error on opening org-file with #+startup: indent

error on opening org-file with #+startup: indent

[fkunze]

Hi All,
  I just upgraded to Org 7.8.09 from Org 6.36.  I am on windows 7 (x64) with GNU 
Emacs 24.1.50.1 (i386-mingw-nt6.1.7601).

  When I open an org file with  #+startup: indent in the header, the cursor 
immediately goes to the bottom of the buffer and can not be moved upward.

  Here is a file (test.org) demonstrating the problem:
---- start of file ----
#+TITLE: Test.org
#+startup: indent






end of buffer
---- end of file ----

This behavior does not occur in Org 6.36.

Thanks,
fkunze

Re: error on opening org-file with #+startup: indent

[Bastien]

fkunze <fkunze@gmail.com> writes:

>   When I open an org file with  #+startup: indent in the header, the cursor 
> immediately goes to the bottom of the buffer and can not be moved upward.

I can't reproduce this error...

> This behavior does not occur in Org 6.36.

... and that's surely why.

Please update to a more recent version of Org, if possible.

Thanks,

-- 
 Bastien

Re: error on opening org-file with #+startup: indent

[Mike McLean]

On Apr 23, 2012, at 7:15 PM, Bastien wrote:

> fkunze <fkunze@gmail.com> writes:
> 
>>  When I open an org file with  #+startup: indent in the header, the cursor 
>> immediately goes to the bottom of the buffer and can not be moved upward.
> 
> I can't reproduce this error...
> 
>> This behavior does not occur in Org 6.36.
> 
> ... and that's surely why.

Actually he/she said that he had just upgraded to Org 7.8.09 (the test on 6.36 was his/her regression test) -- so I don't think the absolute version of Org is the problem. 

Fkunze - I am suspecting that you have mis-matched org-mode installs, i.e. pieces and parts of both. What does =M-x org-version= say when you are experiencing the problem?

Can you completely clean/remove the old Org 6.36 version to ensure no conflict?

Re: error on opening org-file with #+startup: indent

[Bastien]

Mike McLean <mike.mclean@pobox.com> writes:

> On Apr 23, 2012, at 7:15 PM, Bastien wrote:
>
>> fkunze <fkunze@gmail.com> writes:
>> 
>>>  When I open an org file with  #+startup: indent in the header, the cursor 
>>> immediately goes to the bottom of the buffer and can not be moved upward.
>> 
>> I can't reproduce this error...
>> 
>>> This behavior does not occur in Org 6.36.
>> 
>> ... and that's surely why.
>
> Actually he/she said that he had just upgraded to Org 7.8.09 (the test on
> 6.36 was his/her regression test) -- so I don't think the absolute version
> of Org is the problem.

You're right of course.  Sorry for the noise and thanks for the
clarification. 

-- 
 Bastien

Re: error on opening org-file with #+startup: indent

[Fritz Kunze]

[-- Attachment #1: Type: text/plain, Size: 2525 bytes --]

Hi Guys,
  Thanks for trying to help  me with this.

   I re-did the installation:

     I ran M-x load-library org followed by M-x org-version - which
returned 7.8.09.
          (Incidentally, and for the sake of completeness in this report, I
built the compiled version of this upgrade by using

            M-x cd ~/.emacs.d/org-7.8.09/ followed by C-u 0 M-x
byte-recompile-directory)

     I renamed the org-6.36 folder. I started up emacs and the error still
appeared.

     Prior to the attempted upgrade, my load-path contained:
           (add-to-list 'load-path "~/.emacs.d/org-6.36/lisp")
           (add-to-list 'load-path "~/.emacs.d/org-6.36/contrib/lisp")

      And after the attempted upgrade my load-path contained:
           (add-to-list 'load-path "~/.emacs.d/org-7.8.09/lisp")
           (add-to-list 'load-path "~/.emacs.d/org-7.8.09/contrib/lisp")

As an experiment, I modified the load-path to consist only of one statement:
     (add-to-list 'load-path "~/.emacs.d/org-7.8.09/")
     ; (add-to-list 'load-path "~/.emacs.d/org-7.8.09/contrib/lisp")
And suddenly the "bug" vanished.  What's going on - do you have any idea?
 I thought I would certainly need this
directory "~/.emacs.d/org-7.8.09/contrib/lisp" in my load-path.

I also tried some of the steps listed in:
http://orgmode.org/worg/org-contrib/org-track.html    but when I execute
the command (listed there): M-x customize-variable RET org-track-directory
RET, I get the message [No Match] - so there apparently is not
org-track-directory variable (at least on windows)

Any ideas? Thanks in advance for your help.

-Fritz Kunze

On Tue, Apr 24, 2012 at 4:45 AM, Mike McLean <mike.mclean@pobox.com> wrote:

>
> On Apr 23, 2012, at 7:15 PM, Bastien wrote:
>
> > fkunze <fkunze@gmail.com> writes:
> >
> >>  When I open an org file with  #+startup: indent in the header, the
> cursor
> >> immediately goes to the bottom of the buffer and can not be moved
> upward.
> >
> > I can't reproduce this error...
> >
> >> This behavior does not occur in Org 6.36.
> >
> > ... and that's surely why.
>
> Actually he/she said that he had just upgraded to Org 7.8.09 (the test on
> 6.36 was his/her regression test) -- so I don't think the absolute version
> of Org is the problem.
>
> Fkunze - I am suspecting that you have mis-matched org-mode installs, i.e.
> pieces and parts of both. What does =M-x org-version= say when you are
> experiencing the problem?
>
> Can you completely clean/remove the old Org 6.36 version to ensure no
> conflict?
>
>
>

[-- Attachment #2: Type: text/html, Size: 4387 bytes --]

Re: error on opening org-file with #+startup: indent

[Achim Gratz]

Fritz Kunze writes:
>      I ran M-x load-library org followed by M-x org-version - which
> returned 7.8.09. 

You didn't generate and (require 'org-install).

>           (Incidentally, and for the sake of completeness in this
> report, I built the compiled version of this upgrade by using 
>
>             M-x cd ~/.emacs.d/org-7.8.09/ followed by C-u 0 M-x
> byte-recompile-directory)

You still don't have org-install.el

>      I renamed the org-6.36 folder. I started up emacs and the error
> still appeared. 

You do not have org-install.el and you are picking up outdated autoload
definitions from your emacs installation.

> As an experiment, I modified the load-path to consist only of one
> statement:
>      (add-to-list 'load-path "~/.emacs.d/org-7.8.09/")
>      ; (add-to-list 'load-path "~/.emacs.d/org-7.8.09/contrib/lisp")
> And suddenly the "bug" vanished.  What's going on - do you have any
> idea?  I thought I would certainly need this
> directory "~/.emacs.d/org-7.8.09/contrib/lisp" in my load-path.

Fix the installation first and then worry about things in contrib/.


Regards,
Achim.
-- 
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+

SD adaptation for Waldorf rackAttack V1.04R1:
http://Synth.Stromeko.net/Downloads.html#WaldorfSDada

Re: error on opening org-file with #+startup: indent

[Martyn Jago]

Hi Achim

Achim Gratz <Stromeko@nexgo.de> writes:

> Fritz Kunze writes:
>>      I ran M-x load-library org followed by M-x org-version - which
>> returned 7.8.09. 
>
> You didn't generate and (require 'org-install).
>
>>           (Incidentally, and for the sake of completeness in this
>> report, I built the compiled version of this upgrade by using 
>>
>>             M-x cd ~/.emacs.d/org-7.8.09/ followed by C-u 0 M-x
>> byte-recompile-directory)
>
> You still don't have org-install.el
>

I think this tone of reply is very harsh, and I feel for the OP. Has it
suddenly become a requirement to know emacs-lisp, and have a reasonable
understanding of `autoload' to even install?

A very formal announcement and good documentation would perhaps have been a
good idea. Don't get me wrong - I like the new makefile, but there *is*
now magic that there never was, without question. 

I think it would be better to refer to some good documentation rather
than short terse admonishment over something that `used to work'.

My 2c.

Best, Martyn

>>      I renamed the org-6.36 folder. I started up emacs and the error
>> still appeared. 
>
> You do not have org-install.el and you are picking up outdated autoload
> definitions from your emacs installation.
>
>> As an experiment, I modified the load-path to consist only of one
>> statement:
>>      (add-to-list 'load-path "~/.emacs.d/org-7.8.09/")
>>      ; (add-to-list 'load-path "~/.emacs.d/org-7.8.09/contrib/lisp")
>> And suddenly the "bug" vanished.  What's going on - do you have any
>> idea?  I thought I would certainly need this
>> directory "~/.emacs.d/org-7.8.09/contrib/lisp" in my load-path.
>
> Fix the installation first and then worry about things in contrib/.
>
>
> Regards,
> Achim.

Re: error on opening org-file with #+startup: indent

[Mike McLean]

[-- Attachment #1: Type: text/plain, Size: 1484 bytes --]


On Apr 24, 2012, at 3:18 PM, Achim Gratz wrote:

> Fritz Kunze writes:
>>      I ran M-x load-library org followed by M-x org-version - which
>> returned 7.8.09. 
> 
> You didn't generate and (require 'org-install).

If you have admin-rights / sudo access on your machine, the simplest method may be to just follow the true install process at http://orgmode.org/manual/Installation.html#Installation. Any reasonably setup Linux/Unix system will require sudo / root access for the make install step. 

If you are going to run Org-Mode without running “make install” (or don't have the proper rights to run “make install”), the build process has recently changed. This is likely why you are picking up the old autoloads. Instead of = M-x cd ~/.emacs.d/org-7.8.09/ followed by C-u 0 M-x byte-recompile-directory)= do the following from your shell:

$ cd ~/.emacs.d/org-7.8.09/
$ make oldorg

Back in Emacs:

(add-to-list 'load-path "~/.emacs.d/org-7.8.09/lisp")
(require 'org-install)
Then immediately do a

M-x org-version

If you don't get a string similar to mine below, you still have conflicting versions of Org Mode. In particular you are looking for the part after the '@' sign to point to an org-install.el that matches your ~/.emacs.d/org-7.8.09/lisp directory location. Without it, Emacs and Org will be hopelessly confused.

=Org-mode version 7.8.09 (release_7.8.09-335-geabf89 @ /Users/mlm/.emacs.d/el-get/org-mode/lisp/org-install.el)=

Mike


[-- Attachment #2: Type: text/html, Size: 2180 bytes --]

Re: error on opening org-file with #+startup: indent

[Achim Gratz]

Martyn Jago writes:
> I think this tone of reply is very harsh, and I feel for the OP.

I certainly did not mean to offend anyone.

> Has it suddenly become a requirement to know emacs-lisp, and have a
> reasonable understanding of `autoload' to even install?

No, but 

> A very formal announcement and good documentation would perhaps have been a
> good idea. Don't get me wrong - I like the new makefile, but there *is*
> now magic that there never was, without question. 

An announcement will surely be made by Bastien when the next release is
made and the documentation should be ready by then.

This problem has nothing to do with the new Makefile, it didn't even
enter the picture (remember this change isn't on 7.8.09 and the OP
didn't use make at all).  The reason that the setup the OP described
worked before is that the versions used by his Emacs (likely 6.33x) and
the new Org he installed (6.36) were sufficiently similar.

> I think it would be better to refer to some good documentation rather
> than short terse admonishment over something that `used to work'.

The documentation on orgmode.org does describe what to do when switching
from Emacs' org version to a newer one.  If you follow those
instructions step-by-step, everything will work.

http://orgmode.org/manual/Installation.html#Installation


Regards,
Achim.
-- 
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+

Factory and User Sound Singles for Waldorf rackAttack:
http://Synth.Stromeko.net/Downloads.html#WaldorfSounds

Re: error on opening org-file with #+startup: indent

[Achim Gratz]

Achim Gratz writes:
>> Has it suddenly become a requirement to know emacs-lisp, and have a
>> reasonable understanding of `autoload' to even install?
>
> No, but 

Something obviously got cut out before I sent this... it should read:

No, but I've been in the same situation as to OP some time ago and it
took me months to drill to the bottom of some mysterious (at the time)
and seemingly random errors.  Even a single-word answer would have saved
me quite some time.


Regards,
Achim.
-- 
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+

Factory and User Sound Singles for Waldorf Blofeld:
http://Synth.Stromeko.net/Downloads.html#WaldorfSounds

Re: error on opening org-file with #+startup: indent

[fkunze]

Achim Gratz <Stromeko <at> nexgo.de> writes:

> 
> Fritz Kunze writes:
> >      I ran M-x load-library org followed by M-x org-version - which
> > returned 7.8.09. 
> 
> You didn't generate and (require 'org-install).
> 
> >           (Incidentally, and for the sake of completeness in this
> > report, I built the compiled version of this upgrade by using 
> >
> >             M-x cd ~/.emacs.d/org-7.8.09/ followed by C-u 0 M-x
> > byte-recompile-directory)
> 
> You still don't have org-install.el
> 
> >      I renamed the org-6.36 folder. I started up emacs and the error
> > still appeared. 
> 
> You do not have org-install.el and you are picking up outdated autoload
> definitions from your emacs installation.
> 
> > As an experiment, I modified the load-path to consist only of one
> > statement:
> >      (add-to-list 'load-path "~/.emacs.d/org-7.8.09/")
> >      ; (add-to-list 'load-path "~/.emacs.d/org-7.8.09/contrib/lisp")
> > And suddenly the "bug" vanished.  What's going on - do you have any
> > idea?  I thought I would certainly need this
> > directory "~/.emacs.d/org-7.8.09/contrib/lisp" in my load-path.
> 
> Fix the installation first and then worry about things in contrib/.
> 
> Regards,
> Achim.
Hi Achim,
  I managed to fix my installation (at least so far) with the addition of 

(require 'org-install)

Thanks for your comments as they led me to try this solution.  One question: 
when you wrote "outdated autoload definitions" did you mean that I should be 
using some other form to specify the load path (I was loading from 
(add-to-list 'load-path "~/.emacs.d/org-7.8.09/") rather than from (add-to-list 
'load-path "~/.emacs.d/org-6.36/lisp")?

  Regarding the installation instructions: At first I started here 
(http://orgmode.org/manual/Installation.html#Installation) but since I am 
running on windows 7, I have no access to "Make".  I want to avoid installing 
cywin as it typically fails to track windows 7 x64.  As far as I can tell, make 
is unnecessary as well since you can hand compile all the files (as I described 
in my bug report). It's my mistake that I failed to notice the requirement to 
add (require 'org-install).

  Here's a suggestion that might help others who encounter similar problems:  
Augment the installation description 
(http://orgmode.org/manual/Installation.html#Installation) with a short 
description for windows users (that avoids the use of make).

Re: error on opening org-file with #+startup: indent

[fkunze]

Martyn Jago <martyn.jago <at> btinternet.com> writes:

Hi Martyn,
Thanks for your support on this issue.  I appreciate it.  The main issue for me 
seems to be the paucity of window's specific documentation.  I understand that 
most people are linux users on this list.  

Re: error on opening org-file with #+startup: indent

[fkunze]

Mike McLean <mike.mclean <at> pobox.com> writes:

> 
> 
> 
> On Apr 24, 2012, at 3:18 PM, Achim Gratz wrote:
> Fritz Kunze writes:     I ran M-x load-library org followed by M-x org-version 
- which
> 
> returned 7.8.09. 
> 
> You didn't generate and (require 'org-install).
> 
> 
> If you have admin-rights / sudo access on your machine, the simplest method 
may be to just follow the true install process 
at http://orgmode.org/manual/Installation.html#Installation. Any reasonably 
setup Linux/Unix system will require sudo / root access for the make install 
step. 
> 
> If you are going to run Org-Mode without running “make install” (or don't have 
the proper rights to run “make install”), the build process has recently 
changed. This is likely why you are picking up the old autoloads. Instead of 
= M-x cd ~/.emacs.d/org-7.8.09/ followed by C-u 0 M-x byte-recompile-directory)= 
do the following from your shell:
> 
> $ cd ~/.emacs.d/org-7.8.09/
> $ make oldorg
> 
> Back in Emacs:
> 
> (add-to-list 'load-path "~/.emacs.d/org-7.8.09/lisp")
> (require 'org-install)
> Then immediately do a
> 
> M-x org-version
> 
> If you don't get a string similar to mine below, you still have conflicting 
versions of Org Mode. In particular you are looking for the part after the ' 
<at> ' sign to point to an org-install.el that matches your ~/.emacs.d/org-
7.8.09/lisp directory location. Without it, Emacs and Org will be hopelessly 
confused.
> 
> 
> =Org-mode version 7.8.09 (release_7.8.09-335-geabf89  <at>  
/Users/mlm/.emacs.d/el-get/org-mode/lisp/org-install.el)=
> 
> Mike
> 
> 
> 
> 
Hi Mike,
  Thanks for your comments.  Combining what you wrote with what Achim wrote I 
was able to get my upgraded installation (org-7.8.90) to work as it once did in 
org-6.36 (at least so far).  

  I am unable to generate something similar to what you wrote that appears after 
the <at> sign - (you got something that included a path (~/.emacs.d/org-
7.8.09/lisp directory location)), all I get is the string org-7.8.09.  Is the 
path stashed away in some customization variable that I can examine?

  If I don't have access to Make and I hand compiled the code, should I continue 
to expect to encounter other types of problems?

  At the risk of being redundant (as I separately replied to Achim) - Regarding 
the installation instructions: At first I started here 
(http://orgmode.org/manual/Installation.html#Installation) but since I am 
running on windows 7, I have no access to "Make".  I want to avoid installing 
cywin as it typically fails to track windows 7 x64.  As far as I can tell, make 
is unnecessary as well since you can hand compile all the files (as I described 
in my bug report). It's my mistake that I failed to notice the requirement to 
add (require 'org-install).

  Here's a suggestion that might help others who encounter similar problems:  
Augment the installation description 
(http://orgmode.org/manual/Installation.html#Installation) with a short 
description for windows users (that avoids the use of make).

Re: error on opening org-file with #+startup: indent

[Achim Gratz]

fkunze writes:
>   Regarding the installation instructions: At first I started here 
> (http://orgmode.org/manual/Installation.html#Installation) but since I am 
> running on windows 7, I have no access to "Make".  I want to avoid installing 
> cywin as it typically fails to track windows 7 x64.  As far as I can tell, make 
> is unnecessary as well since you can hand compile all the files (as I described 
> in my bug report). It's my mistake that I failed to notice the requirement to 
> add (require 'org-install).

The make from MSys would also work.  Again, it is not the (missing or
not) byte-compilation that is the problem.

I plan to provide a way to generate the autoloads without make, maybe
even automatically when they are determined to be missing.  Until then
you'd have to do this by hand; start emacs (preferrably with options
"--no-init -Q -l autoload") and enter this into the scratch buffer (the
path must be an absolute one):

--8<---------------cut here---------------start------------->8---
(setq generated-autoload-file "~/.emacs.d/org-7.8.09/lisp/org-install.el")
(update-directory-autoloads "lisp")
--8<---------------cut here---------------end--------------->8---

Then move the cursor to the end of each line and press C-j


Regards,
Achim.
-- 
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+

SD adaptations for KORG EX-800 and Poly-800MkII V0.9:
http://Synth.Stromeko.net/Downloads.html#KorgSDada

Re: error on opening org-file with #+startup: indent

[Bastien]

fkunze <fkunze@gmail.com> writes:

> Augment the installation description 
> (http://orgmode.org/manual/Installation.html#Installation) with a short 
> description for windows users (that avoids the use of make).

I'm not using Windows myself, but I would welcome a patch that clarifies
the installation process for Windows.

Anyone?

-- 
 Bastien

Re: error on opening org-file with #+startup: indent

[fkunze]

Bastien <bzg <at> gnu.org> writes:

> 
> fkunze <fkunze <at> gmail.com> writes:
> 
> > Augment the installation description 
> > (http://orgmode.org/manual/Installation.html#Installation) with a short 
> > description for windows users (that avoids the use of make).
> 
> I'm not using Windows myself, but I would welcome a patch that clarifies
> the installation process for Windows.
> 
> Anyone?
> 
Hi Bastien,
At the risk of redundancy (as I posted this paragraph earlier) the people 
at the python sphinx documentation project have a similar problem (of producing 
a "make" for windows) and it might be possible to rapidly develop a make.bat 
file for org-mode installations by making modifications of their "make.bat" 
source file:
 
https://trac.jmodelica.org/assimulo/browser/trunk/doc/sphinx/make.bat

I am too far removed from the intricacies of mapping the unix make options to
something that will work on windows - to produce something of real value in a
reasonable time period.  But I do have a friend who might be able to rapidly
develop an appropriate mapping.  Let me see if I can interest him in
satisfying 
your request.

Re: error on opening org-file with #+startup: indent

[Bastien]

fkunze <fkunze@gmail.com> writes:

> At the risk of redundancy (as I posted this paragraph earlier) the people 
> at the python sphinx documentation project have a similar problem (of producing 
> a "make" for windows) and it might be possible to rapidly develop a make.bat 
> file for org-mode installations by making modifications of their "make.bat" 
> source file:
>  
> https://trac.jmodelica.org/assimulo/browser/trunk/doc/sphinx/make.bat
>
> I am too far removed from the intricacies of mapping the unix make options to
> something that will work on windows - to produce something of real value in a
> reasonable time period.  But I do have a friend who might be able to rapidly
> develop an appropriate mapping.  Let me see if I can interest him in
> satisfying your request.

It would be highly appreciated -- thanks in advance!

-- 
 Bastien