Re: Can I turn on some minor mode on specific files?

Re: Can I turn on some minor mode on specific files?

[Pascal J. Bourguignon]

Hongxu Chen <leftcopy.chx@gmail.com> writes:

> Hi list,
>
>    I sometimes do not need to spell check for all the text files, but
>    only a few specific files on-line. So I would like the spell checker
>    like flymake only turned on for these files. Is there a way to do so?
>    I guess that the file-local variable might help, however I am not
>    familiar with the `eval' syntax.

Just put: -*- mode:flyspell -*-
on the first or second line.


Alternatively, put:

Local Variables:
mode: flyspell
End:

within the last 512 bytes of the file.



If you want to activate it for a whole familly of files determined by
their path (eg. extension, name or directory component), you can use
auto-mode-alist.


-- 
__Pascal Bourguignon__                     http://www.informatimago.com/
A bad day in () is better than a good day in {}.
You can take the lisper out of the lisp job, but you can't take the lisp out
of the lisper (; -- antifuchs

Re: Can I turn on some minor mode on specific files?

[Hongxu Chen]

It works, thanks, Pascal.
Didn't realize that I could use `mode' that way. Seems that it specifies
the additional minor-mode, but it is not a variable(at least `C-h v'
cannot fetch it). So what is the mechanism?

Another question, is the local variable specified should be limited to
be within 512 bytes exactly? I haven't found the related docs yet.

"Pascal J. Bourguignon" <pjb@informatimago.com> writes:

> Hongxu Chen <leftcopy.chx@gmail.com> writes:
>
>> Hi list,
>>
>>    I sometimes do not need to spell check for all the text files, but
>>    only a few specific files on-line. So I would like the spell checker
>>    like flymake only turned on for these files. Is there a way to do so?
>>    I guess that the file-local variable might help, however I am not
>>    familiar with the `eval' syntax.
>
> Just put: -*- mode:flyspell -*-
> on the first or second line.
>
>
> Alternatively, put:
>
> Local Variables:
> mode: flyspell
> End:
>
> within the last 512 bytes of the file.
>
>
>
> If you want to activate it for a whole familly of files determined by
> their path (eg. extension, name or directory component), you can use
> auto-mode-alist.

-- 
Regards,
Hongxu Chen

Re: Can I turn on some minor mode on specific files?

[Bernardo]

> 
> Another question, is the local variable specified should be limited to
> be within 512 bytes exactly? I haven't found the related docs yet.

M-: (info "(emacs)Specifying file variables")

Re: Can I turn on some minor mode on specific files?

[Hongxu Chen]

But it complains:

  Info-find-file: Info file emacs does not exist

I am runnning on Emacs 24.3.

Also, Pascal's advice is NOT correct since adding `mode' in the modeline
would change the major mode rather than minor modes, and the right way
is to append the following:

# Local Variables:
# eval: (flyspell-mode 1)
# End:

Bernardo <bernardo.bacic@pobox.com> writes:

>>
>> Another question, is the local variable specified should be limited to
>> be within 512 bytes exactly? I haven't found the related docs yet.
>
> M-: (info "(emacs)Specifying file variables")
>
>

-- 
Regards,
Hongxu Chen

Re: Can I turn on some minor mode on specific files?

[Jambunathan K]

If you are on debian, try

        sudo apt-get install emacs23-common-non-dfsg



Hongxu Chen <leftcopy.chx@gmail.com> writes:

> But it complains:
>
>   Info-find-file: Info file emacs does not exist
>
> I am runnning on Emacs 24.3.
>
> Also, Pascal's advice is NOT correct since adding `mode' in the modeline
> would change the major mode rather than minor modes, and the right way
> is to append the following:
>
> # Local Variables:
> # eval: (flyspell-mode 1)
> # End:
>
> Bernardo <bernardo.bacic@pobox.com> writes:
>
>>>
>>> Another question, is the local variable specified should be limited to
>>> be within 512 bytes exactly? I haven't found the related docs yet.
>>
>> M-: (info "(emacs)Specifying file variables")
>>
>>

Re: Can I turn on some minor mode on specific files?

[Hongxu Chen]

Thanks, I can get the info page now:-)

Jambunathan K <kjambunathan@gmail.com> writes:

> If you are on debian, try
>
>         sudo apt-get install emacs23-common-non-dfsg
>
>
>
> Hongxu Chen <leftcopy.chx@gmail.com> writes:
>
>> But it complains:
>>
>>   Info-find-file: Info file emacs does not exist
>>
>> I am runnning on Emacs 24.3.
>>
>> Also, Pascal's advice is NOT correct since adding `mode' in the modeline
>> would change the major mode rather than minor modes, and the right way
>> is to append the following:
>>
>> # Local Variables:
>> # eval: (flyspell-mode 1)
>> # End:
>>
>> Bernardo <bernardo.bacic@pobox.com> writes:
>>
>>>>
>>>> Another question, is the local variable specified should be limited to
>>>> be within 512 bytes exactly? I haven't found the related docs yet.
>>>
>>> M-: (info "(emacs)Specifying file variables")
>>>
>>>

-- 
Regards,
Hongxu Chen

Re: Can I turn on some minor mode on specific files?

[Pascal J. Bourguignon]

Hongxu Chen <leftcopy.chx@gmail.com> writes:

> But it complains:
>
>   Info-find-file: Info file emacs does not exist
>
> I am runnning on Emacs 24.3.
>
> Also, Pascal's advice is NOT correct since adding `mode' in the modeline
> would change the major mode rather than minor modes, and the right way
> is to append the following:

You should of course put your major mode first, but you can add as many
minor modes you want:

-*- mode:text;mode:hs-minor;mode:flyspell -*-



-- 
__Pascal Bourguignon__                     http://www.informatimago.com/
A bad day in () is better than a good day in {}.
You can take the lisper out of the lisp job, but you can't take the lisp out
of the lisper (; -- antifuchs

Re: Can I turn on some minor mode on specific files?

[Hongxu Chen]

So in this way I have to add the major-mode explicitly then?

"Pascal J. Bourguignon" <pjb@informatimago.com> writes:

> Hongxu Chen <leftcopy.chx@gmail.com> writes:
>
>> But it complains:
>>
>>   Info-find-file: Info file emacs does not exist
>>
>> I am runnning on Emacs 24.3.
>>
>> Also, Pascal's advice is NOT correct since adding `mode' in the modeline
>> would change the major mode rather than minor modes, and the right way
>> is to append the following:
>
> You should of course put your major mode first, but you can add as many
> minor modes you want:
>
> -*- mode:text;mode:hs-minor;mode:flyspell -*-

-- 
Regards,
Hongxu Chen

Re: Can I turn on some minor mode on specific files?

[Pascal J. Bourguignon]

Hongxu Chen <leftcopy.chx@gmail.com> writes:

> So in this way I have to add the major-mode explicitly then?

Yes, it seems to be the case, indeed.  


-- 
__Pascal Bourguignon__                     http://www.informatimago.com/
A bad day in () is better than a good day in {}.
You can take the lisper out of the lisp job, but you can't take the lisp out
of the lisper (; -- antifuchs

Re: Can I turn on some minor mode on specific files?

[Hongxu Chen]

Got it. Thanks!

"Pascal J. Bourguignon" <pjb@informatimago.com> writes:

> Hongxu Chen <leftcopy.chx@gmail.com> writes:
>
>> So in this way I have to add the major-mode explicitly then?
>
> Yes, it seems to be the case, indeed.  

-- 
Regards,
Hongxu Chen

Can I turn on some minor mode on specific files?

[Hongxu Chen]

Hi list,

   I sometimes do not need to spell check for all the text files, but
   only a few specific files on-line. So I would like the spell checker
   like flymake only turned on for these files. Is there a way to do so?
   I guess that the file-local variable might help, however I am not
   familiar with the `eval' syntax.

   Thanks in advance.


Regards,
Hongxu Chen