* Reading HTML mails with gnus
@ 2005-02-20 21:28 Rodolfo Medina
2005-02-20 23:12 ` Adam Duck
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Rodolfo Medina @ 2005-02-20 21:28 UTC (permalink / raw)
In order to read with Gnus that kind of mails
such as Internet adverts (is that HTML mails?),
I was suggested to install w3m-el (an interface of w3m).
After some difficulties I managed to get the installation up to end,
but still can't read HTML mails via gnus.
What am I missing?
Here are the steps I followed:
from http://www.hpl.hp.com/personal/Hans_Boehm/gc/
I downloaded the package gc.tar.gz
and copied it into the ~/tmp dir. Then,
# urpmi gcc
$ cd ~/tmp
$ tar xzvf gc.tar.gz
$ cd gc6.3
$ ./configure
$ make
$ make check
# make install
. I downloaded the package openssl-0.9.7e.tar.gz
and copied into my ~/tmp dir. Then,
$ cd ~/tmp
$ tar xzvf openssl-0.9.7e.tar.gz
$ cd openssl-0.9.7e
$ ./config
$ make
$ make test
# make install
. From http://prdownloads.sourceforge.net/w3m/
I downloaded the package w3m-0.5.1.tar.gz
and copied it into the ~/tmp dir. Then,
$ export LDFLAGS="-Xlinker -R/usr/local/lib"
$ cd ~/tmp
$ tar xzvf w3m-0.5.1.tar.gz
$ cd w3m-0.5.1
$ ./configure
$ make
# make install
. From http://emacs-w3m.namazu.org I downloaded the package
emacs-w3m-1.4.3.tar.gz and copied it into the ~/tmp dir. Then,
$ cd ~/tmp
$ tar xzvf emacs-w3m-1.4.3.tar.gz
$ cd emacs-w3m-1.4.3
$ ./configure
$ make
# make install
. I was suggested to put in my .gnus.el the line:
(setq mm-inline-text-html-renderer 'w3m)
, which I did. Besides, in the README file
which is in the emacs-w3m release it is suggested
to put in .emacs the line:
(require 'w3m-load)
. I did so, but when starting Emacs I got the following error message:
---------------------------------------------------------------
An error has occurred while loading `/home/rodolfo/.emacs':
File error: "Cannot open load file", "w3m-load"
To ensure normal operation, you should investigate the cause
of the error in your initialization file and remove it. Start
Emacs with the `--debug-init' option to view a complete error
backtrace
Loading places from ~/.emacs-places...
Loading places from /root/.emacs-places...done
----------------------------------------------------------------
. Then I canceled that line from .emacs,
but the HTML mails I get via gnus still cannot be viewed.
Can anyone from this list provide help?
Thanks indeed,
Rodolfo
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Reading HTML mails with gnus
2005-02-20 21:28 Rodolfo Medina
@ 2005-02-20 23:12 ` Adam Duck
2005-02-21 17:02 ` Rodolfo Medina
2005-02-25 15:52 ` Rodolfo Medina
2 siblings, 0 replies; 9+ messages in thread
From: Adam Duck @ 2005-02-20 23:12 UTC (permalink / raw)
"Rodolfo Medina" <romeomedina@libero.it> writes:
> from http://www.hpl.hp.com/personal/Hans_Boehm/gc/
> I downloaded the package gc.tar.gz
> and copied it into the ~/tmp dir. Then,
Ugh... what are you using? LFS? :)
> ---------------------------------------------------------------
> An error has occurred while loading `/home/rodolfo/.emacs':
>
> File error: "Cannot open load file", "w3m-load"
It seems, emacs won't find your emacs-w3m package. Did you install
emacs from a package from your vendor? Then it probably got into /usr
and emacs-w3m went to /usr/local ... although my auctex is in my
load-path (albeit being in /usr/local). So, could you post your
`load-path' variable (C-h v load-path RET) and the installation
directory of emacs-w3m?
bye, Adam.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Reading HTML mails with gnus
2005-02-20 21:28 Rodolfo Medina
2005-02-20 23:12 ` Adam Duck
@ 2005-02-21 17:02 ` Rodolfo Medina
2005-02-22 17:23 ` Adam Duck
2005-02-25 15:52 ` Rodolfo Medina
2 siblings, 1 reply; 9+ messages in thread
From: Rodolfo Medina @ 2005-02-21 17:02 UTC (permalink / raw)
Rodolfo Medina wrote:
> In order to read with Gnus that kind of mails
> such as Internet adverts (is that HTML mails?),
> I was suggested to install w3m-el (an interface of w3m).
> After some difficulties I managed to get the installation up to end,
> but still can't read HTML mails via gnus.
> What am I missing?
> Here are the steps I followed:
> [...]
> from http://www.hpl.hp.com/personal/Hans_Boehm/gc/
> I downloaded the package gc.tar.gz
> and copied it into the ~/tmp dir. Then,
Adam Duck wrote:
> Ugh... what are you using? LFS? :)
No, Mandrake 10.1 Community. Why?...
Rodolfo:
> . I was suggested to put in my .gnus.el the line:
> (setq mm-inline-text-html-renderer 'w3m)
> , which I did. Besides, in the README file
> which is in the emacs-w3m release it is suggested
> to put in .emacs the line:
> (require 'w3m-load)
> . I did so, but when starting Emacs I got the following error message:
>
> ---------------------------------------------------------------
> An error has occurred while loading `/home/rodolfo/.emacs':
>
> File error: "Cannot open load file", "w3m-load"
>
> To ensure normal operation, you should investigate the cause
> of the error in your initialization file and remove it. Start
> Emacs with the `--debug-init' option to view a complete error
> backtrace
> Loading places from ~/.emacs-places...
> Loading places from /root/.emacs-places...done
> ----------------------------------------------------------------
>
> . Then I canceled that line from .emacs,
> but the HTML mails I get via gnus still cannot be viewed.
Adam:
> It seems, emacs won't find your emacs-w3m package. Did you install
> emacs from a package from your vendor? Then it probably got into /usr
> and emacs-w3m went to /usr/local ... although my auctex is in my
> load-path (albeit being in /usr/local). So, could you post your
> `load-path' variable (C-h v load-path RET) and the installation
> directory of emacs-w3m?
Thanks, Adam.
This is the output of 'C-h v load-path RET':
----------------------------------------------------------------------------
---
load-path's value is
("/usr/share/emacs/site-lisp/Mule-UCS-current"
"/usr/share/emacs/21.3/site-lisp" "/usr/share/emacs/site-lisp"
"/usr/share/emacs/21.3/leim" "/usr/share/emacs/21.3/lisp"
"/usr/share/emacs/21.3/lisp/toolbar" "/usr/share/emacs/21.3/lisp/textmodes"
"/usr/share/emacs/21.3/lisp/progmodes" "/usr/share/emacs/21.3/lisp/play"
"/usr/share/emacs/21.3/lisp/obsolete" "/usr/share/emacs/21.3/lisp/net"
"/usr/share/emacs/21.3/lisp/mail" "/usr/share/emacs/21.3/lisp/language"
"/usr/share/emacs/21.3/lisp/international" "/usr/share/emacs/21.3/lisp/gnus"
"/usr/share/emacs/21.3/lisp/eshell" "/usr/share/emacs/21.3/lisp/emulation"
"/usr/share/emacs/21.3/lisp/emacs-lisp"
"/usr/share/emacs/21.3/lisp/calendar")
Documentation:
*List of directories to search for files to load.
Each element is a string (directory name) or nil (try default directory).
Initialized based on EMACSLOADPATH environment variable, if any,
otherwise to default specified by file `epaths.h' when Emacs was built.
----------------------------------------------------------------------------
-------
I searched the file w3m-load.el and found it in the directory
'/usr/share/emacs/site-lisp/w3m'. Then I put in my .emacs the lines:
(add-to-list 'load-path (expand-file-name "/usr/share/emacs/site-lisp/w3m"))
(require 'w3m-load)
and the above error message didn't appear any more.
But still, I can't view html images within gnus
(as I said above, I put in my .gnus.el the line:
(setq mm-inline-text-html-renderer 'w3m)
). Any other suggestion?
Thanks,
Rodolfo
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Reading HTML mails with gnus
[not found] <mailman.921.1109006604.32256.help-gnu-emacs@gnu.org>
@ 2005-02-21 17:44 ` Billy O'Connor
2006-08-18 13:58 ` Rodolfo Medina
0 siblings, 1 reply; 9+ messages in thread
From: Billy O'Connor @ 2005-02-21 17:44 UTC (permalink / raw)
"Rodolfo Medina" <romeomedina@libero.it> writes:
>> Here are the steps I followed:
>> [...]
>> from http://www.hpl.hp.com/personal/Hans_Boehm/gc/
>> I downloaded the package gc.tar.gz
>> and copied it into the ~/tmp dir. Then,
>
>
> Adam Duck wrote:
>
>> Ugh... what are you using? LFS? :)
>
>
> No, Mandrake 10.1 Community. Why?...
Yeah, why? ;)
--
Billy O'Connor
Editor, LFS/BLFS
http://www.linuxfromscratch.org
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Reading HTML mails with gnus
2005-02-21 17:02 ` Rodolfo Medina
@ 2005-02-22 17:23 ` Adam Duck
0 siblings, 0 replies; 9+ messages in thread
From: Adam Duck @ 2005-02-22 17:23 UTC (permalink / raw)
"Rodolfo Medina" <romeomedina@libero.it> writes:
> No, Mandrake 10.1 Community. Why?...
Because every Linux vendor has a gcc-package... you don't need to
compile it from scratch (except for LFS and gentoo :) ).
> I searched the file w3m-load.el and found it in the directory
> '/usr/share/emacs/site-lisp/w3m'. Then I put in my .emacs the lines:
>
> (add-to-list 'load-path (expand-file-name "/usr/share/emacs/site-lisp/w3m"))
> (require 'w3m-load)
Yep, that's the correct way.
> and the above error message didn't appear any more.
> But still, I can't view html images within gnus
> (as I said above, I put in my .gnus.el the line:
>
> (setq mm-inline-text-html-renderer 'w3m)
html images? Do you mean images inside html? This should work with
emacs-w3m -- except that you may need to tell this to w3m explicitly:
`w3m-default-display-inline-images' or press 'T' after it has started.
If you mean multipart/mime, then you have to go a different way --
this isn't handled through w3m. Also, gnus does like text/plain more
than text/html. So if an email contains both, you should think about
that, too.
bye, Adam.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Reading HTML mails with gnus
@ 2005-02-23 17:56 romeomedina
0 siblings, 0 replies; 9+ messages in thread
From: romeomedina @ 2005-02-23 17:56 UTC (permalink / raw)
Rodolfo Medina wrote:
> In order to read with Gnus that kind of mails
> such as Internet adverts (is that HTML mails?),
> I was suggested to install w3m-el (an interface of w3m).
> After some difficulties I managed to get the installation up to end,
> but still can't read HTML images via gnus.
> What am I missing?
Adam Duck wrote:
> html images? Do you mean images inside html?
Yeah, I think so: that kind of mails such internet adverts and so...
Adam:
> This should work with emacs-w3m -- except that you may need
> to tell this to w3m explicitly:
> `w3m-default-display-inline-images'
I tried and put in my .gnus the line:
(w3m-default-display-inline-images)
, but got the error message:
Error in ~/.gnus: (void-function w3m-default-display-inline-images)
. Also, I put in .gnus the following:
(setq mm-text-html-renderer 'w3m)
(setq mm-inline-text-html-with-images t)
, with no result either. In my .emacs there's still:
(add-to-list 'load-path (expand-file-name "/usr/share/emacs/site-lisp/w3m"))
(require 'w3m-load)
Do you have any other suggestion?
I'm quite stuck: even from emacs-w3m mailing list I didn't get any
help in this concern up to now.
Thanks,
Rodolfo
____________________________________________________________
6X velocizzare la tua navigazione a 56k? 6X Web Accelerator di Libero!
Scaricalo su INTERNET GRATIS 6X http://www.libero.it
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Reading HTML mails with gnus
2005-02-20 21:28 Rodolfo Medina
2005-02-20 23:12 ` Adam Duck
2005-02-21 17:02 ` Rodolfo Medina
@ 2005-02-25 15:52 ` Rodolfo Medina
2 siblings, 0 replies; 9+ messages in thread
From: Rodolfo Medina @ 2005-02-25 15:52 UTC (permalink / raw)
Rodolfo Medina wrote:
> In order to read with Gnus that kind of mails
> such as Internet adverts (is that HTML mails?),
> I was suggested to install w3m-el (an interface of w3m).
> After some difficulties I managed to get the installation up to end,
> but still can't read HTML images via gnus.
> What am I missing?
Adam Duck wrote:
> html images? Do you mean images inside html? This should work with
> emacs-w3m -- except that you may need to tell this to w3m explicitly:
> `w3m-default-display-inline-images'
Nick wrote:
> w3m-default-display-inline-images is a variable, not a function,
> so you just need to set it:
>
> (setq w3m-default-display-inline-images t)
>
> will set its value to t.
Thanks, Adam, thanks, Nick.
I put in my .gnus.el the line:
(setq w3m-default-display-inline-images t)
but STILL can't view html images with gnus.
I didn't think it'd be so difficult!
In my .gnus there's also:
(setq mm-text-html-renderer 'w3m)
(setq mm-inline-text-html-with-images t)
, and in my .emacs there is:
(add-to-list 'load-path (expand-file-name "/usr/share/emacs/site-lisp/w3m"))
(require 'w3m-load)
(require 'w3m-image)
. I also tried with:
(setq mm-w3m-safe-url-regexp nil)
in .gnus, but nothing of nothing. I'm almost desperate.
Do you have any other suggestion?
Thanks,
Rodolfo
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Reading HTML mails with gnus
@ 2005-02-26 12:38 romeomedina
0 siblings, 0 replies; 9+ messages in thread
From: romeomedina @ 2005-02-26 12:38 UTC (permalink / raw)
Rodolfo wrote:
> In order to read with Gnus that kind of mails
> such as Internet adverts (is that HTML mails?),
> I was suggested to install w3m-el (an interface of w3m).
> After some difficulties I managed to get the installation up to end,
> but still can't read HTML images via gnus.
> What am I missing?
> In my .gnus there is:
>
> (setq mm-text-html-renderer 'w3m)
> (setq mm-inline-text-html-with-images t)
> (setq w3m-default-display-inline-images t)
>
> , and in my .emacs there is:
>
> (add-to-list 'load-path (expand-file-name "/usr/share/emacs/site-lisp/w3m"))
> (require 'w3m-load)
> (require 'w3m-image)
>
> . I also tried with:
>
> (setq mm-w3m-safe-url-regexp nil)
>
> in .gnus, but nothing of nothing. I didn't think it'd be so difficult!
Nick wrote:
> You may have to set the variable 'w3m-default-display-inline-images'
> in a hook - try setting it in the w3m init file:
>
> ~/.emacs-w3m
>
> I just tried this and it works for me.
Thanks, Nick.
I created the file ~/.emacs-w3m and put in it the line:
(setq w3m-default-display-inline-images t)
, but it didn't help. :(
Nick:
> In any case, if I do M-x w3m, I can then toggle inline images with
> T. Does that work for you? Pressing T changes the display of the
> emacs-w3m link in the welcome message.
*Where* do you do 'M-x w3m'? Before 'M-x gnus' or after?
*Where* do you do 'T'? In gnus's Group buffer?
I tried and did 'M-x w3m' and 'T' everywhere,
but still can't view html images with gnus!
Any other suggestion?
Rodolfo
____________________________________________________________
Navighi a 2 MEGA e i primi 3 mesi sono GRATIS.
Scegli Libero Adsl Flat senza limiti su http://www.libero.it
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Reading HTML mails with gnus
2005-02-21 17:44 ` Reading HTML mails with gnus Billy O'Connor
@ 2006-08-18 13:58 ` Rodolfo Medina
0 siblings, 0 replies; 9+ messages in thread
From: Rodolfo Medina @ 2006-08-18 13:58 UTC (permalink / raw)
Cc: billyoc
On Feb 21 2005 "Rodolfo Medina" writes:
>>> Here are the steps I followed:
>>> [...]
>>> from http://www.hpl.hp.com/personal/Hans_Boehm/gc/
>>> I downloaded the package gc.tar.gz
>>> and copied it into the ~/tmp dir. Then,
Adam Duck wrote:
>>> Ugh... what are you using? LFS? :)
Rodolfo:
>> No, Mandrake 10.1 Community. Why?...
Billy O'Connor <billyoc@gnuyork.org> writes:
> Yeah, why? ;)
Hi, Billy:
what did you mean?
Rodolfo
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2006-08-18 13:58 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <mailman.921.1109006604.32256.help-gnu-emacs@gnu.org>
2005-02-21 17:44 ` Reading HTML mails with gnus Billy O'Connor
2006-08-18 13:58 ` Rodolfo Medina
2005-02-26 12:38 romeomedina
-- strict thread matches above, loose matches on Subject: below --
2005-02-23 17:56 romeomedina
2005-02-20 21:28 Rodolfo Medina
2005-02-20 23:12 ` Adam Duck
2005-02-21 17:02 ` Rodolfo Medina
2005-02-22 17:23 ` Adam Duck
2005-02-25 15:52 ` Rodolfo Medina
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.