all messages for Emacs-related lists mirrored at yhetil.org
 help / color / mirror / code / Atom feed
* emacs won't open files at startup from command line
@ 2009-10-28 17:30 J. David Boyd
  2009-10-28 19:54 ` Tyler Smith
       [not found] ` <mailman.9647.1256759713.2239.help-gnu-emacs@gnu.org>
  0 siblings, 2 replies; 17+ messages in thread
From: J. David Boyd @ 2009-10-28 17:30 UTC (permalink / raw)
  To: help-gnu-emacs


I could use some help troubleshooting this.  

I've been using emacs for years, and years, right now I'm running it on
cygwin, under Windows XP Pro.

When I start up emacs, it doesn't load the files I name on the command
line, unless I do an 'emacs -q' to not load any init files.

Obviously, it must be something in my .emacs file, but I don't see
anything that I've changed in the recent past.

Where should I start to debug this?  I don't get any errors when it
runs, it just refuses to load anything from the command line.

Emacs is GNU Emacs 23.1.1 (i686-pc-cygwin, X toolkit, Xaw3d scroll bars)
of 2009-08-03.

Emacsclient works fine, Ctl-X f works fine.  

Could this be from an error I missed at compile time?  Any ideas?

Dave in Largo, FL





^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: emacs won't open files at startup from command line
  2009-10-28 17:30 emacs won't open files at startup from command line J. David Boyd
@ 2009-10-28 19:54 ` Tyler Smith
  2009-10-29 16:35   ` J. David Boyd
       [not found] ` <mailman.9647.1256759713.2239.help-gnu-emacs@gnu.org>
  1 sibling, 1 reply; 17+ messages in thread
From: Tyler Smith @ 2009-10-28 19:54 UTC (permalink / raw)
  To: help-gnu-emacs

david@adboyd.com (J. David Boyd) writes:

> I could use some help troubleshooting this.  
>
> When I start up emacs, it doesn't load the files I name on the command
> line, unless I do an 'emacs -q' to not load any init files.
>
> Obviously, it must be something in my .emacs file, but I don't see
> anything that I've changed in the recent past.
>
> Where should I start to debug this?  I don't get any errors when it
> runs, it just refuses to load anything from the command line.

At the risk of stating the obvious, have you tried commenting out all of
your .emacs, then progressively uncommenting it to isolate the lines
that are causing the problem? comment-region (aka M-;) makes this
pretty quick to do.

Cheers,

Tyler





^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: emacs won't open files at startup from command line
       [not found] ` <mailman.9647.1256759713.2239.help-gnu-emacs@gnu.org>
@ 2009-10-28 21:21   ` Pascal J. Bourguignon
  2009-10-29 16:36     ` J. David Boyd
  0 siblings, 1 reply; 17+ messages in thread
From: Pascal J. Bourguignon @ 2009-10-28 21:21 UTC (permalink / raw)
  To: help-gnu-emacs

Tyler Smith <tyler.smith@eku.edu> writes:

> david@adboyd.com (J. David Boyd) writes:
>
>> I could use some help troubleshooting this.  
>>
>> When I start up emacs, it doesn't load the files I name on the command
>> line, unless I do an 'emacs -q' to not load any init files.
>>
>> Obviously, it must be something in my .emacs file, but I don't see
>> anything that I've changed in the recent past.
>>
>> Where should I start to debug this?  I don't get any errors when it
>> runs, it just refuses to load anything from the command line.
>
> At the risk of stating the obvious, have you tried commenting out all of
> your .emacs, then progressively uncommenting it to isolate the lines
> that are causing the problem? comment-region (aka M-;) makes this
> pretty quick to do.

Also, the OP could try:

    emacs --debug-init file.txt

If the file is not open it might be because there's a bug in ~/.emacs

-- 
__Pascal Bourguignon__


^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: emacs won't open files at startup from command line
  2009-10-28 19:54 ` Tyler Smith
@ 2009-10-29 16:35   ` J. David Boyd
  2009-10-29 18:56     ` Tassilo Horn
  0 siblings, 1 reply; 17+ messages in thread
From: J. David Boyd @ 2009-10-29 16:35 UTC (permalink / raw)
  To: help-gnu-emacs

Tyler Smith <tyler.smith@eku.edu> writes:

> david@adboyd.com (J. David Boyd) writes:
>
>> I could use some help troubleshooting this.  
>>
>> When I start up emacs, it doesn't load the files I name on the command
>> line, unless I do an 'emacs -q' to not load any init files.
>>
>> Obviously, it must be something in my .emacs file, but I don't see
>> anything that I've changed in the recent past.
>>
>> Where should I start to debug this?  I don't get any errors when it
>> runs, it just refuses to load anything from the command line.
>
> At the risk of stating the obvious, have you tried commenting out all of
> your .emacs, then progressively uncommenting it to isolate the lines
> that are causing the problem? comment-region (aka M-;) makes this
> pretty quick to do.
>
> Cheers,
>
> Tyler


Been trying to avoid that.  I was hoping that it was a compilation error
of some kind, and that this message would spark someone's memory into
remembering "oh yeah, I heard about that...".

But, what you said is what I suppose I'll have to do...

Thanks for the reminder of the obvious!

Dave





^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: emacs won't open files at startup from command line
  2009-10-28 21:21   ` Pascal J. Bourguignon
@ 2009-10-29 16:36     ` J. David Boyd
  2009-10-30 17:07       ` J. David Boyd
  2009-10-30 19:53       ` J. David Boyd
  0 siblings, 2 replies; 17+ messages in thread
From: J. David Boyd @ 2009-10-29 16:36 UTC (permalink / raw)
  To: help-gnu-emacs

pjb@informatimago.com (Pascal J. Bourguignon) writes:

> Tyler Smith <tyler.smith@eku.edu> writes:
>
>> david@adboyd.com (J. David Boyd) writes:
>>
>>> I could use some help troubleshooting this.  
>>>
>>> When I start up emacs, it doesn't load the files I name on the command
>>> line, unless I do an 'emacs -q' to not load any init files.
>>>
>>> Obviously, it must be something in my .emacs file, but I don't see
>>> anything that I've changed in the recent past.
>>>
>>> Where should I start to debug this?  I don't get any errors when it
>>> runs, it just refuses to load anything from the command line.
>>
>> At the risk of stating the obvious, have you tried commenting out all of
>> your .emacs, then progressively uncommenting it to isolate the lines
>> that are causing the problem? comment-region (aka M-;) makes this
>> pretty quick to do.
>
> Also, the OP could try:
>
>     emacs --debug-init file.txt
>
> If the file is not open it might be because there's a bug in ~/.emacs


That I have tried.  No errors at all...  I was hoping that there would
be one, but everything loads just fine, no errors, just doesn't load the
file(s) named on the command line.

Thanks for the idea, though.





^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: emacs won't open files at startup from command line
  2009-10-29 16:35   ` J. David Boyd
@ 2009-10-29 18:56     ` Tassilo Horn
  2009-10-30 14:33       ` J. David Boyd
  0 siblings, 1 reply; 17+ messages in thread
From: Tassilo Horn @ 2009-10-29 18:56 UTC (permalink / raw)
  To: help-gnu-emacs

david@adboyd.com (J. David Boyd) writes:

Hi Dave,

> Been trying to avoid that.  I was hoping that it was a compilation
> error of some kind,...

if it was, then you would have some error message in the *Messages*
buffer after startup.  You could also start emacs as "emacs
--debug-init" to get a backtrace of the error.

,----[ (info "(emacs)Initial Options") ]
| `--debug-init'
|      Enable the Emacs Lisp debugger for errors in the init file.  *Note
|      Entering the Debugger on an Error: (elisp)Error Debugging.
`----


Bye,
Tassilo





^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: emacs won't open files at startup from command line
  2009-10-29 18:56     ` Tassilo Horn
@ 2009-10-30 14:33       ` J. David Boyd
  0 siblings, 0 replies; 17+ messages in thread
From: J. David Boyd @ 2009-10-30 14:33 UTC (permalink / raw)
  To: help-gnu-emacs


Tassilo Horn <tassilo@member.fsf.org> writes:

> david@adboyd.com (J. David Boyd) writes:
>
> Hi Dave,
>
>> Been trying to avoid that.  I was hoping that it was a compilation
>> error of some kind,...
>
> if it was, then you would have some error message in the *Messages*
> buffer after startup.  You could also start emacs as "emacs
> --debug-init" to get a backtrace of the error.
>
> ,----[ (info "(emacs)Initial Options") ]
> | `--debug-init'
> |      Enable the Emacs Lisp debugger for errors in the init file.  *Note
> |      Entering the Debugger on an Error: (elisp)Error Debugging.
> `----
>
>
> Bye,
> Tassilo


No, I don't mean compilation of the .el or .emacs file.  I mean that,
when I compiled this from code, that maybe there was an error in the
piece that reads the command line to load the file, and I missed the
error message going by.   

I think, just to be on the safe side, first I'll recompile it, and catch
the output into a file.

If that abides me nothing, I'll have to start commenting out my .emacs,
a line at a time.

Thanks,

Dave





^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: emacs won't open files at startup from command line
  2009-10-29 16:36     ` J. David Boyd
@ 2009-10-30 17:07       ` J. David Boyd
  2009-10-30 17:21         ` Eli Zaretskii
  2009-10-30 19:53       ` J. David Boyd
  1 sibling, 1 reply; 17+ messages in thread
From: J. David Boyd @ 2009-10-30 17:07 UTC (permalink / raw)
  To: help-gnu-emacs

david@adboyd.com (J. David Boyd) writes:

> pjb@informatimago.com (Pascal J. Bourguignon) writes:
>
>> Tyler Smith <tyler.smith@eku.edu> writes:
>>
>>> david@adboyd.com (J. David Boyd) writes:
>>>
>>>> I could use some help troubleshooting this.  
>>>>
>>>> When I start up emacs, it doesn't load the files I name on the command
>>>> line, unless I do an 'emacs -q' to not load any init files.
>>>>
>>>> Obviously, it must be something in my .emacs file, but I don't see
>>>> anything that I've changed in the recent past.
>>>>
>>>> Where should I start to debug this?  I don't get any errors when it
>>>> runs, it just refuses to load anything from the command line.
>>>
>>> At the risk of stating the obvious, have you tried commenting out all of
>>> your .emacs, then progressively uncommenting it to isolate the lines
>>> that are causing the problem? comment-region (aka M-;) makes this
>>> pretty quick to do.
>>
>> Also, the OP could try:
>>
>>     emacs --debug-init file.txt
>>
>> If the file is not open it might be because there's a bug in ~/.emacs
>
>
> That I have tried.  No errors at all...  I was hoping that there would
> be one, but everything loads just fine, no errors, just doesn't load the
> file(s) named on the command line.
>
> Thanks for the idea, though.

Anyone have any idea which variable in emacs contains the command line?
I'd like to dump it at various points in my .emacs file, and see when it
is getting wiped clean, if that is what is happening...

Dave





^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: emacs won't open files at startup from command line
  2009-10-30 17:07       ` J. David Boyd
@ 2009-10-30 17:21         ` Eli Zaretskii
  0 siblings, 0 replies; 17+ messages in thread
From: Eli Zaretskii @ 2009-10-30 17:21 UTC (permalink / raw)
  To: help-gnu-emacs

> From: david@adboyd.com (J. David Boyd)
> Date: Fri, 30 Oct 2009 13:07:37 -0400
> 
> Anyone have any idea which variable in emacs contains the command line?

It's called `command-line-args', not surprisingly.




^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: emacs won't open files at startup from command line
  2009-10-29 16:36     ` J. David Boyd
  2009-10-30 17:07       ` J. David Boyd
@ 2009-10-30 19:53       ` J. David Boyd
  2009-10-30 20:35         ` Lennart Borgman
  1 sibling, 1 reply; 17+ messages in thread
From: J. David Boyd @ 2009-10-30 19:53 UTC (permalink / raw)
  To: help-gnu-emacs

david@adboyd.com (J. David Boyd) writes:

> pjb@informatimago.com (Pascal J. Bourguignon) writes:
>
>> Tyler Smith <tyler.smith@eku.edu> writes:
>>
>>> david@adboyd.com (J. David Boyd) writes:
>>>
>>>> I could use some help troubleshooting this.  
>>>>
>>>> When I start up emacs, it doesn't load the files I name on the command
>>>> line, unless I do an 'emacs -q' to not load any init files.
>>>>
>>>> Obviously, it must be something in my .emacs file, but I don't see
>>>> anything that I've changed in the recent past.
>>>>
>>>> Where should I start to debug this?  I don't get any errors when it
>>>> runs, it just refuses to load anything from the command line.
>>>
>>> At the risk of stating the obvious, have you tried commenting out all of
>>> your .emacs, then progressively uncommenting it to isolate the lines
>>> that are causing the problem? comment-region (aka M-;) makes this
>>> pretty quick to do.
>>
>> Also, the OP could try:
>>
>>     emacs --debug-init file.txt
>>
>> If the file is not open it might be because there's a bug in ~/.emacs
>
>
> That I have tried.  No errors at all...  I was hoping that there would
> be one, but everything loads just fine, no errors, just doesn't load the
> file(s) named on the command line.
>
> Thanks for the idea, though.

Found it!  I've been calling table.el for years, but somehow it must be
incompatible with emacs 23.1.1.  Took that out, works great.  Never used
the functionality in it anyway...

Dave





^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: emacs won't open files at startup from command line
  2009-10-30 19:53       ` J. David Boyd
@ 2009-10-30 20:35         ` Lennart Borgman
  2009-11-04  6:06           ` Kevin Rodgers
  2009-11-04 14:53           ` Dan Nicolaescu
  0 siblings, 2 replies; 17+ messages in thread
From: Lennart Borgman @ 2009-10-30 20:35 UTC (permalink / raw)
  To: J. David Boyd; +Cc: emacs help, Emacs-Devel devel

On Fri, Oct 30, 2009 at 8:53 PM, J. David Boyd <david@adboyd.com> wrote:
> david@adboyd.com (J. David Boyd) writes:
>
>> pjb@informatimago.com (Pascal J. Bourguignon) writes:
>>
>>> Tyler Smith <tyler.smith@eku.edu> writes:
>>>
>>>> david@adboyd.com (J. David Boyd) writes:
>>>>
>>>>> I could use some help troubleshooting this.
>>>>>
>>>>> When I start up emacs, it doesn't load the files I name on the command
>>>>> line, unless I do an 'emacs -q' to not load any init files.
>>>>>
>>>>> Obviously, it must be something in my .emacs file, but I don't see
>>>>> anything that I've changed in the recent past.
>>>>>
>>>>> Where should I start to debug this?  I don't get any errors when it
>>>>> runs, it just refuses to load anything from the command line.
>>>>
>>>> At the risk of stating the obvious, have you tried commenting out all of
>>>> your .emacs, then progressively uncommenting it to isolate the lines
>>>> that are causing the problem? comment-region (aka M-;) makes this
>>>> pretty quick to do.
>>>
>>> Also, the OP could try:
>>>
>>>     emacs --debug-init file.txt
>>>
>>> If the file is not open it might be because there's a bug in ~/.emacs
>>
>>
>> That I have tried.  No errors at all...  I was hoping that there would
>> be one, but everything loads just fine, no errors, just doesn't load the
>> file(s) named on the command line.
>>
>> Thanks for the idea, though.
>
> Found it!  I've been calling table.el for years, but somehow it must be
> incompatible with emacs 23.1.1.  Took that out, works great.  Never used
> the functionality in it anyway...
>
> Dave


The file table.el is included in Emacs now.

This is not the first time I have seen quite interesting side effects
from using old versions of a file that has later been included in
Emacs. I think that some test should be made after startup for
potential such loadings. (This could be run conditionally after all
init files.)




^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: emacs won't open files at startup from command line
  2009-10-30 20:35         ` Lennart Borgman
@ 2009-11-04  6:06           ` Kevin Rodgers
  2009-11-04  9:45             ` Lennart Borgman
  2009-11-04 20:32             ` J. David Boyd
  2009-11-04 14:53           ` Dan Nicolaescu
  1 sibling, 2 replies; 17+ messages in thread
From: Kevin Rodgers @ 2009-11-04  6:06 UTC (permalink / raw)
  To: emacs-devel; +Cc: help-gnu-emacs

Lennart Borgman wrote:
> On Fri, Oct 30, 2009 at 8:53 PM, J. David Boyd <david@adboyd.com> wrote:
...
>> Found it!  I've been calling table.el for years, but somehow it must be
>> incompatible with emacs 23.1.1.  Took that out, works great.  Never used
>> the functionality in it anyway...
> 
> The file table.el is included in Emacs now.
> 
> This is not the first time I have seen quite interesting side effects
> from using old versions of a file that has later been included in
> Emacs. I think that some test should be made after startup for
> potential such loadings. (This could be run conditionally after all
> init files.)

`list-load-path-shadows' is what you want.

-- 
Kevin Rodgers
Denver, Colorado, USA





^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: emacs won't open files at startup from command line
  2009-11-04  6:06           ` Kevin Rodgers
@ 2009-11-04  9:45             ` Lennart Borgman
  2009-11-04 20:32             ` J. David Boyd
  1 sibling, 0 replies; 17+ messages in thread
From: Lennart Borgman @ 2009-11-04  9:45 UTC (permalink / raw)
  To: Kevin Rodgers; +Cc: help-gnu-emacs, emacs-devel

On Wed, Nov 4, 2009 at 7:06 AM, Kevin Rodgers <kevin.d.rodgers@gmail.com> wrote:
> Lennart Borgman wrote:
>>
>> On Fri, Oct 30, 2009 at 8:53 PM, J. David Boyd <david@adboyd.com> wrote:
>
> ...
>>>
>>> Found it!  I've been calling table.el for years, but somehow it must be
>>> incompatible with emacs 23.1.1.  Took that out, works great.  Never used
>>> the functionality in it anyway...
>>
>> The file table.el is included in Emacs now.
>>
>> This is not the first time I have seen quite interesting side effects
>> from using old versions of a file that has later been included in
>> Emacs. I think that some test should be made after startup for
>> potential such loadings. (This could be run conditionally after all
>> init files.)
>
> `list-load-path-shadows' is what you want.


You mean something that checks this variable after default.el have
been loaded? Yes.




^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: emacs won't open files at startup from command line
  2009-10-30 20:35         ` Lennart Borgman
  2009-11-04  6:06           ` Kevin Rodgers
@ 2009-11-04 14:53           ` Dan Nicolaescu
  2009-11-04 14:57             ` Lennart Borgman
  1 sibling, 1 reply; 17+ messages in thread
From: Dan Nicolaescu @ 2009-11-04 14:53 UTC (permalink / raw)
  To: Lennart Borgman; +Cc: emacs help, J. David Boyd, Emacs-Devel devel

Lennart Borgman <lennart.borgman@gmail.com> writes:

  > On Fri, Oct 30, 2009 at 8:53 PM, J. David Boyd <david@adboyd.com> wrote:
  > > david@adboyd.com (J. David Boyd) writes:
  > >
  > >> pjb@informatimago.com (Pascal J. Bourguignon) writes:
  > >>
  > >>> Tyler Smith <tyler.smith@eku.edu> writes:
  > >>>
  > >>>> david@adboyd.com (J. David Boyd) writes:
  > >>>>
  > >>>>> I could use some help troubleshooting this.
  > >>>>>
  > >>>>> When I start up emacs, it doesn't load the files I name on the command
  > >>>>> line, unless I do an 'emacs -q' to not load any init files.
  > >>>>>
  > >>>>> Obviously, it must be something in my .emacs file, but I don't see
  > >>>>> anything that I've changed in the recent past.
  > >>>>>
  > >>>>> Where should I start to debug this?  I don't get any errors when it
  > >>>>> runs, it just refuses to load anything from the command line.
  > >>>>
  > >>>> At the risk of stating the obvious, have you tried commenting out all of
  > >>>> your .emacs, then progressively uncommenting it to isolate the lines
  > >>>> that are causing the problem? comment-region (aka M-;) makes this
  > >>>> pretty quick to do.
  > >>>
  > >>> Also, the OP could try:
  > >>>
  > >>>     emacs --debug-init file.txt
  > >>>
  > >>> If the file is not open it might be because there's a bug in ~/.emacs
  > >>
  > >>
  > >> That I have tried.  No errors at all...  I was hoping that there would
  > >> be one, but everything loads just fine, no errors, just doesn't load the
  > >> file(s) named on the command line.
  > >>
  > >> Thanks for the idea, though.
  > >
  > > Found it!  I've been calling table.el for years, but somehow it must be
  > > incompatible with emacs 23.1.1.  Took that out, works great.  Never used
  > > the functionality in it anyway...
  > >
  > > Dave
  > 
  > 
  > The file table.el is included in Emacs now.
  > 
  > This is not the first time I have seen quite interesting side effects
  > from using old versions of a file that has later been included in
  > Emacs. I think that some test should be made after startup for
  > potential such loadings. (This could be run conditionally after all
  > init files.)

See `bad-packages-alist'




^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: emacs won't open files at startup from command line
  2009-11-04 14:53           ` Dan Nicolaescu
@ 2009-11-04 14:57             ` Lennart Borgman
  2009-11-04 15:05               ` Dan Nicolaescu
  0 siblings, 1 reply; 17+ messages in thread
From: Lennart Borgman @ 2009-11-04 14:57 UTC (permalink / raw)
  To: Dan Nicolaescu; +Cc: emacs help, J. David Boyd, Emacs-Devel devel

On Wed, Nov 4, 2009 at 3:53 PM, Dan Nicolaescu <dann@ics.uci.edu> wrote:
> Lennart Borgman <lennart.borgman@gmail.com> writes:
>
>  > On Fri, Oct 30, 2009 at 8:53 PM, J. David Boyd <david@adboyd.com> wrote:
>  > > david@adboyd.com (J. David Boyd) writes:
>  > >
>  > >> pjb@informatimago.com (Pascal J. Bourguignon) writes:
>  > >>
>  > >>> Tyler Smith <tyler.smith@eku.edu> writes:
>  > >>>
>  > >>>> david@adboyd.com (J. David Boyd) writes:
>  > >>>>
>  > >>>>> I could use some help troubleshooting this.
>  > >>>>>
>  > >>>>> When I start up emacs, it doesn't load the files I name on the command
>  > >>>>> line, unless I do an 'emacs -q' to not load any init files.
>  > >>>>>
>  > >>>>> Obviously, it must be something in my .emacs file, but I don't see
>  > >>>>> anything that I've changed in the recent past.
>  > >>>>>
>  > >>>>> Where should I start to debug this?  I don't get any errors when it
>  > >>>>> runs, it just refuses to load anything from the command line.
>  > >>>>
>  > >>>> At the risk of stating the obvious, have you tried commenting out all of
>  > >>>> your .emacs, then progressively uncommenting it to isolate the lines
>  > >>>> that are causing the problem? comment-region (aka M-;) makes this
>  > >>>> pretty quick to do.
>  > >>>
>  > >>> Also, the OP could try:
>  > >>>
>  > >>>     emacs --debug-init file.txt
>  > >>>
>  > >>> If the file is not open it might be because there's a bug in ~/.emacs
>  > >>
>  > >>
>  > >> That I have tried.  No errors at all...  I was hoping that there would
>  > >> be one, but everything loads just fine, no errors, just doesn't load the
>  > >> file(s) named on the command line.
>  > >>
>  > >> Thanks for the idea, though.
>  > >
>  > > Found it!  I've been calling table.el for years, but somehow it must be
>  > > incompatible with emacs 23.1.1.  Took that out, works great.  Never used
>  > > the functionality in it anyway...
>  > >
>  > > Dave
>  >
>  >
>  > The file table.el is included in Emacs now.
>  >
>  > This is not the first time I have seen quite interesting side effects
>  > from using old versions of a file that has later been included in
>  > Emacs. I think that some test should be made after startup for
>  > potential such loadings. (This could be run conditionally after all
>  > init files.)
>
> See `bad-packages-alist'
>

Ah, thanks, forgot about it.

Should not table.el be in this list too then?
And nxml too?




^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: emacs won't open files at startup from command line
  2009-11-04 14:57             ` Lennart Borgman
@ 2009-11-04 15:05               ` Dan Nicolaescu
  0 siblings, 0 replies; 17+ messages in thread
From: Dan Nicolaescu @ 2009-11-04 15:05 UTC (permalink / raw)
  To: Lennart Borgman; +Cc: emacs help, J. David Boyd, Emacs-Devel devel

Lennart Borgman <lennart.borgman@gmail.com> writes:

  > On Wed, Nov 4, 2009 at 3:53 PM, Dan Nicolaescu <dann@ics.uci.edu> wrote:
  > > Lennart Borgman <lennart.borgman@gmail.com> writes:
  > >
  > >  > On Fri, Oct 30, 2009 at 8:53 PM, J. David Boyd <david@adboyd.com> wrote:
  > >  > > david@adboyd.com (J. David Boyd) writes:
  > >  > >
  > >  > >> pjb@informatimago.com (Pascal J. Bourguignon) writes:
  > >  > >>
  > >  > >>> Tyler Smith <tyler.smith@eku.edu> writes:
  > >  > >>>
  > >  > >>>> david@adboyd.com (J. David Boyd) writes:
  > >  > >>>>
  > >  > >>>>> I could use some help troubleshooting this.
  > >  > >>>>>
  > >  > >>>>> When I start up emacs, it doesn't load the files I name on the command
  > >  > >>>>> line, unless I do an 'emacs -q' to not load any init files.
  > >  > >>>>>
  > >  > >>>>> Obviously, it must be something in my .emacs file, but I don't see
  > >  > >>>>> anything that I've changed in the recent past.
  > >  > >>>>>
  > >  > >>>>> Where should I start to debug this?  I don't get any errors when it
  > >  > >>>>> runs, it just refuses to load anything from the command line.
  > >  > >>>>
  > >  > >>>> At the risk of stating the obvious, have you tried commenting out all of
  > >  > >>>> your .emacs, then progressively uncommenting it to isolate the lines
  > >  > >>>> that are causing the problem? comment-region (aka M-;) makes this
  > >  > >>>> pretty quick to do.
  > >  > >>>
  > >  > >>> Also, the OP could try:
  > >  > >>>
  > >  > >>>     emacs --debug-init file.txt
  > >  > >>>
  > >  > >>> If the file is not open it might be because there's a bug in ~/.emacs
  > >  > >>
  > >  > >>
  > >  > >> That I have tried.  No errors at all...  I was hoping that there would
  > >  > >> be one, but everything loads just fine, no errors, just doesn't load the
  > >  > >> file(s) named on the command line.
  > >  > >>
  > >  > >> Thanks for the idea, though.
  > >  > >
  > >  > > Found it!  I've been calling table.el for years, but somehow it must be
  > >  > > incompatible with emacs 23.1.1.  Took that out, works great.  Never used
  > >  > > the functionality in it anyway...
  > >  > >
  > >  > > Dave
  > >  >
  > >  >
  > >  > The file table.el is included in Emacs now.
  > >  >
  > >  > This is not the first time I have seen quite interesting side effects
  > >  > from using old versions of a file that has later been included in
  > >  > Emacs. I think that some test should be made after startup for
  > >  > potential such loadings. (This could be run conditionally after all
  > >  > init files.)
  > >
  > > See `bad-packages-alist'
  > >
  > 
  > Ah, thanks, forgot about it.
  > 
  > Should not table.el be in this list too then?
  > And nxml too?

If they cause problems, they should.




^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: emacs won't open files at startup from command line
  2009-11-04  6:06           ` Kevin Rodgers
  2009-11-04  9:45             ` Lennart Borgman
@ 2009-11-04 20:32             ` J. David Boyd
  1 sibling, 0 replies; 17+ messages in thread
From: J. David Boyd @ 2009-11-04 20:32 UTC (permalink / raw)
  To: emacs-devel; +Cc: help-gnu-emacs

Kevin Rodgers <kevin.d.rodgers@gmail.com> writes:

> Lennart Borgman wrote:
>> On Fri, Oct 30, 2009 at 8:53 PM, J. David Boyd <david@adboyd.com> wrote:
> ...
>>> Found it!  I've been calling table.el for years, but somehow it must be
>>> incompatible with emacs 23.1.1.  Took that out, works great.  Never used
>>> the functionality in it anyway...
>>
>> The file table.el is included in Emacs now.
>>
>> This is not the first time I have seen quite interesting side effects
>> from using old versions of a file that has later been included in
>> Emacs. I think that some test should be made after startup for
>> potential such loadings. (This could be run conditionally after all
>> init files.)
>
> `list-load-path-shadows' is what you want.


Hey, that _is_ what I want!  Cool, thanks, that will help me clean up my
.emacs file immensely...






^ permalink raw reply	[flat|nested] 17+ messages in thread

end of thread, other threads:[~2009-11-04 20:32 UTC | newest]

Thread overview: 17+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-28 17:30 emacs won't open files at startup from command line J. David Boyd
2009-10-28 19:54 ` Tyler Smith
2009-10-29 16:35   ` J. David Boyd
2009-10-29 18:56     ` Tassilo Horn
2009-10-30 14:33       ` J. David Boyd
     [not found] ` <mailman.9647.1256759713.2239.help-gnu-emacs@gnu.org>
2009-10-28 21:21   ` Pascal J. Bourguignon
2009-10-29 16:36     ` J. David Boyd
2009-10-30 17:07       ` J. David Boyd
2009-10-30 17:21         ` Eli Zaretskii
2009-10-30 19:53       ` J. David Boyd
2009-10-30 20:35         ` Lennart Borgman
2009-11-04  6:06           ` Kevin Rodgers
2009-11-04  9:45             ` Lennart Borgman
2009-11-04 20:32             ` J. David Boyd
2009-11-04 14:53           ` Dan Nicolaescu
2009-11-04 14:57             ` Lennart Borgman
2009-11-04 15:05               ` Dan Nicolaescu

Code repositories for project(s) associated with this external index

	https://git.savannah.gnu.org/cgit/emacs.git
	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.