* [PATCH 2/2] org-capture.el: Support all target file specifiction variants in Customize
@ 2016-05-11 22:13 Phil Hudson
2016-05-13 16:11 ` Nicolas Goaziou
0 siblings, 1 reply; 2+ messages in thread
From: Phil Hudson @ 2016-05-11 22:13 UTC (permalink / raw
To: emacs-orgmode
From 9ca987e6580ef633c961bf2023813d8544a0d36b Mon Sep 17 00:00:00 2001
From: Phil Hudson <phil.hudson@iname.com>
Date: Wed, 11 May 2016 22:49:01 +0100
Subject: [PATCH 2/2] org-capture.el: Support all target file specifiction
variants in Customize
* lisp/org-capture.el (`org-capture-templates'): Adjust the
`org-capture-templates' defcustom template to support specifying the capture
target file using either a literal pathname, a function, a variable or a
form, as documented. Previously the Customize UI supported specifying only a
literal pathname.
(org-capture-templates): Clarify the documentation for the 'function' method
for setting up the capture target.
* doc/org.texi (Template elements): Copy the clarification regarding 'function'
from org-capture.el above to the relevant section in the manual.
---
doc/org.texi | 4 ++--
lisp/org-capture.el | 58 +++++++++++++++++++++++++++++++++++++++++++----------
2 files changed, 49 insertions(+), 13 deletions(-)
diff --git a/doc/org.texi b/doc/org.texi
index 17b01c2..7a76744 100644
--- a/doc/org.texi
+++ b/doc/org.texi
@@ -7206,8 +7206,8 @@ A function to find the right location in the file.
File to the entry that is currently being clocked.
@item (function function-finding-location)
-Most general way, write your own function to find both
-file and location.
+Most general way: write your own function which both visits the
+file and sets point at the right location.
@end table
@item template
diff --git a/lisp/org-capture.el b/lisp/org-capture.el
index 34a6817..9842b13 100644
--- a/lisp/org-capture.el
+++ b/lisp/org-capture.el
@@ -166,8 +166,8 @@ target Specification of where the captured item should be placed.
File to the entry that is currently being clocked
(function function-finding-location)
- Most general way, write your own function to find both
- file and location
+ Most general way: write your own function which both visits the
+ file and sets point at the right location.
template The template for creating the capture item. If you leave this
empty, an appropriate default template will be used. See below
@@ -316,38 +316,74 @@ you can escape ambiguous cases with a backward slash, e.g., \\%i."
(choice :tag "Target location"
(list :tag "File"
(const :format "" file)
- (file :tag " File"))
+ (choice :tag " Filename"
+ (file :tag " Literal")
+ (function :tag " Function")
+ (variable :tag " Variable")
+ (sexp :tag " Form")))
(list :tag "ID"
(const :format "" id)
(string :tag " ID"))
(list :tag "File & Headline"
(const :format "" file+headline)
- (file :tag " File ")
+ (choice :tag " Filename"
+ (file :tag " Literal")
+ (function :tag " Function")
+ (variable :tag " Variable")
+ (sexp :tag " Form"))
(string :tag " Headline"))
(list :tag "File & Outline path"
(const :format "" file+olp)
- (file :tag " File ")
+ (choice :tag " Filename"
+ (file :tag " Literal")
+ (function :tag " Function")
+ (variable :tag " Variable")
+ (sexp :tag " Form"))
(repeat :tag "Outline path" :inline t
(string :tag "Headline")))
(list :tag "File & Regexp"
(const :format "" file+regexp)
- (file :tag " File ")
+ (choice :tag " Filename"
+ (file :tag " Literal")
+ (function :tag " Function")
+ (variable :tag " Variable")
+ (sexp :tag " Form"))
(regexp :tag " Regexp"))
(list :tag "File & Date tree"
(const :format "" file+datetree)
- (file :tag " File"))
+ (choice :tag " Filename"
+ (file :tag " Literal")
+ (function :tag " Function")
+ (variable :tag " Variable")
+ (sexp :tag " Form")))
(list :tag "File & Date tree, prompt for date"
(const :format "" file+datetree+prompt)
- (file :tag " File"))
+ (choice :tag " Filename"
+ (file :tag " Literal")
+ (function :tag " Function")
+ (variable :tag " Variable")
+ (sexp :tag " Form")))
(list :tag "File & Week tree"
(const :format "" file+weektree)
- (file :tag " File"))
+ (choice :tag " Filename"
+ (file :tag " Literal")
+ (function :tag " Function")
+ (variable :tag " Variable")
+ (sexp :tag " Form")))
(list :tag "File & Week tree, prompt for date"
(const :format "" file+weektree+prompt)
- (file :tag " File"))
+ (choice :tag " Filename"
+ (file :tag " Literal")
+ (function :tag " Function")
+ (variable :tag " Variable")
+ (sexp :tag " Form")))
(list :tag "File & function"
(const :format "" file+function)
- (file :tag " File ")
+ (choice :tag " Filename"
+ (file :tag " Literal")
+ (function :tag " Function")
+ (variable :tag " Variable")
+ (sexp :tag " Form"))
(sexp :tag " Function"))
(list :tag "Current clocking task"
(const :format "" clock))
--
2.8.0.rc3
--
Phil Hudson http://hudson-it.ddns.net
@UWascalWabbit PGP/GnuPG ID: 0x887DCA63
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH 2/2] org-capture.el: Support all target file specifiction variants in Customize
2016-05-11 22:13 [PATCH 2/2] org-capture.el: Support all target file specifiction variants in Customize Phil Hudson
@ 2016-05-13 16:11 ` Nicolas Goaziou
0 siblings, 0 replies; 2+ messages in thread
From: Nicolas Goaziou @ 2016-05-13 16:11 UTC (permalink / raw
To: Phil Hudson; +Cc: emacs-orgmode
Hello,
Phil Hudson <phil.hudson@iname.com> writes:
> From 9ca987e6580ef633c961bf2023813d8544a0d36b Mon Sep 17 00:00:00 2001
> From: Phil Hudson <phil.hudson@iname.com>
> Date: Wed, 11 May 2016 22:49:01 +0100
> Subject: [PATCH 2/2] org-capture.el: Support all target file specifiction
> variants in Customize
I cannot apply this patch. Could you rebase against maint and try
sending it again? Thank you.
> (const :format "" file)
> - (file :tag " File"))
> + (choice :tag " Filename"
> + (file :tag " Literal")
> + (function :tag " Function")
> + (variable :tag " Variable")
> + (sexp :tag " Form")))
I think you can remove all most of the redundancy using backquote, e.g.,
(let ((file-sources '(choice :tag " Filename"
(file :tag " Literal")
(function :tag " Function")
(variable :tag " Variable")
(sexp :tag " Form"))))
`(repeat
...
(choice :tag "Target location"
(const :format "" file)
,file-sources)
...))
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-05-13 16:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-05-11 22:13 [PATCH 2/2] org-capture.el: Support all target file specifiction variants in Customize Phil Hudson
2016-05-13 16:11 ` Nicolas Goaziou
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.