* navigating between non-code blocks? @ 2013-01-15 20:50 Bill White 2013-02-08 16:11 ` Bastien 0 siblings, 1 reply; 12+ messages in thread From: Bill White @ 2013-01-15 20:50 UTC (permalink / raw) To: emacs-orgmode Has anyone thought about setting up navigation among any old kinds of blocks, analogous to org-babel-next-src-block? I've whipped up a dynamic block that displays a file's contents: #+begin: file :file "/ssh:server.example.com:/small/log/file1.txt" file1 contents #+end: #+begin: file :file "/ssh:anotherserver.example.com:/small/log/file2.txt" file2 contents #+end: I sometimes have a lot of these in an org file and it would be handy to navigate among them easily. It seems that block navigation is set up to work only with *code* blocks. Cheers - bw -- Bill White . billw@wolfram.com "No ma'am, we're musicians." ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: navigating between non-code blocks? 2013-01-15 20:50 navigating between non-code blocks? Bill White @ 2013-02-08 16:11 ` Bastien 2013-02-08 16:47 ` Sebastien Vauban 2013-02-08 19:25 ` Bill White 0 siblings, 2 replies; 12+ messages in thread From: Bastien @ 2013-02-08 16:11 UTC (permalink / raw) To: Bill White; +Cc: emacs-orgmode Hi Bill, Bill White <billw@wolfram.com> writes: > I sometimes have a lot of these in an org file and it would be handy > to navigate among them easily. It seems that block navigation is set > up to work only with *code* blocks. You now have C-c C-F (`org-next-block') C-c C-B (`org-previous-block') for navigating blocks. Thanks for the suggestion! -- Bastien ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: navigating between non-code blocks? 2013-02-08 16:11 ` Bastien @ 2013-02-08 16:47 ` Sebastien Vauban 2013-02-08 18:39 ` Bastien 2013-02-08 19:25 ` Bill White 1 sibling, 1 reply; 12+ messages in thread From: Sebastien Vauban @ 2013-02-08 16:47 UTC (permalink / raw) To: emacs-orgmode-mXXj517/zsQ Hi Bastien, Bastien wrote: > Bill White <billw-BUE4RdJlFM5BDgjK7y7TUQ@public.gmane.org> writes: > >> I sometimes have a lot of these in an org file and it would be handy to >> navigate among them easily. It seems that block navigation is set up to >> work only with *code* blocks. > > You now have > > C-c C-F (`org-next-block') > C-c C-B (`org-previous-block') > > for navigating blocks. Would we get `F' and `B' as speed commands, for mirroring `C-c C-f' and `C-c C-b' (down to `f' and `b' as speed commands)? Best regards, Seb -- Sebastien Vauban ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: navigating between non-code blocks? 2013-02-08 16:47 ` Sebastien Vauban @ 2013-02-08 18:39 ` Bastien 0 siblings, 0 replies; 12+ messages in thread From: Bastien @ 2013-02-08 18:39 UTC (permalink / raw) To: Sebastien Vauban; +Cc: public-emacs-orgmode-mXXj517/zsQ "Sebastien Vauban" <wxhgmqzgwmuf-geNee64TY+gS+FvcfC7Uqw@public.gmane.org> writes: > Would we get `F' and `B' as speed commands, for mirroring `C-c C-f' and `C-c > C-b' (down to `f' and `b' as speed commands)? Done, thanks. -- Bastien ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: navigating between non-code blocks? 2013-02-08 16:11 ` Bastien 2013-02-08 16:47 ` Sebastien Vauban @ 2013-02-08 19:25 ` Bill White 2013-02-09 9:25 ` Bastien 2013-02-09 19:08 ` François Pinard 1 sibling, 2 replies; 12+ messages in thread From: Bill White @ 2013-02-08 19:25 UTC (permalink / raw) To: emacs-orgmode On Fri Feb 08 2013 at 10:11, Bastien <bzg@altern.org> wrote: > Hi Bill, > > Bill White <billw@wolfram.com> writes: > >> I sometimes have a lot of these in an org file and it would be handy >> to navigate among them easily. It seems that block navigation is set >> up to work only with *code* blocks. > > You now have > > C-c C-F (`org-next-block') > C-c C-B (`org-previous-block') > > for navigating blocks. > > Thanks for the suggestion! And thanks for implementing it. One small code problem, though - I think BLOCK-REGEXP should default to org-block-regexp. Otherwise, block-regexp isn't defined and the function just goes to the next org-babel-src-block-regexp (Sorry, I don't recall offhand how to set that up in elisp.) And, echoing Sebastien, `F' and `B' as speed commands would be very handy. Thanks! bw -- Bill White . billw@wolfram.com "No ma'am, we're musicians." ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: navigating between non-code blocks? 2013-02-08 19:25 ` Bill White @ 2013-02-09 9:25 ` Bastien 2013-02-09 19:08 ` François Pinard 1 sibling, 0 replies; 12+ messages in thread From: Bastien @ 2013-02-09 9:25 UTC (permalink / raw) To: Bill White; +Cc: emacs-orgmode Hi Bill, Bill White <billw@wolfram.com> writes: > And thanks for implementing it. One small code problem, though - I > think BLOCK-REGEXP should default to org-block-regexp. Otherwise, > block-regexp isn't defined and the function just goes to the next > org-babel-src-block-regexp Of course, I just push this change. > (Sorry, I don't recall offhand how to set that up in elisp.) > > And, echoing Sebastien, `F' and `B' as speed commands would be very > handy. Done! -- Bastien ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: navigating between non-code blocks? 2013-02-08 19:25 ` Bill White 2013-02-09 9:25 ` Bastien @ 2013-02-09 19:08 ` François Pinard 2013-02-09 20:58 ` Sebastien Vauban 1 sibling, 1 reply; 12+ messages in thread From: François Pinard @ 2013-02-09 19:08 UTC (permalink / raw) To: emacs-orgmode Bill White <billw@wolfram.com> writes: >> C-c C-F (`org-next-block') >> C-c C-B (`org-previous-block') > And, echoing Sebastien, `F' and `B' as speed commands would be very > handy. Bastien <bzg@altern.org> writes: > Of course, I just push this change. > Done! Hi, all. Quickly seeing this exchange, and realizing I do not understand what "speed commands" are, I decided to search for the expression in the Org manual, and did not find it. (This is after a "git pull", done earlier today.) Should I seek the concept under some other name? Within Emacs, `C-c C-f' is bound to org-next-block, while the manual, in the Motion node, says that `C-c C-f' is bound to org-forward-same-level. As for `C-c C-F' (really `C-c C-S-f'), it does not seem to be bound and fall back on `C-c C-f'. So, I'm a bit lost :-). Which is not a problem to me, as I was merely curious. Franĉois ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: navigating between non-code blocks? 2013-02-09 19:08 ` François Pinard @ 2013-02-09 20:58 ` Sebastien Vauban 2013-02-09 21:15 ` Sebastien Vauban 2013-02-09 23:58 ` François Pinard 0 siblings, 2 replies; 12+ messages in thread From: Sebastien Vauban @ 2013-02-09 20:58 UTC (permalink / raw) To: emacs-orgmode-mXXj517/zsQ Hi François, François Pinard wrote: > Bill White <billw-BUE4RdJlFM5BDgjK7y7TUQ@public.gmane.org> writes: > >>> C-c C-F (`org-next-block') >>> C-c C-B (`org-previous-block') > >> And, echoing Sebastien, `F' and `B' as speed commands would be very >> handy. > > Bastien <bzg-whniv8GeeGkdnm+yROfE0A@public.gmane.org> writes: > >> Of course, I just push this change. >> Done! > > Hi, all. > > Quickly seeing this exchange, and realizing I do not understand what > "speed commands" are, I decided to search for the expression in the Org > manual, and did not find it. (This is after a "git pull", done earlier > today.) Should I seek the concept under some other name? Yes, my bad; I should have said "speed keys". See the following: ;;** 15.3 (info "(org)Speed keys") Well, you know that since 25 Sep 2012 22:31; I remember an exchange on that with you: see http://comments.gmane.org/gmane.emacs.orgmode/60873. > Within Emacs, `C-c C-f' is bound to org-next-block, while the manual, in > the Motion node, says that `C-c C-f' is bound to org-forward-same-level. > As for `C-c C-F' (really `C-c C-S-f'), it does not seem to be bound and > fall back on `C-c C-f'. I'll test, and report. Best regards, Seb -- Sebastien Vauban ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: navigating between non-code blocks? 2013-02-09 20:58 ` Sebastien Vauban @ 2013-02-09 21:15 ` Sebastien Vauban 2013-02-11 13:21 ` Bastien 2013-02-09 23:58 ` François Pinard 1 sibling, 1 reply; 12+ messages in thread From: Sebastien Vauban @ 2013-02-09 21:15 UTC (permalink / raw) To: emacs-orgmode-mXXj517/zsQ Hi François, "Sebastien Vauban" wrote: > François Pinard wrote: >> Bastien <bzg-whniv8GeeGkdnm+yROfE0A@public.gmane.org> writes: >>> Bill White <billw-BUE4RdJlFM5BDgjK7y7TUQ@public.gmane.org> writes: >> >>> C-c C-F (`org-next-block') >>> C-c C-B (`org-previous-block') >>> >>>> And, echoing Sebastien, `F' and `B' as speed commands would be very >>>> handy. >>> >>> Of course, I just push this change. >>> Done! >> >> Within Emacs, `C-c C-f' is bound to org-next-block, while the manual, in >> the Motion node, says that `C-c C-f' is bound to org-forward-same-level. As >> for `C-c C-F' (really `C-c C-S-f'), it does not seem to be bound and fall >> back on `C-c C-f'. > > I'll test, and report. Indeed... ╭──── C-h k C-c C-S-f │ │ C-c C-f (translated from C-c C-S-f) runs the command org-next-block, which is │ an interactive Lisp function in `org.el'. │ │ It is bound to C-c C-f. │ │ (org-next-block ARG &optional BACKWARD BLOCK-REGEXP) │ │ Jump to the next block. ╰──── and ╭──── C-h k C-c C-f │ │ C-c C-f runs the command org-next-block, which is an interactive Lisp function │ in `org.el'. │ │ It is bound to C-c C-f. │ │ (org-next-block ARG &optional BACKWARD BLOCK-REGEXP) │ │ Jump to the next block. ╰──── So, C-c C-F does work on code blocks, but for a bad reason (C-c C-f, instead). And, don't know why, but the speed key `F' is not working for me, on a freshly pulled Org: Org-mode version 7.9.3e (7.9.3e-965-g16118a @ d:/Users/fni/Public/Repositories/org-mode/lisp/) Best regards, Seb -- Sebastien Vauban ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: navigating between non-code blocks? 2013-02-09 21:15 ` Sebastien Vauban @ 2013-02-11 13:21 ` Bastien 0 siblings, 0 replies; 12+ messages in thread From: Bastien @ 2013-02-11 13:21 UTC (permalink / raw) To: Sebastien Vauban; +Cc: public-emacs-orgmode-mXXj517/zsQ Hi Sébastien and François, "Sebastien Vauban" <wxhgmqzgwmuf-geNee64TY+gS+FvcfC7Uqw@public.gmane.org> writes: > Indeed... Fixed. > And, don't know why, but the speed key `F' is not working for me, on a freshly > pulled Org: Also fixed, thanks. -- Bastien ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: navigating between non-code blocks? 2013-02-09 20:58 ` Sebastien Vauban 2013-02-09 21:15 ` Sebastien Vauban @ 2013-02-09 23:58 ` François Pinard 2013-02-10 7:37 ` Sebastien Vauban 1 sibling, 1 reply; 12+ messages in thread From: François Pinard @ 2013-02-09 23:58 UTC (permalink / raw) To: emacs-orgmode "Sebastien Vauban" <wxhgmqzgwmuf-geNee64TY+gS+FvcfC7Uqw@public.gmane.org> writes: > ;;** 15.3 (info "(org)Speed keys") OK, got it now. I tried =?= as per the documentation suggests, and there is a great deal there indeed. > Well, you know that since 25 Sep 2012 22:31; I remember an exchange on that > with you: see http://comments.gmane.org/gmane.emacs.orgmode/60873. You surely have a lot of method for (apparently) easily finding this message! Yes, I remember this, but did not get at the time that the SPC at the beginning of a header was not an isolated feature, but part of a greater scheme. Thanks for your patience. François ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: navigating between non-code blocks? 2013-02-09 23:58 ` François Pinard @ 2013-02-10 7:37 ` Sebastien Vauban 0 siblings, 0 replies; 12+ messages in thread From: Sebastien Vauban @ 2013-02-10 7:37 UTC (permalink / raw) To: emacs-orgmode-mXXj517/zsQ Hi François, François Pinard wrote: > "Sebastien Vauban" writes: > >> ;;** 15.3 (info "(org)Speed keys") > > OK, got it now. I tried =?= as per the documentation suggests, and > there is a great deal there indeed. As well, M-x org-speed-command-help... Hé, that's from here the fact I'm talking of "speed commands". Maybe we could rename that one to "speed keys"... >> Well, you know that since 25 Sep 2012 22:31; I remember an exchange on that >> with you: see http://comments.gmane.org/gmane.emacs.orgmode/60873. > > You surely have a lot of method for (apparently) easily finding this > message! Yes, I remember this, but did not get at the time that the SPC at > the beginning of a header was not an isolated feature, but part of a greater > scheme. Just Google with our names, "org-mode" and "speed"... > Thanks for your patience. You're very welcome! Best regards, Seb -- Sebastien Vauban ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2013-02-11 14:57 UTC | newest] Thread overview: 12+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-01-15 20:50 navigating between non-code blocks? Bill White 2013-02-08 16:11 ` Bastien 2013-02-08 16:47 ` Sebastien Vauban 2013-02-08 18:39 ` Bastien 2013-02-08 19:25 ` Bill White 2013-02-09 9:25 ` Bastien 2013-02-09 19:08 ` François Pinard 2013-02-09 20:58 ` Sebastien Vauban 2013-02-09 21:15 ` Sebastien Vauban 2013-02-11 13:21 ` Bastien 2013-02-09 23:58 ` François Pinard 2013-02-10 7:37 ` Sebastien Vauban
Code repositories for project(s) associated with this external index https://git.savannah.gnu.org/cgit/emacs.git https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.