From: Eli Zaretskii <eliz@gnu.org>
To: Paul Eggert <eggert@cs.ucla.edu>
Cc: dmantipov@yandex.ru, emacs-devel@gnu.org
Subject: Re: Long lines and bidi
Date: Sat, 09 Feb 2013 12:01:46 +0200 [thread overview]
Message-ID: <83mwvd7qlx.fsf@gnu.org> (raw)
In-Reply-To: <5116113D.5070707@cs.ucla.edu>
> Date: Sat, 09 Feb 2013 01:05:01 -0800
> From: Paul Eggert <eggert@cs.ucla.edu>
> CC: dmantipov@yandex.ru, emacs-devel@gnu.org
>
> On 02/09/2013 12:46 AM, Eli Zaretskii wrote:
>
> > 25% faster is still terribly slow for redisplay.
>
> Yes, as I said, it doesn't solve the performance problem.
> Still, it doesn't complicate the code, and it significantly
> improves speed in code likely to be executed often, so it
> seems worth doing in its own right.
I suspect that the use case that makes scan_buffer so high on the
profile is very much skewed. My crystal ball says that the file in
question was one very long paragraph, or at least had many-many
_thousands_ of lines between empty lines that delimit paragraphs.
scan_buffer is high on the profile because the bidi.c code tries to
find the beginning of a paragraph, which determines the base direction
of the paragraph, which in turn determines how the text should be
reordered for display.
By contrast, most real-life files have much less text between empty
lines, so scan_buffer will not be at any prominent place in the
profile. But redisplay of a buffer with very long lines will still be
awfully slow, even if there's an empty line between every 2 long
lines, although scan_buffer will no longer be a factor.
OTOH, if you create a file with a single long paragraph, but whose
lines have "normal" width, like 100 characters, redisplay will perform
adequately, even though scan_buffer will be heavily used. (It would
be interesting to see a profile for that, btw.)
IOW, the solution in bidi.c for extremely long paragraphs is optimized
for the 99% of use cases, where lines are not too long, i.e. for those
cases where the old unidirectional display engine gave reasonable
performance. Dmitry's use case, OTOH, is skewed on several counts:
. it uses extremely long lines
. it uses too many neutral/weak characters
. it uses extremely long paragraphs
This simultaneously hits on several unrelated weaknesses of the
current display engine, with the result that the profile is a
combination of at least 3 different reasons for slow-down, which makes
it very hard to analyze the results and look for solutions.
That is why I think we should attack this problem one reason at a
time. The most important reason is the first one: long lines cause
the display code traverse too much of buffer text. This is why you
see x_produce_glyphs so high on the profile in the unidirectional
case: it examines too many characters, much more than what will be
actually displayed on the screen. Solve this problem, and the 2nd one
will simply disappear without a trace, because it is at least linear
in the number of scanned characters. If the 3rd problem is still a
factor, after the 1st one is gone, we can tune the current
optimization at that time.
next prev parent reply other threads:[~2013-02-09 10:01 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-03 22:05 bug#13623: 24.3.50; Redisplay issue with transient-mark-mode Lawrence Mitchell
2013-02-04 15:49 ` Eli Zaretskii
2013-02-04 17:20 ` Lawrence Mitchell
2013-02-04 18:10 ` Eli Zaretskii
2013-02-05 4:54 ` Dmitry Antipov
2013-02-05 12:07 ` Dmitry Antipov
2013-02-05 17:46 ` Eli Zaretskii
2013-02-05 17:45 ` Eli Zaretskii
2013-02-06 7:16 ` Dmitry Antipov
2013-02-06 14:31 ` Stefan Monnier
2013-02-06 15:14 ` Dmitry Antipov
2013-02-06 18:04 ` Eli Zaretskii
2013-02-06 18:23 ` Eli Zaretskii
2013-02-06 20:30 ` Stefan Monnier
2013-02-07 3:41 ` Eli Zaretskii
2013-02-08 13:33 ` Long lines and bidi [Was: Re: bug#13623: ...] Dmitry Antipov
2013-02-08 14:07 ` Eli Zaretskii
2013-02-08 14:46 ` Long lines and bidi Eli Zaretskii
2013-02-08 16:38 ` Dmitry Antipov
2013-02-08 16:52 ` Eli Zaretskii
2013-02-09 3:34 ` Paul Eggert
2013-02-09 8:46 ` Eli Zaretskii
2013-02-09 9:05 ` Paul Eggert
2013-02-09 9:33 ` Eli Zaretskii
2013-02-11 2:33 ` Paul Eggert
2013-02-09 10:01 ` Eli Zaretskii [this message]
2013-02-10 16:57 ` Eli Zaretskii
2013-02-11 5:43 ` Dmitry Antipov
2013-02-11 7:54 ` Dmitry Antipov
2013-02-11 16:47 ` Eli Zaretskii
2013-02-11 23:55 ` Paul Eggert
2013-02-11 16:42 ` Eli Zaretskii
2013-02-11 17:53 ` Dmitry Antipov
2013-02-11 18:10 ` Eli Zaretskii
2013-02-11 18:21 ` Dmitry Antipov
2013-02-11 17:17 ` Eli Zaretskii
2013-02-11 17:55 ` Drew Adams
2013-02-11 18:13 ` Eli Zaretskii
2013-02-08 16:21 ` Long lines and bidi [Was: Re: bug#13623: ...] Dmitry Antipov
2013-02-08 17:04 ` Eli Zaretskii
2013-02-08 15:33 ` Stefan Monnier
2013-02-08 16:05 ` Eli Zaretskii
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=83mwvd7qlx.fsf@gnu.org \
--to=eliz@gnu.org \
--cc=dmantipov@yandex.ru \
--cc=eggert@cs.ucla.edu \
--cc=emacs-devel@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.