* table, columns and plot
@ 2016-01-26 10:20 flav
2016-01-26 17:17 ` Eric S Fraga
0 siblings, 1 reply; 5+ messages in thread
From: flav @ 2016-01-26 10:20 UTC (permalink / raw
To: emacs-orgmode
Hi !
I want to plot the extract of columns :
But, the gnuplot block do not found the tab1.
Is it possible to name the columnview table ?
Org-mode version 8.3.3 (8.3.3-17-gce80a0-elpa @
/home/flav/.emacs.d/elpa/org-20160118/)
Thks
* Synthèse
#+name: tab1
#+begin: columnview :hlines 1 :id "prj_encours"
| prj | Client | Acteurs | Début | Charges |
|-----+--------+---------+-------------------+---------|
| | | | | |
| p1 | c1 | a1, a2 | [2016-01-26 mar.] | 10 |
| p2 | c2 | a3 | [2017-01-02 lun.] | 12 |
#+end
#+begin_src gnuplot :var data=tab1 :file syn_prj.png
reset
# ZZset terminal png transparent truecolor
set grid
set style data histograms
set key top left outside horizontal autotitle columnhead
set style histogram cluster gap 1
set boxwidth 0.9 relative
set style fill solid 1.0 border -1
set xtics rotate by 30
set xtics offset 0,-1.0
plot data using 5:xticlabels(1)
#+end_src
#+RESULTS:
[[file:syn_prj.png]]
* prj en cours
:PROPERTIES:
:ID: prj_encours
:COLUMNS: %prj %Client %Acteurs %Début %Charges
:END:
** mig UIM
:PROPERTIES:
:prj: p1
:Client: c1
:Acteurs: a1, a2
:Début: [2016-01-26 mar.]
:Charges: 10
:END:
** D-Series
:PROPERTIES:
:prj: p2
:Client: c2
:Acteurs: a3
:Début: [2017-01-02 lun.]
:Charges: 12
:END:
* prj archives
--
flav
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: table, columns and plot
2016-01-26 10:20 table, columns and plot flav
@ 2016-01-26 17:17 ` Eric S Fraga
2016-01-27 6:58 ` flav
0 siblings, 1 reply; 5+ messages in thread
From: Eric S Fraga @ 2016-01-26 17:17 UTC (permalink / raw
To: flav; +Cc: emacs-orgmode
On Tuesday, 26 Jan 2016 at 11:20, flav@epita.fr wrote:
> Hi !
> I want to plot the extract of columns :
> But, the gnuplot block do not found the tab1.
> Is it possible to name the columnview table ?
>
> Org-mode version 8.3.3 (8.3.3-17-gce80a0-elpa @
> /home/flav/.emacs.d/elpa/org-20160118/)
>
> Thks
>
> * Synthèse
>
> #+name: tab1
> #+begin: columnview :hlines 1 :id "prj_encours"
What is this line meant to do? Without it, the gnuplot src block works
just fine.
--
: Eric S Fraga (0xFFFCF67D), Emacs 25.0.50.1, Org release_8.3.3-449-gd85ff3
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: table, columns and plot
2016-01-26 17:17 ` Eric S Fraga
@ 2016-01-27 6:58 ` flav
2016-01-27 10:26 ` Eric S Fraga
2016-01-27 10:27 ` Eric S Fraga
0 siblings, 2 replies; 5+ messages in thread
From: flav @ 2016-01-27 6:58 UTC (permalink / raw
To: emacs-orgmode
Eric S Fraga <e.fraga@ucl.ac.uk> writes:
> On Tuesday, 26 Jan 2016 at 11:20, flav@epita.fr wrote:
>> Hi !
>> I want to plot the extract of columns :
>> But, the gnuplot block do not found the tab1.
>> Is it possible to name the columnview table ?
>>
>> Org-mode version 8.3.3 (8.3.3-17-gce80a0-elpa @
>> /home/flav/.emacs.d/elpa/org-20160118/)
>>
>> Thks
>>
>> * Synthèse
>>
>> #+name: tab1
>> #+begin: columnview :hlines 1 :id "prj_encours"
>
> What is this line meant to do? Without it, the gnuplot src block works
> just fine.
#+begin: columnview :hlines 1 :id "prj_encours"
without this line "#+begin: columnview :hlines 1 :id "prj_encours", I
can't extract properties to make my table, isn't it ?
--
flav
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: table, columns and plot
2016-01-27 6:58 ` flav
@ 2016-01-27 10:26 ` Eric S Fraga
2016-01-27 10:27 ` Eric S Fraga
1 sibling, 0 replies; 5+ messages in thread
From: Eric S Fraga @ 2016-01-27 10:26 UTC (permalink / raw
To: flav; +Cc: emacs-orgmode
On Wednesday, 27 Jan 2016 at 07:58, flav@epita.fr wrote:
> Eric S Fraga <e.fraga@ucl.ac.uk> writes:
>
>> On Tuesday, 26 Jan 2016 at 11:20, flav@epita.fr wrote:
>>> Hi !
>>> I want to plot the extract of columns :
>>> But, the gnuplot block do not found the tab1.
>>> Is it possible to name the columnview table ?
>>>
>>> Org-mode version 8.3.3 (8.3.3-17-gce80a0-elpa @
>>> /home/flav/.emacs.d/elpa/org-20160118/)
>>>
>>> Thks
>>>
>>> * Synthèse
>>>
>>> #+name: tab1
>>> #+begin: columnview :hlines 1 :id "prj_encours"
>>
>> What is this line meant to do? Without it, the gnuplot src block works
>> just fine.
>
> #+begin: columnview :hlines 1 :id "prj_encours"
>
> without this line "#+begin: columnview :hlines 1 :id "prj_encours", I
> can't extract properties to make my table, isn't it ?
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: table, columns and plot
2016-01-27 6:58 ` flav
2016-01-27 10:26 ` Eric S Fraga
@ 2016-01-27 10:27 ` Eric S Fraga
1 sibling, 0 replies; 5+ messages in thread
From: Eric S Fraga @ 2016-01-27 10:27 UTC (permalink / raw
To: flav; +Cc: emacs-orgmode
On Wednesday, 27 Jan 2016 at 07:58, flav@epita.fr wrote:
> Eric S Fraga <e.fraga@ucl.ac.uk> writes:
[...]
>>> #+name: tab1
>>> #+begin: columnview :hlines 1 :id "prj_encours"
>>
>> What is this line meant to do? Without it, the gnuplot src block works
>> just fine.
>
> #+begin: columnview :hlines 1 :id "prj_encours"
>
> without this line "#+begin: columnview :hlines 1 :id "prj_encours", I
> can't extract properties to make my table, isn't it ?
Apologies for the previous reply which got sent before I had a chance to
type anything -- hit wrong key! <blush>
Anyway, I cannot help with this particular aspect as I have never tried
to extract properties from a table. I do not even know what that
means. :-)
Hope somebody else can help you.
--
: Eric S Fraga (0xFFFCF67D), Emacs 24.5.1, Org release_8.3.3-456-g164555
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-01-27 10:27 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-01-26 10:20 table, columns and plot flav
2016-01-26 17:17 ` Eric S Fraga
2016-01-27 6:58 ` flav
2016-01-27 10:26 ` Eric S Fraga
2016-01-27 10:27 ` Eric S Fraga
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.