* install and info
@ 2008-10-08 13:20 Richard Riley
2008-10-08 13:31 ` R: " Giovanni Ridolfi
` (2 more replies)
0 siblings, 3 replies; 12+ messages in thread
From: Richard Riley @ 2008-10-08 13:20 UTC (permalink / raw
To: org-mode
There might be an inconsistency in the install process. Well, on my
debian system.
In the Makefile we have
,----
| # Where local software is found
| prefix=/usr/local
|
| # Where local lisp files go.
| lispdir = $(prefix)/share/emacs/site-lisp
|
| # Where info files go.
| infodir = $(prefix)/info
`----
Now I dont pretend to even begin to understand how the info system works
but a "sudo make install-info" does not work because (a) it puts the
file into /usr/local/info and my system appears to expect it in
/usr/local/share/info. In addition the install info command appears to
be broken:
,----
| if [ ! -d /usr/local/info ]; then mkdir -p /usr/local/info; else true; fi ;
| cp -p doc/org /usr/local/info
| install-info --info-file=doc/org --info-dir=/usr/local/info
| Usage: install-info [<options> ...] [--] <filename>
`----
Hopefully someone can shed some light. I think it used to work but am
not sure if I was picking up a local info file before.
--
We are becoming the servants in thought, as in action, of the machine we have created to serve us. ~John Kenneth Galbraith
^ permalink raw reply [flat|nested] 12+ messages in thread
* R: install and info
2008-10-08 13:20 install and info Richard Riley
@ 2008-10-08 13:31 ` Giovanni Ridolfi
2008-10-08 13:41 ` Richard Riley
2008-10-08 13:34 ` Xiao-Yong Jin
2008-10-09 5:45 ` Carsten Dominik
2 siblings, 1 reply; 12+ messages in thread
From: Giovanni Ridolfi @ 2008-10-08 13:31 UTC (permalink / raw
To: org-mode
--- Mer 8/10/08, Richard Riley <rileyrgdev@googlemail.com> ha scritto:
> There might be an inconsistency in the install process.
> Well, on my debian system.
>
> In the Makefile we have
>
> ,----
> | # Where local software is found
> | prefix=/usr/local
> |
> | # Where local lisp files go.
> | lispdir = $(prefix)/share/emacs/site-lisp
> |
> | # Where info files go.
> | infodir = $(prefix)/info
> `----
>
> Now I dont pretend to even begin to understand how the info
> system works but a "sudo make install-info" does not work
> because (a) it puts the
> file into /usr/local/info and my system appears to expect
> it in
> /usr/local/share/info.
Richard,
the section of the Makefile you are referring to begins with:
##----------------------------------------------------------------------
## YOU MUST EDIT THE FOLLOWING LINES
##----------------------------------------------------------------------
so, please, modify your paths accordingly,
or download a quite recent version of org
from the Debian repository (for both testing, 6.05, and sid 6.06)
cheers,
Giovanni
Scopri il blog di Yahoo! Mail:
Trucchi, novità e scrivi la tua opinione.
http://www.ymailblogit.com/blog
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: install and info
2008-10-08 13:20 install and info Richard Riley
2008-10-08 13:31 ` R: " Giovanni Ridolfi
@ 2008-10-08 13:34 ` Xiao-Yong Jin
2008-10-09 5:45 ` Carsten Dominik
2 siblings, 0 replies; 12+ messages in thread
From: Xiao-Yong Jin @ 2008-10-08 13:34 UTC (permalink / raw
To: emacs-orgmode
Richard Riley <rileyrgdev@googlemail.com> writes:
> There might be an inconsistency in the install process. Well, on my
> debian system.
>
> In the Makefile we have
>
> ,----
> | # Where local software is found
> | prefix=/usr/local
> |
> | # Where local lisp files go.
> | lispdir = $(prefix)/share/emacs/site-lisp
> |
> | # Where info files go.
> | infodir = $(prefix)/info
> `----
>
> Now I dont pretend to even begin to understand how the info system works
> but a "sudo make install-info" does not work because (a) it puts the
> file into /usr/local/info and my system appears to expect it in
> /usr/local/share/info.
I changed infodir by myself.
> In addition the install info command appears to be broken:
>
> ,----
> | if [ ! -d /usr/local/info ]; then mkdir -p /usr/local/info; else true; fi ;
> | cp -p doc/org /usr/local/info
> | install-info --info-file=doc/org --info-dir=/usr/local/info
> | Usage: install-info [<options> ...] [--] <filename>
> `----
>
> Hopefully someone can shed some light. I think it used to work but am
> not sure if I was picking up a local info file before.
It always worked for me. This debian system probably has a
different install-info program as most of other system does.
On mine system:
install-info (GNU texinfo) 4.13
Usage: install-info [OPTION]... [INFO-FILE [DIR-FILE]]
--
c/* __o/*
<\ * (__
*/\ <
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: R: install and info
2008-10-08 13:31 ` R: " Giovanni Ridolfi
@ 2008-10-08 13:41 ` Richard Riley
0 siblings, 0 replies; 12+ messages in thread
From: Richard Riley @ 2008-10-08 13:41 UTC (permalink / raw
To: emacs-orgmode
Giovanni Ridolfi <giovanni.ridolfi@yahoo.it> writes:
> --- Mer 8/10/08, Richard Riley <rileyrgdev@googlemail.com> ha scritto:
>> There might be an inconsistency in the install process.
>> Well, on my debian system.
>>
>> In the Makefile we have
>>
>> ,----
>> | # Where local software is found
>> | prefix=/usr/local
>> |
>> | # Where local lisp files go.
>> | lispdir = $(prefix)/share/emacs/site-lisp
>> |
>> | # Where info files go.
>> | infodir = $(prefix)/info
>> `----
>>
>> Now I dont pretend to even begin to understand how the info
>> system works but a "sudo make install-info" does not work
>> because (a) it puts the
>> file into /usr/local/info and my system appears to expect
>> it in
>> /usr/local/share/info.
>
> Richard,
> the section of the Makefile you are referring to begins with:
> ##----------------------------------------------------------------------
> ## YOU MUST EDIT THE FOLLOWING LINES
> ##----------------------------------------------------------------------
>
> so, please, modify your paths accordingly,
I guess I was requesting (although didnt make it clear) some auto way of
detecting the target OS. Certainly if there is a site elisp I would
expect there to be a site info too - so there is still possibly an
inconsistency in the defaults.
> or download a quite recent version of org
> from the Debian repository (for both testing, 6.05, and sid 6.06)
Unfortunately they are broken for my setup so I use the recent versions
which are no 6.09 area.
>
> cheers,
>
> Giovanni
>
>
> Scopri il blog di Yahoo! Mail:
> Trucchi, novità e scrivi la tua opinione.
> http://www.ymailblogit.com/blog
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
--
Modern technology
Owes ecology
An apology.
~Alan M. Eddison
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: install and info
2008-10-08 13:20 install and info Richard Riley
2008-10-08 13:31 ` R: " Giovanni Ridolfi
2008-10-08 13:34 ` Xiao-Yong Jin
@ 2008-10-09 5:45 ` Carsten Dominik
2008-10-09 12:41 ` Bernt Hansen
2008-10-10 12:22 ` Sivaram Neelakantan
2 siblings, 2 replies; 12+ messages in thread
From: Carsten Dominik @ 2008-10-09 5:45 UTC (permalink / raw
To: Richard Riley; +Cc: org-mode
Hi everyone,
I'd be happy to change the default to
infodir = $(prefix)/share/info
if this is a better default for most systems. Is it better? So could
people on
different systems out there please check where the standard info
directory is located?
Thanks.
- Carsten
On Oct 8, 2008, at 3:20 PM, Richard Riley wrote:
>
> There might be an inconsistency in the install process. Well, on my
> debian system.
>
> In the Makefile we have
>
> ,----
> | # Where local software is found
> | prefix=/usr/local
> |
> | # Where local lisp files go.
> | lispdir = $(prefix)/share/emacs/site-lisp
> |
> | # Where info files go.
> | infodir = $(prefix)/info
> `----
>
> Now I dont pretend to even begin to understand how the info system
> works
> but a "sudo make install-info" does not work because (a) it puts the
> file into /usr/local/info and my system appears to expect it in
> /usr/local/share/info. In addition the install info command appears to
> be broken:
>
> ,----
> | if [ ! -d /usr/local/info ]; then mkdir -p /usr/local/info; else
> true; fi ;
> | cp -p doc/org /usr/local/info
> | install-info --info-file=doc/org --info-dir=/usr/local/info
> | Usage: install-info [<options> ...] [--] <filename>
> `----
>
> Hopefully someone can shed some light. I think it used to work but am
> not sure if I was picking up a local info file before.
>
>
> --
> We are becoming the servants in thought, as in action, of the
> machine we have created to serve us. ~John Kenneth Galbraith
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: install and info
2008-10-09 5:45 ` Carsten Dominik
@ 2008-10-09 12:41 ` Bernt Hansen
2008-10-09 13:08 ` Richard Riley
2008-10-10 12:22 ` Sivaram Neelakantan
1 sibling, 1 reply; 12+ messages in thread
From: Bernt Hansen @ 2008-10-09 12:41 UTC (permalink / raw
To: Carsten Dominik; +Cc: org-mode, Richard Riley
On three systems I have access to the info files are in /usr/share/info
- Debian
- FreeBSD
- Ubuntu
-Bernt
Carsten Dominik <dominik@science.uva.nl> writes:
> Hi everyone,
>
> I'd be happy to change the default to
>
> infodir = $(prefix)/share/info
>
>
> if this is a better default for most systems. Is it better? So could
> people on
> different systems out there please check where the standard info
> directory is located?
>
> Thanks.
>
> - Carsten
>
> On Oct 8, 2008, at 3:20 PM, Richard Riley wrote:
>
>>
>> There might be an inconsistency in the install process. Well, on my
>> debian system.
>>
>> In the Makefile we have
>>
>> ,----
>> | # Where local software is found
>> | prefix=/usr/local
>> |
>> | # Where local lisp files go.
>> | lispdir = $(prefix)/share/emacs/site-lisp
>> |
>> | # Where info files go.
>> | infodir = $(prefix)/info
>> `----
>>
>> Now I dont pretend to even begin to understand how the info system
>> works
>> but a "sudo make install-info" does not work because (a) it puts the
>> file into /usr/local/info and my system appears to expect it in
>> /usr/local/share/info. In addition the install info command appears to
>> be broken:
>>
>> ,----
>> | if [ ! -d /usr/local/info ]; then mkdir -p /usr/local/info; else
>> true; fi ;
>> | cp -p doc/org /usr/local/info
>> | install-info --info-file=doc/org --info-dir=/usr/local/info
>> | Usage: install-info [<options> ...] [--] <filename>
>> `----
>>
>> Hopefully someone can shed some light. I think it used to work but am
>> not sure if I was picking up a local info file before.
>>
>>
>> --
>> We are becoming the servants in thought, as in action, of the
>> machine we have created to serve us. ~John Kenneth Galbraith
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Remember: use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: install and info
2008-10-09 12:41 ` Bernt Hansen
@ 2008-10-09 13:08 ` Richard Riley
2008-10-09 13:30 ` Bernt Hansen
2008-10-09 14:16 ` Xiao-Yong Jin
0 siblings, 2 replies; 12+ messages in thread
From: Richard Riley @ 2008-10-09 13:08 UTC (permalink / raw
To: Bernt Hansen; +Cc: org-mode, Richard Riley
Bernt Hansen <bernt@norang.ca> writes:
> On three systems I have access to the info files are in /usr/share/info
>
> - Debian
> - FreeBSD
> - Ubuntu
Debian and Ubuntu should be the same I would think since Ubunti is
Debian based.
But there is an org which ships with emacs. I would expect the info file
from that to be there.
If one installs from CVS/git should it not be in /usr/local/share/info ?
I really am not sure personally and frequently have had issues with
other packages and the installation and location of Info files.
>
> -Bernt
>
> Carsten Dominik <dominik@science.uva.nl> writes:
>
>> Hi everyone,
>>
>> I'd be happy to change the default to
>>
>> infodir = $(prefix)/share/info
>>
>>
>> if this is a better default for most systems. Is it better? So could
>> people on
>> different systems out there please check where the standard info
>> directory is located?
>>
>> Thanks.
>>
>> - Carsten
>>
>> On Oct 8, 2008, at 3:20 PM, Richard Riley wrote:
>>
>>>
>>> There might be an inconsistency in the install process. Well, on my
>>> debian system.
>>>
>>> In the Makefile we have
>>>
>>> ,----
>>> | # Where local software is found
>>> | prefix=/usr/local
>>> |
>>> | # Where local lisp files go.
>>> | lispdir = $(prefix)/share/emacs/site-lisp
>>> |
>>> | # Where info files go.
>>> | infodir = $(prefix)/info
>>> `----
>>>
>>> Now I dont pretend to even begin to understand how the info system
>>> works
>>> but a "sudo make install-info" does not work because (a) it puts the
>>> file into /usr/local/info and my system appears to expect it in
>>> /usr/local/share/info. In addition the install info command appears to
>>> be broken:
>>>
>>> ,----
>>> | if [ ! -d /usr/local/info ]; then mkdir -p /usr/local/info; else
>>> true; fi ;
>>> | cp -p doc/org /usr/local/info
>>> | install-info --info-file=doc/org --info-dir=/usr/local/info
>>> | Usage: install-info [<options> ...] [--] <filename>
>>> `----
>>>
>>> Hopefully someone can shed some light. I think it used to work but am
>>> not sure if I was picking up a local info file before.
>>>
>>>
>>> --
>>> We are becoming the servants in thought, as in action, of the
>>> machine we have created to serve us. ~John Kenneth Galbraith
>>>
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Remember: use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Remember: use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
--
The factory of the future will have only two employees, a man and a dog. The man will be there to feed the dog. The dog will be there to keep the man from touching the equipment. ~Warren G. Bennis
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: install and info
2008-10-09 13:08 ` Richard Riley
@ 2008-10-09 13:30 ` Bernt Hansen
2008-10-09 14:16 ` Xiao-Yong Jin
1 sibling, 0 replies; 12+ messages in thread
From: Bernt Hansen @ 2008-10-09 13:30 UTC (permalink / raw
To: Richard Riley; +Cc: org-mode
Richard Riley <rileyrgdev@googlemail.com> writes:
> Bernt Hansen <bernt@norang.ca> writes:
>
>> On three systems I have access to the info files are in /usr/share/info
>>
>> - Debian
>> - FreeBSD
>> - Ubuntu
>
> Debian and Ubuntu should be the same I would think since Ubunti is
> Debian based.
Yes they should be but I thought I'd list it for completeness :)
I've never messed with info files before (from an installation point of
view) but I was under the impression that the top level 'dir' file needs
to be edited to include new documentation in the tree and that file
lives in whatever the standard info directory is on your system. I
think you can create new documentation in other locations but you still
need to reference it from the 'dir' file if you want it to be easy to
locate.
>
> But there is an org which ships with emacs. I would expect the info file
> from that to be there.
>
> If one installs from CVS/git should it not be in /usr/local/share/info ?
>
> I really am not sure personally and frequently have had issues with
> other packages and the installation and location of Info files.
Me either. I'm just trying to provide additional information in case
it's useful.
-Bernt
>>
>> Carsten Dominik <dominik@science.uva.nl> writes:
>>
>>> Hi everyone,
>>>
>>> I'd be happy to change the default to
>>>
>>> infodir = $(prefix)/share/info
>>>
>>>
>>> if this is a better default for most systems. Is it better? So could
>>> people on
>>> different systems out there please check where the standard info
>>> directory is located?
>>>
>>> Thanks.
>>>
>>> - Carsten
>>>
>>> On Oct 8, 2008, at 3:20 PM, Richard Riley wrote:
>>>
>>>>
>>>> There might be an inconsistency in the install process. Well, on my
>>>> debian system.
>>>>
>>>> In the Makefile we have
>>>>
>>>> ,----
>>>> | # Where local software is found
>>>> | prefix=/usr/local
>>>> |
>>>> | # Where local lisp files go.
>>>> | lispdir = $(prefix)/share/emacs/site-lisp
>>>> |
>>>> | # Where info files go.
>>>> | infodir = $(prefix)/info
>>>> `----
>>>>
>>>> Now I dont pretend to even begin to understand how the info system
>>>> works
>>>> but a "sudo make install-info" does not work because (a) it puts the
>>>> file into /usr/local/info and my system appears to expect it in
>>>> /usr/local/share/info. In addition the install info command appears to
>>>> be broken:
>>>>
>>>> ,----
>>>> | if [ ! -d /usr/local/info ]; then mkdir -p /usr/local/info; else
>>>> true; fi ;
>>>> | cp -p doc/org /usr/local/info
>>>> | install-info --info-file=doc/org --info-dir=/usr/local/info
>>>> | Usage: install-info [<options> ...] [--] <filename>
>>>> `----
>>>>
>>>> Hopefully someone can shed some light. I think it used to work but am
>>>> not sure if I was picking up a local info file before.
>>>>
>>>>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Re: install and info
2008-10-09 13:08 ` Richard Riley
2008-10-09 13:30 ` Bernt Hansen
@ 2008-10-09 14:16 ` Xiao-Yong Jin
2008-10-09 14:29 ` Richard Riley
1 sibling, 1 reply; 12+ messages in thread
From: Xiao-Yong Jin @ 2008-10-09 14:16 UTC (permalink / raw
To: emacs-orgmode
Richard Riley <rileyrgdev@googlemail.com> writes:
> Bernt Hansen <bernt@norang.ca> writes:
>
>> On three systems I have access to the info files are in /usr/share/info
>>
>> - Debian
>> - FreeBSD
>> - Ubuntu
>
> Debian and Ubuntu should be the same I would think since Ubunti is
> Debian based.
>
> But there is an org which ships with emacs. I would expect the info file
> from that to be there.
>
> If one installs from CVS/git should it not be in /usr/local/share/info ?
>
> I really am not sure personally and frequently have had issues with
> other packages and the installation and location of Info files.
>
This is the real problem. I guess most of the package
managers are not happy with conflicting files from different
packages. Gentoo, archlinux and FreeBSD are all not happy
with this. So I just decided to install info files some
where in my home directory and prepend that to my $INFOPATH.
Xiao-Yong
--
c/* __o/*
<\ * (__
*/\ <
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Re: install and info
2008-10-09 14:16 ` Xiao-Yong Jin
@ 2008-10-09 14:29 ` Richard Riley
2008-10-09 16:03 ` Xiao-Yong Jin
0 siblings, 1 reply; 12+ messages in thread
From: Richard Riley @ 2008-10-09 14:29 UTC (permalink / raw
To: emacs-orgmode
Xiao-Yong Jin <xj2106@columbia.edu> writes:
> Richard Riley <rileyrgdev@googlemail.com> writes:
>
>> Bernt Hansen <bernt@norang.ca> writes:
>>
>>> On three systems I have access to the info files are in /usr/share/info
>>>
>>> - Debian
>>> - FreeBSD
>>> - Ubuntu
>>
>> Debian and Ubuntu should be the same I would think since Ubunti is
>> Debian based.
>>
>> But there is an org which ships with emacs. I would expect the info file
>> from that to be there.
>>
>> If one installs from CVS/git should it not be in /usr/local/share/info ?
>>
>> I really am not sure personally and frequently have had issues with
>> other packages and the installation and location of Info files.
>>
>
> This is the real problem. I guess most of the package
> managers are not happy with conflicting files from different
> packages. Gentoo, archlinux and FreeBSD are all not happy
> with this. So I just decided to install info files some
> where in my home directory and prepend that to my $INFOPATH.
>
> Xiao-Yong
Did you have a local "dir" file too or put in a link into one of the
others?
I suspect this is getting a little OT now and more "How does info work"
:-; But it's reassuring to hear that others scratch their heads a little
too. I have lots of unresolved dir links since I removed (uninstalled
properly) emacs 22 and 21 and went for CVS Emacs 23 and that only adds
to my info woes ...
--
Technology... the knack of so arranging the world that we don't have to experience it. ~Max Frisch
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Re: install and info
2008-10-09 14:29 ` Richard Riley
@ 2008-10-09 16:03 ` Xiao-Yong Jin
0 siblings, 0 replies; 12+ messages in thread
From: Xiao-Yong Jin @ 2008-10-09 16:03 UTC (permalink / raw
To: emacs-orgmode
Richard Riley <rileyrgdev@googlemail.com> writes:
> Xiao-Yong Jin <xj2106@columbia.edu> writes:
>
>> Richard Riley <rileyrgdev@googlemail.com> writes:
>>
>>> Bernt Hansen <bernt@norang.ca> writes:
>>>
>>>> On three systems I have access to the info files are in /usr/share/info
>>>>
>>>> - Debian
>>>> - FreeBSD
>>>> - Ubuntu
>>>
>>> Debian and Ubuntu should be the same I would think since Ubunti is
>>> Debian based.
>>>
>>> But there is an org which ships with emacs. I would expect the info file
>>> from that to be there.
>>>
>>> If one installs from CVS/git should it not be in /usr/local/share/info ?
>>>
>>> I really am not sure personally and frequently have had issues with
>>> other packages and the installation and location of Info files.
>>>
>>
>> This is the real problem. I guess most of the package
>> managers are not happy with conflicting files from different
>> packages. Gentoo, archlinux and FreeBSD are all not happy
>> with this. So I just decided to install info files some
>> where in my home directory and prepend that to my $INFOPATH.
>>
>> Xiao-Yong
>
> Did you have a local "dir" file too or put in a link into one of the
> others?
Yes, I have a local "dir" file. In my case,
% echo $INFOPATH
/home/jin/etc/info:
% ls /home/jin/etc/info/
dir emacs-w3m-ja.info emacs-w3m.info emms org
>
> I suspect this is getting a little OT now and more "How does info work"
> :-; But it's reassuring to hear that others scratch their heads a little
> too. I have lots of unresolved dir links since I removed (uninstalled
> properly) emacs 22 and 21 and went for CVS Emacs 23 and that only adds
> to my info woes ...
As long as the file `dir' is in your $INFOPATH, it will be
searched before the one(s) in your system. And that's how I
override the system's while keep the system happy.
Xiao-Yong
--
c/* __o/*
<\ * (__
*/\ <
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: install and info
2008-10-09 5:45 ` Carsten Dominik
2008-10-09 12:41 ` Bernt Hansen
@ 2008-10-10 12:22 ` Sivaram Neelakantan
1 sibling, 0 replies; 12+ messages in thread
From: Sivaram Neelakantan @ 2008-10-10 12:22 UTC (permalink / raw
To: emacs-orgmode
Carsten Dominik <dominik@science.uva.nl> writes:
> Hi everyone,
>
> I'd be happy to change the default to
>
> infodir = $(prefix)/share/info
>
>
> if this is a better default for most systems. Is it better? So could
> people on different systems out there please check where the standard
> info directory is located?
>
> Thanks.
>
> - Carsten
>
[...]
On Windows, if you use unzip the Emacs binary under C:/ drive, the
info folder is under C:/Emacs-22.3/ as c:/Emacs-22.3/info.
sivaram
--
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2008-10-10 12:22 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-10-08 13:20 install and info Richard Riley
2008-10-08 13:31 ` R: " Giovanni Ridolfi
2008-10-08 13:41 ` Richard Riley
2008-10-08 13:34 ` Xiao-Yong Jin
2008-10-09 5:45 ` Carsten Dominik
2008-10-09 12:41 ` Bernt Hansen
2008-10-09 13:08 ` Richard Riley
2008-10-09 13:30 ` Bernt Hansen
2008-10-09 14:16 ` Xiao-Yong Jin
2008-10-09 14:29 ` Richard Riley
2008-10-09 16:03 ` Xiao-Yong Jin
2008-10-10 12:22 ` Sivaram Neelakantan
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.