* preview and default class [8.2.5h (release_8.2.5h-677-g55b0a3 @ /home/youngfrog/sourcetrees/org-mode/lisp/)] @ 2014-03-06 12:47 Nicolas Richard 2014-03-13 14:26 ` Bastien 0 siblings, 1 reply; 11+ messages in thread From: Nicolas Richard @ 2014-03-06 12:47 UTC (permalink / raw) To: emacs-orgmode Hello, I was a little bit surprised that previewing latex fragments doesn't use the same class as latex export. That's contrary to my expectation but I don't know how to fix it. The reason I expected that is : I set a default (personnal) latex class which defines many commands that I use everyday when writing latex, and thus also when writing latex in org documents. Also, it took me a lot of time to find out that org-format-latex-header was used for previewing latex fragments. I suggest that we mention it in the manual in (info "(org) Previewing LaTeX fragments"). It's already mentionned in (info "(org) LaTeX fragments") in a footnote, but I think the variable must be found in the "Previewing" section too. Here's a patch to do it, but maybe the whole footnote should be moved to the "Previewing" section instead ? From: Nicolas Richard <theonewiththeevillook@yahoo.fr> Date: Thu, 6 Mar 2014 13:21:41 +0100 Subject: [PATCH] * doc/org.texi: mention org-format-latex-header near org-format-latex-options --- doc/org.texi | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/doc/org.texi b/doc/org.texi index 7e66034..b85f8c0 100644 --- a/doc/org.texi +++ b/doc/org.texi @@ -10228,10 +10228,11 @@ Remove the overlay preview images. @end table @vindex org-format-latex-options -You can customize the variable @code{org-format-latex-options} to influence -some aspects of the preview. In particular, the @code{:scale} (and for HTML -export, @code{:html-scale}) property can be used to adjust the size of the -preview images. +@vindex org-format-latex-header +You can customize the variables @code{org-format-latex-options} and +@code{org-format-latex-header} to influence some aspects of the preview. In +particular, the @code{:scale} (and for HTML export, @code{:html-scale}) +property of the former can be used to adjust the size of the preview images. @vindex org-startup-with-latex-preview You can turn on the previewing of all @LaTeX{} fragments in a file with -- 1.8.5.2 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: preview and default class [8.2.5h (release_8.2.5h-677-g55b0a3 @ /home/youngfrog/sourcetrees/org-mode/lisp/)] 2014-03-06 12:47 preview and default class [8.2.5h (release_8.2.5h-677-g55b0a3 @ /home/youngfrog/sourcetrees/org-mode/lisp/)] Nicolas Richard @ 2014-03-13 14:26 ` Bastien 2014-03-19 22:22 ` Nicolas Richard 0 siblings, 1 reply; 11+ messages in thread From: Bastien @ 2014-03-13 14:26 UTC (permalink / raw) To: Nicolas Richard; +Cc: emacs-orgmode Hi Nicolas, Nicolas Richard <theonewiththeevillook@yahoo.fr> writes: > Also, it took me a lot of time to find out that org-format-latex-header > was used for previewing latex fragments. I suggest that we mention it in > the manual in (info "(org) Previewing LaTeX fragments"). It's already > mentionned in (info "(org) LaTeX fragments") in a footnote, but I think > the variable must be found in the "Previewing" section too. Agreed. > Here's a patch to do it, but maybe the whole footnote should be moved to > the "Previewing" section instead ? Mhh, yes, I'm for moving it to the previewing section. Do you want to get commit access so that you can fix this directly? Otherwise, just send a patch and I'll apply it. Thanks! -- Bastien ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: preview and default class [8.2.5h (release_8.2.5h-677-g55b0a3 @ /home/youngfrog/sourcetrees/org-mode/lisp/)] 2014-03-13 14:26 ` Bastien @ 2014-03-19 22:22 ` Nicolas Richard 2014-03-20 10:55 ` Bastien 0 siblings, 1 reply; 11+ messages in thread From: Nicolas Richard @ 2014-03-19 22:22 UTC (permalink / raw) To: Bastien; +Cc: Nicolas Richard, emacs-orgmode Hi Bastien, > Mhh, yes, I'm for moving it to the previewing section. > > Do you want to get commit access so that you can fix this directly? > Otherwise, just send a patch and I'll apply it. > > Thanks! Here's a patch. I can commit it if you like, but I don't want to do so without some review (it's not as trivial a change as moving the corresponding footnote to the other section). From 4b431a0fc2a4df7cecd8b6649227415ed86e7f7c Mon Sep 17 00:00:00 2001 From: Nicolas Richard <theonewiththeevillook@yahoo.fr> Date: Wed, 19 Mar 2014 23:13:39 +0100 Subject: [PATCH] Keep documentation on "Previewing LaTeX" in its own section * doc/org.texi: Keep documentation on "Previewing LaTeX" in its own section --- doc/org.texi | 39 ++++++++++++++++++--------------------- 1 file changed, 18 insertions(+), 21 deletions(-) diff --git a/doc/org.texi b/doc/org.texi index c442f83..447cde9 100644 --- a/doc/org.texi +++ b/doc/org.texi @@ -10140,19 +10140,13 @@ format sub- and superscripts in a WYSIWYM way. Going beyond symbols and sub- and superscripts, a full formula language is needed. Org mode can contain @LaTeX{} math fragments, and it supports ways to process these for several export back-ends. When exporting to @LaTeX{}, -the code is obviously left as it is. When exporting to HTML, Org invokes the -@uref{http://www.mathjax.org, MathJax library} (@pxref{Math formatting in +the code is obviously left as it is. When exporting to HTML, Org can invoke +the @uref{http://www.mathjax.org, MathJax library} (@pxref{Math formatting in HTML export}) to process and display the math@footnote{If you plan to use this regularly or on pages with significant page views, you should install @file{MathJax} on your own server in order to limit the load of our server.}. -Finally, it can also process the mathematical expressions into -images@footnote{For this to work you need to be on a system with a working -@LaTeX{} installation. You also need the @file{dvipng} program or the -@file{convert}, respectively available at -@url{http://sourceforge.net/projects/dvipng/} and from the @file{imagemagick} -suite. The @LaTeX{} header that will be used when processing a fragment can -be configured with the variable @code{org-format-latex-header}.} that can be -displayed in a browser. +It can also process the mathematical expressions into images that can be +displayed in a browser (see @pxref{Previewing @LaTeX{} fragments}). @LaTeX{} fragments don't need any special marking at all. The following snippets will be identified as @LaTeX{} source code: @@ -10210,11 +10204,21 @@ lines: @cindex @LaTeX{} fragments, preview @vindex org-latex-create-formula-image-program -If you have @file{dvipng} or @file{imagemagick} installed@footnote{Choose the -converter by setting the variable +If you have a working @LaTeX{} installation and either @file{dvipng} or +@file{convert} installed@footnote{These are respectively available at +@url{http://sourceforge.net/projects/dvipng/} and from the @file{imagemagick} +suite. Choose the converter by setting the variable @code{org-latex-create-formula-image-program} accordingly.}, @LaTeX{} -fragments can be processed to produce preview images of the typeset -expressions: +fragments can be processed to produce images of the typeset expressions to be +used for inclusion while exporting to HTML (see @pxref{@LaTeX{} fragments}), +or for inline previewing within Org mode. + +@vindex org-format-latex-options +@vindex org-format-latex-header +You can customize the variables @code{org-format-latex-options} and +@code{org-format-latex-header} to influence some aspects of the preview. In +particular, the @code{:scale} (and for HTML export, @code{:html-scale}) +property of the former can be used to adjust the size of the preview images. @table @kbd @kindex C-c C-x C-l @@ -10230,13 +10234,6 @@ process the entire buffer. Remove the overlay preview images. @end table -@vindex org-format-latex-options -@vindex org-format-latex-header -You can customize the variables @code{org-format-latex-options} and -@code{org-format-latex-header} to influence some aspects of the preview. In -particular, the @code{:scale} (and for HTML export, @code{:html-scale}) -property of the former can be used to adjust the size of the preview images. - @vindex org-startup-with-latex-preview You can turn on the previewing of all @LaTeX{} fragments in a file with -- 1.9.1 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: preview and default class [8.2.5h (release_8.2.5h-677-g55b0a3 @ /home/youngfrog/sourcetrees/org-mode/lisp/)] 2014-03-19 22:22 ` Nicolas Richard @ 2014-03-20 10:55 ` Bastien 2014-03-20 11:13 ` Nicolas Richard 2014-03-22 16:15 ` Nicolas Richard 0 siblings, 2 replies; 11+ messages in thread From: Bastien @ 2014-03-20 10:55 UTC (permalink / raw) To: Nicolas Richard; +Cc: emacs-orgmode Hi Nicolas, Nicolas Richard <theonewiththeevillook@yahoo.fr> writes: > Here's a patch. I can commit it if you like, but I don't want to do so > without some review (it's not as trivial a change as moving the > corresponding footnote to the other section). I can't apply the patch, either on maint or on master, but by reading it carefully it looks good. Just add a missing full-stop at the end of the Changelog sentence "in its own section.", and perhaps use `C-x 4 a' from within the diff to include the section's name in the Changelog too. PS: I didn't check carefully because I don't use `C' from magit, but I assume magit may be wrong in creating Changelogs. We should report this to magit maintainers if this is true. -- Bastien ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: preview and default class [8.2.5h (release_8.2.5h-677-g55b0a3 @ /home/youngfrog/sourcetrees/org-mode/lisp/)] 2014-03-20 10:55 ` Bastien @ 2014-03-20 11:13 ` Nicolas Richard 2014-03-20 21:56 ` Bastien 2014-03-22 16:15 ` Nicolas Richard 1 sibling, 1 reply; 11+ messages in thread From: Nicolas Richard @ 2014-03-20 11:13 UTC (permalink / raw) To: Bastien; +Cc: emacs-orgmode Le 20/03/2014 11:55, Bastien a écrit : > Hi Nicolas, > > Nicolas Richard <theonewiththeevillook@yahoo.fr> writes: > >> Here's a patch. I can commit it if you like, but I don't want to do so >> without some review (it's not as trivial a change as moving the >> corresponding footnote to the other section). > > I can't apply the patch, either on maint or on master, but by reading > it carefully it looks good. > Just add a missing full-stop at the end of the Changelog sentence "in > its own section.", and perhaps use `C-x 4 a' from within the diff to > include the section's name in the Changelog too. Ok, I'll fix that and make sure it can be applied to master (I'm not sure how I managed to miss that part.) > PS: I didn't check carefully because I don't use `C' from magit, but > I assume magit may be wrong in creating Changelogs. We should report > this to magit maintainers if this is true. Indeed there usually is some difference between C (magit) and C-x 4 a. I will have a look and report it when I get a chance. -- Nico. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: preview and default class [8.2.5h (release_8.2.5h-677-g55b0a3 @ /home/youngfrog/sourcetrees/org-mode/lisp/)] 2014-03-20 11:13 ` Nicolas Richard @ 2014-03-20 21:56 ` Bastien 0 siblings, 0 replies; 11+ messages in thread From: Bastien @ 2014-03-20 21:56 UTC (permalink / raw) To: Nicolas Richard; +Cc: emacs-orgmode Nicolas Richard <theonewiththeevillook@yahoo.fr> writes: > Indeed there usually is some difference between C (magit) and C-x 4 a. I > will have a look and report it when I get a chance. That'd be great, thanks, -- Bastien ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: preview and default class [8.2.5h (release_8.2.5h-677-g55b0a3 @ /home/youngfrog/sourcetrees/org-mode/lisp/)] 2014-03-20 10:55 ` Bastien 2014-03-20 11:13 ` Nicolas Richard @ 2014-03-22 16:15 ` Nicolas Richard 2014-03-22 16:41 ` Bastien 1 sibling, 1 reply; 11+ messages in thread From: Nicolas Richard @ 2014-03-22 16:15 UTC (permalink / raw) To: Bastien; +Cc: Nicolas Richard, emacs-orgmode [-- Attachment #1: Type: text/plain, Size: 768 bytes --] Hello Bastien, Bastien <bzg@gnu.org> writes: > Just add a missing full-stop at the end of the Changelog sentence "in > its own section.", Done > and perhaps use `C-x 4 a' from within the diff to > include the section's name in the Changelog too. I tried that in both parts of the diff, but then I get : * org.texi (used, lines): (The lines 'used:' and 'lines:' appear in that file.) I guess that's not the intended result so I left that as is. > PS: I didn't check carefully because I don't use `C' from magit, but > I assume magit may be wrong in creating Changelogs. We should report > this to magit maintainers if this is true. In this case it seems that nothing was better than doing what C-x 4 a did, so I didn't check further. Here's the new patch : [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: 0001-Keep-documentation-on-Previewing-LaTeX-in-its-own-se.patch --] [-- Type: text/x-diff, Size: 3954 bytes --] From cf5246c5f44fe637cb2000cf92b2f47499d7b8d2 Mon Sep 17 00:00:00 2001 From: Nicolas Richard <theonewiththeevillook@yahoo.fr> Date: Thu, 6 Mar 2014 13:21:41 +0100 Subject: [PATCH] Keep documentation on "Previewing LaTeX" in its own section * doc/org.texi: Keep documentation on "Previewing LaTeX" in its own section. --- doc/org.texi | 38 ++++++++++++++++++-------------------- 1 file changed, 18 insertions(+), 20 deletions(-) diff --git a/doc/org.texi b/doc/org.texi index e835022..2abfa66 100644 --- a/doc/org.texi +++ b/doc/org.texi @@ -10147,19 +10147,13 @@ format sub- and superscripts in a WYSIWYM way. Going beyond symbols and sub- and superscripts, a full formula language is needed. Org mode can contain @LaTeX{} math fragments, and it supports ways to process these for several export back-ends. When exporting to @LaTeX{}, -the code is obviously left as it is. When exporting to HTML, Org invokes the -@uref{http://www.mathjax.org, MathJax library} (@pxref{Math formatting in +the code is obviously left as it is. When exporting to HTML, Org can invoke +the @uref{http://www.mathjax.org, MathJax library} (@pxref{Math formatting in HTML export}) to process and display the math@footnote{If you plan to use this regularly or on pages with significant page views, you should install @file{MathJax} on your own server in order to limit the load of our server.}. -Finally, it can also process the mathematical expressions into -images@footnote{For this to work you need to be on a system with a working -@LaTeX{} installation. You also need the @file{dvipng} program or the -@file{convert}, respectively available at -@url{http://sourceforge.net/projects/dvipng/} and from the @file{imagemagick} -suite. The @LaTeX{} header that will be used when processing a fragment can -be configured with the variable @code{org-format-latex-header}.} that can be -displayed in a browser. +It can also process the mathematical expressions into images that can be +displayed in a browser (see @pxref{Previewing @LaTeX{} fragments}). @LaTeX{} fragments don't need any special marking at all. The following snippets will be identified as @LaTeX{} source code: @@ -10217,11 +10211,21 @@ lines: @cindex @LaTeX{} fragments, preview @vindex org-latex-create-formula-image-program -If you have @file{dvipng} or @file{imagemagick} installed@footnote{Choose the -converter by setting the variable +If you have a working @LaTeX{} installation and either @file{dvipng} or +@file{convert} installed@footnote{These are respectively available at +@url{http://sourceforge.net/projects/dvipng/} and from the @file{imagemagick} +suite. Choose the converter by setting the variable @code{org-latex-create-formula-image-program} accordingly.}, @LaTeX{} -fragments can be processed to produce preview images of the typeset -expressions: +fragments can be processed to produce images of the typeset expressions to be +used for inclusion while exporting to HTML (see @pxref{@LaTeX{} fragments}), +or for inline previewing within Org mode. + +@vindex org-format-latex-options +@vindex org-format-latex-header +You can customize the variables @code{org-format-latex-options} and +@code{org-format-latex-header} to influence some aspects of the preview. In +particular, the @code{:scale} (and for HTML export, @code{:html-scale}) +property of the former can be used to adjust the size of the preview images. @table @kbd @kindex C-c C-x C-l @@ -10237,12 +10241,6 @@ process the entire buffer. Remove the overlay preview images. @end table -@vindex org-format-latex-options -You can customize the variable @code{org-format-latex-options} to influence -some aspects of the preview. In particular, the @code{:scale} (and for HTML -export, @code{:html-scale}) property can be used to adjust the size of the -preview images. - @vindex org-startup-with-latex-preview You can turn on the previewing of all @LaTeX{} fragments in a file with -- 1.9.1 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: preview and default class [8.2.5h (release_8.2.5h-677-g55b0a3 @ /home/youngfrog/sourcetrees/org-mode/lisp/)] 2014-03-22 16:15 ` Nicolas Richard @ 2014-03-22 16:41 ` Bastien 2014-03-22 17:09 ` Nicolas Richard 0 siblings, 1 reply; 11+ messages in thread From: Bastien @ 2014-03-22 16:41 UTC (permalink / raw) To: Nicolas Richard; +Cc: emacs-orgmode Hi Nicolas, Nicolas Richard <theonewiththeevillook@yahoo.fr> writes: > Done Thanks, applied on master, with a slight change in the Changelog entry. -- Bastien ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: preview and default class [8.2.5h (release_8.2.5h-677-g55b0a3 @ /home/youngfrog/sourcetrees/org-mode/lisp/)] 2014-03-22 16:41 ` Bastien @ 2014-03-22 17:09 ` Nicolas Richard 2014-03-23 8:29 ` Bastien 0 siblings, 1 reply; 11+ messages in thread From: Nicolas Richard @ 2014-03-22 17:09 UTC (permalink / raw) To: Bastien; +Cc: emacs-orgmode Bastien <bzg@gnu.org> writes: > Thanks, applied on master, with a slight change in the Changelog > entry. Ok thanks. For my information, did C-x 4 a work for you in adding the section name or did you add it manually ? -- Nico. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: preview and default class [8.2.5h (release_8.2.5h-677-g55b0a3 @ /home/youngfrog/sourcetrees/org-mode/lisp/)] 2014-03-22 17:09 ` Nicolas Richard @ 2014-03-23 8:29 ` Bastien 2014-03-23 9:53 ` Nicolas Richard 0 siblings, 1 reply; 11+ messages in thread From: Bastien @ 2014-03-23 8:29 UTC (permalink / raw) To: Nicolas Richard; +Cc: emacs-orgmode Hi Nicolas, Nicolas Richard <theonewiththeevillook@yahoo.fr> writes: > Ok thanks. For my information, did C-x 4 a work for you in adding the > section name or did you add it manually ? It worked from the diff. I applied your patch with git apply, then went to the modified file, then C-x v =, then hit `n' to go to the next change and `C-x 4 a' to create the Changelog. HTH, -- Bastien ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: preview and default class [8.2.5h (release_8.2.5h-677-g55b0a3 @ /home/youngfrog/sourcetrees/org-mode/lisp/)] 2014-03-23 8:29 ` Bastien @ 2014-03-23 9:53 ` Nicolas Richard 0 siblings, 0 replies; 11+ messages in thread From: Nicolas Richard @ 2014-03-23 9:53 UTC (permalink / raw) To: Bastien; +Cc: Nicolas Richard, emacs-orgmode Bastien <bzg@gnu.org> writes: > It worked from the diff. > > I applied your patch with git apply, then went to the modified file, > then C-x v =, then hit `n' to go to the next change and `C-x 4 a' to > create the Changelog. Thanks, I'll try again and hopefully find out what's wrong with what I did. Nico. ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2014-03-23 9:53 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-03-06 12:47 preview and default class [8.2.5h (release_8.2.5h-677-g55b0a3 @ /home/youngfrog/sourcetrees/org-mode/lisp/)] Nicolas Richard 2014-03-13 14:26 ` Bastien 2014-03-19 22:22 ` Nicolas Richard 2014-03-20 10:55 ` Bastien 2014-03-20 11:13 ` Nicolas Richard 2014-03-20 21:56 ` Bastien 2014-03-22 16:15 ` Nicolas Richard 2014-03-22 16:41 ` Bastien 2014-03-22 17:09 ` Nicolas Richard 2014-03-23 8:29 ` Bastien 2014-03-23 9:53 ` Nicolas Richard
Code repositories for project(s) associated with this external index https://git.savannah.gnu.org/cgit/emacs.git https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.