldn't that also need a similar tweak to the Lisp reader?

Nope.  The Lisp reader has no problems with unescaped "." and "?"
characters in symbols (except as described).

-- 
(domestic pets only, the antidote for overdose, milk.)
   bloggy blog: http://lars.ingebrigtsen.no



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Dialling down symbol escaping slightly?
  2022-03-10  6:50   ` Lars Ingebrigtsen
@ 2022-03-10  6:53     ` Lars Ingebrigtsen
  2022-03-11  3:44       ` Lars Ingebrigtsen
  0 siblings, 1 reply; 7+ messages in thread
From: Lars Ingebrigtsen @ 2022-03-10  6:53 UTC (permalink / raw)
  To: Eli Zaretskii; +Cc: emacs-devel

Lars Ingebrigtsen <larsi@gnus.org> writes:

>>> Does anybody see any problems with tweaking the printer to drop escaping
>>> "." and "?" (except in the two cases described above)?
>>
>> Wouldn't that also need a similar tweak to the Lisp reader?
>
> Nope.  The Lisp reader has no problems with unescaped "." and "?"
> characters in symbols (except as described).

Or rather -- that's what I was kind of asking -- whether doing what I
described would break the Lisp reader in any way.  I don't think so, but
there may be cases I'm not aware of.

-- 
(domestic pets only, the antidote for overdose, milk.)
   bloggy blog: http://lars.ingebrigtsen.no



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Dialling down symbol escaping slightly?
  2022-03-10  6:53     ` Lars Ingebrigtsen
@ 2022-03-11  3:44       ` Lars Ingebrigtsen
  2022-03-14  9:29         ` Lars Ingebrigtsen
  0 siblings, 1 reply; 7+ messages in thread
From: Lars Ingebrigtsen @ 2022-03-11  3:44 UTC (permalink / raw)
  To: Eli Zaretskii; +Cc: Stefan Monnier, emacs-devel

Lars Ingebrigtsen <larsi@gnus.org> writes:

> Or rather -- that's what I was kind of asking -- whether doing what I
> described would break the Lisp reader in any way.  I don't think so, but
> there may be cases I'm not aware of.

There was the `.?' case, so it's not just `.'.  So how about the
following -- it's more conservative than originally proposed, and leaves
open the possibility of introducing other future syntaxes starting with
a dot.

diff --git a/src/print.c b/src/print.c
index 8cce8a1ad8..3ede628b09 100644
--- a/src/print.c
+++ b/src/print.c
@@ -2180,6 +2180,11 @@ print_object (Lisp_Object obj, Lisp_Object printcharfun, bool escapeflag)
 			  && !NILP (string_to_number (p, 10, &len))
 			  && len == size_byte);
 
+	/* We don't escape "." or "?" (unless they're the first
+	   character in the symbol name).  */
+	if (*p == '?' || *p == '.')
+	  confusing = true;
+
 	if (! NILP (Vprint_gensym)
 	    && !SYMBOL_INTERNED_IN_INITIAL_OBARRAY_P (obj))
 	  print_c_string ("#:", printcharfun);
@@ -2201,8 +2206,8 @@ print_object (Lisp_Object obj, Lisp_Object printcharfun, bool escapeflag)
 	      {
 		if (c == '\"' || c == '\\' || c == '\''
 		    || c == ';' || c == '#' || c == '(' || c == ')'
-		    || c == ',' || c == '.' || c == '`'
-		    || c == '[' || c == ']' || c == '?' || c <= 040
+		    || c == ',' || c == '`'
+		    || c == '[' || c == ']' || c <= 040
 		    || c == NO_BREAK_SPACE
 		    || confusing)
 		  {

-- 
(domestic pets only, the antidote for overdose, milk.)
   bloggy blog: http://lars.ingebrigtsen.no



^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: Dialling down symbol escaping slightly?
  2022-03-11  3:44       ` Lars Ingebrigtsen
@ 2022-03-14  9:29         ` Lars Ingebrigtsen
  0 siblings, 0 replies; 7+ messages in thread
From: Lars Ingebrigtsen @ 2022-03-14  9:29 UTC (permalink / raw)
  To: Eli Zaretskii; +Cc: Stefan Monnier, emacs-devel

Lars Ingebrigtsen <larsi@gnus.org> writes:

> There was the `.?' case, so it's not just `.'.  So how about the
> following -- it's more conservative than originally proposed, and leaves
> open the possibility of introducing other future syntaxes starting with
> a dot.

I've now run with the patch a bit, and I don't see any regressions
(neither are there in the test suite), so I've now pushed it, and we'll
see how that goes...

-- 
(domestic pets only, the antidote for overdose, milk.)
   bloggy blog: http://lars.ingebrigtsen.no



^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2022-03-14  9:29 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-03-10  2:47 Dialling down symbol escaping slightly? Lars Ingebrigtsen
2022-03-10  5:50 ` [External] : " Drew Adams
2022-03-10  6:46 ` Eli Zaretskii
2022-03-10  6:50   ` Lars Ingebrigtsen
2022-03-10  6:53     ` Lars Ingebrigtsen
2022-03-11  3:44       ` Lars Ingebrigtsen
2022-03-14  9:29         ` Lars Ingebrigtsen

Code repositories for project(s) associated with this external index

	https://git.savannah.gnu.org/cgit/emacs.git
	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.