From: joakim@verona.se
To: Eli Zaretskii <eliz@gnu.org>
Cc: Jean-Christophe Helary
<jean.christophe.helary@traduction-libre.org>,
emacs-devel@gnu.org
Subject: Re: Ctrl-[ ?
Date: Fri, 07 Jun 2019 10:34:46 +0200 [thread overview]
Message-ID: <877e9x23q1.fsf@chopper> (raw)
In-Reply-To: <83v9xirdcr.fsf@gnu.org> (Eli Zaretskii's message of "Thu, 06 Jun 2019 17:35:16 +0300")
Eli Zaretskii <eliz@gnu.org> writes:
>> From: Jean-Christophe Helary <jean.christophe.helary@traduction-libre.org>
>> Date: Thu, 6 Jun 2019 22:25:17 +0900
>>
>> Why is it useful to have different behavior on GUI and TTY frames?
>>
>> Because expectations are different ?
>
> Are they? I don't think so.
Here is my datapoint.
I use emacs in both tty and gui frame.
Mostly I use tty because my emacs runs on a remote server and using mosh
to connect to it is very convenient. But I also use x2go to connect to
the same emacs instance with a gui, using the emacs mtty feature which
is fantastic.
Some keybindings work in gui mode but not in tty mode, like C-RET for
instance. Since theres a shortage of convenient keybindings that work in
both tty and gui this is a bit of a hassle.
Now, some terminal emulators allow configuration of extended escape
sequences being used. So for these emulators one could in principle have
the same behaviour in both gui and tty mode. Sadly my experience is that
this is too flaky to be used, since I've so far found no terminal
emulator that implements all the features I'd like, together with Mosh.
>
--
Joakim Verona
joakim@verona.se
next prev parent reply other threads:[~2019-06-07 8:34 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-06 4:49 Ctrl-[ ? Jean-Christophe Helary
2019-06-06 7:26 ` Jean-Christophe Helary
2019-06-06 8:13 ` Andreas Schwab
2019-06-06 10:12 ` Eli Zaretskii
2019-06-06 12:37 ` Jean-Christophe Helary
2019-06-06 13:02 ` Eli Zaretskii
2019-06-06 13:28 ` Jean-Christophe Helary
2019-06-06 12:44 ` Mattias Engdegård
2019-06-06 13:01 ` Eli Zaretskii
2019-06-06 13:25 ` Jean-Christophe Helary
2019-06-06 14:35 ` Eli Zaretskii
2019-06-07 6:21 ` Marcin Borkowski
2019-06-07 8:34 ` joakim [this message]
2019-06-06 13:26 ` Clément Pit-Claudel
2019-06-06 13:32 ` Juanma Barranquero
2019-06-06 14:37 ` Eli Zaretskii
2019-06-06 15:01 ` Jean-Christophe Helary
2019-06-06 15:33 ` Clément Pit-Claudel
2019-06-06 17:28 ` Eli Zaretskii
2019-06-06 17:33 ` Clément Pit-Claudel
2019-06-06 17:48 ` Eli Zaretskii
2019-06-06 18:34 ` Eli Zaretskii
2019-06-06 18:48 ` Clément Pit-Claudel
2019-06-06 19:18 ` Eli Zaretskii
2019-06-07 15:02 ` Clément Pit-Claudel
2019-06-07 19:44 ` Eli Zaretskii
2019-06-07 21:01 ` Clément Pit-Claudel
2019-06-07 23:48 ` Jean-Christophe Helary
2019-06-08 6:23 ` Eli Zaretskii
2019-06-12 8:08 ` Søren Pilgård
2019-06-12 8:56 ` Ergus
2019-06-06 18:55 ` Noam Postavsky
2019-06-10 0:23 ` Stefan Kangas
2019-06-10 0:42 ` Jean-Christophe Helary
2019-06-10 16:42 ` Eli Zaretskii
2019-06-11 15:36 ` Michael Welsh Duggan
2019-06-11 15:55 ` Eli Zaretskii
2019-06-11 16:31 ` Yuri Khan
2019-06-12 12:22 ` Stefan Kangas
2019-06-12 12:14 ` Stefan Kangas
2019-06-12 13:12 ` Alan Mackenzie
2019-06-12 13:38 ` Óscar Fuentes
2019-06-06 13:28 ` Óscar Fuentes
2019-06-06 14:00 ` Drew Adams
2019-06-06 12:58 ` Stefan Monnier
2019-06-06 12:58 ` Ralph Seichter
2019-06-06 13:42 ` tomas
2019-06-06 14:08 ` Jean-Christophe Helary
2019-06-06 14:25 ` Stefan Monnier
2019-06-06 15:27 ` Jean-Christophe Helary
2019-06-06 18:29 ` Noam Postavsky
2019-06-06 23:08 ` Jean-Christophe Helary
2019-06-06 23:26 ` Noam Postavsky
2019-06-06 23:35 ` Jean-Christophe Helary
2019-06-07 6:24 ` Eli Zaretskii
2019-06-07 11:43 ` Noam Postavsky
2019-06-07 13:16 ` Jean-Christophe Helary
2019-06-07 22:04 ` Stefan Monnier
2019-06-08 6:22 ` Eli Zaretskii
2019-06-08 14:14 ` Stefan Monnier
2019-06-07 3:36 ` Emanuel Berg via help-gnu-emacs
2019-06-07 4:30 ` Jean-Christophe Helary
2019-06-07 4:43 ` Emanuel Berg via help-gnu-emacs
2019-06-07 5:04 ` Jean-Christophe Helary
2019-06-07 6:15 ` Eli Zaretskii
2019-06-07 8:04 ` Óscar Fuentes
2019-06-07 8:44 ` Eli Zaretskii
2019-06-07 13:19 ` Jean-Christophe Helary
2019-06-07 13:54 ` Noam Postavsky
2019-06-07 14:23 ` Jean-Christophe Helary
2019-06-07 15:17 ` Noam Postavsky
2019-06-07 13:45 ` Óscar Fuentes
2019-06-07 14:20 ` Eli Zaretskii
2019-06-07 18:20 ` Óscar Fuentes
2019-06-07 20:16 ` Eli Zaretskii
2019-06-07 16:30 ` tomas
2019-06-08 0:05 ` Francis Belliveau
2019-06-08 0:31 ` Óscar Fuentes
2019-06-08 8:44 ` tomas
2019-06-08 11:48 ` 조성빈 via help-gnu-emacs
2019-06-08 11:56 ` tomas
2019-06-08 13:06 ` Óscar Fuentes
2019-06-08 13:30 ` Eli Zaretskii
2019-06-08 13:54 ` Jean-Christophe Helary
2019-06-08 14:03 ` tomas
2019-06-08 14:22 ` Jean-Christophe Helary
2019-06-08 15:42 ` Eli Zaretskii
2019-06-09 0:52 ` Jean-Christophe Helary
2019-06-09 6:19 ` Eli Zaretskii
2019-06-09 6:51 ` Jean-Christophe Helary
2019-06-08 13:58 ` tomas
2019-06-08 19:40 ` Óscar Fuentes
2019-06-08 20:09 ` Eli Zaretskii
2019-06-08 20:28 ` tomas
2019-06-08 21:03 ` Francis Belliveau
2019-06-08 21:38 ` Óscar Fuentes
2019-06-09 0:25 ` Stefan Monnier
2019-06-09 1:24 ` Óscar Fuentes
2019-06-18 22:25 ` Stefan Monnier
2019-06-11 23:05 ` Francis Belliveau
2019-06-14 6:51 ` Stefan Monnier
2019-06-14 12:06 ` [offtopic] " Van L
2019-06-14 12:24 ` tomas
2019-06-15 9:12 ` Van L
2019-06-15 9:44 ` tomas
2019-06-15 12:38 ` Van L
2019-06-09 6:37 ` Eli Zaretskii
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=877e9x23q1.fsf@chopper \
--to=joakim@verona.se \
--cc=eliz@gnu.org \
--cc=emacs-devel@gnu.org \
--cc=jean.christophe.helary@traduction-libre.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.