* Error in post-command-hook (icomplete-post-command-hook): (void-function set-message-beep)
@ 2018-07-14 14:03 net june
2018-07-14 14:25 ` Eli Zaretskii
0 siblings, 1 reply; 6+ messages in thread
From: net june @ 2018-07-14 14:03 UTC (permalink / raw)
To: emacs-devel@gnu.org
I have sent a mail to bug-gnu-emacs@gnu.org. But I didn't receive a bug
number reply after 2 hours. So I re-send it here.
Emacs 26.1.50: Error in post-command-hook (icomplete-post-command-hook):
(void-function set-message-beep)
emacs: 26.1.50
OS: centos 7 x86_64
1. copy "w32-register-hot-key" to clipboard
2. emacs -Q
3. C-h f or M-x describe-function
4. use C-y to paste the content in clipboard to minibuffer, and press Enter
5. emacs error: Error in post-command-hook
(icomplete-post-command-hook): (void-function set-message-beep)
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error in post-command-hook (icomplete-post-command-hook): (void-function set-message-beep)
2018-07-14 14:03 Error in post-command-hook (icomplete-post-command-hook): (void-function set-message-beep) net june
@ 2018-07-14 14:25 ` Eli Zaretskii
2018-07-14 15:00 ` net june
0 siblings, 1 reply; 6+ messages in thread
From: Eli Zaretskii @ 2018-07-14 14:25 UTC (permalink / raw)
To: net june; +Cc: emacs-devel
> From: net june <netjune@outlook.com>
> Date: Sat, 14 Jul 2018 14:03:57 +0000
>
> Emacs 26.1.50: Error in post-command-hook (icomplete-post-command-hook):
> (void-function set-message-beep)
>
> emacs: 26.1.50
> OS: centos 7 x86_64
>
> 1. copy "w32-register-hot-key" to clipboard
> 2. emacs -Q
> 3. C-h f or M-x describe-function
> 4. use C-y to paste the content in clipboard to minibuffer, and press Enter
> 5. emacs error: Error in post-command-hook
> (icomplete-post-command-hook): (void-function set-message-beep)
I can't reproduce this. And since the error talks about icomplete, I
think you have somehow loaded and activated that package.
Also, where did you get this version of Emacs? Did you build it
yourself?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error in post-command-hook (icomplete-post-command-hook): (void-function set-message-beep)
2018-07-14 14:25 ` Eli Zaretskii
@ 2018-07-14 15:00 ` net june
2018-07-14 15:13 ` net june
0 siblings, 1 reply; 6+ messages in thread
From: net june @ 2018-07-14 15:00 UTC (permalink / raw)
To: Eli Zaretskii; +Cc: emacs-devel@gnu.org
On 07/14/2018 10:25 PM, Eli Zaretskii wrote:
> I can't reproduce this. And since the error talks about icomplete, I
> think you have somehow loaded and activated that package.
>
> Also, where did you get this version of Emacs? Did you build it
> yourself?
>
I built it using the emacs-26 branch (after 26.1 released) in emacs git
repo with no modification.
I see that set-message-beep and w32-register-hot-key are defined on
windows and is not available for GNU/Linux. Did you test it on
GNU/Linux? Maybe the problem only appears on GNU/Linux.
I'm using GNU/Linux(Centos 7).
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error in post-command-hook (icomplete-post-command-hook): (void-function set-message-beep)
2018-07-14 15:00 ` net june
@ 2018-07-14 15:13 ` net june
2018-07-14 15:47 ` Eli Zaretskii
0 siblings, 1 reply; 6+ messages in thread
From: net june @ 2018-07-14 15:13 UTC (permalink / raw)
To: emacs-devel@gnu.org
On 07/14/2018 11:00 PM, net june wrote:
>
>
> On 07/14/2018 10:25 PM, Eli Zaretskii wrote:
>
>> I can't reproduce this. And since the error talks about icomplete, I
>> think you have somehow loaded and activated that package.
>>
>> Also, where did you get this version of Emacs? Did you build it
>> yourself?
>>
>
> I built it using the emacs-26 branch (after 26.1 released) in emacs git
> repo with no modification.
>
> I see that set-message-beep and w32-register-hot-key are defined on
> windows and is not available for GNU/Linux. Did you test it on
> GNU/Linux? Maybe the problem only appears on GNU/Linux.
>
> I'm using GNU/Linux(Centos 7).
>
Also can be reproduced by following steps:
1. emacs -Q
2. C-h f or M-x describe-function
3. input "w32-<TAB>" where <TAB> is pressing the tab key
4. emacs error: byte-code: Symbol’s function definition is void:
set-message-beep
Note:
The error message is not right in the original mail. That error message
was copied from another emacs session( not "emacs -Q"). The error
message in this mail(in the step 4) is the right one. Sorry for the mistake.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error in post-command-hook (icomplete-post-command-hook): (void-function set-message-beep)
2018-07-14 15:13 ` net june
@ 2018-07-14 15:47 ` Eli Zaretskii
2018-07-15 3:48 ` net june
0 siblings, 1 reply; 6+ messages in thread
From: Eli Zaretskii @ 2018-07-14 15:47 UTC (permalink / raw)
To: net june; +Cc: emacs-devel
> From: net june <netjune@outlook.com>
> Date: Sat, 14 Jul 2018 15:13:14 +0000
>
> > I see that set-message-beep and w32-register-hot-key are defined on
> > windows and is not available for GNU/Linux. Did you test it on
> > GNU/Linux? Maybe the problem only appears on GNU/Linux.
> >
> > I'm using GNU/Linux(Centos 7).
I tried now in GNU/Linux, and I still cannot reproduce this.
> 1. emacs -Q
> 2. C-h f or M-x describe-function
> 3. input "w32-<TAB>" where <TAB> is pressing the tab key
> 4. emacs error: byte-code: Symbol’s function definition is void:
> set-message-beep
I get "No match" when I press TAB.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error in post-command-hook (icomplete-post-command-hook): (void-function set-message-beep)
2018-07-14 15:47 ` Eli Zaretskii
@ 2018-07-15 3:48 ` net june
0 siblings, 0 replies; 6+ messages in thread
From: net june @ 2018-07-15 3:48 UTC (permalink / raw)
To: Eli Zaretskii; +Cc: emacs-devel@gnu.org
This is the bug: 32157@debbugs.gnu.org
On 07/14/2018 11:47 PM, Eli Zaretskii wrote:
>> From: net june <netjune@outlook.com>
>> Date: Sat, 14 Jul 2018 15:13:14 +0000
>>
>>> I see that set-message-beep and w32-register-hot-key are defined on
>>> windows and is not available for GNU/Linux. Did you test it on
>>> GNU/Linux? Maybe the problem only appears on GNU/Linux.
>>>
>>> I'm using GNU/Linux(Centos 7).
>
> I tried now in GNU/Linux, and I still cannot reproduce this.
>
>> 1. emacs -Q
>> 2. C-h f or M-x describe-function
>> 3. input "w32-<TAB>" where <TAB> is pressing the tab key
>> 4. emacs error: byte-code: Symbol’s function definition is void:
>> set-message-beep
>
> I get "No match" when I press TAB.
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-07-15 3:48 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-07-14 14:03 Error in post-command-hook (icomplete-post-command-hook): (void-function set-message-beep) net june
2018-07-14 14:25 ` Eli Zaretskii
2018-07-14 15:00 ` net june
2018-07-14 15:13 ` net june
2018-07-14 15:47 ` Eli Zaretskii
2018-07-15 3:48 ` net june
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.