* New to org-capture (and org-remember)
@ 2010-07-01 15:28 Stephen Eglen
2010-07-01 15:31 ` Carsten Dominik
2010-07-01 15:50 ` Memnon Anon
0 siblings, 2 replies; 5+ messages in thread
From: Stephen Eglen @ 2010-07-01 15:28 UTC (permalink / raw)
To: emacs-orgmode; +Cc: Stephen Eglen
I'd like to try out org-capture.
I've never used org-remember before so I have no templates to convert.
Do I make the new ones in pretty much the same way as the manual
describes for org-remember?
Or should I be patient, and wait for org-capture to stabilise?
Thanks, Stephen
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: New to org-capture (and org-remember)
2010-07-01 15:28 New to org-capture (and org-remember) Stephen Eglen
@ 2010-07-01 15:31 ` Carsten Dominik
2010-07-01 15:50 ` Memnon Anon
1 sibling, 0 replies; 5+ messages in thread
From: Carsten Dominik @ 2010-07-01 15:31 UTC (permalink / raw)
To: Stephen Eglen; +Cc: emacs-orgmode
org-capture is going to be the future, so go for it.
Most things work well, except for the file+function and file+regexp
targets.
Yes, make them like the remember ones. Just call org-capture, and
press 'C' to get to the customize buffer.
If you have the git distribution, you can do
make doc/org.pdf
to get the new manual where the remember section has
already been replaced with one about capture.
- Carsten
On Jul 1, 2010, at 5:28 PM, Stephen Eglen wrote:
> I'd like to try out org-capture.
>
> I've never used org-remember before so I have no templates to convert.
> Do I make the new ones in pretty much the same way as the manual
> describes for org-remember?
>
> Or should I be patient, and wait for org-capture to stabilise?
>
> Thanks, Stephen
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
- Carsten
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: New to org-capture (and org-remember)
2010-07-01 15:28 New to org-capture (and org-remember) Stephen Eglen
2010-07-01 15:31 ` Carsten Dominik
@ 2010-07-01 15:50 ` Memnon Anon
2010-07-02 8:43 ` Stephen Eglen
1 sibling, 1 reply; 5+ messages in thread
From: Memnon Anon @ 2010-07-01 15:50 UTC (permalink / raw)
To: Stephen Eglen; +Cc: emacs-orgmode
Stephen Eglen <S.J.Eglen@damtp.cam.ac.uk> writes:
> I'd like to try out org-capture.
>
> I've never used org-remember before so I have no templates to convert.
> Do I make the new ones in pretty much the same way as the manual
> describes for org-remember?
>
> Or should I be patient, and wait for org-capture to stabilise?
Hi,
to quote the fine manual:
,----[ (info "(org)Capture templates") ]
| You can use templates to arrange for different types of capture items,
| and for different target locations. The easiest way to set up such
| templates is through the customize interface.
|
| `C-c c C'
| Customize the variable `org-capture-templates'.
`----
Is your documentation uptodate?
You should find all the information in "9.1 Capture" and its
subnodes to get you started.
Argh, org-capture.el is not part of the current stable release.
So, if you want to try, you need the development version, either
with git or download org-latest (link is on orgmode.org).
If you still encounter any problems, please describe them so the
documentation can be improved :).
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: New to org-capture (and org-remember)
2010-07-01 15:50 ` Memnon Anon
@ 2010-07-02 8:43 ` Stephen Eglen
2010-07-02 8:57 ` Carsten Dominik
0 siblings, 1 reply; 5+ messages in thread
From: Stephen Eglen @ 2010-07-02 8:43 UTC (permalink / raw)
To: Memnon Anon; +Cc: emacs-orgmode, Stephen Eglen
Memnon Anon <gegendosenfleisch@googlemail.com> wrote:
> Stephen Eglen <S.J.Eglen@damtp.cam.ac.uk> writes:
>
> > I'd like to try out org-capture.
> >
> > I've never used org-remember before so I have no templates to convert.
> > Do I make the new ones in pretty much the same way as the manual
> > describes for org-remember?
> >
> > Or should I be patient, and wait for org-capture to stabilise?
>
> Hi,
>
> to quote the fine manual:
>
> ,----[ (info "(org)Capture templates") ]
> | You can use templates to arrange for different types of capture items,
> | and for different target locations. The easiest way to set up such
> | templates is through the customize interface.
> |
> | `C-c c C'
> | Customize the variable `org-capture-templates'.
> `----
>
> Is your documentation uptodate?
>
> You should find all the information in "9.1 Capture" and its
> subnodes to get you started.
>
> Argh, org-capture.el is not part of the current stable release.
> So, if you want to try, you need the development version, either
> with git or download org-latest (link is on orgmode.org).
>
> If you still encounter any problems, please describe them so the
> documentation can be improved :).
Thanks for this. I have read the nice docs (and found some small typos
- will send a patch).
One thing immediately struck me: sec 9.1.1. mentions setting:
org-default-notes-file
but I couldn't see that mentioned in the rest of the chapter. Its
docstring would indicate its needed by remember.el, so perhaps there is
no need any more to set org-default-notes-file?
Stephen
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Re: New to org-capture (and org-remember)
2010-07-02 8:43 ` Stephen Eglen
@ 2010-07-02 8:57 ` Carsten Dominik
0 siblings, 0 replies; 5+ messages in thread
From: Carsten Dominik @ 2010-07-02 8:57 UTC (permalink / raw)
To: Stephen Eglen; +Cc: Memnon Anon, emacs-orgmode
Hi Stephen,
On Jul 2, 2010, at 10:43 AM, Stephen Eglen wrote:
> Memnon Anon <gegendosenfleisch@googlemail.com> wrote:
>
>> Stephen Eglen <S.J.Eglen@damtp.cam.ac.uk> writes:
>>
>>> I'd like to try out org-capture.
>>>
>>> I've never used org-remember before so I have no templates to
>>> convert.
>>> Do I make the new ones in pretty much the same way as the manual
>>> describes for org-remember?
>>>
>>> Or should I be patient, and wait for org-capture to stabilise?
>>
>> Hi,
>>
>> to quote the fine manual:
>>
>> ,----[ (info "(org)Capture templates") ]
>> | You can use templates to arrange for different types of capture
>> items,
>> | and for different target locations. The easiest way to set up such
>> | templates is through the customize interface.
>> |
>> | `C-c c C'
>> | Customize the variable `org-capture-templates'.
>> `----
>>
>> Is your documentation uptodate?
>>
>> You should find all the information in "9.1 Capture" and its
>> subnodes to get you started.
>>
>> Argh, org-capture.el is not part of the current stable release.
>> So, if you want to try, you need the development version, either
>> with git or download org-latest (link is on orgmode.org).
>>
>> If you still encounter any problems, please describe them so the
>> documentation can be improved :).
>
> Thanks for this. I have read the nice docs (and found some small
> typos
> - will send a patch).
Proofreading that section carefully would be much appreciated.
Also better wording etc. I am known as the worst typist in the world,
and I know that my English is reasonably good but not nearly perfect.
>
> One thing immediately struck me: sec 9.1.1. mentions setting:
> org-default-notes-file
> but I couldn't see that mentioned in the rest of the chapter. Its
> docstring would indicate its needed by remember.el, so perhaps there
> is
> no need any more to set org-default-notes-file?
I have just updated this docstring, thanks for noticing this.
This variable is not necessary, but it is used if you are too
lazy to give a target file in the template definition.
- Carsten
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2010-07-02 8:57 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-07-01 15:28 New to org-capture (and org-remember) Stephen Eglen
2010-07-01 15:31 ` Carsten Dominik
2010-07-01 15:50 ` Memnon Anon
2010-07-02 8:43 ` Stephen Eglen
2010-07-02 8:57 ` Carsten Dominik
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.