indentation

indentation

[Yen Tran]

Hi,
How do I leave indentation mode unchanged?   For example, if current *.c or
*.cpp file is using 5 spaces as indentation, then use 5 spaces; if it's
using 4-space tab, then use tab.

By default, everything I edit with emacs adds tab to file.

Version I am using is GNU Emacs 21.2.1.
Thanks,
--yen

Re: indentation

[Gareth Rees]

Yen Tran wrote:
> How do I leave indentation mode unchanged?  For example, if current
> *.c or *.cpp file is using 5 spaces as indentation, then use 5 spaces;
> if it's using 4-space tab, then use tab.
> 
> By default, everything I edit with Emacs adds tab to file.

Emacs indentation behaviour in C mode is under the control of these
variables:

* 'indent-tabs-mode'
   Indentation can insert tabs if this is non-nil.
* 'tab-width'
  Distance between tab stops (for display of tab characters), in columns.
* 'c-basic-offset'
  Amount of basic offset used by + and - symbols in 'c-offsets-alist'.

The best thing to do is to agree with all your colleagues to use spaces
for indentation (hence indent-tabs-mode should be nil) and how many of
them.  Then you and they can set editor settings accordingly.

The next best thing to do is to specify behaviour for different files by
putting a local variables section into the file (see the Info node
(emacs)File Variables).  For example, a file using indentation of 5
spaces should have the following somewhere near the end:

    /* Local Variables: */
    /* indent-tabs-mode: nil */
    /* c-basic-offset: 5 */
    /* End: */

while a file using tab characters for indent which you want to display
with tab stops every 4 characters should have the following:

    /* Local Variables: */
    /* indent-tabs-mode: t */
    /* tab-width: 4 */
    /* c-basic-offset: 4 */
    /* End: */

If this is no good either, then you could write something that guesses
the settings for the file, and put that in c-mode-hook.  For example,
you might do something like this:

    (defun guess-indent-settings ()
      (save-excursion
        (goto-char (point-min))
        ;; Don't guess if local variables already set.
        (when (and (not (search-forward "Local Variables:" nil t))
                   (re-search-forward "\\([\t ]*\\).*{\n\\1\\(\t\\| +\\)"
                                      nil t))
          (make-local-variable 'c-basic-offset)
          (if (string= (match-string 2) "\t")
              (setq indent-tabs-mode t
                    tab-width 4         ; See note below
                    c-basic-offset 4)   ; Ditto
            (setq indent-tabs-mode nil
                  c-basic-offset (length (match-string 2)))))))

    (add-hook 'c-mode-hook 'guess-indent-settings)

Note that when code uses tab characters for indenting, there's no way to
automatically guess by reading the file how many columns are needed per
tab stop.  A good reason not to use that indentation style!

As a last resort, I suppose you could look at the filename and apply
some rules based on what you know about the different projects you work
on, perhaps like this:

    (setq indent-tabs-mode nil
          c-basic-offset
          (let ((f (buffer-file-name)))
            (cond ((string-match "/projects/foo/" f) 5)
                  ((string-match "/projects/bar/" f) 8)
                  (t 4))))

-- 
Gareth Rees   http://www.garethrees.org/

Indentation

[Ronny Mandal]

Hi.

Does anyone know how I get rid of the annoying indentation after e.g. 
if-statements (in multiple languages), i.e. (C-example):

if(condition)
    {	/*Why?!*/
    }


Thanks.

-RM

Re: Indentation

[Colin S. Miller]

Ronny Mandal wrote:
> Hi.
> 
> Does anyone know how I get rid of the annoying indentation after e.g. 
> if-statements (in multiple languages), i.e. (C-example):
> 
> if(condition)
>    {    /*Why?!*/
>    }
> 
> 
> Thanks.
> 
> -RM
That's the default indent style, its used for all GNU project code.

(c-add-style "myStyle" '("bsd"
			(c-basic-offset . 4)))

(add-hook 'c-mode-common-hook '(lambda ()
                                  (c-set-style "myStyle")))


should change it to a more-normal style.

NB,
This code is for XEmacs, it should work on GNU Emacs, but I haven't tested it.


-- 
Replace the obvious in my email address with the first three letters of the hostname to reply.

Indentation.

[zombek]

Hi.
I'm new to emacs and I'd like to set 2 things:
1) 4 space indentation (no mather which language) and it shouldn't care
about the syntax - when I say indent then indent
2)when I press RETURN when beeing on some indentation level i should
automatically go to the same indentation level in the new line without
the need to press TAB

Szymon

Indentation.

[zombek]

Hi.
I'm new to emacs and I'd like to set 2 things:
1) 4 space indentation (no mather which language) and it shouldn't care
about the syntax - when I say indent then indent
2)when I press RETURN when beeing on some indentation level i should
automatically go to the same indentation level in the new line without
the need to press TAB

Szymon

Re: Indentation.

[Markus Triska]

zombek@gmail.com writes:

> 1) 4 space indentation (no mather which language) and it shouldn't care
> about the syntax - when I say indent then indent

Add this to the modes in which you want 4 spaces when you press TAB:

(local-set-key "\t" (lambda () (interactive) (insert "    ")))

> 2)when I press RETURN when beeing on some indentation level i should
> automatically go to the same indentation level in the new line without
> the need to press TAB

(global-set-key "\C-m" 'newline-and-indent)


Best wishes! -- Markus Triska

Re: Indentation.

[Sam Peterson]

>>>>> "zombek" == zombek  <zombek@gmail.com> writes:

    > Hi.  I'm new to emacs and I'd like to set 2 things: 1) 4 space
    > indentation (no mather which language) and it shouldn't care
    > about the syntax - when I say indent then indent 2)when I press
    > RETURN when beeing on some indentation level i should
    > automatically go to the same indentation level in the new line
    > without the need to press TAB

(setq-default indent-tabs-mode nil)
(global-set-key "\C-m" 'newline-and-indent)
(global-set-key "\C-m" 'newline)

For cc-mode and modes derivative of cc-mode, the following will set
indentation to 4 spaces:

(setq c-basic-offset 4)

For the same modes, this will turn off syntactic indentation (electric
parens and braces).

(setq c-syntactic-indentation nil)

For other languages I'm not sure.  I always saw syntactic indentation
as a useful feature.  If you absolutely want TAB to indent 4-spaces
regardless, try this:

(fset 'four-space-indent "\C-u ")
(add-hook 'c-mode-hook
    (lambda () (local-set-key [tab] 'four-space-indent)))

Use other hooks for other language modes.

HTH.

-- 
Sam Peterson
skpeterson At nospam ucdavis.edu
"if programmers were paid to remove code instead of adding it,
software would be much better" -- unknown

Re: Indentation.

[Malte Spiess]

Markus Triska <triska@gmx.at> writes:

> zombek@gmail.com writes:
>
>> 1) 4 space indentation (no mather which language) and it shouldn't care
>> about the syntax - when I say indent then indent
>
> Add this to the modes in which you want 4 spaces when you press TAB:
>
> (local-set-key "\t" (lambda () (interactive) (insert "    ")))

I have to say that I don't think that this is a very good idea since
every other function that has to do with indentation will ruin your
setup. (indent-region,...)

You should stick to what Sam has recommended and maybe think your intend
over.

I guess that there are some modes in which an indentation of 4 is really
not a good idea, like LaTeX mode or html stuff (ymmv). Plus I don't
think that this is a easy to accomplish feature. I would recommend a
more precise setup for each mode. The modes for c-like-languages can be
changed all in one step.

>> 2)when I press RETURN when beeing on some indentation level i should
>> automatically go to the same indentation level in the new line without
>> the need to press TAB
>
> (global-set-key "\C-m" 'newline-and-indent)

This can be a good idea anyway. But keep in mind that C-j already does this.

Greetings

Malte

Re: Indentation.

[Sam Peterson]

>>>>> "Sam" == Sam Peterson <skpeterson@nospam.please.ucdavis.edu> writes:

    > (global-set-key "\C-m" 'newline-and-indent)
    > (global-set-key "\C-m" 'newline)

Woops!  That second line should be:

(global-set-key "\C-j" 'newline)

There.

-- 
Sam Peterson
skpeterson At nospam ucdavis.edu
"if programmers were paid to remove code instead of adding it,
software would be much better" -- unknown

Re: Indentation.

[jmg3000]

Sam Peterson wrote:
> >>>>> "Sam" == Sam Peterson <skpeterson@nospam.please.ucdavis.edu> writes:
>
>     > (global-set-key "\C-m" 'newline-and-indent)
>     > (global-set-key "\C-m" 'newline)
>
> Woops!  That second line should be:
>
> (global-set-key "\C-j" 'newline)
>
> There.

I've also seen that written

(global-set-key "\r" 'newline-and-indent)

and that seems to work also. So, Sam, that plus

(setq-default indent-tabs-mode nil)
(setq-default tab-width 4)

should be just what you want.

---John

Re: Indentation.

[jmg3000]

jmg3...@gmail.com wrote:
> [snip]
> So, Sam, [snip ]
> should be just what you want.

Whoops. s/Sam/Szymon/.

Re: Indentation.

[don provan]

jmg3000@gmail.com writes:

> (setq-default tab-width 4)
>
> should be just what you want.

Whoa! The original question quite correctly asked for four *space*
indentation. Changing the tab width to some non-standard value is
irrelevant, just typical confusion between the tab character in the
file (which, if other than 8 characters, can conflict with other
utilities) and the indent command that moves lines according to a
visual intentation scheme that has nothing at all to do with the tab
setting.

Also, there's no reason to suggest setting this value *globally*.
Let's just teach him to set it in the buffers he wants this special
indentation in: maybe as he gets used to normal "smart" indentation in
other modes, he'll loosen up about how he thinks indentation should
work.

-don

Re: Indentation.

[jmg3000]

don provan wrote:
> jmg3000@gmail.com writes:
>
> > (setq-default tab-width 4)
> >
> > should be just what you want.
>
> Whoa! [snip good info]

Thanks for the clarifications Don! :)

---John

Re: Indentation.

[Markus Triska]

Malte Spiess <i1tnews@arcor.de> writes:

> keep in mind that C-j already does this.

Not in all modes, notably Lisp interaction mode.

Best wishes! -- Markus Triska

indentation

[ptlo]

Hello,

with never version of emacs (I have GNU Emacs 25.3.1 (x86_64-suse-linux-gnu, GTK+ Version 3.22.30)) I'm constantly annoyed by too aggressive automatic indentation when editing. Basically when I press enter, the cursor on the new line is automatically moved to the column of first character of the preceding line. This is in the Fundamental mode.

It gets even worse e.g. in the F90 mode. It e.g. moves a comment (starting with !) on preceding line to the column of first character of the next (really!) line when I add new line inside a code. This is crazy, why I couldn't have comment starting at column 1? The emacs simply can't know what I'm going to do on new empty line!!

In older emacs versions, when I presses enter, the cursor simply stayed at column 1 on new line. If I wanted a formatting, I pressed tab key. Please, please, how to return to this older setting? I went through all customizations containing indent, but nothing works.

Thank you!

Petr

Re: indentation

[Philip Kaludercic]

<ptlo@centrum.cz> writes:

> Hello,
>
> with never version of emacs (I have GNU Emacs 25.3.1
> (x86_64-suse-linux-gnu, GTK+ Version 3.22.30)) I'm constantly annoyed
> by too aggressive automatic indentation when editing. Basically when I
> press enter, the cursor on the new line is automatically moved to the
> column of first character of the preceding line. This is in the
> Fundamental mode.
>
> It gets even worse e.g. in the F90 mode. It e.g. moves a comment
> (starting with !) on preceding line to the column of first character
> of the next (really!) line when I add new line inside a code. This is
> crazy, why I couldn't have comment starting at column 1? The emacs
> simply can't know what I'm going to do on new empty line!!
>
> In older emacs versions, when I presses enter, the cursor simply
> stayed at column 1 on new line. If I wanted a formatting, I pressed
> tab key. Please, please, how to return to this older setting? I went
> through all customizations containing indent, but nothing works.
>
> Thank you!
>
> Petr

Shouldn't this be disabled by deactivating electric-indent-mode?

-- 
	Philip K.

Re: indentation

[Gregory Heytings]

>
> with ne[w]er version of emacs (I have GNU Emacs 25.3.1 
> (x86_64-suse-linux-gnu, GTK+ Version 3.22.30))
>

Note that Emacs 25.2 is not a "new" version of Emacs, the current stable 
version is 27.2.

>
> I'm constantly annoyed by too aggressive automatic indentation when 
> editing. Basically when I press enter, the cursor on the new line is 
> automatically moved to the column of first character of the preceding 
> line. This is in the Fundamental mode.
>

Yes, the default meaning of RET has changed in Emacs 24.4: 
electric-indent-mode is enabled by default, which means that RET reindents 
the current line and indents the next line.  You can disable this by 
adding (electric-indent-mode -1) to your init file.

Re: indentation

[Joost Kremers]

On Tue, Apr 27 2021, Gregory Heytings wrote:
>> I'm constantly annoyed by too aggressive automatic indentation when editing.
>> Basically when I press enter, the cursor on the new line is automatically
>> moved to the column of first character of the preceding line. This is in the
>> Fundamental mode.
>>
>
> Yes, the default meaning of RET has changed in Emacs 24.4: electric-indent-mode
> is enabled by default, which means that RET reindents the current line and
> indents the next line.  You can disable this by adding (electric-indent-mode -1)
> to your init file.

Note that each new version of Emacs comes with a News file that describes all
the changes made in that version, esp. user-visible changes. There's usually
also information on how to get back the old behaviour (unless it's something
obvious, like disabling a minor mode, as is the case with indentation here).

So whenever you upgrade Emacs, it's always a good idea to check the News file,
which can be done easily in Emacs itself with `C-h n`. Keep in mind, though,
that if you skip a major version, the News file only contains changes for the
current major version, so anything that was changed in the version you skipped
won't be there. In that case, googling for "Emacs XX news" with XX being the
major version should get you the relevant News file.

I just thought I'd mention this because the change you encountered was made in
Emacs 24, while you say you upgraded to Emacs 25 (note, though, that Emacs 25.3
is already three and a half years old), so you wouldn't have found this change
by looking through the News file.

HTH

-- 
Joost Kremers
Life has its moments

Re: indentation

[ptlo]

Philip,

this is it! I disabled the electric-indent-mode and emacs is again sane. I didn't find this option before, looking in the customization groups from the menu.

Many thanks!

Petr

Re: indentation

[Colin Baxter]

>>>>>   <ptlo@centrum.cz> writes:

    > Philip, this is it! I disabled the electric-indent-mode and emacs
    > is again sane. I didn't find this option before, looking in the
    > customization groups from the menu.

In F-90 I switch off electric-indent-mode via a .dir-locals.el, viz

#+begin_src elisp
((nil . ((f90-if-indent . 4)
         (f90-do-indent . 4)
         (f90-program-indent . 4)
         (f90-associate-indent . 4)
         (f90-critical-indent . 4)
         (f90-type-indent . 4)
         (eval add-hook 'f90-mode-hook
               (lambda () (electric-indent-local-mode -1))))))
#+end_src 


Best wishes,

Re: indentation

[Stefan Monnier]

> which can be done easily in Emacs itself with `C-h n`. Keep in mind, though,
> that if you skip a major version, the News file only contains changes for the
> current major version, so anything that was changed in the version you skipped
> won't be there. In that case, googling for "Emacs XX news" with XX being the
> major version should get you the relevant News file.

The news for the current version is in the file `.../etc/NEWS`, which is
what `C-h n` shows you.  For older releases, you don't need to resort to
the internet: they're right there in `etc/NEWS.NN`.
I guess we could/should add a hyperlink at the end of `etc/NEWS` to the
previous files.  You might want to suggest this improvement via `M-x
report-emacs-bug`.


        Stefan

Re: indentation

[Stefan Monnier]

> It gets even worse e.g. in the F90 mode. It e.g. moves a comment (starting
> with !) on preceding line to the column of first character of the next
> (really!) line when I add new line inside a code. This is crazy, why
> I couldn't have comment starting at column 1? The emacs simply can't know
> what I'm going to do on new empty line!!

I'm not completely sure I understand the scenario you're describing
(and I'm not very familiar with F90's syntax either, my use of Fortran
dates back to the nineties but using F77), but it sounds like it might
simply be a bug.


        Stefan

Re: indentation

[ptlo]

I have a comment starting with ! in column  1, and a F90 code on next line starting around column 7. When I hit enter inside the comment, the rest of the comment is now on new line and aligned according to the *next* line (the F90 code). Moreover the start of the comment, instead of left alone -- is equally aligned too, i.e. the ! moved to around col. 7.  This all happens even when above the comment was another comment starting e.g. in col. 1, not another F90 code, meaning that the indentation is governed by what follows not precedes. Crazines squared, isn't it?

Cheers

Petr

______________________________________________________________
> Od: "Stefan Monnier" <monnier@iro.umontreal.ca>
> Komu: help-gnu-emacs@gnu.org
> Datum: 27.04.2021 19:12
> Předmět: Re: indentation
>
>> It gets even worse e.g. in the F90 mode. It e.g. moves a comment (starting
>> with !) on preceding line to the column of first character of the next
>> (really!) line when I add new line inside a code. This is crazy, why
>> I couldn't have comment starting at column 1? The emacs simply can't know
>> what I'm going to do on new empty line!!
>
>I'm not completely sure I understand the scenario you're describing
>(and I'm not very familiar with F90's syntax either, my use of Fortran
>dates back to the nineties but using F77), but it sounds like it might
>simply be a bug.
>
>
>        Stefan
>
>
>
>

Re: indentation

[Thibaut Verron]

On 4/27/21 6:06 PM, Colin Baxter wrote:
>>>>>>    <ptlo@centrum.cz> writes:
>      > Philip, this is it! I disabled the electric-indent-mode and emacs
>      > is again sane. I didn't find this option before, looking in the
>      > customization groups from the menu.
>
> In F-90 I switch off electric-indent-mode via a .dir-locals.el, viz
>
> #+begin_src elisp
> ((nil . ((f90-if-indent . 4)
>           (f90-do-indent . 4)
>           (f90-program-indent . 4)
>           (f90-associate-indent . 4)
>           (f90-critical-indent . 4)
>           (f90-type-indent . 4)
>           (eval add-hook 'f90-mode-hook
>                 (lambda () (electric-indent-local-mode -1))))))
> #+end_src

Do you use a .dir-locals because you sometimes want to use 
electric-indent-mode in fortran?

If yes, I don't think this will do what you want, as the eval form will 
modify the global value of the hook.

However, if all you want is to never have electric-indent-mode in 
fortran, you can just have the add-hook form in your .emacs.

Re: indentation

[Colin Baxter]

Hi Thibaut,

>>>>> Thibaut Verron <thibaut.verron@gmail.com> writes:

    > On 4/27/21 6:06 PM, Colin Baxter wrote:
    >>>>>>> <ptlo@centrum.cz> writes:
    >> > Philip, this is it! I disabled the electric-indent-mode and
    >> emacs > is again sane. I didn't find this option before, looking
    >> in the > customization groups from the menu.
    >> 
    >> In F-90 I switch off electric-indent-mode via a .dir-locals.el,
    >> viz
    >> 
    >> #+begin_src elisp ((nil . ((f90-if-indent . 4) (f90-do-indent
    >> . 4) (f90-program-indent . 4) (f90-associate-indent . 4)
    >> (f90-critical-indent . 4) (f90-type-indent . 4) (eval add-hook
    >> 'f90-mode-hook (lambda () (electric-indent-local-mode -1))))))
    >> #+end_src

    > Do you use a .dir-locals because you sometimes want to use
    > electric-indent-mode in fortran?

    > If yes, I don't think this will do what you want, as the eval form
    > will modify the global value of the hook.

    > However, if all you want is to never have electric-indent-mode in
    > fortran, you can just have the add-hook form in your .emacs.

The latter. I use a dir-local and do not put the hook in ~/.emacs for the
simple reason that I have other fortran (different versions) directories
where I want the electric-indent-mode.

Best wishes,

Re: indentation

[Thibaut Verron]

On 4/27/21 9:00 PM, Colin Baxter wrote:
> Hi Thibaut,
>
>>>>>> Thibaut Verron <thibaut.verron@gmail.com> writes:
>      > On 4/27/21 6:06 PM, Colin Baxter wrote:
>      >>>>>>> <ptlo@centrum.cz> writes:
>      >> > Philip, this is it! I disabled the electric-indent-mode and
>      >> emacs > is again sane. I didn't find this option before, looking
>      >> in the > customization groups from the menu.
>      >>
>      >> In F-90 I switch off electric-indent-mode via a .dir-locals.el,
>      >> viz
>      >>
>      >> #+begin_src elisp ((nil . ((f90-if-indent . 4) (f90-do-indent
>      >> . 4) (f90-program-indent . 4) (f90-associate-indent . 4)
>      >> (f90-critical-indent . 4) (f90-type-indent . 4) (eval add-hook
>      >> 'f90-mode-hook (lambda () (electric-indent-local-mode -1))))))
>      >> #+end_src
>
>      > Do you use a .dir-locals because you sometimes want to use
>      > electric-indent-mode in fortran?
>
>      > If yes, I don't think this will do what you want, as the eval form
>      > will modify the global value of the hook.
>
>      > However, if all you want is to never have electric-indent-mode in
>      > fortran, you can just have the add-hook form in your .emacs.
>
> The latter. I use a dir-local and do not put the hook in ~/.emacs for the
> simple reason that I have other fortran (different versions) directories
> where I want the electric-indent-mode.

Oh, I see. Then something like the following should work, without 
touching the hook for those other directories:

((f90-mode . ((f90-if-indent . 4)
               (f90-do-indent . 4)
               (f90-program-indent . 4)
               (f90-associate-indent . 4)
               (f90-critical-indent . 4)
               (f90-type-indent . 4)
               (eval . (electric-indent-local-mode -1))))

Best wishes,
Thibaut

Re: indentation

[Colin Baxter]

>>>>> Thibaut Verron <thibaut.verron@gmail.com> writes:

    > On 4/27/21 9:00 PM, Colin Baxter wrote:
    >> Hi Thibaut,
    >> 
    >>>>>>> Thibaut Verron <thibaut.verron@gmail.com> writes:
    >> > On 4/27/21 6:06 PM, Colin Baxter wrote:
    >> >>>>>>> <ptlo@centrum.cz> writes: >> > Philip, this is it! I
    >> disabled the electric-indent-mode and >> emacs > is again sane. I
    >> didn't find this option before, looking >> in the > customization
    >> groups from the menu.
    >> >>
    >> >> In F-90 I switch off electric-indent-mode via a
    >> .dir-locals.el, >> viz
    >> >>
    >> >> #+begin_src elisp ((nil . ((f90-if-indent . 4) (f90-do-indent
    >> >> . 4) (f90-program-indent . 4) (f90-associate-indent . 4) >>
    >> (f90-critical-indent . 4) (f90-type-indent . 4) (eval add-hook >>
    >> 'f90-mode-hook (lambda () (electric-indent-local-mode -1)))))) >>
    >> #+end_src
    >> 
    >> > Do you use a .dir-locals because you sometimes want to use >
    >> electric-indent-mode in fortran?
    >> 
    >> > If yes, I don't think this will do what you want, as the eval
    >> form > will modify the global value of the hook.
    >> 
    >> > However, if all you want is to never have electric-indent-mode
    >> in > fortran, you can just have the add-hook form in your .emacs.
    >> 
    >> The latter. I use a dir-local and do not put the hook in ~/.emacs
    >> for the simple reason that I have other fortran (different
    >> versions) directories where I want the electric-indent-mode.

    > Oh, I see. Then something like the following should work, without
    > touching the hook for those other directories:

    > ((f90-mode . ((f90-if-indent . 4) (f90-do-indent . 4)
    > (f90-program-indent . 4) (f90-associate-indent . 4)
    > (f90-critical-indent . 4) (f90-type-indent . 4) (eval
    > . (electric-indent-local-mode -1))))

    > Best wishes, Thibaut

Right - that's what I wrote except I don't need no f90-mode since there ain't
no non-fortran files in the directory.

Re: indentation

[Stefan Monnier]

> I have a comment starting with ! in column  1, and a F90 code on next line
> starting around column 7. When I hit enter inside the comment, the rest of
> the comment is now on new line and aligned according to the *next* line (the
> F90 code).

Without knowing more about the content of your code and comment (and
F90's syntax) I'm not sure if column 7 is the right choice for the
indentation of the new line, but it sounds reasonable.

> Moreover the start of the comment, instead of left alone -- is
> equally aligned too, i.e. the ! moved to around col. 7.

I expect the same happens if you just hit TAB instead of RET, right?

If so, the problem is not directly linked to the electric-indent-mode,
and is instead either a bug in f90-mode's indentation code or maybe it's
controlled by a config var in `f90-mode` (since it sounds to me that
comments in column 1 are an old F77 convention which you may or may not
want to follow in F90 code).

> This all happens even when above the comment was another comment
> starting e.g. in col. 1, not another F90 code, meaning that the
> indentation is governed by what follows not precedes.

It's probably neither: the indentation rules probably looks at preceding
*code* rather than preceding comments ;-)

> Crazines squared, isn't it?

There's always some twisted logic behind craziness.


        Stefan

Re: indentation

[Gregory Heytings]

>> which can be done easily in Emacs itself with `C-h n`. Keep in mind, 
>> though, that if you skip a major version, the News file only contains 
>> changes for the current major version, so anything that was changed in 
>> the version you skipped won't be there. In that case, googling for 
>> "Emacs XX news" with XX being the major version should get you the 
>> relevant News file.
>
> The news for the current version is in the file `.../etc/NEWS`, which is 
> what `C-h n` shows you.  For older releases, you don't need to resort to 
> the internet: they're right there in `etc/NEWS.NN`.
>

... and C-u NN C-h n opens the NEWS.NN file.

Re: indentation

[ptlo]

Yes, it may be a bug/ feature of the F90 mode. But it got annoying only when the electric mode was active, otherwise the formatting was controlable (e.g. by tab key) and not disturbing. Look, when programming, one is often quite concentrated and not keen on seeing lines skipping unexpectedly here and there.

Cheers

Petr

Re: indentation

[Joost Kremers]

On Wed, Apr 28 2021, ptlo@centrum.cz wrote:
> Yes, it may be a bug/ feature of the F90 mode. But it got annoying only when the
> electric mode was active, otherwise the formatting was controlable (e.g. by tab
> key) and not disturbing. Look, when programming, one is often quite concentrated
> and not keen on seeing lines skipping unexpectedly here and there.

The particular feature that the current line, i.e., the line on which one hits
RET, is re-indented, can be turned off by setting the variable
`electric-indent-inhibit` to `t`. (The name of this variable is somewhat
confusing, IMHO, because it suggests electric indent is inhibited altogether,
but in actual fact, as the doc string says, in inhibits *re*indentation).

With this feature turned off, which I find rather annoying myself,
electric-indent basically saves me from having to type TAB all the time. Even in
Python code, electric indent gets it right most of the time.

-- 
Joost Kremers
Life has its moments

Re: indentation

[Thibaut Verron]

On 4/27/21 10:02 PM, Colin Baxter wrote:
>>>>>> Thibaut Verron <thibaut.verron@gmail.com> writes:
>      > On 4/27/21 9:00 PM, Colin Baxter wrote:
>      >> Hi Thibaut,
>      >>
>      >>>>>>> Thibaut Verron <thibaut.verron@gmail.com> writes:
>      >> > On 4/27/21 6:06 PM, Colin Baxter wrote:
>      >> >>>>>>> <ptlo@centrum.cz> writes: >> > Philip, this is it! I
>      >> disabled the electric-indent-mode and >> emacs > is again sane. I
>      >> didn't find this option before, looking >> in the > customization
>      >> groups from the menu.
>      >> >>
>      >> >> In F-90 I switch off electric-indent-mode via a
>      >> .dir-locals.el, >> viz
>      >> >>
>      >> >> #+begin_src elisp ((nil . ((f90-if-indent . 4) (f90-do-indent
>      >> >> . 4) (f90-program-indent . 4) (f90-associate-indent . 4) >>
>      >> (f90-critical-indent . 4) (f90-type-indent . 4) (eval add-hook >>
>      >> 'f90-mode-hook (lambda () (electric-indent-local-mode -1)))))) >>
>      >> #+end_src
>      >>
>      >> > Do you use a .dir-locals because you sometimes want to use >
>      >> electric-indent-mode in fortran?
>      >>
>      >> > If yes, I don't think this will do what you want, as the eval
>      >> form > will modify the global value of the hook.
>      >>
>      >> > However, if all you want is to never have electric-indent-mode
>      >> in > fortran, you can just have the add-hook form in your .emacs.
>      >>
>      >> The latter. I use a dir-local and do not put the hook in ~/.emacs
>      >> for the simple reason that I have other fortran (different
>      >> versions) directories where I want the electric-indent-mode.
>
>      > Oh, I see. Then something like the following should work, without
>      > touching the hook for those other directories:
>
>      > ((f90-mode . ((f90-if-indent . 4) (f90-do-indent . 4)
>      > (f90-program-indent . 4) (f90-associate-indent . 4)
>      > (f90-critical-indent . 4) (f90-type-indent . 4) (eval
>      > . (electric-indent-local-mode -1))))
>
>      > Best wishes, Thibaut
>
> Right - that's what I wrote except I don't need no f90-mode since there ain't
> no non-fortran files in the directory.

Ok, then the f90-mode bit is not necessary (but it doesn't hurt either). 
But the important change is the last line, setting the mode without 
modifying the hook.

You can test it yourself: with what you wrote, open a file in the 
directory with the dir-locals, re-open it to make sure the hook is run 
(maybe not necessary if the variables are set for all modes), and indeed 
electric-indent-mode is off.

But if you open another f90 file in one of your other directories, 
electric-indent-mode will be off there too.

Best wishes,

Thibaut

Re: indentation

[Stefan Monnier]

> Yes, it may be a bug/ feature of the F90 mode. But it got annoying only when
> the electric mode was active, otherwise the formatting was controlable
> (e.g. by tab key) and not disturbing.

Indeed.  `electric-indent-mode` presumes that the indentation code
gets it right.  If that's not the case, then you're better off disabling
it (or, as Joost points out, just disabling the reindentation by setting
`electric-indent-inhibit`).

But that doesn't mean we shouldn't try to make the indentation "do the
right thing" ;-)


        Stefan

Re: indentation

[ptlo]

I admit I'm not a fan of gimmicks that are smarter than me... Now go for insert-programmer-infront-of-computer! Or for a start indent-programmer-looking-sideways? :-)

Cheers

Petr

Re: indentation

[Stefan Monnier]

> I admit I'm not a fan of gimmicks that are smarter than me...

I think you'll like (electric-indent-mode -1), then ;-)

More seriously, this does not necessarily require "smarts":
in some (many?) projects, the coding conventions says precisely
how indentation should be done, so there is no "smartness" involved and
if you don't like what the auto-indentation does, either it's because of
a bug in the code, or it's because you disagree with the conventions (and
overriding the conventions should be rare).

In those cases, typically the coders end up controlling the indentation
only indirectly, e.g. by carefully choosing where they cut the lines, or
by swapping arguments to commutative operations, or by other such means.


        Stefan

Re: indentation

[Emanuel Berg via Users list for the GNU Emacs text editor]

Stefan Monnier wrote:

> More seriously, this does not necessarily require "smarts":
> in some (many?) projects, the coding conventions says
> precisely how indentation should be done, so there is no
> "smartness" involved and if you don't like what the
> auto-indentation does, either it's because of a bug in the
> code, or it's because you disagree with the conventions (and
> overriding the conventions should be rare).

That's exactly right, set up the technology to do the routine
stuff and only where it matters you apply your own creativity
and brilliance so it will be put into just the right place :)

Some people say Emacs is all about automation, other say pro
programmers are so productive with Emacs it is amazing, yet
other say Emacs makes you so creative virtually nothing ever
gets done...

But actually I think one should instead think of all that as
positive entities that work _together_, and not at
all orthogonally. Or at the very least it doesn't HAVE to be
like that!

Like the Greek poets and drama writers of the ancient world,
they had tons of formal rules, methods, a whole scientific
approach to their craft and art, with terminology and
everything. But as it happens, knowing all that was not
a limitation, on the contrary it OPENED the doors of
inspiration and creativity. And made it more fun and
interesting while doing it, I'm sure!

So greetings from Sweden to all Emacs hackers all around the
world, I'll do my best to return to Elisp myself as soon as
possible God willing.

  https://dataswamp.org/~incal/ut/ut.png
  https://dataswamp.org/~incal/ut/ut.webp

-- 
underground experts united
https://dataswamp.org/~incal

Re: indentation

[Wayne Harris via Users list for the GNU Emacs text editor]

Stefan Monnier <monnier@iro.umontreal.ca> writes:

>> Yes, it may be a bug/ feature of the F90 mode. But it got annoying
>> only when
>> the electric mode was active, otherwise the formatting was controlable
>> (e.g. by tab key) and not disturbing.
>
> Indeed.  `electric-indent-mode` presumes that the indentation code
> gets it right.  If that's not the case, then you're better off disabling
> it (or, as Joost points out, just disabling the reindentation by setting
> `electric-indent-inhibit`).
>
> But that doesn't mean we shouldn't try to make the indentation "do the
> right thing" ;-)

FWIW, I almost gave up from going from 24.3 to 27.1 precisely because of

  electric-indent-mode 

without knowing that was the cause of the new behavior (in my
perspective).  Today I was writing some TeX and the following happened.
Let me use ``[]'' to represent the point.

--8<---------------cut here---------------start------------->8---
\noindent {\em Notation.} As we often write polynomials in
finite rings of characterisc 2, let's define
%v
  \[\poly(x) = ...\]
%e
in the same way that it was used in the introduction.  []%% Well...
--8<---------------cut here---------------end--------------->8---

When I pressed RET, I got this

--8<---------------cut here---------------start------------->8---
\noindent {\em Notation.} As we often write polynomials in
finite rings of characterisc 2, let's define
%v
  \[\poly(x) = ...\]
%e
  in the same way that it was used in the introduction.
  []%% Well...
--8<---------------cut here---------------end--------------->8---

I have been reading this thread, so I just turned it off for the first
time.  I got used to it in other ways, but this behavior up there made
me turn it off and leave it off from now on.  (And it scared the hell
out of me when I saw it first.  Lol.)

Having said that, I recognize that many times I get to see new features
because they become the default.  It takes a long while for me to
actually dig new features as an attempt to solve a problem.  But you
know me by now --- I like stability a lot and so I stick to a version
for many, many years.

Re: indentation

[ptlo]

Imposing conventions is of  use when many and changing (and beginner) programmers work on same code. It's not my case. But the problem where it all started is, when I press enter, the new empty line got indented to first character of previous line. There is absolutely no reason to impose  that the block shall continue. Instead, an END statement may follow which is indented differently. Also one can wish to insert an empty line and  then  an automated insertion of spaces for no reason is hard to justify. Indeed I always felt the urge to delete those spaces (still was thinking how to do it as fast as possible and get over without new indentation...)

Strange thing is that I didn't find the electric indent searching "indent" from menu in customization groups.

Cheers

Petr

Re: indentation

[Philip Kaludercic]

<ptlo@centrum.cz> writes:

> But the problem where it all started is, when I press enter, the new
> empty line got indented to first character of previous line. There is
> absolutely no reason to impose that the block shall continue. Instead,
> an END statement may follow which is indented differently. Also one
> can wish to insert an empty line and then an automated insertion of
> spaces for no reason is hard to justify. Indeed I always felt the urge
> to delete those spaces (still was thinking how to do it as fast as
> possible and get over without new indentation...)

What language are we talking about? Maybe it is not clever enough,
ie. you haven't enabled electric-pair-mode? When working with C, that
automatically inserts the opening and closing parentheses, and when I
press enter

      {|}

becomes

      {
        |
      }

just as I would want it. And of course, all instructions should be
intended.

Even if I weren't to enable electric-pair-mode, electric-indent-mode
would do the right thing when closing a block, because it automatically
re-indents the '}', when it is on it's own.

-- 
	Philip K.

Re: indentation

[ptlo]

I'm talking of Fortran, F90 mode. But the same indentation occurs in Fundamental mode too.
When I write parenthesis, I'm used to type both  at once (they are one next to other on keyboard)cand then return by 1 character. I've seen the habit at one teacher years ago.

Petr

Re: indentation

[Thibaut Verron]

On 4/30/21 10:54 AM, ptlo@centrum.cz wrote:
> I'm talking of Fortran, F90 mode. But the same indentation occurs in Fundamental mode too.
> When I write parenthesis, I'm used to type both  at once (they are one next to other on keyboard)cand then return by 1 character. I've seen the habit at one teacher years ago.

Have you tried electric-pair-mode or something similar? Those modes 
automate the insertion of the closing pair, essentially saving you that 
insertion and the C-b.

Some 3rd-party packages such as smartparens also help you switch from 
manual insertion of the pairs to automatic, by silently ignoring the 
closing pair insertion. That is: pressing '(' results in "([])" ([] is 
the point), and pressing ')' then results in "()[]".

Thibaut

Re: indentation

[ptlo]

No, for now I stay away from electric gimmicks :-) But the described manual insertion costs nearly nothing. I mostly try to stick with default modes, because on another computer any customization is lost. But electric indent which became default I couldn't stand.

Cheers

Petr

Re: indentation

[Jean Louis]

* ptlo@centrum.cz <ptlo@centrum.cz> [2021-04-30 10:08]:
> Imposing conventions is of use when many and changing (and beginner)
> programmers work on same code. It's not my case. But the problem
> where it all started is, when I press enter, the new empty line got
> indented to first character of previous line. There is absolutely no
> reason to impose that the block shall continue.

I find that very handy when I am writing lists where list's text is
for 2-3 characters indented like this below:

- Something
  and more
  and one more line

For programming if you use programming mode, it will indent just
right. Which language is it?

To me it looks somehow weird if it is Fortran:
      
      program hello
!     This is a comment line, it is ignored by the compiler
      print *, 'Hello, World!'
      end program hello

As when I mark region and press TAB, somehow I expect different kind
of indentation. That looks weird now. I think it is bug in fortran-mode

Maybe you should M-x report-bug 
      

-- 
Jean

Take action in Free Software Foundation campaigns:
https://www.fsf.org/campaigns

Sign an open letter in support of Richard M. Stallman
https://stallmansupport.org/
https://rms-support-letter.github.io/

Re: indentation

[Stefan Monnier]

> As when I mark region and press TAB, somehow I expect different kind
> of indentation. That looks weird now. I think it is bug in fortran-mode

He's not using `fortran-mode` but `f90-mode`.


        Stefan

Re: indentation

[Tassilo Horn]

Wayne Harris via Users list for the GNU Emacs text editor <help-gnu-emacs@gnu.org> writes:

Hi Wayne,

> Today I was writing some TeX and the following happened.  Let me use
> ``[]'' to represent the point.
>
> \noindent {\em Notation.} As we often write polynomials in
> finite rings of characterisc 2, let's define
> %v
>   \[\poly(x) = ...\]
> %e
> in the same way that it was used in the introduction.  []%% Well...
>
> When I pressed RET, I got this
>
> \noindent {\em Notation.} As we often write polynomials in
> finite rings of characterisc 2, let's define
> %v
>   \[\poly(x) = ...\]
> %e
>   in the same way that it was used in the introduction.
>   []%% Well...

Electric indent works well when you just let Emacs do the indentation.
In your example, Emacs wouldn't indent the inline math (hitting TAB in
that line makes it pop to column 0), and then the next sentence wouldn't
be indented as well.  So basically you are fighting Emacs' LaTeX
indentation rules, and that becomes harder when `electric-indent-mode'
is enabled [1].  (At least with AUCTeX, `fill-paragraph' will also
adjust the indentation.)

FWIW, I'd write your example as

--8<---------------cut here---------------start------------->8---
\noindent {\em Notation.} As we often write polynomials in finite rings of
characterisc 2, let's define
\[
  \poly(x) = ...
\]
in the same way that it was used in the introduction.
--8<---------------cut here---------------end--------------->8---

which is indented according to how AUCTeX would do it or the builtin
`latex-mode' if `latex-indent-within-escaped-parens' is t.

Bye,
Tassilo

Re: indentation

[Emanuel Berg via Users list for the GNU Emacs text editor]

ptlo wrote:

> Imposing conventions is of use when many and changing (and
> beginner) programmers work on same code. It's not my case.
> [...]

OK, unless the word "imposing" makes this mean something that
I don't understand in this context, what you say isn't, to use
your word, the case!

Pro programmers use conventions even (especially) for code
only they work on.

Obey tradition!

-- 
underground experts united
https://dataswamp.org/~incal

Re: indentation

[Wayne Harris via Users list for the GNU Emacs text editor]

Tassilo Horn <tsdh@gnu.org> writes:

> Wayne Harris via Users list for the GNU Emacs text editor
> <help-gnu-emacs@gnu.org> writes:
>
> Hi Wayne,
>
>> Today I was writing some TeX and the following happened.  Let me use
>> ``[]'' to represent the point.
>>
>> \noindent {\em Notation.} As we often write polynomials in
>> finite rings of characterisc 2, let's define
>> %v
>>   \[\poly(x) = ...\]
>> %e
>> in the same way that it was used in the introduction.  []%% Well...
>>
>> When I pressed RET, I got this
>>
>> \noindent {\em Notation.} As we often write polynomials in
>> finite rings of characterisc 2, let's define
>> %v
>>   \[\poly(x) = ...\]
>> %e
>>   in the same way that it was used in the introduction.
>>   []%% Well...
>
> Electric indent works well when you just let Emacs do the indentation.
> In your example, Emacs wouldn't indent the inline math (hitting TAB in
> that line makes it pop to column 0), and then the next sentence wouldn't
> be indented as well.  So basically you are fighting Emacs' LaTeX
> indentation rules, and that becomes harder when `electric-indent-mode'
> is enabled [1].  (At least with AUCTeX, `fill-paragraph' will also
> adjust the indentation.)
>
> FWIW, I'd write your example as
>
> \noindent {\em Notation.} As we often write polynomials in finite rings of
> characterisc 2, let's define
> \[
>   \poly(x) = ...
> \]
> in the same way that it was used in the introduction.
>
> which is indented according to how AUCTeX would do it or the builtin
> `latex-mode' if `latex-indent-within-escaped-parens' is t.

Thank you.  I had no idea what was going on there.  Clearly the root
cause of the problem is not understanding what is going on.  That's
life: I took a while to begin using paredit-mode precisely for not being
able to minimially live with it, but it's been really worth it to try.
(I use it constantly now.)  Maybe the same will happen with
electric-indent-mode.

Definitely consider this subthread a request for help, not a complaint.
But like the OP remarked, as these different behaviors appear after an
upgrade to a newer version, it's a bit scary to imagine we won't survive
with the new version.

Re: indentation

[Tassilo Horn]

Wayne Harris via Users list for the GNU Emacs text editor <help-gnu-emacs@gnu.org> writes:

Hey Wayne,

>> FWIW, I'd write your example as
>>
>> \noindent {\em Notation.} As we often write polynomials in finite rings of
>> characterisc 2, let's define
>> \[
>>   \poly(x) = ...
>> \]
>> in the same way that it was used in the introduction.
>>
>> which is indented according to how AUCTeX would do it or the builtin
>> `latex-mode' if `latex-indent-within-escaped-parens' is t.
>
> Thank you.  I had no idea what was going on there.  Clearly the root
> cause of the problem is not understanding what is going on.  That's
> life:

Absolutely!

> I took a while to begin using paredit-mode precisely for not being
> able to minimially live with it, but it's been really worth it to try.
> (I use it constantly now.)  Maybe the same will happen with
> electric-indent-mode.

Possibly.  If you want to, you might also want to try the
`aggressive-indent' package (from MELPA; its minor-mode is
`aggressive-indent-mode') which is essentially `electric-indent-mode' on
steroids, i.e., it indents the current function according to the mode's
rules on every edit which makes it completely impossible to fight
against the mode's indentation rules.  (Of course, aggressive-indent is
mostly suited with programming modes; it works very well with lisp.)

Bye,
Tassilo

Re: indentation

[Wayne Harris via Users list for the GNU Emacs text editor]

Tassilo Horn <tsdh@gnu.org> writes:

> Wayne Harris via Users list for the GNU Emacs text editor
> <help-gnu-emacs@gnu.org> writes:
>
> Hey Wayne,
>
>>> FWIW, I'd write your example as
>>>
>>> \noindent {\em Notation.} As we often write polynomials in finite rings of
>>> characterisc 2, let's define
>>> \[
>>>   \poly(x) = ...
>>> \]
>>> in the same way that it was used in the introduction.
>>>
>>> which is indented according to how AUCTeX would do it or the builtin
>>> `latex-mode' if `latex-indent-within-escaped-parens' is t.
>>
>> Thank you.  I had no idea what was going on there.  Clearly the root
>> cause of the problem is not understanding what is going on.  That's
>> life:
>
> Absolutely!
>
>> I took a while to begin using paredit-mode precisely for not being
>> able to minimially live with it, but it's been really worth it to try.
>> (I use it constantly now.)  Maybe the same will happen with
>> electric-indent-mode.
>
> Possibly.  If you want to, you might also want to try the
> `aggressive-indent' package (from MELPA; its minor-mode is
> `aggressive-indent-mode') which is essentially `electric-indent-mode' on
> steroids, i.e., it indents the current function according to the mode's
> rules on every edit which makes it completely impossible to fight
> against the mode's indentation rules.  (Of course, aggressive-indent is
> mostly suited with programming modes; it works very well with lisp.)

Lol!  I like that a lot, actually.  It would show me what are the rules.
I didn't it in the previous message, but I almost wrote that I was going
against it because I didn't know what the rules were in the first
place.  If software will do a reasonable job and all by itself, I'm
definitely willing to accept the reasonable result.

So, I'll report back if my experience is interesting wih the
aggressive-indent package.  Thanks for pointing it out.

Re: indentation

[Stefan Monnier via Users list for the GNU Emacs text editor]

>> Possibly.  If you want to, you might also want to try the
>> `aggressive-indent' package (from MELPA; its minor-mode is
>> `aggressive-indent-mode')

It's also on GNU ELPA, BTW.


        Stefan

Indentation

[Pierre L. Nageoire]

Hi,

A few days ago with a macro of the form (define-something indentation
below was of two characters. I find it suitable ... But after installing
the last git version of emacs I got only one character : I dislike it !
There might be a variable to customize somewhere but don't know where !

Regards 

Re: Indentation

[Emanuel Berg via Users list for the GNU Emacs text editor]

Pierre L. Nageoire wrote:

> A few days ago with a macro of the form (define-something
> indentation below was of two characters. I find it suitable
> ... But after installing the last git version of emacs I got
> only one character : I dislike it ! There might be
> a variable to customize somewhere but don't know where !

You mean this looks like this?

(define-error
 nil nil)

Try `eval'ing this ...

(put 'define-error 'lisp-indent-function 0)

Then it looks like this, right?

(define-error
  nil nil)

Don't know what happened or why tho ...

-- 
underground experts united
https://dataswamp.org/~incal

Re: Indentation

[Pierre L. Nageoire]

Hi,

Emanuel Berg via Users list for the GNU Emacs text editor
<help-gnu-emacs@gnu.org> writes:

> Pierre L. Nageoire wrote:
>
>> A few days ago with a macro of the form (define-something
>> indentation below was of two characters. I find it suitable
>> ... But after installing the last git version of emacs I got
>> only one character : I dislike it ! There might be
>> a variable to customize somewhere but don't know where !
>
> You mean this looks like this?
>
> (define-error
>  nil nil)
   Exactly !


>
> Try `eval'ing this ...
>
> (put 'define-error 'lisp-indent-function 0)

  I can actually do that for all my macros that start with define  

>
> Then it looks like this, right?
>
> (define-error
>   nil nil)


Yes exactly 
>
> Don't know what happened or why tho ...


If someone could explain why the indent mechanism has soddenly been
changed I would be glad !

Regards

Re: Indentation

[Robert Pluim]

>>>>> On Thu, 27 Jan 2022 04:30:36 +0100, "Pierre L. Nageoire" <devel@pollock-nageoire.net> said:

    Pierre> If someone could explain why the indent mechanism has soddenly been
    Pierre> changed I would be glad !

    commit 32df2034234056bf24312ef5883671b59a387520
    Author: Lars Ingebrigtsen <larsi@gnus.org>
    Date:   Mon Oct 18 10:00:20 2021 +0200

        Remove the "def" indentation heuristic

        * lisp/emacs-lisp/lisp-mode.el (lisp-indent-function): Don't
        indent function calls with names that that start with "def"
        specially (bug#43329).

and the corresponding etc/NEWS entry:

    ** 'def' indentation changes.
    In 'emacs-lisp-mode', forms with a symbol with a name that start with
    "def" have been automatically indented as if they were 'defun'-like
    forms, for instance:

        (defzot 1
          2 3)

    This heuristic has now been removed, and all functions/macros that
    want to be indented this way have to be marked with

        (declare (indent defun))

    or the like.  If the function/macro definition itself can't be
    changed, the indentation can also be adjusted by saying something
    like:

        (put 'defzot 'lisp-indent-function 'defun)

Robert
-- 

Re: Indentation

[Pierre L. Nageoire]

Hi Robert,

Many thanks to have extracted this pertienent part of the emacs news !
First I now understand why the situation is so ; and secondly I know how
to custimize it for my own needs ! Perfect !


Regards 

Robert Pluim <rpluim@gmail.com> writes:

>>>>>> On Thu, 27 Jan 2022 04:30:36 +0100, "Pierre L. Nageoire"
> <devel@pollock-nageoire.net> said:
>
>     Pierre> If someone could explain why the indent mechanism has soddenly been
>     Pierre> changed I would be glad !
>
>     commit 32df2034234056bf24312ef5883671b59a387520
>     Author: Lars Ingebrigtsen <larsi@gnus.org>
>     Date:   Mon Oct 18 10:00:20 2021 +0200
>
>         Remove the "def" indentation heuristic
>
>         * lisp/emacs-lisp/lisp-mode.el (lisp-indent-function): Don't
>         indent function calls with names that that start with "def"
>         specially (bug#43329).
>
> and the corresponding etc/NEWS entry:
>
>     ** 'def' indentation changes.
>     In 'emacs-lisp-mode', forms with a symbol with a name that start with
>     "def" have been automatically indented as if they were 'defun'-like
>     forms, for instance:
>
>         (defzot 1
>           2 3)
>
>     This heuristic has now been removed, and all functions/macros that
>     want to be indented this way have to be marked with
>
>         (declare (indent defun))
>
>     or the like.  If the function/macro definition itself can't be
>     changed, the indentation can also be adjusted by saying something
>     like:
>
>         (put 'defzot 'lisp-indent-function 'defun)
>
> Robert