From: "Eric Schulte" <schulte.eric@gmail.com>
To: David Hajage <dhajage@gmail.com>
Cc: emacs-orgmode@gnu.org
Subject: Re: Re: problem with babel and R
Date: Thu, 26 Aug 2010 17:37:54 -0600 [thread overview]
Message-ID: <87lj7tymgd.fsf@gmail.com> (raw)
In-Reply-To: <AANLkTinhurWcsVTJxSfL9F_B4ayQSQ0RzPrdpHEpZ6Em@mail.gmail.com> (David Hajage's message of "Fri, 27 Aug 2010 00:06:39 +0200")
Oh no!
It appears this solution may have been too clever for it's own good.
Thanks for suggesting ":results silent" as an additional default header
argument, that appears to fixed this weird behavior.
I've just pushed up that fix.
Cheers -- Eric
David Hajage <dhajage@gmail.com> writes:
> One comment:
>
> When I execute all the buffer (org-babel-execute-buffer), the result is:
>
> #+begin_src R :results output org :exports both
> library(ascii)
> options(asciiType = "org")
> ascii(head(esoph, 3))
> #+end_src
>
> #+results:
> #+BEGIN_SRC org
> | | agegp | alcgp | tobgp | ncases | ncontrols |
> |---+-------+-----------+----------+--------+-----------|
> | 1 | 25-34 | 0-39g/day | 0-9g/day | 0.00 | 40.00 |
> | 2 | 25-34 | 0-39g/day | 10-19 | 0.00 | 10.00 |
> | 3 | 25-34 | 0-39g/day | 20-29 | 0.00 | 6.00 |
> #+END_SRC
>
> #+results:
> | | agegp | alcgp | tobgp | ncases | ncontrols |
> |---+-------+-----------+----------+--------+-----------|
> | 1 | 25-34 | 0-39g/day | 0-9g/day | 0.00 | 40.00 |
> | 2 | 25-34 | 0-39g/day | 10-19 | 0.00 | 10.00 |
> | 3 | 25-34 | 0-39g/day | 20-29 | 0.00 | 6.00 |
>
> Then, the results is repeated twice in the buffer. I understand why, but
> perhaps the "silent" option should be turned on by default for org code
> blocks?
>
> David
>
>
> On Thu, Aug 26, 2010 at 23:51, David Hajage <dhajage@gmail.com> wrote:
>
>> Oups, I forgot ob-org in my .emacs... OK, now, really sorry for this.
>> David
>>
>>
>>
>> On Thu, Aug 26, 2010 at 22:20, David Hajage <dhajage@gmail.com> wrote:
>>
>>> I am so sorry to bother you again, but I must miss something.
>>>
>>> When I write:
>>>
>>> #+begin_src R :results output org :exports both
>>> library(ascii)
>>> options(asciiType = "org")
>>> ascii(head(esoph))
>>> #+end_src
>>>
>>> The results is:
>>>
>>> #+results:
>>> #+BEGIN_SRC org
>>> | | agegp | alcgp | tobgp | ncases | ncontrols |
>>> |---+-------+-----------+----------+--------+-----------|
>>> | 1 | 25-34 | 0-39g/day | 0-9g/day | 0.00 | 40.00 |
>>> | 2 | 25-34 | 0-39g/day | 10-19 | 0.00 | 10.00 |
>>> | 3 | 25-34 | 0-39g/day | 20-29 | 0.00 | 6.00 |
>>> | 4 | 25-34 | 0-39g/day | 30+ | 0.00 | 5.00 |
>>> | 5 | 25-34 | 40-79 | 0-9g/day | 0.00 | 27.00 |
>>> | 6 | 25-34 | 40-79 | 10-19 | 0.00 | 7.00 |
>>> #+END_SRC
>>>
>>> OK, the result is surrounded by BEGIN_SRC org/END_SRC. But when I export
>>> this, the results is exported as fontified org code. What should I do to
>>> have this result interpreted as org markup?
>>> David
>>>
>>>
>>>
>>> On Thu, Aug 26, 2010 at 18:10, Eric Schulte <schulte.eric@gmail.com>wrote:
>>>
>>>> Hi,
>>>>
>>>> A fix to this issue has been pushed up to the repository. As can now be
>>>> read in the documentation of the `org-babel-insert-result' function [1],
>>>> there is now a subtle distinction between ":results org" and ":results
>>>> raw", where ":results org" will wrap code block results in a "begin_src
>>>> org" block. The block wrapper makes it possible for the entirety of the
>>>> results to be located and removed by Babel upon code block
>>>> re-evaluation.
>>>>
>>>> In addition a new ob-org.el file has been added providing support for
>>>> evaluation of Org-mode blocks. With this new language support loaded
>>>> the above technique becomes a working replacement for ":results raw"
>>>> allowing the body of the org code block to be interpreted as inline
>>>> org-mode text on export. This is done through some non-standard default
>>>> header arguments described in the recent commit message (see [2])
>>>>
>>>> Best -- Eric
>>>>
>>>> "Eric Schulte" <schulte.eric@gmail.com> writes:
>>>>
>>>> > Hi David,
>>>> >
>>>> > "#+end_results: foo" (or some derivative syntax) sounds like a good
>>>> > idea, I'll add it to the Babel task list.
>>>> >
>>>> > Thanks -- Eric
>>>> >
>>>> > David Hajage <dhajage@gmail.com> writes:
>>>> >
>>>> >> OK, I understand that using ":results org", the results is not
>>>> altered,
>>>> >> there is no post processing. But I don't want a post processing, I
>>>> would
>>>> >> like a way to tell babel where is the begining *and the end* of the
>>>> output
>>>> >> produces by a particular R source block. I think an "#+end_results:
>>>> foo" at
>>>> >> the end of the output could do the job. Then, the option "replace"
>>>> could
>>>> >> work in all situation, even if a blank line is inserted somewhere in
>>>> the org
>>>> >> output. No?
>>>> >> David
>>>> >>
>>>> >>
>>>> >> On Tue, Aug 17, 2010 at 17:15, Eric Schulte <schulte.eric@gmail.com>
>>>> wrote:
>>>> >>
>>>> >>> Hi David,
>>>> >>>
>>>> >>> David Hajage <dhajage@gmail.com> writes:
>>>> >>>
>>>> >>> > Thank you very much for your answer.
>>>> >>> >
>>>> >>>
>>>> >>> My pleasure
>>>> >>>
>>>> >>> >
>>>> >>> > But when I run the following code directly into R, no extra lines
>>>> is
>>>> >>> >added
>>>> >>> > by the ascii function:
>>>> >>> >> library(ascii)
>>>> >>> > Le chargement a nécessité le package : proto
>>>> >>> >> options(asciiType = "org")
>>>> >>> >> ascii(head(esoph)) # no extra line
>>>> >>> > | | agegp | alcgp | tobgp | ncases | ncontrols |
>>>> >>> > |---+-------+-----------+----------+--------+-----------|
>>>> >>> > | 1 | 25-34 | 0-39g/day | 0-9g/day | 0.00 | 40.00 |
>>>> >>> > | 2 | 25-34 | 0-39g/day | 10-19 | 0.00 | 10.00 |
>>>> >>> > | 3 | 25-34 | 0-39g/day | 20-29 | 0.00 | 6.00 |
>>>> >>> > | 4 | 25-34 | 0-39g/day | 30+ | 0.00 | 5.00 |
>>>> >>> > | 5 | 25-34 | 40-79 | 0-9g/day | 0.00 | 27.00 |
>>>> >>> > | 6 | 25-34 | 40-79 | 10-19 | 0.00 | 7.00 |
>>>> >>> >
>>>> >>>
>>>> >>> ah, my fault, this isn't an ascii issue.
>>>> >>>
>>>> >>> >
>>>> >>> > In fact, the solution was to run 'library(ascii)' in another source
>>>> >>> block.
>>>> >>> > When I run only this:
>>>> >>> >
>>>> >>>
>>>> >>> Thanks for pointing this out, I see what's happening now.
>>>> >>>
>>>> >>> The :results output header argument (see [1] for information on
>>>> header
>>>> >>> arguments) informs Org-mode to collect all of the output of the
>>>> source
>>>> >>> code block. This means that when library(ascii) is run, an empty
>>>> line
>>>> >>> is collected and appended to the output. Removing the "output"
>>>> header
>>>> >>> argument should fix this issue.
>>>> >>>
>>>> >>> My I ask why you are using the ascii package for simple table output?
>>>> >>> It seems to me that this would be much simpler using the pure
>>>> Org-mode
>>>> >>> solution I suggested in my previous email.
>>>> >>>
>>>> >>> >
>>>> >>> > #+begin_src R :session *R* :results output org replace
>>>> >>> > ascii(head(esoph))
>>>> >>> > #+end_src
>>>> >>> >
>>>> >>> > #+results: foo
>>>> >>> > | | agegp | alcgp | tobgp | ncases | ncontrols |
>>>> >>> > |---+-------+-----------+----------+--------+-----------|
>>>> >>> > | 1 | 25-34 | 0-39g/day | 0-9g/day | 0.00 | 40.00 |
>>>> >>> > | 2 | 25-34 | 0-39g/day | 10-19 | 0.00 | 10.00 |
>>>> >>> > | 3 | 25-34 | 0-39g/day | 20-29 | 0.00 | 6.00 |
>>>> >>> > | 4 | 25-34 | 0-39g/day | 30+ | 0.00 | 5.00 |
>>>> >>> > | 5 | 25-34 | 40-79 | 0-9g/day | 0.00 | 27.00 |
>>>> >>> > | 6 | 25-34 | 40-79 | 10-19 | 0.00 | 7.00 |
>>>> >>> >
>>>> >>> > Everything is then OK.
>>>> >>> > I have no idea why "library(ascii)..." generates an extra empty
>>>> line in
>>>> >>> the
>>>> >>> > results.
>>>> >>> >
>>>> >>> > If I understand, the results is all the text directly under
>>>> "#+results:",
>>>> >>> > until the first empty line. But what happens if the result contains
>>>> empty
>>>> >>> > lines? Here an example with ascii and Hmisc package:
>>>> >>> >
>>>> >>>
>>>> >>> This is not quite right, see [2] for a discussion of results
>>>> handling.
>>>> >>> The "org" option to results is a special case in which no
>>>> >>> post-processing of the results takes place, and the raw output is
>>>> >>> inserted into the org-mode buffer.
>>>> >>>
>>>> >>> Under normal usage w/o this header argument, results are either
>>>> tabular
>>>> >>> or are textual. If tabular a single table can easily be recognized
>>>> and
>>>> >>> handled, if textual they are normally enclosed in a block (example,
>>>> >>> html, latex, etc...), the block then allows for empty lines while
>>>> still
>>>> >>> making it clear where the results end.
>>>> >>>
>>>> >>
>>>> >>
>>>> >>>
>>>> >>> >
>>>> >>> >> library(ascii)
>>>> >>> >> library(Hmisc)
>>>> >>> >> ascii(describe(esoph[, 1:3]))
>>>> >>> > #+CAPTION: esoph[, 1:3]
>>>> >>> > - 3 Variable
>>>> >>> > - 88 Observations
>>>> >>> >
>>>> >>> > *agegp*
>>>> >>> > | n | missing | unique |
>>>> >>> > | 88 | 0 | 6 |
>>>> >>> >
>>>> >>> > | | 25-34 | 35-44 | 45-54 | 55-64 | 65-74 | 75+ |
>>>> >>> > | Frequency | 15 | 15 | 16 | 16 | 15 | 11 |
>>>> >>> > | % | 17 | 17 | 18 | 18 | 17 | 12 |
>>>> >>> >
>>>> >>> > *alcgp*
>>>> >>> > | n | missing | unique |
>>>> >>> > | 88 | 0 | 4 |
>>>> >>> >
>>>> >>> > 0-39g/day (23, 26%), 40-79 (23, 26%), 80-119 (21, 24%), 120+ (21,
>>>> 24%)
>>>> >>> >
>>>> >>> > *tobgp*
>>>> >>> > | n | missing | unique |
>>>> >>> > | 88 | 0 | 4 |
>>>> >>> >
>>>> >>> > 0-9g/day (24, 27%), 10-19 (24, 27%), 20-29 (20, 23%), 30+ (20,
>>>> 23%)
>>>> >>> >
>>>> >>> > As you can see, describe() generate a description of my data, and
>>>> ascii
>>>> >>> > generate org-mode markup as result. The result contains empty rows.
>>>> Since
>>>> >>> > there is no special characters indicating the end of the results in
>>>> >>> babel,
>>>> >>> > replace option will not work in this case. Is there any workaround?
>>>> >>> >
>>>> >>>
>>>> >>> When using ":results org" there is no workaround, as the explicit
>>>> >>> purpose of this setting is for your results to be inserted directly
>>>> into
>>>> >>> the Org-mode buffer w/o any interpretation or alteration.
>>>> >>>
>>>> >>
>>>> >>
>>>> >>>
>>>> >>> In general I would recommend keeping a 1-to-1 mapping between code
>>>> >>> blocks and result items, which should resolve this issue.
>>>> >>>
>>>> >>> >
>>>> >>> > Of course, ascii is not usefull in this case, but it can coerce
>>>> into
>>>> >>> > org-mode markup many other R objects (see my previous example and
>>>> >>> > http://orgmode.org/worg/org-contrib/babel/examples/ascii.php)
>>>> >>> >
>>>> >>>
>>>> >>> I see, that answers my question from above. Thanks
>>>> >>>
>>>> >>> Hope this helps -- Eric
>>>> >>>
>>>> >>> >
>>>> >>> > David
>>>> >>> >
>>>> >>> >
>>>> >>> > On Tue, Aug 17, 2010 at 15:57, Eric Schulte <
>>>> schulte.eric@gmail.com>
>>>> >>> wrote:
>>>> >>> >
>>>> >>> >> Hi David,
>>>> >>> >>
>>>> >>> >> It seems that the problem here is in the ascii package. It is
>>>> inserting
>>>> >>> >> an empty line at the beginning of your table, so that the table is
>>>> not
>>>> >>> >> snugly sitting under the #+results foo tag, because of this the
>>>> table
>>>> >>> >> isn't seen as results and is not replaced -- if you delete that
>>>> space
>>>> >>> >> then re-run the code block you'll notice that the table is
>>>> replaced.
>>>> >>> >>
>>>> >>> >> Org-mode is very capable of inserting tabular data into Org-mode
>>>> >>> >> documents without using the ascii package. For example the
>>>> following
>>>> >>> >> would be a more idiomatic example of using Org-mode to create a
>>>> table
>>>> >>> >> from R code.
>>>> >>> >>
>>>> >>> >> --8<---------------cut here---------------start------------->8---
>>>> >>> >> #+begin_src R
>>>> >>> >> numbers <- matrix(c(51,43,22,92,28,21,68,22,9),ncol=3,byrow=TRUE)
>>>> >>> >> numbers
>>>> >>> >> #+end_src
>>>> >>> >>
>>>> >>> >> #+results:
>>>> >>> >> | 51 | 43 | 22 |
>>>> >>> >> | 92 | 28 | 21 |
>>>> >>> >> | 68 | 22 | 9 |
>>>> >>> >>
>>>> >>> >> #+begin_src R :colnames yes
>>>> >>> >> numbers <- matrix(c(51,43,22,92,28,21,68,22,9),ncol=3,byrow=TRUE)
>>>> >>> >> numbers
>>>> >>> >> #+end_src
>>>> >>> >>
>>>> >>> >> #+results:
>>>> >>> >> | V1 | V2 | V3 |
>>>> >>> >> |----+----+----|
>>>> >>> >> | 51 | 43 | 22 |
>>>> >>> >> | 92 | 28 | 21 |
>>>> >>> >> | 68 | 22 | 9 |
>>>> >>> >> --8<---------------cut here---------------end--------------->8---
>>>> >>> >>
>>>> >>> >> or applied to your example, the following code block should
>>>> generate the
>>>> >>> >> desired results.
>>>> >>> >>
>>>> >>> >> --8<---------------cut here---------------start------------->8---
>>>> >>> >> #+srcname: foo
>>>> >>> >> #+begin_src R :session *R*
>>>> >>> >> head(esoph)
>>>> >>> >> #+end_src
>>>> >>> >> --8<---------------cut here---------------end--------------->8---
>>>> >>> >>
>>>> >>> >> One last small note: the "replace" argument to :results is
>>>> normally the
>>>> >>> >> default value, and doesn't need to be explicitly added (although I
>>>> can
>>>> >>> >> see why you would have added it in this case since it wasn't
>>>> working as
>>>> >>> >> expected).
>>>> >>> >>
>>>> >>> >> Cheers -- Eric
>>>> >>> >>
>>>> >>> >> David Hajage <dhajage@gmail.com> writes:
>>>> >>> >>
>>>> >>> >> > I tried the code with the last development version of org-mode:
>>>> >>> >> >
>>>> >>> >> > #+srcname: foo
>>>> >>> >> > #+begin_src R :session *R* :results output org replace
>>>> >>> >> > library(ascii)
>>>> >>> >> > options(asciiType = "org")
>>>> >>> >> > ascii(head(esoph))
>>>> >>> >> > #+end_src
>>>> >>> >> >
>>>> >>> >> > #+results: foo
>>>> >>> >> >
>>>> >>> >> > | | agegp | alcgp | tobgp | ncases | ncontrols |
>>>> >>> >> > |---+-------+-----------+----------+--------+-----------|
>>>> >>> >> > | 1 | 25-34 | 0-39g/day | 0-9g/day | 0.00 | 40.00 |
>>>> >>> >> > | 2 | 25-34 | 0-39g/day | 10-19 | 0.00 | 10.00 |
>>>> >>> >> > | 3 | 25-34 | 0-39g/day | 20-29 | 0.00 | 6.00 |
>>>> >>> >> > | 4 | 25-34 | 0-39g/day | 30+ | 0.00 | 5.00 |
>>>> >>> >> > | 5 | 25-34 | 40-79 | 0-9g/day | 0.00 | 27.00 |
>>>> >>> >> > | 6 | 25-34 | 40-79 | 10-19 | 0.00 | 7.00 |
>>>> >>> >> >
>>>> >>> >> > | | agegp | alcgp | tobgp | ncases | ncontrols |
>>>> >>> >> > |---+-------+-----------+----------+--------+-----------|
>>>> >>> >> > | 1 | 25-34 | 0-39g/day | 0-9g/day | 0.00 | 40.00 |
>>>> >>> >> > | 2 | 25-34 | 0-39g/day | 10-19 | 0.00 | 10.00 |
>>>> >>> >> > | 3 | 25-34 | 0-39g/day | 20-29 | 0.00 | 6.00 |
>>>> >>> >> > | 4 | 25-34 | 0-39g/day | 30+ | 0.00 | 5.00 |
>>>> >>> >> > | 5 | 25-34 | 40-79 | 0-9g/day | 0.00 | 27.00 |
>>>> >>> >> > | 6 | 25-34 | 40-79 | 10-19 | 0.00 | 7.00 |
>>>> >>> >> >
>>>> >>> >> > There is no more ">", but an extra space.
>>>> >>> >> > But, the replace option doesn't work: results are still
>>>> appended. I am
>>>> >>> >> not
>>>> >>> >> > an org-mode guru (far, far away), but I think this is because
>>>> when
>>>> >>> output
>>>> >>> >> is
>>>> >>> >> > org, there is no indication about the "end" of the results.
>>>> >>> >> >
>>>> >>> >> > David
>>>> >>> >> >
>>>> >>> >> >
>>>> >>> >> > On Tue, Aug 17, 2010 at 10:17, David Hajage <dhajage@gmail.com>
>>>> >>> wrote:
>>>> >>> >> >
>>>> >>> >> >> Hello,
>>>> >>> >> >>
>>>> >>> >> >> I am trying to use babel with R. Here the code:
>>>> >>> >> >>
>>>> >>> >> >> #+srcname: foo
>>>> >>> >> >> #+begin_src R :session *R* :results output org replace
>>>> >>> >> >> library(ascii)
>>>> >>> >> >> options(asciiType = "org")
>>>> >>> >> >> ascii(head(esoph))
>>>> >>> >> >> #+end_src
>>>> >>> >> >>
>>>> >>> >> >> #+results: foo
>>>> >>> >> >>
>>>> >>> >> >> > | | agegp | alcgp | tobgp | ncases | ncontrols |
>>>> >>> >> >> |---+-------+-----------+----------+--------+-----------|
>>>> >>> >> >> | 1 | 25-34 | 0-39g/day | 0-9g/day | 0.00 | 40.00 |
>>>> >>> >> >> | 2 | 25-34 | 0-39g/day | 10-19 | 0.00 | 10.00 |
>>>> >>> >> >> | 3 | 25-34 | 0-39g/day | 20-29 | 0.00 | 6.00 |
>>>> >>> >> >> | 4 | 25-34 | 0-39g/day | 30+ | 0.00 | 5.00 |
>>>> >>> >> >> | 5 | 25-34 | 40-79 | 0-9g/day | 0.00 | 27.00 |
>>>> >>> >> >> | 6 | 25-34 | 40-79 | 10-19 | 0.00 | 7.00 |
>>>> >>> >> >>
>>>> >>> >> >> > | | agegp | alcgp | tobgp | ncases | ncontrols |
>>>> >>> >> >> |---+-------+-----------+----------+--------+-----------|
>>>> >>> >> >> | 1 | 25-34 | 0-39g/day | 0-9g/day | 0.00 | 40.00 |
>>>> >>> >> >> | 2 | 25-34 | 0-39g/day | 10-19 | 0.00 | 10.00 |
>>>> >>> >> >> | 3 | 25-34 | 0-39g/day | 20-29 | 0.00 | 6.00 |
>>>> >>> >> >> | 4 | 25-34 | 0-39g/day | 30+ | 0.00 | 5.00 |
>>>> >>> >> >> | 5 | 25-34 | 40-79 | 0-9g/day | 0.00 | 27.00 |
>>>> >>> >> >> | 6 | 25-34 | 40-79 | 10-19 | 0.00 | 7.00 |
>>>> >>> >> >>
>>>> >>> >> >> With org-mode 7.01g in emacs 23, there is two problems:
>>>> >>> >> >> - an extra ">" is added in the first line while output is
>>>> "org"
>>>> >>> >> >> - when I run the code twice, the new results is appended,
>>>> while I
>>>> >>> have
>>>> >>> >> the
>>>> >>> >> >> option "replace".
>>>> >>> >> >>
>>>> >>> >> >> Is there any problem with my header?
>>>> >>> >> >>
>>>> >>> >> >> Thank you very much for your help.
>>>> >>> >> >> David
>>>> >>> >> >>
>>>> >>> >> > _______________________________________________
>>>> >>> >> > Emacs-orgmode mailing list
>>>> >>> >> > Please use `Reply All' to send replies to the list.
>>>> >>> >> > Emacs-orgmode@gnu.org
>>>> >>> >> > http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>> >>> >>
>>>> >>>
>>>> >>> Footnotes:
>>>> >>> [1]
>>>> http://orgmode.org/manual/Header-arguments.html#Header-arguments
>>>> >>>
>>>> >>> [2]
>>>> >>>
>>>> http://orgmode.org/manual/Results-of-evaluation.html#Results-of-evaluation
>>>> >>>
>>>> >>>
>>>> >>> L'intégrité de ce message n'étant pas assurée sur Internet,
>>>> l'Institut
>>>> >>> Curie ne peut être tenu responsable de son contenu.
>>>> >>> Si vous n'êtes pas destinataire de ce message confidentiel, merci de
>>>> le
>>>> >>> détruire et d'avertir immédiatement l'expéditeur.
>>>> >>> Afin de contribuer au respect de l'environnement, merci de n'imprimer
>>>> ce
>>>> >>> mail qu'en cas de nécessité.
>>>> >>>
>>>>
>>>> Footnotes:
>>>> [1]
>>>> ,----[org-babel-insert-result]
>>>> | org-babel-insert-result is a Lisp function in `ob.el'.
>>>> |
>>>> | (org-babel-insert-result RESULT &optional RESULT-PARAMS INFO HASH
>>>> | INDENT LANG)
>>>> |
>>>> | Insert RESULT into the current buffer.
>>>> | By default RESULT is inserted after the end of the
>>>> | current source block. With optional argument RESULT-PARAMS
>>>> | controls insertion of results in the org-mode file.
>>>> | RESULT-PARAMS can take the following values...
>>>> |
>>>> | replace - (default option) insert results after the source block
>>>> | replacing any previously inserted results
>>>> |
>>>> | silent -- no results are inserted
>>>> |
>>>> | file ---- the results are interpreted as a file path, and are
>>>> | inserted into the buffer using the Org-mode file syntax
>>>> |
>>>> | raw ----- results are added directly to the org-mode file. This
>>>> | is a good option if you code block will output org-mode
>>>> | formatted text.
>>>> |
>>>> | org ----- this is the same as the 'raw' option
>>>> |
>>>> | html ---- results are added inside of a #+BEGIN_HTML block. This
>>>> | is a good option if you code block will output html
>>>> | formatted text.
>>>> |
>>>> | latex --- results are added inside of a #+BEGIN_LATEX block.
>>>> | This is a good option if you code block will output
>>>> | latex formatted text.
>>>> |
>>>> | code ---- the results are extracted in the syntax of the source
>>>> | code of the language being evaluated and are added
>>>> | inside of a #+BEGIN_SRC block with the source-code
>>>> | language set appropriately. Note this relies on the
>>>> | optional LANG argument.
>>>> |
>>>> | [back]
>>>> `----
>>>>
>>>> [2]
>>>> ,----
>>>> | ob-org has two non-standard header arguments in that it exports it's
>>>> | results by default and the result type defaults to raw, this ensures
>>>> | that the body of a begin_src org block exports transparently.
>>>> |
>>>> | This is a breaking change in that if you are currently using org
>>>> | code blocks to export org-fontified code you will have to set the
>>>> | ":exports" header argument for org-mode blocks to "code" on a block,
>>>> | file, language or system-wide basis.
>>>> `----
>>>>
>>>
>>>
>>
prev parent reply other threads:[~2010-08-26 23:38 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-17 8:17 problem with babel and R David Hajage
2010-08-17 12:01 ` David Hajage
2010-08-17 13:57 ` Eric Schulte
2010-08-17 14:41 ` David Hajage
2010-08-17 15:15 ` Eric Schulte
2010-08-17 17:07 ` Tom Short
[not found] ` <1668ca$1pq4c@mail.curie.net>
2010-08-18 6:53 ` David Hajage
2010-08-18 22:13 ` Eric Schulte
2010-08-26 16:10 ` Eric Schulte
2010-08-26 20:20 ` David Hajage
2010-08-26 21:51 ` David Hajage
2010-08-26 22:06 ` David Hajage
2010-08-26 23:37 ` Eric Schulte [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87lj7tymgd.fsf@gmail.com \
--to=schulte.eric@gmail.com \
--cc=dhajage@gmail.com \
--cc=emacs-orgmode@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.