* make update fails
@ 2012-04-23 12:17 Detlef Steuer
2012-04-23 12:25 ` Rainer M Krug
2012-04-23 16:25 ` Achim Gratz
0 siblings, 2 replies; 11+ messages in thread
From: Detlef Steuer @ 2012-04-23 12:17 UTC (permalink / raw)
To: emacs-orgmode
Did a fresh pull
git clone git://orgmode.org/org-mode.git
after
make update
failed with some errors.
Did an
make update
immediately after pulling and ended there:
mkdir -p /tmp/tmp-orgtest
TMPDIR=/tmp/tmp-orgtest emacs -batch -Q -L lisp/ -L testing/ --eval '(defconst org-release "7.8.09-Test")' -l testing/org-test.el --eval '(require '"'"'ob-awk)' --eval '(require '"'"'ob-C)' --eval '(require '"'"'ob-fortran)' --eval '(require '"'"'ob-maxima)' --eval '(require '"'"'ob-lilypond)' --eval '(require '"'"'ob-octave)' --eval '(require '"'"'ob-python)' --eval '(require '"'"'ob-sh)' --eval '(setq org-confirm-babel-evaluate nil)' -f org-test-run-batch-tests
Cannot open load file: ert
make[1]: *** [check] Fehler 255
make[1]: Leaving directory `/home/steuer/GIT/org-mode'
make: *** [update] Fehler 2
Thx for looking into this!
Detlef
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: make update fails
2012-04-23 12:17 make update fails Detlef Steuer
@ 2012-04-23 12:25 ` Rainer M Krug
2012-04-23 12:35 ` Rainer M Krug
2012-04-23 16:25 ` Achim Gratz
1 sibling, 1 reply; 11+ messages in thread
From: Rainer M Krug @ 2012-04-23 12:25 UTC (permalink / raw)
To: Detlef Steuer; +Cc: emacs-orgmode
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 23/04/12 14:17, Detlef Steuer wrote:
> Did a fresh pull
>
> git clone git://orgmode.org/org-mode.git
>
> after
>
> make update
>
> failed with some errors.
>
> Did an make update
>
> immediately after pulling and ended there:
>
> mkdir -p /tmp/tmp-orgtest TMPDIR=/tmp/tmp-orgtest emacs -batch -Q -L lisp/ -L testing/ --eval
> '(defconst org-release "7.8.09-Test")' -l testing/org-test.el --eval '(require '"'"'ob-awk)'
> --eval '(require '"'"'ob-C)' --eval '(require '"'"'ob-fortran)' --eval '(require
> '"'"'ob-maxima)' --eval '(require '"'"'ob-lilypond)' --eval '(require '"'"'ob-octave)' --eval
> '(require '"'"'ob-python)' --eval '(require '"'"'ob-sh)' --eval '(setq
> org-confirm-babel-evaluate nil)' -f org-test-run-batch-tests Cannot open load file: ert
> make[1]: *** [check] Fehler 255 make[1]: Leaving directory `/home/steuer/GIT/org-mode' make:
> *** [update] Fehler 2
Can confirm this.
In addition: emacs doesn't load emacs.org file anymore:
Debugger entered--Lisp error: (void-function org-babel-load-file)
(org-babel-load-file "~/.emacs.d/emacs.org")
eval-buffer(#<buffer *load*> nil "/home/rkrug/.emacs.d/init.el" nil t) ; Reading at buffer
position 625
load-with-code-conversion("/home/rkrug/.emacs.d/init.el" "/home/rkrug/.emacs.d/init.el" t t)
load("/home/rkrug/.emacs.d/init" t t)
#[nil "\b\205\264
Cheers,
Rainer
>
> Thx for looking into this!
>
> Detlef
>
>
- --
Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology, UCT), Dipl. Phys.
(Germany)
Centre of Excellence for Invasion Biology
Stellenbosch University
South Africa
Tel : +33 - (0)9 53 10 27 44
Cell: +33 - (0)6 85 62 59 98
Fax : +33 - (0)9 58 10 27 44
Fax (D): +49 - (0)3 21 21 25 22 44
email: Rainer@krugs.de
Skype: RMkrug
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk+VSlUACgkQoYgNqgF2egrgCQCfXlppwTH/77vLc36+K9lN3sse
kscAnjAc6PAeiPjaFJvcnEeZ2nrPpb7Q
=bNgO
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: make update fails
2012-04-23 12:25 ` Rainer M Krug
@ 2012-04-23 12:35 ` Rainer M Krug
0 siblings, 0 replies; 11+ messages in thread
From: Rainer M Krug @ 2012-04-23 12:35 UTC (permalink / raw)
To: R.M.Krug; +Cc: Detlef Steuer, emacs-orgmode
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 23/04/12 14:25, Rainer M Krug wrote:
> On 23/04/12 14:17, Detlef Steuer wrote:
>> Did a fresh pull
>
>> git clone git://orgmode.org/org-mode.git
>
>> after
>
>> make update
>
>> failed with some errors.
>
>> Did an make update
>
>> immediately after pulling and ended there:
>
>> mkdir -p /tmp/tmp-orgtest TMPDIR=/tmp/tmp-orgtest emacs -batch -Q -L lisp/ -L testing/
>> --eval '(defconst org-release "7.8.09-Test")' -l testing/org-test.el --eval '(require
>> '"'"'ob-awk)' --eval '(require '"'"'ob-C)' --eval '(require '"'"'ob-fortran)' --eval
>> '(require '"'"'ob-maxima)' --eval '(require '"'"'ob-lilypond)' --eval '(require
>> '"'"'ob-octave)' --eval '(require '"'"'ob-python)' --eval '(require '"'"'ob-sh)' --eval
>> '(setq org-confirm-babel-evaluate nil)' -f org-test-run-batch-tests Cannot open load file:
>> ert make[1]: *** [check] Fehler 255 make[1]: Leaving directory `/home/steuer/GIT/org-mode'
>> make: *** [update] Fehler 2
>
>
> Can confirm this.
Org version: 7.8.09 (release_7.8.09-373-gd592b0)
>
> In addition: emacs doesn't load emacs.org file anymore:
>
>
> Debugger entered--Lisp error: (void-function org-babel-load-file) (org-babel-load-file
> "~/.emacs.d/emacs.org") eval-buffer(#<buffer *load*> nil "/home/rkrug/.emacs.d/init.el" nil t)
> ; Reading at buffer position 625 load-with-code-conversion("/home/rkrug/.emacs.d/init.el"
> "/home/rkrug/.emacs.d/init.el" t t) load("/home/rkrug/.emacs.d/init" t t) #[nil "\b\205\264
>
>
> Cheers,
>
> Rainer
>
>
>> Thx for looking into this!
>
>
>
>> Detlef
>
>
>
>
- --
Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology, UCT), Dipl. Phys.
(Germany)
Centre of Excellence for Invasion Biology
Stellenbosch University
South Africa
Tel : +33 - (0)9 53 10 27 44
Cell: +33 - (0)6 85 62 59 98
Fax : +33 - (0)9 58 10 27 44
Fax (D): +49 - (0)3 21 21 25 22 44
email: Rainer@krugs.de
Skype: RMkrug
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk+VTHgACgkQoYgNqgF2egqoOgCeNPMyjvRbeW+gtJelkK3KtcRn
Hs0Ani6ehiEyE0HOIt42TH0DPBpIs50b
=/w0y
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: make update fails
2012-04-23 12:17 make update fails Detlef Steuer
2012-04-23 12:25 ` Rainer M Krug
@ 2012-04-23 16:25 ` Achim Gratz
2012-04-23 16:31 ` Bastien
1 sibling, 1 reply; 11+ messages in thread
From: Achim Gratz @ 2012-04-23 16:25 UTC (permalink / raw)
To: emacs-orgmode
Detlef Steuer writes:
> Cannot open load file: ert
It fails at testing because you do not have ert installed. If you want
testing (recommended if you pull from master since it will avoid
installation of the occasional build that fails the test suite), install
ert or better yet switch to Emacs24 which has it built-in already.
I'll make "update" a compatibility target that doesn't run "check"
(similarly a new "update2" which does installation but no test) and let
a new target "up1" do that (and "up0" does just the update from git).
Regards,
Achim.
--
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+
Wavetables for the Waldorf Blofeld:
http://Synth.Stromeko.net/Downloads.html#BlofeldUserWavetables
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: make update fails
2012-04-23 16:25 ` Achim Gratz
@ 2012-04-23 16:31 ` Bastien
2012-04-23 16:38 ` Achim Gratz
0 siblings, 1 reply; 11+ messages in thread
From: Bastien @ 2012-04-23 16:31 UTC (permalink / raw)
To: Achim Gratz; +Cc: emacs-orgmode
Achim Gratz <Stromeko@nexgo.de> writes:
> Detlef Steuer writes:
>> Cannot open load file: ert
>
> It fails at testing because you do not have ert installed. If you want
> testing (recommended if you pull from master since it will avoid
> installation of the occasional build that fails the test suite), install
> ert or better yet switch to Emacs24 which has it built-in already.
>
> I'll make "update" a compatibility target that doesn't run "check"
> (similarly a new "update2" which does installation but no test) and let
> a new target "up1" do that (and "up0" does just the update from git).
Looks fine. Could you create a
make help+
directive that will display information about directives that
are not documented throught `make help'?
--
Bastien
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: make update fails
2012-04-23 16:31 ` Bastien
@ 2012-04-23 16:38 ` Achim Gratz
2012-04-23 19:37 ` Achim Gratz
0 siblings, 1 reply; 11+ messages in thread
From: Achim Gratz @ 2012-04-23 16:38 UTC (permalink / raw)
To: emacs-orgmode
Bastien writes:
> Looks fine. Could you create a
>
> make help+
The "+" is a reserved character in some shells, but I'll think of some
other name...
> directive that will display information about directives that
> are not documented through `make help'?
Will do.
Achim.
--
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+
SD adaptation for Waldorf microQ V2.22R2:
http://Synth.Stromeko.net/Downloads.html#WaldorfSDada
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: make update fails
2012-04-23 16:38 ` Achim Gratz
@ 2012-04-23 19:37 ` Achim Gratz
2012-04-23 19:53 ` Bastien
0 siblings, 1 reply; 11+ messages in thread
From: Achim Gratz @ 2012-04-23 19:37 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 512 bytes --]
Achim Gratz writes:
> Will do.
Here's that patch (and some more convenience targets). Also, the first
invocation of make will now create a local.mk configuration template if
it doesn't exist. You don't need to do anything if the defaults are
working for you, otherwise just edit whatever variable needs to be set
differently. Some more esoteric settings can be gleaned from
default.mk, this will probably be needed if you are on Windows and are
maybe missing some programs (some hints are in the comments).
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: additional targets and help --]
[-- Type: text/x-patch, Size: 8276 bytes --]
From 1276da42f887610bf4f91c54df0e7076728cbfcf Mon Sep 17 00:00:00 2001
From: Achim Gratz <Stromeko@Stromeko.DE>
Date: Mon, 23 Apr 2012 21:20:58 +0200
Subject: [PATCH] Introduce compatibility and convenience targets, local.mk
template, add "helpall"
* Makefile: new target "helpall" to document all targets, while "help"
continues to show a brief subset.
* default.mk: add cutlines for sed to produce local.mk with.
* targets.mk: add target "local.mk" to produce an (empty) local.mk
configuration template when it isn't already present. Ignore any
error when making this target since sed might not be present on all
systems. Redefine target "update" to not include testing, similarly
add target "update2" to additionally install without test. Add
targets "up0" to stop after git pull and "up1" to stop after test,
while "up2" continues to do everything and then installs. Complete
.PHONY target list. Add "refcard" target for compatibility with old
make. Clean contrib in "cleanall", too.
---
Makefile | 88 +++++++++++++++++++++++++++++++++++++++++++++---------------
default.mk | 4 +--
targets.mk | 35 ++++++++++++++++--------
3 files changed, 93 insertions(+), 34 deletions(-)
diff --git a/Makefile b/Makefile
index 7a77d42..1258d52 100644
--- a/Makefile
+++ b/Makefile
@@ -11,31 +11,77 @@ all::
# Describe valid make targets for org-mode.
.PHONY: targets help
-targets help:
+targets help helpall::
$(info )
- $(info make help - show this help)
- $(info make - cleanly compile Org ELisp files and documentation)
- $(info )
- $(info Installation)
+ $(info Getting Help)
$(info ============)
- $(info make install - install Org, both ELisp and Info files)
- $(info make install-lisp - install Org, only ELisp files)
- $(info make install-info - install Org, only Info file)
$(info )
- $(info Maintenance)
+ $(info make help - show brief help)
+ $(info make targets - dito)
+ $(info make helpall - show extended help)
+ $(info )
+ $(info Build and Check)
+ $(info ===============)
+ $(info make - build Org ELisp and all documentation)
+ $(info make all - dito)
+ $(info make compile - build Org ELisp files)
+ $(info make autoloads - create org-install.el to load org in-place)
+ $(info make check - build Org ELisp files and run test suite)
+helpall::
+ $(info make test - dito)
+ $(info make compile-dirty - build only stale Org ELisp files)
+ $(info make test-dirty - check without building first)
+ $(info )
+ $(info Compatibility)
+ $(info =============)
+ $(info make oldorg - what the old make did: compile autoloads info)
+ $(info )
+ $(info Convenience)
$(info ===========)
- $(info make doc - make all documentation)
- $(info make info - make Info documentation)
- $(info make html - make HTML documentation)
- $(info make pdf - make pdf documentation)
- $(info make card - make refcards documentation)
- $(info )
- $(info make check - build org and run complete test suite)
- $(info make clean - clean Org ELisp and documentation files)
- $(info make compile - cleanly compile Org ELisp files)
- $(info make compile-dirty - compile Org ELisp without cleaning)
- $(info )
- $(info make clean-install - remove installed Org ELisp and documentation files)
+ $(info make up0 - pull from upstream)
+ $(info make up1 - pull from upstream, build and check)
+ $(info make up2 - pull from upstream, build, check and install)
+ $(info make update - pull from upstream and build)
+ $(info make update2 - pull from upstream, build and install)
+ $(info make local.mk - create new local.mk as template for adaptation)
+ $(info )
+ $(info Cleaning)
+ $(info ========)
+ $(info make clean - remove built Org ELisp files and documentation)
+ $(info make cleanall - remove everything that can be built and all remnants)
+ $(info make cleandirs - clean in etc/, lisp/ and doc/)
+ $(info make cleancontrib - remove remnants in contrib/)
+ $(info make cleandoc - remove built documentation)
+ $(info make cleandocs - dito)
+ $(info make cleanlisp - remove built Org ELisp files)
+ $(info make cleanelc - dito)
+ $(info make cleanrel - remove release remnants)
+ $(info make cleantest - remove check remnants)
+ $(info make clean-install - remove previous Org installation)
+ $(info )
+ $(info Documentation)
+ $(info =============)
+targets help helpall::
+ $(info make doc - build all documentation)
+helpall::
+ $(info make docs - dito)
+targets help helpall::
+ $(info make info - build Info documentation)
+helpall::
+ $(info make html - build HTML documentation)
+ $(info make pdf - build PDF documentation)
+ $(info make card - build reference cards)
+ $(info make refcard - dito)
+targets help helpall::
+ $(info )
+ $(info Installation)
+ $(info ============)
+ $(info make install - build and install Org)
+helpall::
+ $(info make install-etc - build and install files in /etc)
+ $(info make install-lisp - build and install Org Elisp files)
+ $(info make install-info - build and install Info documentation)
+targets help helpall::
@echo ""
include targets.mk # toplevel make machinery
diff --git a/default.mk b/default.mk
index ea56d72..72a3e5f 100644
--- a/default.mk
+++ b/default.mk
@@ -2,7 +2,7 @@
## NEVER EDIT THIS FILE, PUT ANY ADAPTATIONS INTO local.mk
##----------------------------------------------------------------------
## CHECK AND ADAPT THE FOLLOWING DEFINITIONS
-##----------------------------------------------------------------------
+##-8<-------------------------------------------------------------------
# Override default target if desired or define your own default target
# oldorg: # have plain "make" do the same things the old Makefile did
@@ -38,7 +38,7 @@ BTEST_OB_LANGUAGES = awk C fortran maxima lilypond octave python sh # R
# R is not activated by default because it requires ess to be installed and configured
BTEST_EXTRA = # extra packages to require for testing
-##----------------------------------------------------------------------
+##->8-------------------------------------------------------------------
## YOU MAY NEED TO ADAPT THESE DEFINITIONS
##----------------------------------------------------------------------
diff --git a/targets.mk b/targets.mk
index a341301..e208ad7 100644
--- a/targets.mk
+++ b/targets.mk
@@ -21,13 +21,26 @@ ifneq ($(GITSTATUS),)
GITVERSION := $(GITVERSION).dirty
endif
-.PHONY: default all oldorg up2 update compile lisp doc etc \
+.PHONY: all oldorg update update2 up0 up1 up2 compile $(SUBDIRS) \
check test install info html pdf card doc docs $(INSTSUB) \
autoloads cleanall clean cleancontrib cleanrel clean-install \
- cleanelc cleandirs cleanlisp cleandoc cleandocs cleantest
-
-# backwards compatibility target
-oldorg: compile autoloads info
+ cleanelc cleandirs cleanlisp cleandoc cleandocs cleantest \
+ compile compile-dirty
+
+oldorg: compile autoloads info # what the old makefile did when no target was specified
+refcard: card
+update update2:: up0 all
+
+.PRECIOUS: local.mk
+local.mk:
+ $(info ==========================================)
+ $(info Created a local.mk template.)
+ $(info Please adapt local.mk to your local setup!)
+ $(info ==========================================)
+ -@$(SED) -n \
+ -e '/-8<-/,/->8-/ {s/^\(\s*[^#]\)/#\1/;p}' \
+ -e '$$ i ## See default.mk for further configuration options.' \
+ default.mk > $@
all \
compile:: lisp
@@ -51,13 +64,13 @@ ifeq ($(TEST_NO_AUTOCLEAN),) # define this variable to leave $(testdir) around f
$(MAKE) cleantest
endif
-up2: update
- $(SUDO) $(MAKE) install
-
-update:
+up0 up1 up2::
git remote update
git pull
- $(MAKE) check
+up1 up2:: all
+ $(MAKE) test-dirty
+up2 update2::
+ $(SUDO) $(MAKE) install
install: $(INSTSUB)
@@ -81,7 +94,7 @@ clean: cleanrel
$(MAKE) -C lisp clean
$(MAKE) -C doc clean
-cleanall: cleandirs cleantest
+cleanall: cleandirs cleantest cleancontrib
-$(FIND) . -name \*~ -exec $(RM) {} \;
cleancontrib:
--
1.7.9.2
[-- Attachment #3: Type: text/plain, Size: 187 bytes --]
Regards,
Achim.
--
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+
Wavetables for the Terratec KOMPLEXER:
http://Synth.Stromeko.net/Downloads.html#KomplexerWaves
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: make update fails
2012-04-23 19:37 ` Achim Gratz
@ 2012-04-23 19:53 ` Bastien
0 siblings, 0 replies; 11+ messages in thread
From: Bastien @ 2012-04-23 19:53 UTC (permalink / raw)
To: Achim Gratz; +Cc: emacs-orgmode
Achim Gratz <Stromeko@nexgo.de> writes:
> Achim Gratz writes:
>> Will do.
>
> Here's that patch (and some more convenience targets). Also, the first
> invocation of make will now create a local.mk configuration template if
> it doesn't exist. You don't need to do anything if the defaults are
> working for you, otherwise just edit whatever variable needs to be set
> differently. Some more esoteric settings can be gleaned from
> default.mk, this will probably be needed if you are on Windows and are
> maybe missing some programs (some hints are in the comments).
Applied, thanks!
--
Bastien
^ permalink raw reply [flat|nested] 11+ messages in thread
* make update fails
@ 2012-11-10 19:03 Thomas S. Dye
2012-11-11 3:01 ` Nick Dokos
0 siblings, 1 reply; 11+ messages in thread
From: Thomas S. Dye @ 2012-11-10 19:03 UTC (permalink / raw)
To: Org-mode
Aloha all,
I get this error message:
mk/targets.mk:75: *** target file `update' has both : and :: entries. Stop.
I suspect I've done something wrong and will appreciate suggestions how
to get back on track.
All the best,
Tom
--
T.S. Dye & Colleagues, Archaeologists
735 Bishop St, Suite 315, Honolulu, HI 96813
Tel: 808-529-0866, Fax: 808-529-0884
http://www.tsdye.com
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: make update fails
2012-11-10 19:03 Thomas S. Dye
@ 2012-11-11 3:01 ` Nick Dokos
2012-11-11 3:16 ` Thomas S. Dye
0 siblings, 1 reply; 11+ messages in thread
From: Nick Dokos @ 2012-11-11 3:01 UTC (permalink / raw)
To: Thomas S. Dye; +Cc: Org-mode
Thomas S. Dye <tsd@tsdye.com> wrote:
> Aloha all,
>
> I get this error message:
>
> mk/targets.mk:75: *** target file `update' has both : and :: entries. Stop.
>
> I suspect I've done something wrong and will appreciate suggestions how
> to get back on track.
>
Probably added something to your local.mk that looks like this:
update:
....
mk/targets.mk has this however:
update update2:: up0 all
The single vs double colons cause the problem: see
(info "(make) Multiple Rules")
(info "(make) Double-Colon")
for the details.
Nick
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: make update fails
2012-11-11 3:01 ` Nick Dokos
@ 2012-11-11 3:16 ` Thomas S. Dye
0 siblings, 0 replies; 11+ messages in thread
From: Thomas S. Dye @ 2012-11-11 3:16 UTC (permalink / raw)
To: nicholas.dokos; +Cc: Org-mode
Nick Dokos <nicholas.dokos@hp.com> writes:
> Thomas S. Dye <tsd@tsdye.com> wrote:
>
>> Aloha all,
>>
>> I get this error message:
>>
>> mk/targets.mk:75: *** target file `update' has both : and :: entries. Stop.
>>
>> I suspect I've done something wrong and will appreciate suggestions how
>> to get back on track.
>>
>
> Probably added something to your local.mk that looks like this:
>
> update:
> ....
>
> mk/targets.mk has this however:
>
> update update2:: up0 all
>
> The single vs double colons cause the problem: see
>
> (info "(make) Multiple Rules")
> (info "(make) Double-Colon")
>
> for the details.
>
> Nick
Yes, update:: seems to work.
Thanks,
Tom
--
Thomas S. Dye
http://www.tsdye.com
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2012-11-11 3:16 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-04-23 12:17 make update fails Detlef Steuer
2012-04-23 12:25 ` Rainer M Krug
2012-04-23 12:35 ` Rainer M Krug
2012-04-23 16:25 ` Achim Gratz
2012-04-23 16:31 ` Bastien
2012-04-23 16:38 ` Achim Gratz
2012-04-23 19:37 ` Achim Gratz
2012-04-23 19:53 ` Bastien
-- strict thread matches above, loose matches on Subject: below --
2012-11-10 19:03 Thomas S. Dye
2012-11-11 3:01 ` Nick Dokos
2012-11-11 3:16 ` Thomas S. Dye
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.