* An issue with org-agenda-todo-list-sublevels
@ 2015-12-10 23:26 Marcin Borkowski
2015-12-12 8:53 ` Nicolas Goaziou
0 siblings, 1 reply; 8+ messages in thread
From: Marcin Borkowski @ 2015-12-10 23:26 UTC (permalink / raw
To: Org-Mode mailing list
Hi list,
I have org-agenda-todo-list-sublevels set to nil. However, given this
tree:
* DONE task
** TODO subtask
it turns out that the todo list in the agenda shows the "subtask" anyway.
Should it be so? I would guess not.
The reason I'd like to exclude this "subtask" from displaying is
something like this: assume that I have a project, halfway done, which
must be postponed for some reason. I'd like to be able to do this:
* SOMEDAY cool project
** DONE preparation
** TODO hard work
where SOMEDAY is a done-type keyword.
And of course, I don't want to be bothered by "hard work" in this case
in my global todo list.
Is there a way to achieve this?
(Org-mode version 8.3beta (release_8.3beta-1136-g0e7062).)
If not, can it be considered a feature request?
A cursory examination of org-agenda.el shows that the culprit is the
function org-agenda-get-todos, and that (probably) this is responsible:
--8<---------------cut here---------------start------------->8---
(regexp (format org-heading-keyword-regexp-format
(cond
((and org-select-this-todo-keyword
(equal org-select-this-todo-keyword "*"))
org-todo-regexp)
(org-select-this-todo-keyword
(concat "\\("
(mapconcat 'identity
(org-split-string
org-select-this-todo-keyword
"|")
"\\|") "\\)"))
(t org-not-done-regexp))))
--8<---------------cut here---------------end--------------->8---
(notice the last line, with `org-not-done-regexp'!)
A possible course of action might be to change that line to use
`org-todo-regexp'; OTOH, the exclusion of tasks marked as done should be
then done differently.
(If there is any interest, I might try to look into it further.)
Best,
--
Marcin Borkowski
http://octd.wmi.amu.edu.pl/en/Marcin_Borkowski
Faculty of Mathematics and Computer Science
Adam Mickiewicz University
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: An issue with org-agenda-todo-list-sublevels
2015-12-10 23:26 An issue with org-agenda-todo-list-sublevels Marcin Borkowski
@ 2015-12-12 8:53 ` Nicolas Goaziou
2015-12-12 11:00 ` Marcin Borkowski
0 siblings, 1 reply; 8+ messages in thread
From: Nicolas Goaziou @ 2015-12-12 8:53 UTC (permalink / raw
To: Marcin Borkowski; +Cc: Org-Mode mailing list
Hello,
Marcin Borkowski <mbork@mbork.pl> writes:
> I have org-agenda-todo-list-sublevels set to nil. However, given this
> tree:
>
> * DONE task
> ** TODO subtask
>
> it turns out that the todo list in the agenda shows the "subtask" anyway.
>
> Should it be so? I would guess not.
It's not clear to to me it shouldn't be the case. AFAIU, the point of
`org-agenda-todo-list-sublevels' is not to skip TODO entries but to
limit the tasks you can process at a time.
> The reason I'd like to exclude this "subtask" from displaying is
> something like this: assume that I have a project, halfway done, which
> must be postponed for some reason. I'd like to be able to do this:
>
> * SOMEDAY cool project
> ** DONE preparation
> ** TODO hard work
>
> where SOMEDAY is a done-type keyword.
>
> And of course, I don't want to be bothered by "hard work" in this case
> in my global todo list.
>
> Is there a way to achieve this?
You can use a dedicated function in `org-agenda-skip-function' for that
(e.g., ignore task if one of its parents is a done task).
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: An issue with org-agenda-todo-list-sublevels
2015-12-12 8:53 ` Nicolas Goaziou
@ 2015-12-12 11:00 ` Marcin Borkowski
2015-12-14 19:17 ` Marcin Borkowski
0 siblings, 1 reply; 8+ messages in thread
From: Marcin Borkowski @ 2015-12-12 11:00 UTC (permalink / raw
To: Nicolas Goaziou; +Cc: Org-Mode mailing list
On 2015-12-12, at 09:53, Nicolas Goaziou <mail@nicolasgoaziou.fr> wrote:
> Hello,
>
> Marcin Borkowski <mbork@mbork.pl> writes:
>
>> I have org-agenda-todo-list-sublevels set to nil. However, given this
>> tree:
>>
>> * DONE task
>> ** TODO subtask
>>
>> it turns out that the todo list in the agenda shows the "subtask" anyway.
>>
>> Should it be so? I would guess not.
>
> It's not clear to to me it shouldn't be the case. AFAIU, the point of
> `org-agenda-todo-list-sublevels' is not to skip TODO entries but to
> limit the tasks you can process at a time.
I see.
>> The reason I'd like to exclude this "subtask" from displaying is
>> something like this: assume that I have a project, halfway done, which
>> must be postponed for some reason. I'd like to be able to do this:
>>
>> * SOMEDAY cool project
>> ** DONE preparation
>> ** TODO hard work
>>
>> where SOMEDAY is a done-type keyword.
>>
>> And of course, I don't want to be bothered by "hard work" in this case
>> in my global todo list.
>>
>> Is there a way to achieve this?
>
> You can use a dedicated function in `org-agenda-skip-function' for that
> (e.g., ignore task if one of its parents is a done task).
Wow, thanks, I didn't know about it. Now that I look into this, should
I use `org-agenda-skip-function' or `org-agenda-skip-function-global'?
Also, how do I check whether one of the parents is done? I know how to
climb through the hierarchy of headlines, how do I get the TODO keyword?
Is `org-get-todo-state' the right function to do that?
Now that I think of it, maybe I should use a tag for that (like
:project: or something). I'll have to think about it.
> Regards,
Best,
--
Marcin Borkowski
http://octd.wmi.amu.edu.pl/en/Marcin_Borkowski
Faculty of Mathematics and Computer Science
Adam Mickiewicz University
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: An issue with org-agenda-todo-list-sublevels
2015-12-12 11:00 ` Marcin Borkowski
@ 2015-12-14 19:17 ` Marcin Borkowski
2015-12-14 20:48 ` Nick Dokos
0 siblings, 1 reply; 8+ messages in thread
From: Marcin Borkowski @ 2015-12-14 19:17 UTC (permalink / raw
To: Nicolas Goaziou; +Cc: Org-Mode mailing list
> On 2015-12-12, at 09:53, Nicolas Goaziou <mail@nicolasgoaziou.fr> wrote:
>
>> You can use a dedicated function in `org-agenda-skip-function' for that
>> (e.g., ignore task if one of its parents is a done task).
OK, so it doesn't work (probably because I'm doing something wrong...)
I did this:
--8<---------------cut here---------------start------------->8---
(defun mbork/org-agenda-skip-if-parent-done ()
"Return t if any of the parents of the current entry is a DONE
item."
(save-excursion
(catch 'done
(while (org-up-heading-safe)
(if (org-entry-is-done-p)
(throw 'done t))))))
(setq org-agenda-custom-commands
'(("n"
"Agenda and TODOs"
((agenda "")
(alltodo "" ((org-agenda-skip-function #'mbork/org-agenda-skip-if-parent-done)))))))
--8<---------------cut here---------------end--------------->8---
and I see this:
--8<---------------cut here---------------start------------->8---
and: Wrong type argument: integer-or-marker-p, t
--8<---------------cut here---------------end--------------->8---
What may be the problem? How do I even debug this?
Best,
--
Marcin Borkowski
http://octd.wmi.amu.edu.pl/en/Marcin_Borkowski
Faculty of Mathematics and Computer Science
Adam Mickiewicz University
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: An issue with org-agenda-todo-list-sublevels
2015-12-14 19:17 ` Marcin Borkowski
@ 2015-12-14 20:48 ` Nick Dokos
2015-12-15 23:33 ` Marcin Borkowski
0 siblings, 1 reply; 8+ messages in thread
From: Nick Dokos @ 2015-12-14 20:48 UTC (permalink / raw
To: emacs-orgmode
Marcin Borkowski <mbork@mbork.pl> writes:
>> On 2015-12-12, at 09:53, Nicolas Goaziou <mail@nicolasgoaziou.fr> wrote:
>>
>>> You can use a dedicated function in `org-agenda-skip-function' for that
>>> (e.g., ignore task if one of its parents is a done task).
>
> OK, so it doesn't work (probably because I'm doing something wrong...)
>
> I did this:
>
> (defun mbork/org-agenda-skip-if-parent-done ()
> "Return t if any of the parents of the current entry is a DONE
> item."
> (save-excursion
> (catch 'done
> (while (org-up-heading-safe)
> (if (org-entry-is-done-p)
> (throw 'done t))))))
>
> (setq org-agenda-custom-commands
> '(("n"
> "Agenda and TODOs"
> ((agenda "")
> (alltodo "" ((org-agenda-skip-function #'mbork/org-agenda-skip-if-parent-done)))))))
>
> and I see this:
>
> and: Wrong type argument: integer-or-marker-p, t
>
> What may be the problem? How do I even debug this?
>
Are you testing it with emacs -q -l /path/to/min/org-init.el?
If not, you probably should: I don't get any errors with the
stuff above in my minimal org file, which leads me to suspect
it's something in (the rest of) your configuration.
--
Nick
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: An issue with org-agenda-todo-list-sublevels
2015-12-14 20:48 ` Nick Dokos
@ 2015-12-15 23:33 ` Marcin Borkowski
2015-12-16 1:54 ` Nick Dokos
0 siblings, 1 reply; 8+ messages in thread
From: Marcin Borkowski @ 2015-12-15 23:33 UTC (permalink / raw
To: Nick Dokos; +Cc: emacs-orgmode
On 2015-12-14, at 21:48, Nick Dokos <ndokos@gmail.com> wrote:
> Marcin Borkowski <mbork@mbork.pl> writes:
>
>>> On 2015-12-12, at 09:53, Nicolas Goaziou <mail@nicolasgoaziou.fr> wrote:
>>>
>>>> You can use a dedicated function in `org-agenda-skip-function' for that
>>>> (e.g., ignore task if one of its parents is a done task).
>>
>> OK, so it doesn't work (probably because I'm doing something wrong...)
>>
>> I did this:
>>
>> (defun mbork/org-agenda-skip-if-parent-done ()
>> "Return t if any of the parents of the current entry is a DONE
>> item."
>> (save-excursion
>> (catch 'done
>> (while (org-up-heading-safe)
>> (if (org-entry-is-done-p)
>> (throw 'done t))))))
>>
>> (setq org-agenda-custom-commands
>> '(("n"
>> "Agenda and TODOs"
>> ((agenda "")
>> (alltodo "" ((org-agenda-skip-function #'mbork/org-agenda-skip-if-parent-done)))))))
>>
>> and I see this:
>>
>> and: Wrong type argument: integer-or-marker-p, t
>>
>> What may be the problem? How do I even debug this?
>>
>
> Are you testing it with emacs -q -l /path/to/min/org-init.el?
> If not, you probably should: I don't get any errors with the
> stuff above in my minimal org file, which leads me to suspect
> it's something in (the rest of) your configuration.
Strange. I have the same error even with emacs -q, with minimal Org
config - the above function and one simple agenda file, containing this:
* DONE done
** TODO todo
Org-mode version 8.2.10 (release_8.2.10 @ /usr/local/share/emacs/25.0.50/lisp/org/)
Any hints?
Here's the debugger output:
--8<---------------cut here---------------start------------->8---
Debugger entered--Lisp error: (wrong-type-argument integer-or-marker-p t)
goto-char(t)
(and (setq to (or (org-agenda-skip-eval org-agenda-skip-function-global) (org-agenda-skip-eval org-agenda-skip-function))) (goto-char to))
(or (save-excursion (goto-char p) (looking-at comment-start-skip)) (and org-agenda-skip-archived-trees (not org-agenda-archives-mode) (get-text-property p :org-archived) (org-end-of-subtree t)) (and org-agenda-skip-comment-trees (get-text-property p :org-comment) (org-end-of-subtree t)) (and (setq to (or (org-agenda-skip-eval org-agenda-skip-function-global) (org-agenda-skip-eval org-agenda-skip-function))) (goto-char to)) (org-in-src-block-p t))
(if (or (save-excursion (goto-char p) (looking-at comment-start-skip)) (and org-agenda-skip-archived-trees (not org-agenda-archives-mode) (get-text-property p :org-archived) (org-end-of-subtree t)) (and org-agenda-skip-comment-trees (get-text-property p :org-comment) (org-end-of-subtree t)) (and (setq to (or (org-agenda-skip-eval org-agenda-skip-function-global) (org-agenda-skip-eval org-agenda-skip-function))) (goto-char to)) (org-in-src-block-p t)) (progn (throw :skip t)))
(let ((p (point-at-bol)) to) (if (or (save-excursion (goto-char p) (looking-at comment-start-skip)) (and org-agenda-skip-archived-trees (not org-agenda-archives-mode) (get-text-property p :org-archived) (org-end-of-subtree t)) (and org-agenda-skip-comment-trees (get-text-property p :org-comment) (org-end-of-subtree t)) (and (setq to (or (org-agenda-skip-eval org-agenda-skip-function-global) (org-agenda-skip-eval org-agenda-skip-function))) (goto-char to)) (org-in-src-block-p t)) (progn (throw :skip t))))
org-agenda-skip()
org-agenda-get-todos()
org-agenda-get-day-entries("/home/mbork/org/emacs.org" (12 16 2015) :todo)
org-todo-list(nil)
funcall-interactively(org-todo-list nil)
call-interactively(org-todo-list)
(let ((org-agenda-skip-function (function mbork/org-agenda-skip-if-parent-done))) (call-interactively (quote org-todo-list)))
(let nil (let ((org-agenda-skip-function (function mbork/org-agenda-skip-if-parent-done))) (call-interactively (quote org-todo-list))))
eval((let nil (let ((org-agenda-skip-function (function mbork/org-agenda-skip-if-parent-done))) (call-interactively (quote org-todo-list)))))
org-let2(nil ((org-agenda-skip-function (function mbork/org-agenda-skip-if-parent-done))) (call-interactively (quote org-todo-list)))
org-agenda-run-series("Agenda and TODOs" (((agenda "") (alltodo "" ((org-agenda-skip-function (function mbork/org-agenda-skip-if-parent-done)))))))
org-agenda(nil)
funcall-interactively(org-agenda nil)
call-interactively(org-agenda nil nil)
command-execute(org-agenda)
--8<---------------cut here---------------end--------------->8---
--
Marcin Borkowski
http://octd.wmi.amu.edu.pl/en/Marcin_Borkowski
Faculty of Mathematics and Computer Science
Adam Mickiewicz University
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: An issue with org-agenda-todo-list-sublevels
2015-12-15 23:33 ` Marcin Borkowski
@ 2015-12-16 1:54 ` Nick Dokos
2015-12-16 8:20 ` Marcin Borkowski
0 siblings, 1 reply; 8+ messages in thread
From: Nick Dokos @ 2015-12-16 1:54 UTC (permalink / raw
To: emacs-orgmode
Marcin Borkowski <mbork@mbork.pl> writes:
> On 2015-12-14, at 21:48, Nick Dokos <ndokos@gmail.com> wrote:
>
>> Marcin Borkowski <mbork@mbork.pl> writes:
>>
>>>> On 2015-12-12, at 09:53, Nicolas Goaziou <mail@nicolasgoaziou.fr> wrote:
>>>>
>>>>> You can use a dedicated function in `org-agenda-skip-function' for that
>>>>> (e.g., ignore task if one of its parents is a done task).
>>>
>>> OK, so it doesn't work (probably because I'm doing something wrong...)
>>>
>>> I did this:
>>>
>>> (defun mbork/org-agenda-skip-if-parent-done ()
>>> "Return t if any of the parents of the current entry is a DONE
>>> item."
>>> (save-excursion
>>> (catch 'done
>>> (while (org-up-heading-safe)
>>> (if (org-entry-is-done-p)
>>> (throw 'done t))))))
>>>
>>> (setq org-agenda-custom-commands
>>> '(("n"
>>> "Agenda and TODOs"
>>> ((agenda "")
>>> (alltodo "" ((org-agenda-skip-function #'mbork/org-agenda-skip-if-parent-done)))))))
>>>
>>> and I see this:
>>>
>>> and: Wrong type argument: integer-or-marker-p, t
>>>
>>> What may be the problem? How do I even debug this?
>>>
>>
>> Are you testing it with emacs -q -l /path/to/min/org-init.el?
>> If not, you probably should: I don't get any errors with the
>> stuff above in my minimal org file, which leads me to suspect
>> it's something in (the rest of) your configuration.
>
> Strange. I have the same error even with emacs -q, with minimal Org
> config - the above function and one simple agenda file, containing this:
>
> * DONE done
> ** TODO todo
>
> Org-mode version 8.2.10 (release_8.2.10 @ /usr/local/share/emacs/25.0.50/lisp/org/)
>
> Any hints?
>
> Here's the debugger output:
>
> Debugger entered--Lisp error: (wrong-type-argument integer-or-marker-p t)
> goto-char(t)
> (and (setq to (or (org-agenda-skip-eval org-agenda-skip-function-global) (org-agenda-skip-eval org-agenda-skip-function))) (goto-char to))
Not so strange: I probably did not hit the (throw 'done t) in your
function. The spec says that the function has to return a position
in the buffer:
,----
| org-agenda-skip-function is a variable defined in ‘org-agenda.el’.
| Its value is nil
|
| This variable may be risky if used as a file-local variable.
|
| Documentation:
| Function to be called at each match during agenda construction.
| If this function returns nil, the current match should not be skipped.
| Otherwise, the function must return a position from where the search
| should be continued.
`----
--
Nick
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: An issue with org-agenda-todo-list-sublevels
2015-12-16 1:54 ` Nick Dokos
@ 2015-12-16 8:20 ` Marcin Borkowski
0 siblings, 0 replies; 8+ messages in thread
From: Marcin Borkowski @ 2015-12-16 8:20 UTC (permalink / raw
To: Nick Dokos; +Cc: emacs-orgmode
On 2015-12-16, at 02:54, Nick Dokos <ndokos@gmail.com> wrote:
> Marcin Borkowski <mbork@mbork.pl> writes:
>
>> On 2015-12-14, at 21:48, Nick Dokos <ndokos@gmail.com> wrote:
>>
>>> Marcin Borkowski <mbork@mbork.pl> writes:
>>>
>>>>> On 2015-12-12, at 09:53, Nicolas Goaziou <mail@nicolasgoaziou.fr> wrote:
>>>>>
>>>>>> You can use a dedicated function in `org-agenda-skip-function' for that
>>>>>> (e.g., ignore task if one of its parents is a done task).
>>>>
>>>> OK, so it doesn't work (probably because I'm doing something wrong...)
>>>>
>>>> I did this:
>>>>
>>>> (defun mbork/org-agenda-skip-if-parent-done ()
>>>> "Return t if any of the parents of the current entry is a DONE
>>>> item."
>>>> (save-excursion
>>>> (catch 'done
>>>> (while (org-up-heading-safe)
>>>> (if (org-entry-is-done-p)
>>>> (throw 'done t))))))
>>>>
>>>> (setq org-agenda-custom-commands
>>>> '(("n"
>>>> "Agenda and TODOs"
>>>> ((agenda "")
>>>> (alltodo "" ((org-agenda-skip-function #'mbork/org-agenda-skip-if-parent-done)))))))
>>>>
>>>> and I see this:
>>>>
>>>> and: Wrong type argument: integer-or-marker-p, t
>>>>
>>>> What may be the problem? How do I even debug this?
>>>>
>>>
>>> Are you testing it with emacs -q -l /path/to/min/org-init.el?
>>> If not, you probably should: I don't get any errors with the
>>> stuff above in my minimal org file, which leads me to suspect
>>> it's something in (the rest of) your configuration.
>>
>> Strange. I have the same error even with emacs -q, with minimal Org
>> config - the above function and one simple agenda file, containing this:
>>
>> * DONE done
>> ** TODO todo
>>
>> Org-mode version 8.2.10 (release_8.2.10 @ /usr/local/share/emacs/25.0.50/lisp/org/)
>>
>> Any hints?
>>
>> Here's the debugger output:
>>
>> Debugger entered--Lisp error: (wrong-type-argument integer-or-marker-p t)
>> goto-char(t)
>> (and (setq to (or (org-agenda-skip-eval org-agenda-skip-function-global) (org-agenda-skip-eval org-agenda-skip-function))) (goto-char to))
>
> Not so strange: I probably did not hit the (throw 'done t) in your
> function. The spec says that the function has to return a position
> in the buffer:
>
> ,----
> | org-agenda-skip-function is a variable defined in ‘org-agenda.el’.
> | Its value is nil
> |
> | This variable may be risky if used as a file-local variable.
> |
> | Documentation:
> | Function to be called at each match during agenda construction.
> | If this function returns nil, the current match should not be skipped.
> | Otherwise, the function must return a position from where the search
> | should be continued.
> `----
Stupid me. Thanks.
--
Marcin Borkowski
http://octd.wmi.amu.edu.pl/en/Marcin_Borkowski
Faculty of Mathematics and Computer Science
Adam Mickiewicz University
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2015-12-16 8:20 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-12-10 23:26 An issue with org-agenda-todo-list-sublevels Marcin Borkowski
2015-12-12 8:53 ` Nicolas Goaziou
2015-12-12 11:00 ` Marcin Borkowski
2015-12-14 19:17 ` Marcin Borkowski
2015-12-14 20:48 ` Nick Dokos
2015-12-15 23:33 ` Marcin Borkowski
2015-12-16 1:54 ` Nick Dokos
2015-12-16 8:20 ` Marcin Borkowski
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.