* [PATCH] new babel latex feature :imagemagick
@ 2011-02-24 16:16 Andreas Leha
2011-02-24 18:49 ` Eric S Fraga
` (2 more replies)
0 siblings, 3 replies; 13+ messages in thread
From: Andreas Leha @ 2011-02-24 16:16 UTC (permalink / raw
To: emacs-orgmode
[-- Attachment #1.1.1: Type: text/plain, Size: 1960 bytes --]
Hi all,
Just a small patch that might make life easier for
LaTeX (and esp. tikz) users. It enables the output of graphics in a
lot of formats using imagemagick. See below for an example.
This is my first patch, I have never programmed emacs lisp before, and
my common lisp experiences have been short and a while ago. So please
excuse a (possibly) bad patch.
Details:
LaTeX source blocks now have three new options:
- :imagemagick
When not nil the source block is processed to pdf and the pdf is
converted with imagemagick to whatever is given as :file
Thus, the format is not limited to png.
- :iminoptions
This is passed to imagemagick before the pdf file
- :imoutoptions
This is passed to imagemagick before the output file
Small Example:
#+begin_src latex ... :file test.jpg :imagemagick yes :iminoptions
-density 300 :imoutoptions -geometry 400 ...
will use this command for conversion:
convert -density 300 <tmp-pdf> -geometry 400 test.jpg
Full example:
Export this to pdf and to html to see the effect.
=======================================
* Test
#+begin_src R :session :exports both :results silent
library("tikzDevice")
#+end_src
#+srcname: test_plot
#+begin_src R :session :exports code :results output latex
tikz(console=TRUE, width=4, height=4)
plot(rnorm(100), rnorm(100))
dummy <- dev.off()
#+end_src
#+srcname: test_plot_png
#+begin_src latex :exports (if (and (boundp 'backend) (eq backend
'latex)) "none" "results") :file test.png :imagemagick yes :iminoptions
-density 600 :imoutoptions -geometry 400 :fit yes :noweb yes :headers
'("\\usepackage{tikz}")
<<test_plot()>>
#+end_src
#+srcname: test_plot_tikz
#+begin_src latex :noweb yes
<<test_plot()>>
#+end_src
* Latex Options :noexport:
#+LATEX_HEADER: \usepackage{tikz}
=======================================
Regards,
Andreas
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1.1.2: ob-latex.el.diff --]
[-- Type: text/x-patch; name="ob-latex.el.diff", Size: 2896 bytes --]
diff --git a/lisp/ob-latex.el b/lisp/ob-latex.el
index 8943ded..6152ad3 100644
--- a/lisp/ob-latex.el
+++ b/lisp/ob-latex.el
@@ -72,6 +72,10 @@ This function is called by `org-babel-execute-src-block'."
(let* ((out-file (cdr (assoc :file params)))
(tex-file (org-babel-temp-file "latex-" ".tex"))
(border (cdr (assoc :border params)))
+ (imagemagick (cdr (assoc :imagemagick params)))
+ (im-in-options (cdr (assoc :iminoptions params)))
+ (im-out-options (cdr (assoc :imoutoptions params)))
+ (pdfpng (cdr (assoc :pdfpng params)))
(fit (or (cdr (assoc :fit params)) border))
(height (and fit (cdr (assoc :pdfheight params))))
(width (and fit (cdr (assoc :pdfwidth params))))
@@ -81,10 +85,10 @@ This function is called by `org-babel-execute-src-block'."
(append (cdr (assoc :packages params))
org-export-latex-packages-alist)))
(cond
- ((string-match "\\.png$" out-file)
+ ((and (string-match "\\.png$" out-file) (not imagemagick))
(org-create-formula-image
body out-file org-format-latex-options in-buffer))
- ((string-match "\\.pdf$" out-file)
+ ((or (string-match "\\.pdf$" out-file) imagemagick)
(require 'org-latex)
(with-temp-file tex-file
(insert
@@ -118,13 +122,26 @@ This function is called by `org-babel-execute-src-block'."
(concat "\n\\begin{document}\n" body "\n\\end{document}\n")))
(org-export-latex-fix-inputenc))
(when (file-exists-p out-file) (delete-file out-file))
- (rename-file (org-babel-latex-tex-to-pdf tex-file) out-file))
+ (let* ((transient-pdf-file (org-babel-latex-tex-to-pdf tex-file)))
+ (cond
+ ((string-match "\\.pdf$" out-file)
+ (rename-file transient-pdf-file out-file))
+ (imagemagick
+ (convert-pdf transient-pdf-file out-file im-in-options im-out-options)
+ (when (file-exists-p transient-pdf-file) (delete-file transient-pdf-file))))))
((string-match "\\.\\([^\\.]+\\)$" out-file)
- (error "can not create %s files, please specify a .png or .pdf file"
+ (error "can not create %s files, please specify a .png or .pdf file or try the :imagemagick header arguement"
(match-string 1 out-file))))
nil) ;; signal that output has already been written to file
body))
+
+(defun convert-pdf (pdffile out-file im-in-options im-out-options)
+ "Generate a file from a pdf file using imagemagick."
+ (let* ((cmd (concat "convert " im-in-options " " pdffile " " im-out-options " " out-file)))
+ (message (concat "Converting pdffile file " cmd "..."))
+ (shell-command cmd)))
+
(defun org-babel-latex-tex-to-pdf (file)
"Generate a pdf file according to the contents FILE.
Extracted from `org-export-as-pdf' in org-latex.el."
[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 6432 bytes --]
[-- Attachment #2: Type: text/plain, Size: 201 bytes --]
_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH] new babel latex feature :imagemagick
2011-02-24 16:16 [PATCH] new babel latex feature :imagemagick Andreas Leha
@ 2011-02-24 18:49 ` Eric S Fraga
2011-02-26 0:16 ` Eric Schulte
2011-02-26 0:13 ` Eric Schulte
2011-02-26 0:13 ` Eric Schulte
2 siblings, 1 reply; 13+ messages in thread
From: Eric S Fraga @ 2011-02-24 18:49 UTC (permalink / raw
To: Andreas Leha; +Cc: emacs-orgmode
Andreas Leha <andreas.leha@med.uni-goettingen.de> writes:
> Hi all,
>
> Just a small patch that might make life easier for
> LaTeX (and esp. tikz) users. It enables the output of graphics in a
> lot of formats using imagemagick. See below for an example.
[...]
This seems to work rather well. I tried the following:
#+begin_src org
* tikz with image magick
The following is a simple figure generated using tikz:
#+begin_src latex :exports results :results (if (and (boundp 'backend) (eq backend 'latex)) "latex" "file") :file test.png :imagemagick yes :iminoptions -density 600 :imoutoptions -geometry 400 :fit yes :noweb yes :headers '("\\usepackage{tikz}")
\begin{tikzpicture}
\node[red!50!black] (a) {A};
\node (b) [right of=a] {B};
\draw[->] (a) -- (b);
\end{tikzpicture}
#+end_src
#+end_src
and I get native tikz in the latex output and a png in the html output.
very nice!
I haven't done exhaustive testing so I don't know if the patch breaks
anything, mind you.
Thanks,
eric
--
: Eric S Fraga (GnuPG: 0xC89193D8FFFCF67D) in Emacs 24.0.50.1
: using Org-mode version 7.4 (release_7.4.529.gb23d.dirty)
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] new babel latex feature :imagemagick
2011-02-24 16:16 [PATCH] new babel latex feature :imagemagick Andreas Leha
2011-02-24 18:49 ` Eric S Fraga
2011-02-26 0:13 ` Eric Schulte
@ 2011-02-26 0:13 ` Eric Schulte
2 siblings, 0 replies; 13+ messages in thread
From: Eric Schulte @ 2011-02-26 0:13 UTC (permalink / raw
To: Andreas Leha; +Cc: emacs-orgmode
Hi Andreas,
This patch looks like a great idea and a clean implementation. Thanks
for sharing. Would you be willing to sign the FSF copyright assignment
papers? If not I probably can not apply your patch as it changes over
10 lines -- which I'm pretty sure is the copyright assignment cutoff.
For more information on contributing to Org-mode see the following
http://orgmode.org/worg/org-contribute.html
Thanks! -- Eric
Andreas Leha <andreas.leha@med.uni-goettingen.de> writes:
> Hi all,
>
> Just a small patch that might make life easier for
> LaTeX (and esp. tikz) users. It enables the output of graphics in a
> lot of formats using imagemagick. See below for an example.
>
> This is my first patch, I have never programmed emacs lisp before, and
> my common lisp experiences have been short and a while ago. So please
> excuse a (possibly) bad patch.
>
> Details:
> LaTeX source blocks now have three new options:
> - :imagemagick
> When not nil the source block is processed to pdf and the pdf is
> converted with imagemagick to whatever is given as :file
> Thus, the format is not limited to png.
> - :iminoptions
> This is passed to imagemagick before the pdf file
> - :imoutoptions
> This is passed to imagemagick before the output file
>
> Small Example:
> #+begin_src latex ... :file test.jpg :imagemagick yes :iminoptions
> -density 300 :imoutoptions -geometry 400 ...
> will use this command for conversion:
> convert -density 300 <tmp-pdf> -geometry 400 test.jpg
>
> Full example:
> Export this to pdf and to html to see the effect.
> =======================================
> * Test
> #+begin_src R :session :exports both :results silent
> library("tikzDevice")
> #+end_src
> #+srcname: test_plot
> #+begin_src R :session :exports code :results output latex
> tikz(console=TRUE, width=4, height=4)
> plot(rnorm(100), rnorm(100))
> dummy <- dev.off()
> #+end_src
>
> #+srcname: test_plot_png
> #+begin_src latex :exports (if (and (boundp 'backend) (eq backend
> 'latex)) "none" "results") :file test.png :imagemagick yes :iminoptions
> -density 600 :imoutoptions -geometry 400 :fit yes :noweb yes :headers
> '("\\usepackage{tikz}")
> <<test_plot()>>
> #+end_src
>
> #+srcname: test_plot_tikz
> #+begin_src latex :noweb yes
> <<test_plot()>>
> #+end_src
>
> * Latex Options :noexport:
> #+LATEX_HEADER: \usepackage{tikz}
> =======================================
>
> Regards,
> Andreas
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] new babel latex feature :imagemagick
2011-02-24 16:16 [PATCH] new babel latex feature :imagemagick Andreas Leha
2011-02-24 18:49 ` Eric S Fraga
@ 2011-02-26 0:13 ` Eric Schulte
2011-02-26 10:41 ` Andreas Leha
2011-02-26 0:13 ` Eric Schulte
2 siblings, 1 reply; 13+ messages in thread
From: Eric Schulte @ 2011-02-26 0:13 UTC (permalink / raw
To: Andreas Leha; +Cc: emacs-orgmode
Hi Andreas,
This patch looks like a great idea and a clean implementation. Thanks
for sharing. Would you be willing to sign the FSF copyright assignment
papers? If not I probably can not apply your patch as it changes over
10 lines -- which I'm pretty sure is the copyright assignment cutoff.
For more information on contributing to Org-mode see the following
http://orgmode.org/worg/org-contribute.html
Thanks! -- Eric
Andreas Leha <andreas.leha@med.uni-goettingen.de> writes:
> Hi all,
>
> Just a small patch that might make life easier for
> LaTeX (and esp. tikz) users. It enables the output of graphics in a
> lot of formats using imagemagick. See below for an example.
>
> This is my first patch, I have never programmed emacs lisp before, and
> my common lisp experiences have been short and a while ago. So please
> excuse a (possibly) bad patch.
>
> Details:
> LaTeX source blocks now have three new options:
> - :imagemagick
> When not nil the source block is processed to pdf and the pdf is
> converted with imagemagick to whatever is given as :file
> Thus, the format is not limited to png.
> - :iminoptions
> This is passed to imagemagick before the pdf file
> - :imoutoptions
> This is passed to imagemagick before the output file
>
> Small Example:
> #+begin_src latex ... :file test.jpg :imagemagick yes :iminoptions
> -density 300 :imoutoptions -geometry 400 ...
> will use this command for conversion:
> convert -density 300 <tmp-pdf> -geometry 400 test.jpg
>
> Full example:
> Export this to pdf and to html to see the effect.
> =======================================
> * Test
> #+begin_src R :session :exports both :results silent
> library("tikzDevice")
> #+end_src
> #+srcname: test_plot
> #+begin_src R :session :exports code :results output latex
> tikz(console=TRUE, width=4, height=4)
> plot(rnorm(100), rnorm(100))
> dummy <- dev.off()
> #+end_src
>
> #+srcname: test_plot_png
> #+begin_src latex :exports (if (and (boundp 'backend) (eq backend
> 'latex)) "none" "results") :file test.png :imagemagick yes :iminoptions
> -density 600 :imoutoptions -geometry 400 :fit yes :noweb yes :headers
> '("\\usepackage{tikz}")
> <<test_plot()>>
> #+end_src
>
> #+srcname: test_plot_tikz
> #+begin_src latex :noweb yes
> <<test_plot()>>
> #+end_src
>
> * Latex Options :noexport:
> #+LATEX_HEADER: \usepackage{tikz}
> =======================================
>
> Regards,
> Andreas
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] new babel latex feature :imagemagick
2011-02-24 18:49 ` Eric S Fraga
@ 2011-02-26 0:16 ` Eric Schulte
2011-02-28 9:28 ` Eric S Fraga
0 siblings, 1 reply; 13+ messages in thread
From: Eric Schulte @ 2011-02-26 0:16 UTC (permalink / raw
To: Eric S Fraga; +Cc: Andreas Leha, emacs-orgmode
> #+begin_src org
>
> * tikz with image magick
> The following is a simple figure generated using tikz:
>
> #+begin_src latex :exports results :results (if (and (boundp 'backend) (eq backend 'latex)) "latex" "file") :file test.png :imagemagick yes :iminoptions -density 600 :imoutoptions -geometry 400 :fit yes :noweb yes :headers '("\\usepackage{tikz}")
> \begin{tikzpicture}
> \node[red!50!black] (a) {A};
> \node (b) [right of=a] {B};
> \draw[->] (a) -- (b);
> \end{tikzpicture}
> #+end_src
>
> #+end_src
Very nice, are you aware of the option to split header arguments among
multiple lines?
the above could be written as...
#+headers: :file test.png :fit yes
#+headers: :imagemagick yes :iminoptions -density 600 :imoutoptions -geometry 400
#+headers: :results (if (and (boundp 'backend) (eq backend 'latex)) "latex" "file")
#+begin_src latex :exports results :noweb yes :headers '("\\usepackage{tikz}")
\begin{tikzpicture}
\node[red!50!black] (a) {A};
\node (b) [right of=a] {B};
\draw[->] (a) -- (b);
\end{tikzpicture}
#+end_src
which is (possibly) easier to write/read
Best -- Eric
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] new babel latex feature :imagemagick
2011-02-26 0:13 ` Eric Schulte
@ 2011-02-26 10:41 ` Andreas Leha
2011-02-26 16:06 ` Eric Schulte
` (2 more replies)
0 siblings, 3 replies; 13+ messages in thread
From: Andreas Leha @ 2011-02-26 10:41 UTC (permalink / raw
To: emacs-orgmode
[-- Attachment #1.1.1: Type: text/plain, Size: 3636 bytes --]
It's on the way.
Am 26.02.2011 01:13, schrieb Eric Schulte:
> Hi Andreas,
>
> This patch looks like a great idea and a clean implementation. Thanks
> for sharing. Would you be willing to sign the FSF copyright assignment
> papers? If not I probably can not apply your patch as it changes over
> 10 lines -- which I'm pretty sure is the copyright assignment cutoff.
>
> For more information on contributing to Org-mode see the following
> http://orgmode.org/worg/org-contribute.html
>
> Thanks! -- Eric
>
> Andreas Leha <andreas.leha@med.uni-goettingen.de> writes:
>
>
>> Hi all,
>>
>> Just a small patch that might make life easier for
>> LaTeX (and esp. tikz) users. It enables the output of graphics in a
>> lot of formats using imagemagick. See below for an example.
>>
>> This is my first patch, I have never programmed emacs lisp before, and
>> my common lisp experiences have been short and a while ago. So please
>> excuse a (possibly) bad patch.
>>
>> Details:
>> LaTeX source blocks now have three new options:
>> - :imagemagick
>> When not nil the source block is processed to pdf and the pdf is
>> converted with imagemagick to whatever is given as :file
>> Thus, the format is not limited to png.
>> - :iminoptions
>> This is passed to imagemagick before the pdf file
>> - :imoutoptions
>> This is passed to imagemagick before the output file
>>
>> Small Example:
>> #+begin_src latex ... :file test.jpg :imagemagick yes :iminoptions
>> -density 300 :imoutoptions -geometry 400 ...
>> will use this command for conversion:
>> convert -density 300 <tmp-pdf> -geometry 400 test.jpg
>>
>> Full example:
>> Export this to pdf and to html to see the effect.
>> =======================================
>> * Test
>> #+begin_src R :session :exports both :results silent
>> library("tikzDevice")
>> #+end_src
>> #+srcname: test_plot
>> #+begin_src R :session :exports code :results output latex
>> tikz(console=TRUE, width=4, height=4)
>> plot(rnorm(100), rnorm(100))
>> dummy <- dev.off()
>> #+end_src
>>
>> #+srcname: test_plot_png
>> #+begin_src latex :exports (if (and (boundp 'backend) (eq backend
>> 'latex)) "none" "results") :file test.png :imagemagick yes :iminoptions
>> -density 600 :imoutoptions -geometry 400 :fit yes :noweb yes :headers
>> '("\\usepackage{tikz}")
>> <<test_plot()>>
>> #+end_src
>>
>> #+srcname: test_plot_tikz
>> #+begin_src latex :noweb yes
>> <<test_plot()>>
>> #+end_src
>>
>> * Latex Options :noexport:
>> #+LATEX_HEADER: \usepackage{tikz}
>> =======================================
>>
>> Regards,
>> Andreas
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
--
Universitätsmedizin Göttingen
Abteilung Medizinische Statistik
Humboldtallee 32
37073 Göttingen
Tel: +49 (0)551 39-10710
Fax: +49 (0)551 39-4995
http://www.ams.med.uni-goettingen.de/amsneu/leha.html
University Medical Center Göttingen
Department for Medical Statistics
Humboldtallee 32
37073 Göttingen
Germany
Phone: +49 (0) 551 39-10710
Fax: +49 (0) 551 39-4995
http://www.ams.med.uni-goettingen.de/amsneu/leha-en.html
[-- Attachment #1.1.2: andreas_leha.vcf --]
[-- Type: text/x-vcard, Size: 377 bytes --]
begin:vcard
fn:Andreas Leha
n:Leha;Andreas
org;quoted-printable:University Medicine G=C3=B6ttingen;Biostatistics/Bioinformatics (Dept. Medical Statistics)
adr;quoted-printable:;;Humboldallee 32;G=C3=B6ttingen;;37073;Germany
email;internet:andreas.leha@med.uni-goettingen.de
title:Dipl. Inf.
tel;work:+49 551 39-10710
tel;cell:+49 163 7662824
version:2.1
end:vcard
[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 6432 bytes --]
[-- Attachment #2: Type: text/plain, Size: 201 bytes --]
_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] new babel latex feature :imagemagick
2011-02-26 10:41 ` Andreas Leha
@ 2011-02-26 16:06 ` Eric Schulte
2011-02-26 16:41 ` Eric Schulte
2011-06-28 20:52 ` Sebastien Vauban
2 siblings, 0 replies; 13+ messages in thread
From: Eric Schulte @ 2011-02-26 16:06 UTC (permalink / raw
To: Andreas Leha; +Cc: emacs-orgmode
Andreas Leha <andreas.leha@med.uni-goettingen.de> writes:
> It's on the way.
>
Wonderful, in that case I'll apply your patch immediately.
Thanks -- Eric
>
> Am 26.02.2011 01:13, schrieb Eric Schulte:
>> Hi Andreas,
>>
>> This patch looks like a great idea and a clean implementation. Thanks
>> for sharing. Would you be willing to sign the FSF copyright assignment
>> papers? If not I probably can not apply your patch as it changes over
>> 10 lines -- which I'm pretty sure is the copyright assignment cutoff.
>>
>> For more information on contributing to Org-mode see the following
>> http://orgmode.org/worg/org-contribute.html
>>
>> Thanks! -- Eric
>>
>> Andreas Leha <andreas.leha@med.uni-goettingen.de> writes:
>>
>>
>>> Hi all,
>>>
>>> Just a small patch that might make life easier for
>>> LaTeX (and esp. tikz) users. It enables the output of graphics in a
>>> lot of formats using imagemagick. See below for an example.
>>>
>>> This is my first patch, I have never programmed emacs lisp before, and
>>> my common lisp experiences have been short and a while ago. So please
>>> excuse a (possibly) bad patch.
>>>
>>> Details:
>>> LaTeX source blocks now have three new options:
>>> - :imagemagick
>>> When not nil the source block is processed to pdf and the pdf is
>>> converted with imagemagick to whatever is given as :file
>>> Thus, the format is not limited to png.
>>> - :iminoptions
>>> This is passed to imagemagick before the pdf file
>>> - :imoutoptions
>>> This is passed to imagemagick before the output file
>>>
>>> Small Example:
>>> #+begin_src latex ... :file test.jpg :imagemagick yes :iminoptions
>>> -density 300 :imoutoptions -geometry 400 ...
>>> will use this command for conversion:
>>> convert -density 300 <tmp-pdf> -geometry 400 test.jpg
>>>
>>> Full example:
>>> Export this to pdf and to html to see the effect.
>>> =======================================
>>> * Test
>>> #+begin_src R :session :exports both :results silent
>>> library("tikzDevice")
>>> #+end_src
>>> #+srcname: test_plot
>>> #+begin_src R :session :exports code :results output latex
>>> tikz(console=TRUE, width=4, height=4)
>>> plot(rnorm(100), rnorm(100))
>>> dummy <- dev.off()
>>> #+end_src
>>>
>>> #+srcname: test_plot_png
>>> #+begin_src latex :exports (if (and (boundp 'backend) (eq backend
>>> 'latex)) "none" "results") :file test.png :imagemagick yes :iminoptions
>>> -density 600 :imoutoptions -geometry 400 :fit yes :noweb yes :headers
>>> '("\\usepackage{tikz}")
>>> <<test_plot()>>
>>> #+end_src
>>>
>>> #+srcname: test_plot_tikz
>>> #+begin_src latex :noweb yes
>>> <<test_plot()>>
>>> #+end_src
>>>
>>> * Latex Options :noexport:
>>> #+LATEX_HEADER: \usepackage{tikz}
>>> =======================================
>>>
>>> Regards,
>>> Andreas
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Please use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>
> --
> Universitätsmedizin Göttingen
> Abteilung Medizinische Statistik
> Humboldtallee 32
> 37073 Göttingen
>
> Tel: +49 (0)551 39-10710
> Fax: +49 (0)551 39-4995
>
> http://www.ams.med.uni-goettingen.de/amsneu/leha.html
>
>
>
> University Medical Center Göttingen
> Department for Medical Statistics
> Humboldtallee 32
> 37073 Göttingen
> Germany
>
> Phone: +49 (0) 551 39-10710
> Fax: +49 (0) 551 39-4995
>
> http://www.ams.med.uni-goettingen.de/amsneu/leha-en.html
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] new babel latex feature :imagemagick
2011-02-26 10:41 ` Andreas Leha
2011-02-26 16:06 ` Eric Schulte
@ 2011-02-26 16:41 ` Eric Schulte
2011-06-28 20:52 ` Sebastien Vauban
2 siblings, 0 replies; 13+ messages in thread
From: Eric Schulte @ 2011-02-26 16:41 UTC (permalink / raw
To: Andreas Leha; +Cc: emacs-orgmode
Andreas Leha <andreas.leha@med.uni-goettingen.de> writes:
> It's on the way.
>
Wonderful, in that case I'll apply your patch immediately.
Thanks -- Eric
>
> Am 26.02.2011 01:13, schrieb Eric Schulte:
>> Hi Andreas,
>>
>> This patch looks like a great idea and a clean implementation. Thanks
>> for sharing. Would you be willing to sign the FSF copyright assignment
>> papers? If not I probably can not apply your patch as it changes over
>> 10 lines -- which I'm pretty sure is the copyright assignment cutoff.
>>
>> For more information on contributing to Org-mode see the following
>> http://orgmode.org/worg/org-contribute.html
>>
>> Thanks! -- Eric
>>
>> Andreas Leha <andreas.leha@med.uni-goettingen.de> writes:
>>
>>
>>> Hi all,
>>>
>>> Just a small patch that might make life easier for
>>> LaTeX (and esp. tikz) users. It enables the output of graphics in a
>>> lot of formats using imagemagick. See below for an example.
>>>
>>> This is my first patch, I have never programmed emacs lisp before, and
>>> my common lisp experiences have been short and a while ago. So please
>>> excuse a (possibly) bad patch.
>>>
>>> Details:
>>> LaTeX source blocks now have three new options:
>>> - :imagemagick
>>> When not nil the source block is processed to pdf and the pdf is
>>> converted with imagemagick to whatever is given as :file
>>> Thus, the format is not limited to png.
>>> - :iminoptions
>>> This is passed to imagemagick before the pdf file
>>> - :imoutoptions
>>> This is passed to imagemagick before the output file
>>>
>>> Small Example:
>>> #+begin_src latex ... :file test.jpg :imagemagick yes :iminoptions
>>> -density 300 :imoutoptions -geometry 400 ...
>>> will use this command for conversion:
>>> convert -density 300 <tmp-pdf> -geometry 400 test.jpg
>>>
>>> Full example:
>>> Export this to pdf and to html to see the effect.
>>> =======================================
>>> * Test
>>> #+begin_src R :session :exports both :results silent
>>> library("tikzDevice")
>>> #+end_src
>>> #+srcname: test_plot
>>> #+begin_src R :session :exports code :results output latex
>>> tikz(console=TRUE, width=4, height=4)
>>> plot(rnorm(100), rnorm(100))
>>> dummy <- dev.off()
>>> #+end_src
>>>
>>> #+srcname: test_plot_png
>>> #+begin_src latex :exports (if (and (boundp 'backend) (eq backend
>>> 'latex)) "none" "results") :file test.png :imagemagick yes :iminoptions
>>> -density 600 :imoutoptions -geometry 400 :fit yes :noweb yes :headers
>>> '("\\usepackage{tikz}")
>>> <<test_plot()>>
>>> #+end_src
>>>
>>> #+srcname: test_plot_tikz
>>> #+begin_src latex :noweb yes
>>> <<test_plot()>>
>>> #+end_src
>>>
>>> * Latex Options :noexport:
>>> #+LATEX_HEADER: \usepackage{tikz}
>>> =======================================
>>>
>>> Regards,
>>> Andreas
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Please use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>
> --
> Universitätsmedizin Göttingen
> Abteilung Medizinische Statistik
> Humboldtallee 32
> 37073 Göttingen
>
> Tel: +49 (0)551 39-10710
> Fax: +49 (0)551 39-4995
>
> http://www.ams.med.uni-goettingen.de/amsneu/leha.html
>
>
>
> University Medical Center Göttingen
> Department for Medical Statistics
> Humboldtallee 32
> 37073 Göttingen
> Germany
>
> Phone: +49 (0) 551 39-10710
> Fax: +49 (0) 551 39-4995
>
> http://www.ams.med.uni-goettingen.de/amsneu/leha-en.html
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] new babel latex feature :imagemagick
2011-02-26 0:16 ` Eric Schulte
@ 2011-02-28 9:28 ` Eric S Fraga
0 siblings, 0 replies; 13+ messages in thread
From: Eric S Fraga @ 2011-02-28 9:28 UTC (permalink / raw
To: Eric Schulte; +Cc: Andreas Leha, emacs-orgmode
"Eric Schulte" <schulte.eric@gmail.com> writes:
>> #+begin_src org
>>
>
>> * tikz with image magick
>> The following is a simple figure generated using tikz:
>>
>> #+begin_src latex :exports results :results (if (and (boundp 'backend) (eq backend 'latex)) "latex" "file") :file test.png :imagemagick yes :iminoptions -density 600 :imoutoptions -geometry 400 :fit yes :noweb yes :headers '("\\usepackage{tikz}")
>> \begin{tikzpicture}
>> \node[red!50!black] (a) {A};
>> \node (b) [right of=a] {B};
>> \draw[->] (a) -- (b);
>> \end{tikzpicture}
>> #+end_src
>>
>> #+end_src
>
> Very nice, are you aware of the option to split header arguments among
> multiple lines?
>
> the above could be written as...
>
> #+headers: :file test.png :fit yes
> #+headers: :imagemagick yes :iminoptions -density 600 :imoutoptions -geometry 400
> #+headers: :results (if (and (boundp 'backend) (eq backend 'latex)) "latex" "file")
> #+begin_src latex :exports results :noweb yes :headers '("\\usepackage{tikz}")
> \begin{tikzpicture}
> \node[red!50!black] (a) {A};
> \node (b) [right of=a] {B};
> \draw[->] (a) -- (b);
> \end{tikzpicture}
> #+end_src
>
> which is (possibly) easier to write/read
>
> Best -- Eric
>
It is indeed. Thanks for reminding me of this. My headers are seldom
this long so I had forgotten they could be split.
--
: Eric S Fraga (GnuPG: 0xC89193D8FFFCF67D) in Emacs 24.0.50.1
: using Org-mode version 7.4 (release_7.4.529.gb23d.dirty)
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] new babel latex feature :imagemagick
2011-02-26 10:41 ` Andreas Leha
2011-02-26 16:06 ` Eric Schulte
2011-02-26 16:41 ` Eric Schulte
@ 2011-06-28 20:52 ` Sebastien Vauban
2011-06-29 0:42 ` Eric Schulte
2 siblings, 1 reply; 13+ messages in thread
From: Sebastien Vauban @ 2011-06-28 20:52 UTC (permalink / raw
To: emacs-orgmode-mXXj517/zsQ
Hi Andreas and Eric,
Could this patch be part of 7.6? Very useful...
Best regards,
Seb
Andreas Leha wrote:
> It's on the way.
>
> Am 26.02.2011 01:13, schrieb Eric Schulte:
>> Hi Andreas,
>>
>> This patch looks like a great idea and a clean implementation. Thanks
>> for sharing. Would you be willing to sign the FSF copyright assignment
>> papers? If not I probably can not apply your patch as it changes over
>> 10 lines -- which I'm pretty sure is the copyright assignment cutoff.
>>
>> For more information on contributing to Org-mode see the following
>> http://orgmode.org/worg/org-contribute.html
>>
>> Thanks! -- Eric
>>
>> Andreas Leha <andreas.leha-A1rZ2h3LdSKGMSlLMZIubhS11BummzK+@public.gmane.org> writes:
>>
>>
>>> Hi all,
>>>
>>> Just a small patch that might make life easier for
>>> LaTeX (and esp. tikz) users. It enables the output of graphics in a
>>> lot of formats using imagemagick. See below for an example.
>>>
>>> This is my first patch, I have never programmed emacs lisp before, and
>>> my common lisp experiences have been short and a while ago. So please
>>> excuse a (possibly) bad patch.
>>>
>>> Details:
>>> LaTeX source blocks now have three new options:
>>> - :imagemagick
>>> When not nil the source block is processed to pdf and the pdf is
>>> converted with imagemagick to whatever is given as :file
>>> Thus, the format is not limited to png.
>>> - :iminoptions
>>> This is passed to imagemagick before the pdf file
>>> - :imoutoptions
>>> This is passed to imagemagick before the output file
>>>
>>> Small Example:
>>> #+begin_src latex ... :file test.jpg :imagemagick yes :iminoptions
>>> -density 300 :imoutoptions -geometry 400 ...
>>> will use this command for conversion:
>>> convert -density 300 <tmp-pdf> -geometry 400 test.jpg
>>>
>>> Full example:
>>> Export this to pdf and to html to see the effect.
>>> =======================================
>>> * Test
>>> #+begin_src R :session :exports both :results silent
>>> library("tikzDevice")
>>> #+end_src
>>> #+srcname: test_plot
>>> #+begin_src R :session :exports code :results output latex
>>> tikz(console=TRUE, width=4, height=4)
>>> plot(rnorm(100), rnorm(100))
>>> dummy <- dev.off()
>>> #+end_src
>>>
>>> #+srcname: test_plot_png
>>> #+begin_src latex :exports (if (and (boundp 'backend) (eq backend
>>> 'latex)) "none" "results") :file test.png :imagemagick yes :iminoptions
>>> -density 600 :imoutoptions -geometry 400 :fit yes :noweb yes :headers
>>> '("\\usepackage{tikz}")
>>> <<test_plot()>>
>>> #+end_src
>>>
>>> #+srcname: test_plot_tikz
>>> #+begin_src latex :noweb yes
>>> <<test_plot()>>
>>> #+end_src
>>>
>>> * Latex Options :noexport:
>>> #+LATEX_HEADER: \usepackage{tikz}
>>> =======================================
>>>
>>> Regards,
>>> Andreas
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Please use `Reply All' to send replies to the list.
>>> Emacs-orgmode-mXXj517/zsQ@public.gmane.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> Emacs-orgmode-mXXj517/zsQ@public.gmane.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
--
Sebastien Vauban
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] new babel latex feature :imagemagick
2011-06-28 20:52 ` Sebastien Vauban
@ 2011-06-29 0:42 ` Eric Schulte
2011-11-22 10:37 ` Andreas Leha
0 siblings, 1 reply; 13+ messages in thread
From: Eric Schulte @ 2011-06-29 0:42 UTC (permalink / raw
To: Sebastien Vauban; +Cc: emacs-orgmode
Hi Sebastien,
As far as I know we have not received FSF papers for Andreas, so I do
not believe it will be possible to apply this patch before the 7.6
release.
Best -- Eric
"Sebastien Vauban" <wxhgmqzgwmuf@spammotel.com> writes:
> Hi Andreas and Eric,
>
> Could this patch be part of 7.6? Very useful...
>
> Best regards,
> Seb
>
> Andreas Leha wrote:
>> It's on the way.
>>
>> Am 26.02.2011 01:13, schrieb Eric Schulte:
>>> Hi Andreas,
>>>
>>> This patch looks like a great idea and a clean implementation. Thanks
>>> for sharing. Would you be willing to sign the FSF copyright assignment
>>> papers? If not I probably can not apply your patch as it changes over
>>> 10 lines -- which I'm pretty sure is the copyright assignment cutoff.
>>>
>>> For more information on contributing to Org-mode see the following
>>> http://orgmode.org/worg/org-contribute.html
>>>
>>> Thanks! -- Eric
>>>
>>> Andreas Leha <andreas.leha@med.uni-goettingen.de> writes:
>>>
>>>
>>>> Hi all,
>>>>
>>>> Just a small patch that might make life easier for
>>>> LaTeX (and esp. tikz) users. It enables the output of graphics in a
>>>> lot of formats using imagemagick. See below for an example.
>>>>
>>>> This is my first patch, I have never programmed emacs lisp before, and
>>>> my common lisp experiences have been short and a while ago. So please
>>>> excuse a (possibly) bad patch.
>>>>
>>>> Details:
>>>> LaTeX source blocks now have three new options:
>>>> - :imagemagick
>>>> When not nil the source block is processed to pdf and the pdf is
>>>> converted with imagemagick to whatever is given as :file
>>>> Thus, the format is not limited to png.
>>>> - :iminoptions
>>>> This is passed to imagemagick before the pdf file
>>>> - :imoutoptions
>>>> This is passed to imagemagick before the output file
>>>>
>>>> Small Example:
>>>> #+begin_src latex ... :file test.jpg :imagemagick yes :iminoptions
>>>> -density 300 :imoutoptions -geometry 400 ...
>>>> will use this command for conversion:
>>>> convert -density 300 <tmp-pdf> -geometry 400 test.jpg
>>>>
>>>> Full example:
>>>> Export this to pdf and to html to see the effect.
>>>> =======================================
>>>> * Test
>>>> #+begin_src R :session :exports both :results silent
>>>> library("tikzDevice")
>>>> #+end_src
>>>> #+srcname: test_plot
>>>> #+begin_src R :session :exports code :results output latex
>>>> tikz(console=TRUE, width=4, height=4)
>>>> plot(rnorm(100), rnorm(100))
>>>> dummy <- dev.off()
>>>> #+end_src
>>>>
>>>> #+srcname: test_plot_png
>>>> #+begin_src latex :exports (if (and (boundp 'backend) (eq backend
>>>> 'latex)) "none" "results") :file test.png :imagemagick yes :iminoptions
>>>> -density 600 :imoutoptions -geometry 400 :fit yes :noweb yes :headers
>>>> '("\\usepackage{tikz}")
>>>> <<test_plot()>>
>>>> #+end_src
>>>>
>>>> #+srcname: test_plot_tikz
>>>> #+begin_src latex :noweb yes
>>>> <<test_plot()>>
>>>> #+end_src
>>>>
>>>> * Latex Options :noexport:
>>>> #+LATEX_HEADER: \usepackage{tikz}
>>>> =======================================
>>>>
>>>> Regards,
>>>> Andreas
>>>>
>>>> _______________________________________________
>>>> Emacs-orgmode mailing list
>>>> Please use `Reply All' to send replies to the list.
>>>> Emacs-orgmode@gnu.org
>>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Please use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
--
Eric Schulte
http://cs.unm.edu/~eschulte/
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] new babel latex feature :imagemagick
2011-06-29 0:42 ` Eric Schulte
@ 2011-11-22 10:37 ` Andreas Leha
2011-11-22 13:58 ` Eric Schulte
0 siblings, 1 reply; 13+ messages in thread
From: Andreas Leha @ 2011-11-22 10:37 UTC (permalink / raw
To: emacs-orgmode
FSF papers are signed and the process is completed - so the revert can
be reverted now (the patch should still apply).
Sorry for the long delay...
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] new babel latex feature :imagemagick
2011-11-22 10:37 ` Andreas Leha
@ 2011-11-22 13:58 ` Eric Schulte
0 siblings, 0 replies; 13+ messages in thread
From: Eric Schulte @ 2011-11-22 13:58 UTC (permalink / raw
To: Andreas Leha; +Cc: emacs-orgmode
Applied, thanks -- Eric
Andreas Leha <andreas.leha@med.uni-goettingen.de> writes:
> FSF papers are signed and the process is completed - so the revert can
> be reverted now (the patch should still apply).
> Sorry for the long delay...
>
>
--
Eric Schulte
http://cs.unm.edu/~eschulte/
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2011-11-22 16:20 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-02-24 16:16 [PATCH] new babel latex feature :imagemagick Andreas Leha
2011-02-24 18:49 ` Eric S Fraga
2011-02-26 0:16 ` Eric Schulte
2011-02-28 9:28 ` Eric S Fraga
2011-02-26 0:13 ` Eric Schulte
2011-02-26 10:41 ` Andreas Leha
2011-02-26 16:06 ` Eric Schulte
2011-02-26 16:41 ` Eric Schulte
2011-06-28 20:52 ` Sebastien Vauban
2011-06-29 0:42 ` Eric Schulte
2011-11-22 10:37 ` Andreas Leha
2011-11-22 13:58 ` Eric Schulte
2011-02-26 0:13 ` Eric Schulte
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.