* bug#12345: 24.2.50; doc string of `text-scale-adjust'
@ 2012-09-04 2:54 Drew Adams
2012-09-11 13:37 ` Bastien
0 siblings, 1 reply; 17+ messages in thread
From: Drew Adams @ 2012-09-04 2:54 UTC (permalink / raw
To: 12345
1. Describe the parameter, INC.
2. Describe the use of a prefix argument.
In general, describe this as a user command, from a user point of view,
and not just as a function to be called from code.
In GNU Emacs 24.2.50.1 (i386-mingw-nt5.1.2600)
of 2012-09-02 on MARVIN
Bzr revision: 109861 eggert@cs.ucla.edu-20120902171035-7mzihil3xd6bjfiy
Windowing system distributor `Microsoft Corp.', version 5.1.2600
Configured using:
`configure --with-gcc (4.6) --no-opt --enable-checking --cflags
-ID:/devel/emacs/libs/libXpm-3.5.8/include
-ID:/devel/emacs/libs/libXpm-3.5.8/src
-ID:/devel/emacs/libs/libpng-dev_1.4.3-1/include
-ID:/devel/emacs/libs/zlib-dev_1.2.5-2/include
-ID:/devel/emacs/libs/giflib-4.1.4-1/include
-ID:/devel/emacs/libs/jpeg-6b-4/include
-ID:/devel/emacs/libs/tiff-3.8.2-1/include
-ID:/devel/emacs/libs/gnutls-3.0.9/include
-ID:/devel/emacs/libs/libiconv-1.13.1-1-dev/include
-ID:/devel/emacs/libs/libxml2-2.7.8/include/libxml2'
^ permalink raw reply [flat|nested] 17+ messages in thread
* bug#12345: 24.2.50; doc string of `text-scale-adjust'
2012-09-04 2:54 bug#12345: 24.2.50; doc string of `text-scale-adjust' Drew Adams
@ 2012-09-11 13:37 ` Bastien
2012-09-11 13:48 ` Stefan Monnier
2012-09-11 14:24 ` Drew Adams
0 siblings, 2 replies; 17+ messages in thread
From: Bastien @ 2012-09-11 13:37 UTC (permalink / raw
To: Drew Adams; +Cc: 12345
[-- Attachment #1: Type: text/plain, Size: 664 bytes --]
"Drew Adams" <drew.adams@oracle.com> writes:
> 1. Describe the parameter, INC.
>
> 2. Describe the use of a prefix argument.
>
> In general, describe this as a user command, from a user point of view,
> and not just as a function to be called from code.
See attached patch.
I enhanced the docstring and rewrote the command so that it does
not use a temporary keymap. When I tried `C-x C-+' I was left with
the `+' and `-' keys not usable anymore.
The patch also removes the redundant keybinding `C-x C-='.
And C-x C-0 does not allow adjusting further. My feeling is that
it is not useful.
I'll apply this patch within a week if nobody is against it.
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: face-remap.el.patch --]
[-- Type: text/x-patch, Size: 3270 bytes --]
=== modified file 'lisp/face-remap.el'
--- lisp/face-remap.el 2012-07-10 11:51:54 +0000
+++ lisp/face-remap.el 2012-09-11 13:18:59 +0000
@@ -281,22 +281,26 @@
;;;###autoload (define-key ctl-x-map [(control ?+)] 'text-scale-adjust)
;;;###autoload (define-key ctl-x-map [(control ?-)] 'text-scale-adjust)
-;;;###autoload (define-key ctl-x-map [(control ?=)] 'text-scale-adjust)
;;;###autoload (define-key ctl-x-map [(control ?0)] 'text-scale-adjust)
;;;###autoload
-(defun text-scale-adjust (inc)
- "Increase or decrease the height of the default face in the current buffer.
+(defun text-scale-adjust (inc &optional mod)
+ "Adjust the height of the default face by INC.
+
+INC may be passed as a numeric prefix argument.
+
+The optional argument MOD is used internally to pass the previous
+modifier to the command, when used repeatedly.
The actual adjustment made depends on the final component of the
-key-binding used to invoke the command, with all modifiers removed:
+keybinding used to invoke the command.
- +, = Increase the default face height by one step
+ + Increase the default face height by one step
- Decrease the default face height by one step
0 Reset the default face height to the global default
-Then, continue to read input events and further adjust the face
-height as long as the input event read (with all modifiers removed)
-is one of the above.
+After the first invokation, continue to read input events and
+further adjust the face height as long as the input event read
+is `+' or `-'.
Each step scales the height of the default face by the variable
`text-scale-mode-step' (a negative number of steps decreases the
@@ -309,30 +313,15 @@
a top-level keymap, `text-scale-increase' or
`text-scale-decrease' may be more appropriate."
(interactive "p")
- (let ((first t)
- (ev last-command-event)
- (echo-keystrokes nil))
- (let* ((base (event-basic-type ev))
- (step
- (pcase base
- ((or ?+ ?=) inc)
- (?- (- inc))
- (?0 0)
- (t inc))))
- (text-scale-increase step)
- ;; FIXME: do it after every "iteration of the loop".
- (message "+,-,0 for further adjustment: ")
- (set-temporary-overlay-map
- (let ((map (make-sparse-keymap)))
- (dolist (mods '(() (control)))
- (define-key map (vector (append mods '(?-))) 'text-scale-decrease)
- (define-key map (vector (append mods '(?+))) 'text-scale-increase)
- ;; = is unshifted + on most keyboards.
- (define-key map (vector (append mods '(?=))) 'text-scale-increase)
- (define-key map (vector (append mods '(?0)))
- (lambda () (interactive) (text-scale-increase 0))))
- map)
- t))))
+ (let* ((ev (or (event-basic-type (or mod last-command-event))))
+ (step (pcase ev (?+ inc) (?- (- inc)) (?0 0) (t inc)))
+ c)
+ (text-scale-increase step)
+ (when (and (not (zerop step))
+ (setq c (read-event "Hit + or - for further adjustment, RET to finish")))
+ (cond ((member (event-basic-type c) '(?+ ?-))
+ (text-scale-adjust (abs step) c))
+ (t (message "Done"))))))
\f
;; ----------------------------------------------------------------
[-- Attachment #3: Type: text/plain, Size: 14 bytes --]
--
Bastien
^ permalink raw reply [flat|nested] 17+ messages in thread
* bug#12345: 24.2.50; doc string of `text-scale-adjust'
2012-09-11 13:37 ` Bastien
@ 2012-09-11 13:48 ` Stefan Monnier
2012-09-11 14:24 ` Bastien
2012-09-11 17:36 ` Bastien
2012-09-11 14:24 ` Drew Adams
1 sibling, 2 replies; 17+ messages in thread
From: Stefan Monnier @ 2012-09-11 13:48 UTC (permalink / raw
To: Bastien; +Cc: 12345
> I enhanced the docstring and rewrote the command so that it does
> not use a temporary keymap.
Not using a temporary keymap means reverting to the old code: please
explain precisely why using a temporary keymap is a problem (there are
good reasons to use it: e.g. it makes key-translation-map and friends
work correctly).
Stefan
^ permalink raw reply [flat|nested] 17+ messages in thread
* bug#12345: 24.2.50; doc string of `text-scale-adjust'
2012-09-11 13:37 ` Bastien
2012-09-11 13:48 ` Stefan Monnier
@ 2012-09-11 14:24 ` Drew Adams
2012-09-11 14:53 ` Bastien
1 sibling, 1 reply; 17+ messages in thread
From: Drew Adams @ 2012-09-11 14:24 UTC (permalink / raw
To: 'Bastien'; +Cc: 12345
Hi Bastien,
1. I think any changes in the behavior and bindings should be proposed on
emacs-devel. Personally, I don't care much, but I'm pretty sure that at least
some people will want to keep the `=' binding because `+' is often on a Shift
key. Emacs-devel is also the place to pose your question about zero.
2. Please consider changing the name of the parameter to INCREMENT, so the doc
string is more readable: "Adjust the height of the default face by INCREMENT."
Say explicitly that INCREMENT defaults to 1.
3. Alternatively, you could say something like this:
"Adjust the height of face `default' by N text-scale steps.
N is the numeric prefix agument: positive to increase height, negative
to decrease. Step size is the value of `text-scale-mode-step'."
The rest is OK.
4. Don't be surprised if Stefan doesn't go along with your change to not use the
temporary keymap. He just got through _adding_ such code here and there
throughout Emacs. (Makes no difference to me - my bug report was about the doc
string.)
Thx - Drew
> > 1. Describe the parameter, INC.
> > 2. Describe the use of a prefix argument.
> > In general, describe this as a user command, from a user
> > point of view, and not just as a function to be called from code.
>
> See attached patch.
>
> I enhanced the docstring and rewrote the command so that it does
> not use a temporary keymap. When I tried `C-x C-+' I was left with
> the `+' and `-' keys not usable anymore.
>
> The patch also removes the redundant keybinding `C-x C-='.
>
> And C-x C-0 does not allow adjusting further. My feeling is that
> it is not useful.
>
> I'll apply this patch within a week if nobody is against it.
^ permalink raw reply [flat|nested] 17+ messages in thread
* bug#12345: 24.2.50; doc string of `text-scale-adjust'
2012-09-11 13:48 ` Stefan Monnier
@ 2012-09-11 14:24 ` Bastien
2012-09-11 14:39 ` Drew Adams
` (3 more replies)
2012-09-11 17:36 ` Bastien
1 sibling, 4 replies; 17+ messages in thread
From: Bastien @ 2012-09-11 14:24 UTC (permalink / raw
To: Stefan Monnier; +Cc: 12345
Stefan Monnier <monnier@iro.umontreal.ca> writes:
>> I enhanced the docstring and rewrote the command so that it does
>> not use a temporary keymap.
>
> Not using a temporary keymap means reverting to the old code: please
> explain precisely why using a temporary keymap is a problem (there are
> good reasons to use it: e.g. it makes key-translation-map and friends
> work correctly).
The `read-event' loop allows to keep the message displayed
(see the FIXME).
But I hit something weird.
from emacs -q, try to edebug-defun `text-scale-adjust',
then use `C-x C-+', then `c' in the debug loop, then quit.
The temporary keymap is not temporary anymore, and the `-'
and `+' keys are still bounded to `text-scale-adjust'.
Surely something weird when `set-temporary-overlay-map' is
called from within a debug loop?
--
Bastien
^ permalink raw reply [flat|nested] 17+ messages in thread
* bug#12345: 24.2.50; doc string of `text-scale-adjust'
2012-09-11 14:24 ` Bastien
@ 2012-09-11 14:39 ` Drew Adams
2012-09-11 16:27 ` Bastien
` (2 subsequent siblings)
3 siblings, 0 replies; 17+ messages in thread
From: Drew Adams @ 2012-09-11 14:39 UTC (permalink / raw
To: 'Bastien', 'Stefan Monnier'; +Cc: 12345
> from emacs -q, try to edebug-defun `text-scale-adjust',
> then use `C-x C-+', then `c' in the debug loop, then quit.
>
> The temporary keymap is not temporary anymore, and the `-'
> and `+' keys are still bounded to `text-scale-adjust'.
>
> Surely something weird when `set-temporary-overlay-map' is
> called from within a debug loop?
Debugging is notoriously difficult when events are read. I usually have to
resort to adding `message' calls or similar.
See also bug (regression) #12232, which similarly was changed recently to use
`set-temporary-overlay-map' (and to use lexical binding), and which since that
change leads to the error "Lisp nesting exceeds `max-lisp-eval-depth'".
No one has responded to that bug at all so far. I located the commit that
introduced the regression, but debugging it further and fixing it is beyond me.
^ permalink raw reply [flat|nested] 17+ messages in thread
* bug#12345: 24.2.50; doc string of `text-scale-adjust'
2012-09-11 14:24 ` Drew Adams
@ 2012-09-11 14:53 ` Bastien
0 siblings, 0 replies; 17+ messages in thread
From: Bastien @ 2012-09-11 14:53 UTC (permalink / raw
To: Drew Adams; +Cc: 12345
Hi Drew,
"Drew Adams" <drew.adams@oracle.com> writes:
> 1. I think any changes in the behavior and bindings should be proposed on
> emacs-devel. Personally, I don't care much, but I'm pretty sure that at least
> some people will want to keep the `=' binding because `+' is often on a Shift
> key. Emacs-devel is also the place to pose your question about zero.
Right, I will ask on emacs-devel.
> 2. Please consider changing the name of the parameter to INCREMENT, so the doc
> string is more readable: "Adjust the height of the default face by INCREMENT."
> Say explicitly that INCREMENT defaults to 1.
"INC" seems a rather standard and self-explanatory pet name for
"INCREMENT".
> 3. Alternatively, you could say something like this:
>
> "Adjust the height of face `default' by N text-scale steps.
> N is the numeric prefix agument: positive to increase height, negative
> to decrease. Step size is the value of `text-scale-mode-step'."
Yes.
> 4. Don't be surprised if Stefan doesn't go along with your change to not use the
> temporary keymap. He just got through _adding_ such code here and there
> throughout Emacs. (Makes no difference to me - my bug report was about the doc
> string.)
I've nothing against temporary keymaps -- I thought the buggy behavior
I've found and reported was the default one, so I just implemented
text-scale-adjust another way. Also, I think the (while ... read-event)
construct is a simple way to keep the message displayed. But surely
more a matter of taste than a technical point.
<Thanks for the feedback,
--
Bastien
^ permalink raw reply [flat|nested] 17+ messages in thread
* bug#12345: 24.2.50; doc string of `text-scale-adjust'
2012-09-11 14:24 ` Bastien
2012-09-11 14:39 ` Drew Adams
@ 2012-09-11 16:27 ` Bastien
2012-09-11 17:21 ` Stefan Monnier
2012-09-12 13:13 ` Stefan Monnier
3 siblings, 0 replies; 17+ messages in thread
From: Bastien @ 2012-09-11 16:27 UTC (permalink / raw
To: Stefan Monnier; +Cc: 12345
Bastien <bzg@altern.org> writes:
> from emacs -q, try to edebug-defun `text-scale-adjust',
> then use `C-x C-+', then `c' in the debug loop, then quit.
>
> The temporary keymap is not temporary anymore, and the `-'
> and `+' keys are still bounded to `text-scale-adjust'.
I've been digging a bit further: in general, using `edebug-defun'
on any command that uses `set-temporary-overlay-map' will leave the
`pre-command-hook' in a dirty state.
One brute-force solution is to (setq emulation-mode-map-alists nil)
manually to get rid of the temporary overlay map, but that's not right.
--
Bastien
^ permalink raw reply [flat|nested] 17+ messages in thread
* bug#12345: 24.2.50; doc string of `text-scale-adjust'
2012-09-11 14:24 ` Bastien
2012-09-11 14:39 ` Drew Adams
2012-09-11 16:27 ` Bastien
@ 2012-09-11 17:21 ` Stefan Monnier
2012-09-11 17:31 ` Bastien
2012-09-12 13:13 ` Stefan Monnier
3 siblings, 1 reply; 17+ messages in thread
From: Stefan Monnier @ 2012-09-11 17:21 UTC (permalink / raw
To: Bastien; +Cc: 12345
> from emacs -q, try to edebug-defun `text-scale-adjust',
> then use `C-x C-+', then `c' in the debug loop, then quit.
> The temporary keymap is not temporary anymore, and the `-'
> and `+' keys are still bounded to `text-scale-adjust'.
Can you the patch below?
Stefan
=== modified file 'lisp/subr.el'
--- lisp/subr.el 2012-09-07 10:19:58 +0000
+++ lisp/subr.el 2012-09-11 17:20:45 +0000
@@ -3898,6 +3898,7 @@
(lookup-key ',map
(this-command-keys-vector))))
(t `(funcall ',keep-pred)))
+ (set ',overlaysym nil)
(remove-hook 'pre-command-hook ',clearfunsym)
(setq emulation-mode-map-alists
(delq ',alist emulation-mode-map-alists))))))
^ permalink raw reply [flat|nested] 17+ messages in thread
* bug#12345: 24.2.50; doc string of `text-scale-adjust'
2012-09-11 17:21 ` Stefan Monnier
@ 2012-09-11 17:31 ` Bastien
0 siblings, 0 replies; 17+ messages in thread
From: Bastien @ 2012-09-11 17:31 UTC (permalink / raw
To: Stefan Monnier; +Cc: 12345
Stefan Monnier <monnier@IRO.UMontreal.CA> writes:
>> from emacs -q, try to edebug-defun `text-scale-adjust',
>> then use `C-x C-+', then `c' in the debug loop, then quit.
>> The temporary keymap is not temporary anymore, and the `-'
>> and `+' keys are still bounded to `text-scale-adjust'.
>
> Can you the patch below?
I tested it and it does not work for me.
--
Bastien
^ permalink raw reply [flat|nested] 17+ messages in thread
* bug#12345: 24.2.50; doc string of `text-scale-adjust'
2012-09-11 13:48 ` Stefan Monnier
2012-09-11 14:24 ` Bastien
@ 2012-09-11 17:36 ` Bastien
2012-10-26 17:12 ` Stefan Monnier
1 sibling, 1 reply; 17+ messages in thread
From: Bastien @ 2012-09-11 17:36 UTC (permalink / raw
To: Stefan Monnier; +Cc: 12345
[-- Attachment #1: Type: text/plain, Size: 890 bytes --]
Stefan Monnier <monnier@iro.umontreal.ca> writes:
>> I enhanced the docstring and rewrote the command so that it does
>> not use a temporary keymap.
>
> Not using a temporary keymap means reverting to the old code: please
> explain precisely why using a temporary keymap is a problem (there are
> good reasons to use it: e.g. it makes key-translation-map and friends
> work correctly).
Here is another patch, using ̀set-temporary-overlay-map'.
It fixes the problem with the message disappearing.
It fixed another problem: the fact that in the current version,
INC is always 1 when using the command repeatedly, as we would
expect
C-u 4 C-x C-+ +
to increase by INC = 4 then again by INC = 4 again -- right now
it increase by INC = 4 on the first hit, then INC = 1 on the
second.
It also changes the behavior regarding C-x C-0, which ends
the loop.
Let me know what you think,
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: face-remap.el.2.patch --]
[-- Type: text/x-patch, Size: 2879 bytes --]
=== modified file 'lisp/face-remap.el'
--- lisp/face-remap.el 2012-07-10 11:51:54 +0000
+++ lisp/face-remap.el 2012-09-11 17:20:16 +0000
@@ -285,7 +285,9 @@
;;;###autoload (define-key ctl-x-map [(control ?0)] 'text-scale-adjust)
;;;###autoload
(defun text-scale-adjust (inc)
- "Increase or decrease the height of the default face in the current buffer.
+ "Adjust the height of the default face by INC.
+
+INC may be passed as a numeric prefix argument.
The actual adjustment made depends on the final component of the
key-binding used to invoke the command, with all modifiers removed:
@@ -294,9 +296,11 @@
- Decrease the default face height by one step
0 Reset the default face height to the global default
-Then, continue to read input events and further adjust the face
-height as long as the input event read (with all modifiers removed)
-is one of the above.
+When adjusting with `+' or `-', continue to read input events and
+further adjust the face height as long as the input event read
+\(with all modifiers removed) is `+' or `-'.
+
+When adjusting with `0', immediately finish.
Each step scales the height of the default face by the variable
`text-scale-mode-step' (a negative number of steps decreases the
@@ -309,8 +313,7 @@
a top-level keymap, `text-scale-increase' or
`text-scale-decrease' may be more appropriate."
(interactive "p")
- (let ((first t)
- (ev last-command-event)
+ (let ((ev last-command-event)
(echo-keystrokes nil))
(let* ((base (event-basic-type ev))
(step
@@ -320,23 +323,16 @@
(?0 0)
(t inc))))
(text-scale-increase step)
- ;; FIXME: do it after every "iteration of the loop".
- (message "+,-,0 for further adjustment: ")
- (set-temporary-overlay-map
- (let ((map (make-sparse-keymap)))
- (dolist (mods '(() (control)))
- (define-key map (vector (append mods '(?-))) 'text-scale-decrease)
- (define-key map (vector (append mods '(?+))) 'text-scale-increase)
- ;; = is unshifted + on most keyboards.
- (define-key map (vector (append mods '(?=))) 'text-scale-increase)
- (define-key map (vector (append mods '(?0)))
- (lambda () (interactive) (text-scale-increase 0))))
- map)
- t))))
-
-\f
-;; ----------------------------------------------------------------
-;; buffer-face-mode
+ (unless (zerop step)
+ (message "Use + or - for further adjustment")
+ (set-temporary-overlay-map
+ (let ((map (make-sparse-keymap)))
+ (dolist (mods '(() (control)))
+ (dolist (key '(?- ?+ ?=))
+ (define-key map (vector (append mods (list key)))
+ `(lambda () (interactive) (text-scale-adjust (abs ,step))))))
+ map)
+ t)))))
(defcustom buffer-face-mode-face 'variable-pitch
"The face specification used by `buffer-face-mode'.
[-- Attachment #3: Type: text/plain, Size: 14 bytes --]
--
Bastien
^ permalink raw reply [flat|nested] 17+ messages in thread
* bug#12345: 24.2.50; doc string of `text-scale-adjust'
2012-09-11 14:24 ` Bastien
` (2 preceding siblings ...)
2012-09-11 17:21 ` Stefan Monnier
@ 2012-09-12 13:13 ` Stefan Monnier
2012-09-12 13:52 ` Bastien
2012-09-12 14:16 ` Drew Adams
3 siblings, 2 replies; 17+ messages in thread
From: Stefan Monnier @ 2012-09-12 13:13 UTC (permalink / raw
To: Bastien; +Cc: 12345
> from emacs -q, try to edebug-defun `text-scale-adjust',
> then use `C-x C-+', then `c' in the debug loop, then quit.
> The temporary keymap is not temporary anymore, and the `-'
> and `+' keys are still bounded to `text-scale-adjust'.
There was a bug in edebug.el's handling of pre/post-command-hook.
I just fixed it and it fixes your above recipe.
Thanks for that recipe, BTW.
Stefan "haven't looked at your patch yet, sorry"
^ permalink raw reply [flat|nested] 17+ messages in thread
* bug#12345: 24.2.50; doc string of `text-scale-adjust'
2012-09-12 13:13 ` Stefan Monnier
@ 2012-09-12 13:52 ` Bastien
2012-09-12 14:16 ` Drew Adams
1 sibling, 0 replies; 17+ messages in thread
From: Bastien @ 2012-09-12 13:52 UTC (permalink / raw
To: Stefan Monnier; +Cc: 12345
Stefan Monnier <monnier@iro.umontreal.ca> writes:
>> from emacs -q, try to edebug-defun `text-scale-adjust',
>> then use `C-x C-+', then `c' in the debug loop, then quit.
>> The temporary keymap is not temporary anymore, and the `-'
>> and `+' keys are still bounded to `text-scale-adjust'.
>
> There was a bug in edebug.el's handling of pre/post-command-hook.
> I just fixed it and it fixes your above recipe.
> Thanks for that recipe, BTW.
Glad I could help.
> Stefan "haven't looked at your patch yet, sorry"
Nothing urgent at all,
--
Bastien
^ permalink raw reply [flat|nested] 17+ messages in thread
* bug#12345: 24.2.50; doc string of `text-scale-adjust'
2012-09-12 13:13 ` Stefan Monnier
2012-09-12 13:52 ` Bastien
@ 2012-09-12 14:16 ` Drew Adams
2012-09-13 3:18 ` Stefan Monnier
1 sibling, 1 reply; 17+ messages in thread
From: Drew Adams @ 2012-09-12 14:16 UTC (permalink / raw
To: 'Stefan Monnier', 'Bastien'; +Cc: 12345
> > from emacs -q, try to edebug-defun `text-scale-adjust',
> > then use `C-x C-+', then `c' in the debug loop, then quit.
> > The temporary keymap is not temporary anymore, and the `-'
> > and `+' keys are still bounded to `text-scale-adjust'.
>
> There was a bug in edebug.el's handling of pre/post-command-hook.
> I just fixed it and it fixes your above recipe.
Do you think that fix might also help with bug #12232?
That would be great.
^ permalink raw reply [flat|nested] 17+ messages in thread
* bug#12345: 24.2.50; doc string of `text-scale-adjust'
2012-09-12 14:16 ` Drew Adams
@ 2012-09-13 3:18 ` Stefan Monnier
0 siblings, 0 replies; 17+ messages in thread
From: Stefan Monnier @ 2012-09-13 3:18 UTC (permalink / raw
To: Drew Adams; +Cc: 'Bastien', 12345
> Do you think that fix might also help with bug #12232?
No, my fix only touches edebug.el which isn't even loaded in
your examples.
Sefan
^ permalink raw reply [flat|nested] 17+ messages in thread
* bug#12345: 24.2.50; doc string of `text-scale-adjust'
2012-09-11 17:36 ` Bastien
@ 2012-10-26 17:12 ` Stefan Monnier
2012-10-27 6:11 ` Bastien
0 siblings, 1 reply; 17+ messages in thread
From: Stefan Monnier @ 2012-10-26 17:12 UTC (permalink / raw
To: Bastien; +Cc: 12345-done
> Here is another patch, using ̀set-temporary-overlay-map'.
Thanks, I installed it with a few tweaks.
> It also changes the behavior regarding C-x C-0, which ends
> the loop.
I did not include this change. I'm not really opposed to it, except for
the fact that it makes it necessary to have (and remember) the C-x C-0
binding, whereas I like to use C-x C-+ as "entry point" even if I don't
actually want to increase the text size but instead reset it to its
default or decrease it.
Stefan
^ permalink raw reply [flat|nested] 17+ messages in thread
* bug#12345: 24.2.50; doc string of `text-scale-adjust'
2012-10-26 17:12 ` Stefan Monnier
@ 2012-10-27 6:11 ` Bastien
0 siblings, 0 replies; 17+ messages in thread
From: Bastien @ 2012-10-27 6:11 UTC (permalink / raw
To: Stefan Monnier; +Cc: 12345-done
Stefan Monnier <monnier@iro.umontreal.ca> writes:
>> Here is another patch, using ̀set-temporary-overlay-map'.
>
> Thanks, I installed it with a few tweaks.
Thanks,
>> It also changes the behavior regarding C-x C-0, which ends
>> the loop.
>
> I did not include this change. I'm not really opposed to it, except for
> the fact that it makes it necessary to have (and remember) the C-x C-0
> binding, whereas I like to use C-x C-+ as "entry point" even if I don't
> actually want to increase the text size but instead reset it to its
> default or decrease it.
Yes, I also think it's better like this.
--
Bastien
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2012-10-27 6:11 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-09-04 2:54 bug#12345: 24.2.50; doc string of `text-scale-adjust' Drew Adams
2012-09-11 13:37 ` Bastien
2012-09-11 13:48 ` Stefan Monnier
2012-09-11 14:24 ` Bastien
2012-09-11 14:39 ` Drew Adams
2012-09-11 16:27 ` Bastien
2012-09-11 17:21 ` Stefan Monnier
2012-09-11 17:31 ` Bastien
2012-09-12 13:13 ` Stefan Monnier
2012-09-12 13:52 ` Bastien
2012-09-12 14:16 ` Drew Adams
2012-09-13 3:18 ` Stefan Monnier
2012-09-11 17:36 ` Bastien
2012-10-26 17:12 ` Stefan Monnier
2012-10-27 6:11 ` Bastien
2012-09-11 14:24 ` Drew Adams
2012-09-11 14:53 ` Bastien
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.