all messages for Emacs-related lists mirrored at yhetil.org
 help / color / mirror / code / Atom feed
* data-tests-logcount Failure
@ 2017-10-24 10:07 Colin Baxter
  2017-10-24 16:02 ` Paul Eggert
  0 siblings, 1 reply; 6+ messages in thread
From: Colin Baxter @ 2017-10-24 10:07 UTC (permalink / raw)
  To: emacs-devel

Hello,

I have an unexpected data-tests-logcount failure. The end of
src/data-tests.log reads:

Test data-tests-logcount condition:
    (wrong-type-argument integer-or-marker-p 1431655765.0)
   FAILED  26/30  data-tests-logcount
   passed  27/30  data-tests-max
   passed  28/30  data-tests-min
   passed  29/30  data-tests-varalias-watchers
   passed  30/30  data-tests-variable-watchers

Ran 30 tests, 29 results as expected, 1 unexpected (2017-10-24 10:56:32+0100)

1 unexpected results:
   FAILED  data-tests-logcount


I'm on 3.2.0-4-686-pae #1 SMP Debian 3.2.93-1 i686 GNU/Linux.

Colin.




^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: data-tests-logcount Failure
  2017-10-24 10:07 data-tests-logcount Failure Colin Baxter
@ 2017-10-24 16:02 ` Paul Eggert
  2017-10-24 17:43   ` Colin Baxter
  0 siblings, 1 reply; 6+ messages in thread
From: Paul Eggert @ 2017-10-24 16:02 UTC (permalink / raw)
  To: Colin Baxter; +Cc: Mark Oteiza, emacs-devel

On 10/24/2017 03:07 AM, Colin Baxter wrote:
> FAILED data-tests-logcount
What are the values of (logcount 9727) and (logcount 9999) on your 
platform? They should be 11 and 8, respectively.Are there more details 
about this in the file test/src/data-tests.log?

How did you invoke 'configure'? What is the output of 'gcc --version', 
and of 'cat /proc/cpuinfo'?

Can you run Emacs under GDB and put a breakpoint on the Flogcount 
function, and execute the above two Elisp calls while single-stepping 
through Flogcount, and also disassemble Flogcount? I did that on Fedora 
26 x86-64 on AMD Phenom II X4 910e, configured with 
'PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig:/usr/share/pkgconfig ./configure 
CC="/usr/bin/gcc -m32 -march=native -fsanitize=undefined 
-static-libubsan" --enable-gcc-warnings --without-imagemagick 
--with-modules', and got the following. What do you get when you try the 
same thing with your configuration?

     $ gdb bootstrap-emacs
     (gdb) source .gdbinit
     (gdb) b Flogcount
     (gdb) r -Q
     [In the *scratch* buffer, type "(logcount 9727) C-j".]
     Breakpoint 3, Flogcount (value=make_number(9727)) at data.c:3078
     (gdb) bt
     #0  Flogcount (value=make_number(9727)) at data.c:3078
     ...
     (gdb) disas
     Dump of assembler code for function Flogcount:
     => 0x08184080 <+0>:    sub    $0xc,%esp
        0x08184083 <+3>:    mov    0x14(%esp),%edx
        0x08184087 <+7>:    mov    0x10(%esp),%eax
        0x0818408b <+11>:    mov    %edx,%ecx
        0x0818408d <+13>:    and    $0x3,%ecx
        0x08184090 <+16>:    cmp    $0x2,%ecx
        0x08184093 <+19>:    jne    0x81840b2 <Flogcount+50>
        0x08184095 <+21>:    mov    %edx,%ecx
        0x08184097 <+23>:    sar    $0x1f,%edx
        0x0818409a <+26>:    sar    $0x2,%ecx
        0x0818409d <+29>:    xor    %edx,%ecx
        0x0818409f <+31>:    popcnt %ecx,%ecx
        0x081840a3 <+35>:    lea    0x2(,%ecx,4),%edx
        0x081840aa <+42>:    mov    %edx,(%eax)
        0x081840ac <+44>:    add    $0xc,%esp
        0x081840af <+47>:    ret    $0x4
        0x081840b2 <+50>:    push   %eax
        0x081840b3 <+51>:    push   %eax
        0x081840b4 <+52>:    push   %edx
        0x081840b5 <+53>:    push   $0x3b40
        0x081840ba <+58>:    call   0x8183020 <wrong_type_argument>
     End of assembler dump.
     (gdb) fin
     Run till exit from #0  Flogcount (value=make_number(9727)) at 
data.c:3078
     0x0819ceaf in eval_sub (form=...) at eval.c:2234
     Value returned is $1 = make_number(11)
     (gdb) cont
     Continuing.
     [In the *scratch* buffer, type "(logcount 9999) C-j".]

     Breakpoint 3, Flogcount (value=make_number(9999)) at data.c:3078
     (gdb) fin
     Run till exit from #0  Flogcount (value=make_number(9999)) at 
data.c:3078
     0x0819ceaf in eval_sub (form=...) at eval.c:2234
     Value returned is $2 = make_number(8)


My /proc/cpuinfo looks like this, repeated once for each core:

     processor    : 0
     vendor_id    : AuthenticAMD
     cpu family    : 16
     model        : 4
     model name    : AMD Phenom(tm) II X4 910e Processor
     stepping    : 3
     microcode    : 0x10000c8
     cpu MHz        : 2608.807
     cache size    : 512 KB
     physical id    : 0
     siblings    : 4
     core id        : 0
     cpu cores    : 4
     apicid        : 0
     initial apicid    : 0
     fpu        : yes
     fpu_exception    : yes
     cpuid level    : 5
     wp        : yes
     flags        : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge 
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext 
fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl 
nonstop_tsc cpuid extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy 
svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs 
skinit wdt hw_pstate vmmcall npt lbrv svm_lock nrip_save
     bugs        : tlb_mmatch apic_c1e fxsave_leak sysret_ss_attrs 
null_seg amd_e400
     bogomips    : 5217.61
     TLB size    : 1024 4K pages
     clflush size    : 64
     cache_alignment    : 64
     address sizes    : 48 bits physical, 48 bits virtual
     power management: ts ttp tm stc 100mhzsteps hwpstate




^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: data-tests-logcount Failure
  2017-10-24 16:02 ` Paul Eggert
@ 2017-10-24 17:43   ` Colin Baxter
  2017-10-24 18:02     ` Paul Eggert
  0 siblings, 1 reply; 6+ messages in thread
From: Colin Baxter @ 2017-10-24 17:43 UTC (permalink / raw)
  To: Paul Eggert; +Cc: Mark Oteiza, , emacs-devel

[-- Attachment #1: Type: text/plain, Size: 2252 bytes --]

>>>>> Paul Eggert <eggert@cs.ucla.edu> writes:

    > On 10/24/2017 03:07 AM, Colin Baxter wrote:
    >> FAILED data-tests-logcount
    > What are the values of (logcount 9727) and (logcount 9999) on your
    > platform? They should be 11 and 8, respectively.Are there more
    > details about this in the file test/src/data-tests.log?

    > How did you invoke 'configure'? What is the output of 'gcc
    > --version', and of 'cat /proc/cpuinfo'?

./configure --prefix=/home/redknight/local --with-mailutils

gcc-4.7.real (Debian 4.7.2-5) 4.7.2

cat /proc/cpuinfo gives:
========================

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 15
model		: 4
model name	: Intel(R) Pentium(R) 4 CPU 3.20GHz
stepping	: 3
microcode	: 0x5
cpu MHz		: 3192.426
cache size	: 2048 KB
physical id	: 0
siblings	: 2
core id		: 0
cpu cores	: 1
apicid		: 0
initial apicid	: 0
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pebs bts pni dtes64 monitor ds_cpl est cid cx16 xtpr
bogomips	: 6384.85
clflush size	: 64
cache_alignment	: 128
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 15
model		: 4
model name	: Intel(R) Pentium(R) 4 CPU 3.20GHz
stepping	: 3
microcode	: 0x5
cpu MHz		: 3192.426
cache size	: 2048 KB
physical id	: 0
siblings	: 2
core id		: 0
cpu cores	: 1
apicid		: 1
initial apicid	: 1
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pebs bts pni dtes64 monitor ds_cpl est cid cx16 xtpr
bogomips	: 6384.08
clflush size	: 64
cache_alignment	: 128
address sizes	: 36 bits physical, 48 bits virtual
power management:

    > Can you run Emacs under GDB and put a breakpoint on the Flogcount
    > function, and execute the above two Elisp calls while
    > single-stepping through Flogcount, and also disassemble Flogcount?

My gdb output is here:


[-- Attachment #2: gdb output --]
[-- Type: text/plain, Size: 12930 bytes --]

redknight@jetstar:~/git/emacs/src$ gdb bootstrap-emacs
GNU gdb (GDB) 7.4.1-debian
Copyright (C) 2012 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "i486-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /home/redknight/git/emacs/src/bootstrap-emacs...done.
SIGINT is used by the debugger.
Are you sure you want to change it? (y or n) [answered Y; input not from terminal]
DISPLAY = :0
TERM = dumb
Breakpoint 1 at 0x812e7a0: file emacs.c, line 363.
Temporary breakpoint 2 at 0x81476b0: file sysdep.c, line 1071.
(gdb) source .gdbinit
SIGINT is used by the debugger.
Are you sure you want to change it? (y or n) [answered Y; input not from terminal]
Redefine command "xgetptr"? (y or n) [answered Y; input not from terminal]
Redefine command "xgetint"? (y or n) [answered Y; input not from terminal]
Redefine command "xgettype"? (y or n) [answered Y; input not from terminal]
Redefine command "xgetsym"? (y or n) [answered Y; input not from terminal]
Redefine command "xsymname"? (y or n) [answered Y; input not from terminal]
Redefine command "pr"? (y or n) [answered Y; input not from terminal]
Redefine command "pp"? (y or n) [answered Y; input not from terminal]
Redefine command "pv"? (y or n) [answered Y; input not from terminal]
Redefine command "ppt"? (y or n) [answered Y; input not from terminal]
Redefine command "pitmethod"? (y or n) [answered Y; input not from terminal]
Redefine command "pitx"? (y or n) [answered Y; input not from terminal]
Redefine command "pit"? (y or n) [answered Y; input not from terminal]
Redefine command "prowx"? (y or n) [answered Y; input not from terminal]
Redefine command "prow"? (y or n) [answered Y; input not from terminal]
Redefine command "pcursorx"? (y or n) [answered Y; input not from terminal]
Redefine command "pcursor"? (y or n) [answered Y; input not from terminal]
Redefine command "pwinx"? (y or n) [answered Y; input not from terminal]
Redefine command "pwin"? (y or n) [answered Y; input not from terminal]
Redefine command "pbiditype"? (y or n) [answered Y; input not from terminal]
Redefine command "pgx"? (y or n) [answered Y; input not from terminal]
---Type <return> to continue, or q <return> to quit---
Redefine command "pg"? (y or n) [answered Y; input not from terminal]
Redefine command "pgi"? (y or n) [answered Y; input not from terminal]
Redefine command "pgn"? (y or n) [answered Y; input not from terminal]
Redefine command "pgrowx"? (y or n) [answered Y; input not from terminal]
Redefine command "pgrow"? (y or n) [answered Y; input not from terminal]
Redefine command "pgrowit"? (y or n) [answered Y; input not from terminal]
Redefine command "prowlims"? (y or n) [answered Y; input not from terminal]
Redefine command "pmtxrows"? (y or n) [answered Y; input not from terminal]
Redefine command "xtype"? (y or n) [answered Y; input not from terminal]
Redefine command "pvectype"? (y or n) [answered Y; input not from terminal]
Redefine command "xvectype"? (y or n) [answered Y; input not from terminal]
Redefine command "pvecsize"? (y or n) [answered Y; input not from terminal]
Redefine command "xvecsize"? (y or n) [answered Y; input not from terminal]
Redefine command "xmisctype"? (y or n) [answered Y; input not from terminal]
Redefine command "xint"? (y or n) [answered Y; input not from terminal]
Redefine command "xptr"? (y or n) [answered Y; input not from terminal]
Redefine command "xmarker"? (y or n) [answered Y; input not from terminal]
Redefine command "xoverlay"? (y or n) [answered Y; input not from terminal]
Redefine command "xmiscfree"? (y or n) [answered Y; input not from terminal]
Redefine command "xsymbol"? (y or n) [answered Y; input not from terminal]
Redefine command "xstring"? (y or n) [answered Y; input not from terminal]
Redefine command "xvector"? (y or n) [answered Y; input not from terminal]
Redefine command "xprocess"? (y or n) [answered Y; input not from terminal]
---Type <return> to continue, or q <return> to quit---
Redefine command "xframe"? (y or n) [answered Y; input not from terminal]
Redefine command "xcompiled"? (y or n) [answered Y; input not from terminal]
Redefine command "xwindow"? (y or n) [answered Y; input not from terminal]
Redefine command "xwinconfig"? (y or n) [answered Y; input not from terminal]
Redefine command "xsubr"? (y or n) [answered Y; input not from terminal]
Redefine command "xchartable"? (y or n) [answered Y; input not from terminal]
Redefine command "xsubchartable"? (y or n) [answered Y; input not from terminal]
Redefine command "xboolvector"? (y or n) [answered Y; input not from terminal]
Redefine command "xbuffer"? (y or n) [answered Y; input not from terminal]
Redefine command "xhashtable"? (y or n) [answered Y; input not from terminal]
Redefine command "xcons"? (y or n) [answered Y; input not from terminal]
Redefine command "nextcons"? (y or n) [answered Y; input not from terminal]
Redefine command "xcar"? (y or n) [answered Y; input not from terminal]
Redefine command "xcdr"? (y or n) [answered Y; input not from terminal]
Redefine command "xlist"? (y or n) [answered Y; input not from terminal]
Redefine command "xfloat"? (y or n) [answered Y; input not from terminal]
Redefine command "xscrollbar"? (y or n) [answered Y; input not from terminal]
Redefine command "xpr"? (y or n) [answered Y; input not from terminal]
Redefine command "xprintstr"? (y or n) [answered Y; input not from terminal]
Redefine command "xprintsym"? (y or n) [answered Y; input not from terminal]
Redefine command "xcoding"? (y or n) [answered Y; input not from terminal]
Redefine command "xcharset"? (y or n) [answered Y; input not from terminal]
---Type <return> to continue, or q <return> to quit---
Redefine command "xfontset"? (y or n) [answered Y; input not from terminal]
Redefine command "xfont"? (y or n) [answered Y; input not from terminal]
Redefine command "xbacktrace"? (y or n) [answered Y; input not from terminal]
Redefine command "xprintbytestr"? (y or n) [answered Y; input not from terminal]
Redefine command "xwhichsymbols"? (y or n) [answered Y; input not from terminal]
Redefine command "hookpost-backtrace"? (y or n) [answered Y; input not from terminal]
Redefine command "ff"? (y or n) [answered Y; input not from terminal]
DISPLAY = :0
TERM = dumb
Breakpoint 3 at 0x812e7a0: file emacs.c, line 363.
Temporary breakpoint 4 at 0x81476b0: file sysdep.c, line 1071.
(gdb) b Flogcount
Breakpoint 5 at 0x818bf10: file data.c, line 3078.
(gdb) r -Q
Starting program: /home/redknight/git/emacs/src/bootstrap-emacs -Q
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/i386-linux-gnu/i686/cmov/libthread_db.so.1".
[New Thread 0xb630ab70 (LWP 32328)]
[New Thread 0xb5bd1b70 (LWP 32329)]
[New Thread 0xb5657b70 (LWP 32330)]

Breakpoint 5, Flogcount (value=38910) at data.c:3078
3078	{
(gdb) bt
#0  Flogcount (value=38910) at data.c:3078
#1  0x081a1bdd in eval_sub (form=form@entry=143562403) at eval.c:2231
#2  0x081a4448 in Feval (form=143562403, lexical=0) at eval.c:2051
#3  0x081a24d4 in Ffuncall (nargs=nargs@entry=3, args=args@entry=0xbfffede4)
    at eval.c:2766
#4  0x081d7407 in exec_byte_code (bytestr=<optimized out>, vector=137612637,
    maxdepth=66, args_template=args_template@entry=1030, nargs=nargs@entry=1,
    args=<optimized out>, args@entry=0xbfffef5c) at bytecode.c:629
#5  0x081a21ff in funcall_lambda (fun=137612597, nargs=nargs@entry=1,
    arg_vector=arg_vector@entry=0xbfffef5c) at eval.c:2967
#6  0x081a2453 in Ffuncall (nargs=nargs@entry=2, args=args@entry=0xbfffef58)
    at eval.c:2780
#7  0x081d7407 in exec_byte_code (bytestr=<optimized out>, vector=137612973,
    maxdepth=18, args_template=args_template@entry=1030, nargs=nargs@entry=1,
    args=<optimized out>, args@entry=0xbffff0bc) at bytecode.c:629
#8  0x081a21ff in funcall_lambda (fun=137612925, nargs=nargs@entry=1,
    arg_vector=arg_vector@entry=0xbffff0bc) at eval.c:2967
#9  0x081a2453 in Ffuncall (nargs=nargs@entry=2, args=args@entry=0xbffff0b8)
    at eval.c:2780
#10 0x081d7407 in exec_byte_code (bytestr=<optimized out>, vector=137611573,
    maxdepth=14, args_template=args_template@entry=1026, nargs=nargs@entry=1,
    args=<optimized out>, args@entry=0xbffff278) at bytecode.c:629
#11 0x081a21ff in funcall_lambda (fun=137611525, nargs=nargs@entry=1,
---Type <return> to continue, or q <return> to quit---
    arg_vector=arg_vector@entry=0xbffff278) at eval.c:2967
#12 0x081a2453 in Ffuncall (nargs=nargs@entry=2, args=args@entry=0xbffff274)
    at eval.c:2780
#13 0x0819e8b4 in Ffuncall_interactively (nargs=2, args=0xbffff274)
    at callint.c:252
#14 0x081a24d4 in Ffuncall (nargs=nargs@entry=3, args=args@entry=0xbffff270)
    at eval.c:2766
#15 0x0819f2f1 in Fcall_interactively (function=4798944, record_flag=0,
    keys=139307989) at callint.c:841
#16 0x081a24d4 in Ffuncall (nargs=nargs@entry=4, args=args@entry=0xbffff3bc)
    at eval.c:2766
#17 0x081d7407 in exec_byte_code (bytestr=<optimized out>, vector=137301917,
    maxdepth=54, args_template=args_template@entry=4102, nargs=nargs@entry=1,
    args=<optimized out>, args@entry=0xbffff5bc) at bytecode.c:629
#18 0x081a21ff in funcall_lambda (fun=137301877, nargs=nargs@entry=1,
    arg_vector=arg_vector@entry=0xbffff5bc) at eval.c:2967
#19 0x081a2453 in Ffuncall (nargs=nargs@entry=2, args=args@entry=0xbffff5b8)
    at eval.c:2780
#20 0x081a28d7 in call1 (fn=fn@entry=8064, arg1=4798944) at eval.c:2617
#21 0x0813c7f3 in command_loop_1 () at keyboard.c:1482
#22 0x081a0e30 in internal_condition_case (
    bfun=bfun@entry=0x813c460 <command_loop_1>,
    handlers=handlers@entry=10536, hfun=hfun@entry=0x8132790 <cmd_error>)
---Type <return> to continue, or q <return> to quit---
    at eval.c:1332
#23 0x081316a4 in command_loop_2 (ignore=ignore@entry=0) at keyboard.c:1110
#24 0x081a0ebd in internal_catch (tag=tag@entry=25488,
    func=func@entry=0x8131680 <command_loop_2>, arg=arg@entry=0)
    at eval.c:1097
#25 0x08131661 in command_loop () at keyboard.c:1089
#26 0x081323b3 in recursive_edit_1 () at keyboard.c:695
#27 0x081326b4 in Frecursive_edit () at keyboard.c:766
#28 0x0805c513 in main (argc=2, argv=0xbffff914) at emacs.c:1713

Lisp Backtrace:
"logcount" (0xbfffed00)
"eval" (0xbfffede8)
"elisp--eval-last-sexp" (0xbfffef5c)
"eval-last-sexp" (0xbffff0bc)
"eval-print-last-sexp" (0xbffff278)
"funcall-interactively" (0xbffff274)
"call-interactively" (0xbffff3c0)
"command-execute" (0xbffff5bc)
(gdb) disas
Dump of assembler code for function Flogcount:
=> 0x0818bf10 <+0>:	sub    $0x1c,%esp
   0x0818bf13 <+3>:	mov    0x20(%esp),%eax
   0x0818bf17 <+7>:	mov    %eax,%edx
   0x0818bf19 <+9>:	and    $0x3,%edx
   0x0818bf1c <+12>:	cmp    $0x2,%edx
   0x0818bf1f <+15>:	jne    0x818bf3e <Flogcount+46>
   0x0818bf21 <+17>:	mov    %eax,%edx
   0x0818bf23 <+19>:	sar    $0x2,%edx
   0x0818bf26 <+22>:	sar    $0x1f,%eax
   0x0818bf29 <+25>:	xor    %eax,%edx
   0x0818bf2b <+27>:	mov    %edx,(%esp)
   0x0818bf2e <+30>:	call   0x822ede0 <__popcountsi2>
   0x0818bf33 <+35>:	add    $0x1c,%esp
   0x0818bf36 <+38>:	lea    0x2(,%eax,4),%eax
   0x0818bf3d <+45>:	ret
   0x0818bf3e <+46>:	mov    %eax,0x4(%esp)
   0x0818bf42 <+50>:	movl   $0x3c00,(%esp)
   0x0818bf49 <+57>:	call   0x818bcb0 <wrong_type_argument>
End of assembler dump.
(gdb) fin
Dump of assembler code for function Flogcount:
=> 0x0818bf10 <+0>:	sub    $0x1c,%esp
   0x0818bf13 <+3>:	mov    0x20(%esp),%eax
   0x0818bf17 <+7>:	mov    %eax,%edx
   0x0818bf19 <+9>:	and    $0x3,%edx
   0x0818bf1c <+12>:	cmp    $0x2,%edx
   0x0818bf1f <+15>:	jne    0x818bf3e <Flogcount+46>
   0x0818bf21 <+17>:	mov    %eax,%edx
   0x0818bf23 <+19>:	sar    $0x2,%edx
   0x0818bf26 <+22>:	sar    $0x1f,%eax
   0x0818bf29 <+25>:	xor    %eax,%edx
   0x0818bf2b <+27>:	mov    %edx,(%esp)
   0x0818bf2e <+30>:	call   0x822ede0 <__popcountsi2>
   0x0818bf33 <+35>:	add    $0x1c,%esp
   0x0818bf36 <+38>:	lea    0x2(,%eax,4),%eax
   0x0818bf3d <+45>:	ret
   0x0818bf3e <+46>:	mov    %eax,0x4(%esp)
   0x0818bf42 <+50>:	movl   $0x3c00,(%esp)
   0x0818bf49 <+57>:	call   0x818bcb0 <wrong_type_argument>
End of assembler dump.
(gdb) fin
Run till exit from #0  Flogcount (value=38910) at data.c:3078
0x081a1bdd in eval_sub (form=form@entry=143562403) at eval.c:2231
2231                  val = (XSUBR (fun)->function.a1 (argvals[0]));
Value returned is $1 = 46
(gdb) cont
Continuing.

Breakpoint 5, Flogcount (value=39998) at data.c:3078
3078	{
(gdb) fin
Run till exit from #0  Flogcount (value=39998) at data.c:3078
0x081a1bdd in eval_sub (form=form@entry=143591699) at eval.c:2231
2231                  val = (XSUBR (fun)->function.a1 (argvals[0]));
Value returned is $2 = 34
(gdb)

[-- Attachment #3: Type: text/plain, Size: 226 bytes --]


---------- Snip ------------

    >Value returned is $2 = make_number(8)

I get "Value returned is $2 = 34".

I'm sort of at the extreme limit my IT understanding level, so I may
have messed up - sorry.

Best wishes,

Colin.

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: data-tests-logcount Failure
  2017-10-24 17:43   ` Colin Baxter
@ 2017-10-24 18:02     ` Paul Eggert
  2017-10-24 19:01       ` Colin Baxter
  0 siblings, 1 reply; 6+ messages in thread
From: Paul Eggert @ 2017-10-24 18:02 UTC (permalink / raw)
  To: Colin Baxter; +Cc: Mark Oteiza, emacs-devel

On 10/24/2017 10:43 AM, Colin Baxter wrote:
> 2231                  val = (XSUBR (fun)->function.a1 (argvals[0]));
> Value returned is $1 = 46
> (gdb) cont
> Continuing.
>
> Breakpoint 5, Flogcount (value=39998) at data.c:3078
> 3078	{
> (gdb) fin
> Run till exit from #0  Flogcount (value=39998) at data.c:3078
> 0x081a1bdd in eval_sub (form=form@entry=143591699) at eval.c:2231
> 2231                  val = (XSUBR (fun)->function.a1 (argvals[0]));
> Value returned is $2 = 34

These are the correct values: 46 is the Emacs representation for 11, and 
34 is the Emacs representation for 8. So I'm puzzled as to why the tests 
failed.

What is in test/data/data-tests.log?

What is the output of the following shell command?

src/emacs -Q -batch -eval '(message "%S %S" (logcount 9727) (logcount 
9999))'

It should be "11 8".




^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: data-tests-logcount Failure
  2017-10-24 18:02     ` Paul Eggert
@ 2017-10-24 19:01       ` Colin Baxter
  2017-10-24 19:17         ` Paul Eggert
  0 siblings, 1 reply; 6+ messages in thread
From: Colin Baxter @ 2017-10-24 19:01 UTC (permalink / raw)
  To: Paul Eggert; +Cc: Mark Oteiza, , emacs-devel

[-- Attachment #1: Type: text/plain, Size: 787 bytes --]

>>>>> Paul Eggert <eggert@cs.ucla.edu> writes:

    > On 10/24/2017 10:43 AM, Colin Baxter wrote:
    >> 2231 val = (XSUBR (fun)->function.a1 (argvals[0])); Value
    >> returned is $1 = 46 (gdb) cont Continuing.
    >> 
    >> Breakpoint 5, Flogcount (value=39998) at data.c:3078 3078 { (gdb)
    >> fin Run till exit from #0 Flogcount (value=39998) at data.c:3078
    >> 0x081a1bdd in eval_sub (form=form@entry=143591699) at eval.c:2231
    >> 2231 val = (XSUBR (fun)->function.a1 (argvals[0])); Value
    >> returned is $2 = 34

    > These are the correct values: 46 is the Emacs representation for
    > 11, and 34 is the Emacs representation for 8. So I'm puzzled as to
    > why the tests failed.

    > What is in test/data/data-tests.log?

Do you mean test/src/data-tests.log?


[-- Attachment #2: /home/redknight/git/emacs/test/src/data-tests.log --]
[-- Type: message/external-body, Size: 115 bytes --]

[-- Attachment #3: Type: text/plain, Size: 193 bytes --]


    > What is the output of the following shell command?

    > src/emacs -Q -batch -eval '(message "%S %S" (logcount 9727)
    > (logcount 9999))'

    > It should be "11 8".

It is.

Colin.

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: data-tests-logcount Failure
  2017-10-24 19:01       ` Colin Baxter
@ 2017-10-24 19:17         ` Paul Eggert
  0 siblings, 0 replies; 6+ messages in thread
From: Paul Eggert @ 2017-10-24 19:17 UTC (permalink / raw)
  To: Colin Baxter; +Cc: Mark Oteiza, emacs-devel

On 10/24/2017 12:01 PM, Colin Baxter wrote:
> Do you mean test/src/data-tests.log?

Yes.




^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2017-10-24 19:17 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-10-24 10:07 data-tests-logcount Failure Colin Baxter
2017-10-24 16:02 ` Paul Eggert
2017-10-24 17:43   ` Colin Baxter
2017-10-24 18:02     ` Paul Eggert
2017-10-24 19:01       ` Colin Baxter
2017-10-24 19:17         ` Paul Eggert

Code repositories for project(s) associated with this external index

	https://git.savannah.gnu.org/cgit/emacs.git
	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.