* Unnumbered sections in LaTeX export @ 2009-09-13 21:06 Thomas S. Dye 2009-09-14 1:26 ` Matt Lundin 2009-09-14 20:21 ` Sebastian Rose 0 siblings, 2 replies; 7+ messages in thread From: Thomas S. Dye @ 2009-09-13 21:06 UTC (permalink / raw To: emacs-orgmode Aloha all, The variable org-export-latex-classes has a specification for unnumbered sections but I haven't found any documentation how to mark up the org file to activate them. I might have missed something obvious. Could someone give me a pointer to documentation or some help how to markup the org file? All the best, Tom ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Unnumbered sections in LaTeX export 2009-09-13 21:06 Unnumbered sections in LaTeX export Thomas S. Dye @ 2009-09-14 1:26 ` Matt Lundin 2009-09-14 20:21 ` Sebastian Rose 1 sibling, 0 replies; 7+ messages in thread From: Matt Lundin @ 2009-09-14 1:26 UTC (permalink / raw To: Thomas S. Dye; +Cc: emacs-orgmode "Thomas S. Dye" <tsd@tsdye.com> writes: > The variable org-export-latex-classes has a specification for > unnumbered sections but I haven't found any documentation how to mark > up the org file to activate them. I might have missed something > obvious. Could someone give me a pointer to documentation or some > help how to markup the org file? #+OPTIONS: num:nil http://orgmode.org/manual/Export-options.html Best, Matt ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Unnumbered sections in LaTeX export 2009-09-13 21:06 Unnumbered sections in LaTeX export Thomas S. Dye 2009-09-14 1:26 ` Matt Lundin @ 2009-09-14 20:21 ` Sebastian Rose [not found] ` <1CCB79D7-DB7A-4274-B6E8-F53EE2B69638@tsdye.com> 1 sibling, 1 reply; 7+ messages in thread From: Sebastian Rose @ 2009-09-14 20:21 UTC (permalink / raw To: Thomas S. Dye; +Cc: emacs-orgmode "Thomas S. Dye" <tsd@tsdye.com> writes: > Aloha all, > > The variable org-export-latex-classes has a specification for unnumbered > sections but I haven't found any documentation how to mark up the org file to > activate them. I might have missed something obvious. Could someone give me a > pointer to documentation or some help how to markup the org file? > > All the best, > Tom Thomas, Are you looking for M-x customize-variable RET org-export-with-section-numbers RET ?? As Matt wrote, per file setting is: #+OPTIONS: num:nil Sebastian ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <1CCB79D7-DB7A-4274-B6E8-F53EE2B69638@tsdye.com>]
[parent not found: <87ocpcvq2t.fsf@gmx.de>]
* Re: Unnumbered sections in LaTeX export [not found] ` <87ocpcvq2t.fsf@gmx.de> @ 2009-09-15 7:43 ` Thomas S. Dye [not found] ` <87iqfkayuc.fsf@gmx.de> 0 siblings, 1 reply; 7+ messages in thread From: Thomas S. Dye @ 2009-09-15 7:43 UTC (permalink / raw To: Sebastian Rose; +Cc: emacs-orgmode On Sep 14, 2009, at 5:34 PM, Sebastian Rose wrote: > "Thomas S. Dye" <tsd@tsdye.com> writes: >> On Sep 14, 2009, at 10:21 AM, Sebastian Rose wrote: >> >>> "Thomas S. Dye" <tsd@tsdye.com> writes: >>>> Aloha all, >>>> >>>> The variable org-export-latex-classes has a specification for >>>> unnumbered >>>> sections but I haven't found any documentation how to mark up >>>> the org file >>>> to >>>> activate them. I might have missed something obvious. Could >>>> someone give >>>> me a >>>> pointer to documentation or some help how to markup the org file? >>>> >>>> All the best, >>>> Tom >>> >>> Thomas, >>> >>> Are you looking for >>> >>> M-x customize-variable RET org-export-with-section-numbers RET >>> >>> ?? >>> >>> As Matt wrote, per file setting is: >>> >>> #+OPTIONS: num:nil >>> >>> >>> >>> >>> Sebastian >> >> Yes, that is it. Thanks! >> >> Is there any way to set this for an individual headline? Or, is it >> effective >> only for the entire file, or portion of file, that is exported? >> >> All the best, >> Tom > > > No. There is just the global default (`org-export-with-section- > numbers') > and the per-file setting. Both entire files. > > > Best wishes > > > Sebastian Thanks Sebastian. I appreciate the expert assistance. I have a simple export to Beamer working and was trying to implement automatic export of columns, too. The starred sections were going to be placeholders for the columns heading level when it wasn't used. I've found that skipping a headline level in the source causes the latex exporter to skip over subsequent inferior levels, so it isn't possible to assign a heading level to columns and then use them or not as the case requires. I'm actually quite happy with the simple export I have working. Beamer templates that show the document structure are easy to write to using org-mode, where document structure is so important. All the best, Tom ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <87iqfkayuc.fsf@gmx.de>]
* Re: Unnumbered sections in LaTeX export [not found] ` <87iqfkayuc.fsf@gmx.de> @ 2009-09-15 22:04 ` Thomas S. Dye 2009-09-18 17:29 ` Carsten Dominik 0 siblings, 1 reply; 7+ messages in thread From: Thomas S. Dye @ 2009-09-15 22:04 UTC (permalink / raw To: Sebastian Rose; +Cc: emacs-orgmode On Sep 15, 2009, at 7:42 AM, Sebastian Rose wrote: > "Thomas S. Dye" <tsd@tsdye.com> writes: > >> Thanks Sebastian. I appreciate the expert assistance. I have a >> simple export >> to Beamer working and was trying to implement automatic export of >> columns, too. >> The starred sections were going to be placeholders for the columns >> heading >> level when it wasn't used. I've found that skipping a headline >> level in the >> source causes the latex exporter to skip over subsequent inferior >> levels, so it >> isn't possible to assign a heading level to columns and then use >> them or not as >> the case requires. > > You could try to add a class to `org-export-latex-classes'. For such a > class, you can define a mapping for each headline level: > > > ("my-beamer-class" "\\documentclass...\\usepackage{beamer}" > ("\\chapter{%s}" . "\\my-chapter*{%s}") > ("\\section{%s}" . "\\my-section*{%s}") > ("\\subsection{%s}" . "\\my-subsection*{%s}") > ("\\subsubsection{%s}" . "\\my-subsubsection*{%s}"))) > > I don't know if this is an easy thing to do, since I only did this > once > a long time ago. > But it seems it's worth a try. > > > See: > http://orgmode.org/manual/Sectioning-structure.html#Sectioning-structure > http://127.0.0.1/devel/org-notes/org-search.php?speedbar=1&main=/devel/org-notes/org-search.php > > > > > Sebastian Yes, that is what I'm playing around with. I have a useful, but simple export to beamer working. I've been trying without success to implement beamer's \begin{columns} ... \end{columns} environment. This is a fairly common construct in beamer that occurs inside some frames but not in others. It seems natural to put it like this: ("\\section{%s}" . "\\section{%s}") ("\\subsection{%s}" . "\\subsection{%s}") ("\\begin{frame}\\frametitle{%s}" "\\end{frame}" "\\begin{frame}\ \frametitle{%s}" "\\end{frame}") ("\\begin{columns}\\label{%s}" "\\end{columns}" "\\begin{columns}\ \label{%s}" "\\end{columns}") where the \label{%s} puts the mandatory use of %s somewhere it won't affect the LaTeX compilation. The problem with this is that for frames where columns aren't wanted, simply leaving out the fourth level in org means that everything below it won't be exported. This example results in an empty frame (Item 1 and Item 2 are dropped from the export): * Section head ** Subsection head *** Frame title ***** Item 1 ***** Item 2 It seems that a placeholder of some kind is needed if the columns environment isn't wanted. Initially, I explored using the definition for the unnumbered sections, like this: ("\\begin{columns}\\label{%s}" "\\end{columns}" "%%\\begin{columns}\ \label{%s}" "%%\\end{columns}") which would use a LaTeX comment as a placeholder. This won't work because the switch for numbered/unnumbered sections is set at the file level and not for individual instances. Then, I thought to define a do-nothing environment in LaTeX \newenvironment{nocolumns}{}{} set it up in .emacs like this: ("\\begin{%s}" "\\end{%s}" "\\begin{%s}" "\\end{%s}") and then put this in my .org file: * Section head ** Subsection head *** Frame title **** nocolumns ***** Item 1 ***** Item 2 But this doesn't work because %s doesn't expand in \\end{%s}. I get \begin{nocolumns} ... \end{%s}, which LaTeX doesn't like. So, I'm stumped for now, but still pleased to have a simple export from org to beamer working, albeit one that produces frames without columns. All the best, Tom ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Unnumbered sections in LaTeX export 2009-09-15 22:04 ` Thomas S. Dye @ 2009-09-18 17:29 ` Carsten Dominik 2009-09-19 16:32 ` Thomas S. Dye 0 siblings, 1 reply; 7+ messages in thread From: Carsten Dominik @ 2009-09-18 17:29 UTC (permalink / raw To: Thomas S. Dye; +Cc: emacs-orgmode Hi Thomas, I have not really looks at this problem, but would it help to use a clever combination of org-export-latex-low-levels and org- export=headline-levels? - Carsten On Sep 15, 2009, at 11:04 PM, Thomas S. Dye wrote: > > On Sep 15, 2009, at 7:42 AM, Sebastian Rose wrote: > >> "Thomas S. Dye" <tsd@tsdye.com> writes: >> >>> Thanks Sebastian. I appreciate the expert assistance. I have a >>> simple export >>> to Beamer working and was trying to implement automatic export of >>> columns, too. >>> The starred sections were going to be placeholders for the >>> columns heading >>> level when it wasn't used. I've found that skipping a headline >>> level in the >>> source causes the latex exporter to skip over subsequent inferior >>> levels, so it >>> isn't possible to assign a heading level to columns and then use >>> them or not as >>> the case requires. >> >> You could try to add a class to `org-export-latex-classes'. For >> such a >> class, you can define a mapping for each headline level: >> >> >> ("my-beamer-class" "\\documentclass...\\usepackage{beamer}" >> ("\\chapter{%s}" . "\\my-chapter*{%s}") >> ("\\section{%s}" . "\\my-section*{%s}") >> ("\\subsection{%s}" . "\\my-subsection*{%s}") >> ("\\subsubsection{%s}" . "\\my-subsubsection*{%s}"))) >> >> I don't know if this is an easy thing to do, since I only did this >> once >> a long time ago. >> But it seems it's worth a try. >> >> >> See: >> http://orgmode.org/manual/Sectioning-structure.html#Sectioning-structure >> http://127.0.0.1/devel/org-notes/org-search.php?speedbar=1&main=/devel/org-notes/org-search.php >> >> >> >> >> Sebastian > > Yes, that is what I'm playing around with. I have a useful, but > simple export to beamer working. I've been trying without success > to implement beamer's \begin{columns} ... \end{columns} > environment. This is a fairly common construct in beamer that > occurs inside some frames but not in others. It seems natural to > put it like this: > > ("\\section{%s}" . "\\section{%s}") > ("\\subsection{%s}" . "\\subsection{%s}") > ("\\begin{frame}\\frametitle{%s}" "\\end{frame}" "\\begin{frame}\ > \frametitle{%s}" "\\end{frame}") > ("\\begin{columns}\\label{%s}" "\\end{columns}" "\\begin{columns}\ > \label{%s}" "\\end{columns}") > > where the \label{%s} puts the mandatory use of %s somewhere it won't > affect the LaTeX compilation. > > The problem with this is that for frames where columns aren't > wanted, simply leaving out the fourth level in org means that > everything below it won't be exported. > > This example results in an empty frame (Item 1 and Item 2 are > dropped from the export): > > * Section head > ** Subsection head > *** Frame title > ***** Item 1 > ***** Item 2 > > It seems that a placeholder of some kind is needed if the columns > environment isn't wanted. > > Initially, I explored using the definition for the unnumbered > sections, like this: > > ("\\begin{columns}\\label{%s}" "\\end{columns}" "%%\\begin{columns}\ > \label{%s}" "%%\\end{columns}") > > which would use a LaTeX comment as a placeholder. This won't work > because the switch for numbered/unnumbered sections is set at the > file level and not for individual instances. > > Then, I thought to define a do-nothing environment in LaTeX > > \newenvironment{nocolumns}{}{} > > set it up in .emacs like this: > > ("\\begin{%s}" "\\end{%s}" "\\begin{%s}" "\\end{%s}") > > and then put this in my .org file: > > * Section head > ** Subsection head > *** Frame title > **** nocolumns > ***** Item 1 > ***** Item 2 > > But this doesn't work because %s doesn't expand in \\end{%s}. I get > \begin{nocolumns} ... \end{%s}, which LaTeX doesn't like. > > So, I'm stumped for now, but still pleased to have a simple export > from org to beamer working, albeit one that produces frames without > columns. > > All the best, > Tom > > > > > > _______________________________________________ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Unnumbered sections in LaTeX export 2009-09-18 17:29 ` Carsten Dominik @ 2009-09-19 16:32 ` Thomas S. Dye 0 siblings, 0 replies; 7+ messages in thread From: Thomas S. Dye @ 2009-09-19 16:32 UTC (permalink / raw To: Carsten Dominik; +Cc: emacs-orgmode Hi Carsten, I was trying to combine these two variables cleverly but couldn't come up with a solution that worked. I'd like a certain level, say ***, to be one thing some times and another thing at other times in the same output. It would be neat if org-export-latex-low-levels could be set up like this: ("\\begin{%s}" "\\end{%s}" "\\begin{%s}" "\\end{%s}") but when I tried it, %s was expanded only in the first of each pair. A construct like this would allow the user to export any environment on a case by case basis. So, in my case, I could have this in my org file when I want columns: *** columns And this in the instances where I don't want columns: *** nocolumns (assuming nocolumns is a suitably defined LaTeX command). All the best, Tom On Sep 18, 2009, at 7:29 AM, Carsten Dominik wrote: > Hi Thomas, > > I have not really looks at this problem, but would it help to use > a clever combination of org-export-latex-low-levels and org- > export=headline-levels? > > - Carsten > > On Sep 15, 2009, at 11:04 PM, Thomas S. Dye wrote: > >> >> On Sep 15, 2009, at 7:42 AM, Sebastian Rose wrote: >> >>> "Thomas S. Dye" <tsd@tsdye.com> writes: >>> >>>> Thanks Sebastian. I appreciate the expert assistance. I have a >>>> simple export >>>> to Beamer working and was trying to implement automatic export >>>> of columns, too. >>>> The starred sections were going to be placeholders for the >>>> columns heading >>>> level when it wasn't used. I've found that skipping a headline >>>> level in the >>>> source causes the latex exporter to skip over subsequent >>>> inferior levels, so it >>>> isn't possible to assign a heading level to columns and then use >>>> them or not as >>>> the case requires. >>> >>> You could try to add a class to `org-export-latex-classes'. For >>> such a >>> class, you can define a mapping for each headline level: >>> >>> >>> ("my-beamer-class" "\\documentclass...\\usepackage{beamer}" >>> ("\\chapter{%s}" . "\\my-chapter*{%s}") >>> ("\\section{%s}" . "\\my-section*{%s}") >>> ("\\subsection{%s}" . "\\my-subsection*{%s}") >>> ("\\subsubsection{%s}" . "\\my-subsubsection*{%s}"))) >>> >>> I don't know if this is an easy thing to do, since I only did this >>> once >>> a long time ago. >>> But it seems it's worth a try. >>> >>> >>> See: >>> http://orgmode.org/manual/Sectioning-structure.html#Sectioning-structure >>> http://127.0.0.1/devel/org-notes/org-search.php?speedbar=1&main=/devel/org-notes/org-search.php >>> >>> >>> >>> >>> Sebastian >> >> Yes, that is what I'm playing around with. I have a useful, but >> simple export to beamer working. I've been trying without success >> to implement beamer's \begin{columns} ... \end{columns} >> environment. This is a fairly common construct in beamer that >> occurs inside some frames but not in others. It seems natural to >> put it like this: >> >> ("\\section{%s}" . "\\section{%s}") >> ("\\subsection{%s}" . "\\subsection{%s}") >> ("\\begin{frame}\\frametitle{%s}" "\\end{frame}" "\\begin{frame}\ >> \frametitle{%s}" "\\end{frame}") >> ("\\begin{columns}\\label{%s}" "\\end{columns}" "\\begin{columns}\ >> \label{%s}" "\\end{columns}") >> >> where the \label{%s} puts the mandatory use of %s somewhere it >> won't affect the LaTeX compilation. >> >> The problem with this is that for frames where columns aren't >> wanted, simply leaving out the fourth level in org means that >> everything below it won't be exported. >> >> This example results in an empty frame (Item 1 and Item 2 are >> dropped from the export): >> >> * Section head >> ** Subsection head >> *** Frame title >> ***** Item 1 >> ***** Item 2 >> >> It seems that a placeholder of some kind is needed if the columns >> environment isn't wanted. >> >> Initially, I explored using the definition for the unnumbered >> sections, like this: >> >> ("\\begin{columns}\\label{%s}" "\\end{columns}" "%%\\begin{columns}\ >> \label{%s}" "%%\\end{columns}") >> >> which would use a LaTeX comment as a placeholder. This won't work >> because the switch for numbered/unnumbered sections is set at the >> file level and not for individual instances. >> >> Then, I thought to define a do-nothing environment in LaTeX >> >> \newenvironment{nocolumns}{}{} >> >> set it up in .emacs like this: >> >> ("\\begin{%s}" "\\end{%s}" "\\begin{%s}" "\\end{%s}") >> >> and then put this in my .org file: >> >> * Section head >> ** Subsection head >> *** Frame title >> **** nocolumns >> ***** Item 1 >> ***** Item 2 >> >> But this doesn't work because %s doesn't expand in \\end{%s}. I >> get \begin{nocolumns} ... \end{%s}, which LaTeX doesn't like. >> >> So, I'm stumped for now, but still pleased to have a simple export >> from org to beamer working, albeit one that produces frames without >> columns. >> >> All the best, >> Tom >> >> >> >> >> >> _______________________________________________ >> Emacs-orgmode mailing list >> Remember: use `Reply All' to send replies to the list. >> Emacs-orgmode@gnu.org >> http://lists.gnu.org/mailman/listinfo/emacs-orgmode > ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2009-09-19 16:45 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-09-13 21:06 Unnumbered sections in LaTeX export Thomas S. Dye 2009-09-14 1:26 ` Matt Lundin 2009-09-14 20:21 ` Sebastian Rose [not found] ` <1CCB79D7-DB7A-4274-B6E8-F53EE2B69638@tsdye.com> [not found] ` <87ocpcvq2t.fsf@gmx.de> 2009-09-15 7:43 ` Thomas S. Dye [not found] ` <87iqfkayuc.fsf@gmx.de> 2009-09-15 22:04 ` Thomas S. Dye 2009-09-18 17:29 ` Carsten Dominik 2009-09-19 16:32 ` Thomas S. Dye
Code repositories for project(s) associated with this external index https://git.savannah.gnu.org/cgit/emacs.git https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.