From: "Alan E. Davis" <lngndvs@gmail.com>
To: Carsten Dominik <carsten.dominik@gmail.com>
Cc: emacs-orgmode@gnu.org,
Nathaniel Cunningham <nathaniel.cunningham@gmail.com>
Subject: Re: searchable refcard?
Date: Mon, 1 Dec 2008 22:56:15 +1000 [thread overview]
Message-ID: <7bef1f890812010456i5c5a1542l8b2bdef7ca3e209c@mail.gmail.com> (raw)
In-Reply-To: <EBCDBA94-285D-458C-A6C0-AF4F6DDC3DAB@gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 931 bytes --]
That all is a great help. I like both ideas, but at the present it is much
easier for me to go through orgcard.tex and study the info docs. I think I
have some mistakes in this, but it's been an interesting study to carefully
comb through one or two headlines' worth (Agenda and clocking) and add
something for my own use on relative clocks.
It helps alot to study the info docs while going through this, but I cannot
do it all in one sitthing. Perhaps it's helpful to separate some of the
commands where three variants are on one line to save space---it sure helps
me to make sense of each of them.
I might ask, in cases where there is a discrepancy between the orgcard and
the info docs, which one is up to date? My guess would be the info docs,
but I'm guessing.
Attached is another pass at "org-help.org".
Alan
--
Alan Davis
"It's never a matter of liking or disliking ..."
---Santa Ynez Chumash Medicine Man
[-- Attachment #1.2: Type: text/html, Size: 1130 bytes --]
[-- Attachment #2: org-help.org --]
[-- Type: application/octet-stream, Size: 17255 bytes --]
# org-help.org *-* mode: org -*-
# 01 December 2008
#+STARTUP: overview
* Visibility Cycling
rotate current subtree between states TAB
rotate entire buffer between states S-TAB
restore property-dependent startup visibility C-u C-u TAB
show the whole file, including drawers C-u C-u C-u TAB
reveal context around point C-c C-r
* Motion
next/previous heading C-c C-n/p
next/previous heading, same level C-c C-f/b
backward to higher level heading C-c C-u
jump to another place in document C-c C-j
previous/next plain list item S-UP/DOWN^3
* Structure Editing
insert new heading/item at current level M-RET
insert new heading after subtree C-RET
insert new TODO entry/checkbox item M-S-RET
insert TODO entry/ckbx after subtree C-S-RET
promote/demote heading M-LEFT/RIGHT
promote/demote current subtree M-S-LEFT/RIGHT
move subtree/list item up/down M-S-UP/DOWN
refile subtree C-c C-w
kill subtree C-c C-x C-w
copy subtree C-c C-x M-w
yank subtree C-c C-x C-y or C-y
narrow buffer to current subtree C-x n s
widen restriction to full buffer C-x n w
* Archiving
toggle ARCHIVE tag C-c C-x a
force cycling of an ARCHIVEd tree C-TAB
move to Attic Sibling C-c C-x A
move subtree to archive file C-c C-x C-s
* Filtering and Sparse Trees
construct a sparse tree by various criteria C-c /
view TODO's in sparse tree C-c C-v
global TODO list in agenda mode C-c a t^1
time sorted view of current org file C-c a L
* Tables
** Creating a table
just start typing, e.g. |Name|Phone|Age RET |- TAB
convert region to table C-c |
... separator at least 3 spaces C-3 C-c |
** Commands available inside tables
The following commands work when the cursor is inside a table .
Outside of tables, the same keys may have other functionality.
*** Re-aligning and field motion
re-align the table without moving the cursor C-c C-c
re-align the table, move to next field TAB
move to previous field S-TAB
re-align the table, move to next row RET
*** Row and column editing
move the current column left M-LEFT/RIGHT
kill the current column M-S-LEFT
insert new column to left of cursor position M-S-RIGHT
move the current row up/down M-UP/DOWN
kill the current row or horizontal line M-S-UP
insert new row above the current row M-S-DOWN
insert hline below (C-u : above) current row C-c -
sort lines in region C-c
*** Regions
cut rectangular region C-c C-x C-w
copy rectangular region C-c C-x M-w
paste rectangular region C-c C-x C-y
fill paragraph across selected cells C-c C-q
*** Miscellaneous
to limit column width to N characters, use ...| <N> |...
edit the current field in a separate window C-c `
make current field fully visible C-u TAB
export as tab-separated file M-x org-table-export
import tab-separated file M-x org-table-import
sum numbers in current column/rectangle C-c +
*** Tables created with the table.el package
insert a new table.eltable C-c
recognize existing table.el table C-c C-c
convert table (Org-mode table.el) C-c
*** Spreadsheet
Formulas typed in field are executed by TAB, RET, and C-c C-c .
= introduces a column formula
:= introduced a field formula
**** Example
Example: Add Col1 and Col2 |=$1+$2 |
... with printf format specification |=$1+$2;%.2f|
... with constants from constants.el |=$1/$c/$cm |
sum from 2nd to 3rd hline |:=vsum(@II..@III)|
apply current column formula | = |
set and eval column formula C-c =
set and eval field formula C-u C-c =
re-apply all stored equations to current line C-c *
re-apply all stored equations to entire table C-u C-c *
iterate table to stability C-u C-u C-c *
rotate calculation mark through # * ! _ $ C-#
show line, column, formula reference C-c ?
toggle coordinate grid C-c }
toggle formula debugger C-c {
*** Formula Editor
edit formulas in separate buffer C-c '
exit and install new formulas C-c C-c
exit, install, and apply new formulas C-u C-c C-c
abort C-c C-q
toggle reference style C-c C-r
pretty-print Lisp formula TAB
complete Lisp symbol M-TAB
shift reference point S-cursor
shift test line for column references M-up/down
scroll the window showing the table M-S-up/down
toggle table coordinate grid C-c }
* Links
globally store link to the current location C-c l^1
insert a link (TAB completes stored links) C-c C-l
insert file link with file name completion C-u C-c C-l
edit (also hidden part of) link at point C-c C-l
open file links in emacs C-c C-o
...force open in emacs/other window C-u C-c C-o
open link at point mouse-1/2
...force open in emacs/other window mouse-3
record a position in mark ring C-c %
jump back to last followed link(s) C-c &
find next link C-c C-x C-n
find previous link C-c C-x C-p
edit code snippet of file at point C-c '
** Internal Links
<<My Target>> target
<<<My Target>>> radio target^2
[[*this text]] find headline
[[this text]] find target or text in buffer
[[this text][description]] optional link text
** External Links
file:/home/dominik/img/mars.jpg file, absolute
file:papers/last.pdf file, relative
file:projects.org::*that text find headline
file:projects.org::find me find trgt/string
http://www.astro.uva.nl/ dominik on the web
mailto:adent@galaxy.net Email address
news:comp.emacs Usenet group
bbdb:Richard Stallman BBDB person
gnus:group GNUS group
gnus:group#id GNUS message
vm|wl|mhe|rmail:folder Mail folder
vm|wl|mhe|rmail:folder#id Mail message
info:emacs:Regexps Info file:node
shell:ls *.org shell command
elisp:(calendar) elisp form
[[external link][description]] optional link text
* Completion
In-buffer completion completes TODO keywords at headlinestart,
TeX macros after "\"
option keywords after "#-"
TAGS after ":"
and dictionary words elsewhere.
Complete word at point M-TAB
* TODO Items and Checkboxes
rotate the state of the current item C-c C-t
select next/previous state S-LEFT/RIGHT
select next/previous set C-S-LEFT/RIGHT
view TODO items in a sparse tree C-c C-v
view 3rd TODO keyword's sparse tree C-3 C-c C-v
set the priority of the current item C-c , [ABC]
remove priority cookie from current item C-c , SPC
raise/lower priority of current item S-UP/DOWN^3
insert new checkbox item in plain list M-S-RET
toggle checkbox(es) in region/entry/at point C-c C-x C-b
toggle checkbox at point C-c C-c
checkbox statistics cookies: insert [/] or [%]
update checkbox statistics (C-u : whole file) C-c #
* Tags
set tags for current heading C-c C-q
realign tags in all headings C-u C-c C-q
create sparse tree with matching tags C-c
globally (agenda) match tags at cursor C-c C-o
** Properties and Column View
set property C-c C-x p
special commands in property lines C-c C-c
next/previous allowed value S-left/right
turn on column view C-c C-x C-c
capture columns view in dynamic block C-c C-x i
quit column view q
next/previous allowed value S-left/right
next/previous allowed value n / p
edit value e
edit allowed values list a
show value v
make column wider/narrower > / <
move column left/right M-left/right
add new column M-S-right
Delete current column M-S-left
* Timestamps
prompt for date and insert timestamp C-c .
like C-c . but insert date and time format C-u C-c .
Like C-c . but make stamp inactive C-c !
insert DEADLINE timestamp C-c C-d
insert SCHEDULED timestamp C-c C-s
create sparse tree with all deadlines due C-c / d
the time between 2 dates in a time range C-c C-y
change timestamp at cursor by 1 day S-RIGHT/LEFT
change year/month/day at cursor by 1 S-UP/DOWN
access the calendar for the current date C-c >
insert timestamp matching date in calendar C-c <
access agenda for current date C-c C-o
Select date while prompted mouse-1/RET
Toggle custom format display for dates/times C-c C-x C-t
** Clocking time
start clock on current item C-c C-x C-i
stop clock on current item C-c C-x C-o
cancel current clock C-c C-x C-x
display total subtree times C-c C-x C-d
remove displayed times C-c C-c
insert/update table with clock report C-c C-x C-r
** Relative time clock (Elapsed Time)
insert a relative time into the buffer C-c C-x .
the first time the timer is started
reset relative time to Zero C-u C-c C-x .
insert a description list item with time C-c C-x -
with prefix set to zero C-u C-c C-x -
reset timer without inserting anything C-c C-x 0
- by default, set timer to 0
- with C-u prefix, set to a specific offset C-u C-c C-x 0
(user prompted for offset, default at point)
- with C-c C-u prefix, change all times in region
by a given offset C-c C-u C-c C-x 0
* Agenda Views
** Agenda Files
The variable 'org-agenda-files' may be maintained through the following
commands:
add/move current file to front of agenda C-c [
remove current file from your agenda C-c ]
cycle through agenda file list C-, / C-'
set/remove restriction lock 5 C-c C-x </>
** The Agenda Dispatcher
(assuming C-c a is the Agenda Dispatcher, the following are
suggested bindings)
compile agenda for the current week C-c a a
compile global TODO list C-c a t
compile TODO list for specific keyword C-c a T
match tags, TODO kwds, properties C-c a m
match only in TODO entries C-c a M
find stuck projects C-c a #
show timeline view of current org file C-c a L
(time-sorted view)
configure custom commands C-c a C
agenda for date at cursor C-c C-o
*** Keyword search
boolean search by keyword of files C-c a s
(searches all files in `org-agenda-text-search-extra-files')
** Commands available in an agenda buffer
*** View Org file
show original location of item SPC/mouse-3
show and recenter window L
goto original location in other window TAB/mouse-2
goto original location, delete other windows RET
show subtree in indirect buffer, ded. frame b
toggle follow-mode f
*** Change display
delete other windows o
switch to day/week/month/year view d w m y
toggle inclusion of diary entries D
toggle time grid for daily schedule G
toggle display of logbook entries l
toggle inclusion of archived trees/files v / C-u v
refresh agenda buffer with any changes r / g
filter with repect to a tag /
save all org-mode buffers s
display next/previous day,week,... RIGHT/LEFT
goto today .
*** Remote editing
You are not allowed to edit the agenda buffer itself, but
you may use the following commands to show and jump to the
original entry and edit it "remotely":
undo a change due to remote editing C-_
digit argument 0-9
change state of current TODO item t
kill item and source C-k
toggle archive tag for headline a
move subtree to _Archive Sibling_ A
archive the subtree of headline $
(to configured archive location---?file)
show tags of current headline T
(including inherited tags)
set tags for current headline/region :
set priority of current item p / ','
raise priority of current item S-UP/DOWN / +
lower priority of current item S-DOWN / -
display weighted priority of current item P
dispatcher for attachment commands C-c C-a
schedule this item C-c C-s
set deadline for this item C-c C-d
change timestamp to one day earlier/later S-LEFT/RIGHT^3
change timestamp to today >
insert new entry into diary i
**** Agenda Actions for selected items
Dispatcher for agenda actions k
mark entry at point for action a
set deadline to date at point d
schedule to date at point s
call remember, cursor date as default r
Press 'r' afterward to see effect of action
**** Clock actions
start the clock on current item I
stop the clock on current item O
cancel the clock on current item X
jump to running clock entry, other window J
*** Misc
Open link in current line C-c C-o
*** Calendar commands
find agenda cursor date in calendar c
compute agenda for calendar cursor date c
show phases of the moon M
show sunrise/sunset times S
show holidays H
convert date to other calendars C
*** Quit and Exit
quit agenda, remove agenda buffer q
exit agenda, remove all agenda buffers x
* Calendar and Diary Integration
Include Emacs diary entries into Org-mode agenda with:
(setq org-agenda-include-diary t)
* LaTeX and cdlatex-mode
preview LaTeX fragment C-c C-x C-l
Expand abbreviation (cdlatex-mode) TAB
Insert/modify math symbol (cdlatex-mode) ` / '
* Exporting and Publishing
Exporting creates files with extensions .txt and .html
in the current directory. Publishing puts the resulting file
into some other place.
export/publish dispatcher C-c C-e
export visible part only C-c C-e v
insert template of export options C-c C-x t
toggle fixed width for entry or region C-c :
** Comments: Text not being exported
Text before the first headline is not considered part of the
document and is therefore never exported.
Lines starting with # are comments and are not exported.
Subtrees whose header starts with COMMENT are never exported.
toggle COMMENT keyword on entry C-c ;
** Dynamic Blocks
update dynamic block at point C-c C-x C-u
update all dynamic blocks C-u C-c C-x C-u
[-- Attachment #3: Type: text/plain, Size: 204 bytes --]
_______________________________________________
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
next prev parent reply other threads:[~2008-12-01 12:56 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-27 1:21 searchable refcard? Nathaniel Cunningham
2008-11-27 10:07 ` Sebastian Rose
2008-11-27 12:17 ` Alan E. Davis
2008-11-27 15:55 ` Carsten Dominik
2008-11-28 2:44 ` Alan E. Davis
2008-11-30 8:54 ` Carsten Dominik
2008-12-01 12:56 ` Alan E. Davis [this message]
2008-12-01 13:06 ` Carsten Dominik
2008-12-01 14:38 ` Sebastian Rose
2008-12-02 8:33 ` Carsten Dominik
2008-12-02 12:28 ` Sebastian Rose
2008-12-02 13:01 ` Carsten Dominik
2008-12-02 14:35 ` Sebastian Rose
2008-11-28 7:06 ` Nathaniel Cunningham
2008-12-03 20:40 ` Samuel Wales
2008-12-04 8:10 ` Carsten Dominik
2008-12-11 3:42 ` Samuel Wales
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7bef1f890812010456i5c5a1542l8b2bdef7ca3e209c@mail.gmail.com \
--to=lngndvs@gmail.com \
--cc=carsten.dominik@gmail.com \
--cc=emacs-orgmode@gnu.org \
--cc=nathaniel.cunningham@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.