* Exporting #+lob
@ 2010-10-17 5:59 Thomas S. Dye
2010-10-17 18:22 ` Eric Schulte
0 siblings, 1 reply; 6+ messages in thread
From: Thomas S. Dye @ 2010-10-17 5:59 UTC (permalink / raw)
To: emacs-orgmode Mailinglist
Aloha all,
This bit of an Org-mode buffer:
#+begin_example
#+lob: elispgantt(table=gantttesttable) :results output latex
#+end_example
is exported to LaTeX like this:
\begin{lstlisting}
: elispgantt(table=gantttesttable)
\end{lstlisting}
How can I get the header arguments (:results output latex) into the
LaTeX output?
All the best,
Tom
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Exporting #+lob 2010-10-17 5:59 Exporting #+lob Thomas S. Dye @ 2010-10-17 18:22 ` Eric Schulte 2010-10-17 19:34 ` Thomas S. Dye 2010-10-17 19:45 ` Thomas S. Dye 0 siblings, 2 replies; 6+ messages in thread From: Eric Schulte @ 2010-10-17 18:22 UTC (permalink / raw) To: Thomas S. Dye; +Cc: emacs-orgmode Mailinglist This looks like a bug, the export of lob lines needs to be better about recognizing if it is inside of a protected environment. Thanks for pointing this out. In the mean time the following syntax should work... : #+lob: elispgantt(table=gantttesttable) :results output latex Best -- Eric BTW: Do you still intend to add the elispgantt code to the library of babel distributed with Org-mode? If so I'm happy to handle the commit if you send me the code or a patch. "Thomas S. Dye" <tsd@tsdye.com> writes: > Aloha all, > > This bit of an Org-mode buffer: > > #+begin_example > #+lob: elispgantt(table=gantttesttable) :results output latex > #+end_example > > is exported to LaTeX like this: > > \begin{lstlisting} > : elispgantt(table=gantttesttable) > \end{lstlisting} > > How can I get the header arguments (:results output latex) into the > LaTeX output? > > All the best, > Tom > > _______________________________________________ > Emacs-orgmode mailing list > Please use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Exporting #+lob 2010-10-17 18:22 ` Eric Schulte @ 2010-10-17 19:34 ` Thomas S. Dye 2010-10-17 19:45 ` Thomas S. Dye 1 sibling, 0 replies; 6+ messages in thread From: Thomas S. Dye @ 2010-10-17 19:34 UTC (permalink / raw) To: Eric Schulte; +Cc: emacs-orgmode Mailinglist Hi Eric, I'm not sure it's a bug. It works on Eric Fraga's installation. Perhaps I have something set up incorrectly. The following approach works on my installation, so I haven't taken the time to chase down the problem I'm having with exporting # +begin_example ... #+end_example. #+begin_src org :exports code ,#+lob: elispgantt(table=gantttesttable) :results output latex #+end_src Let me know if you want me to investigate further. Thanks for your help, Tom On Oct 17, 2010, at 8:22 AM, Eric Schulte wrote: > This looks like a bug, the export of lob lines needs to be better > about > recognizing if it is inside of a protected environment. Thanks for > pointing this out. > > In the mean time the following syntax should work... > : #+lob: elispgantt(table=gantttesttable) :results output latex > > Best -- Eric > > BTW: Do you still intend to add the elispgantt code to the library of > babel distributed with Org-mode? If so I'm happy to handle the > commit if you send me the code or a patch. > > "Thomas S. Dye" <tsd@tsdye.com> writes: > >> Aloha all, >> >> This bit of an Org-mode buffer: >> >> #+begin_example >> #+lob: elispgantt(table=gantttesttable) :results output latex >> #+end_example >> >> is exported to LaTeX like this: >> >> \begin{lstlisting} >> : elispgantt(table=gantttesttable) >> \end{lstlisting} >> >> How can I get the header arguments (:results output latex) into the >> LaTeX output? >> >> All the best, >> Tom >> >> _______________________________________________ >> Emacs-orgmode mailing list >> Please use `Reply All' to send replies to the list. >> Emacs-orgmode@gnu.org >> http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Exporting #+lob 2010-10-17 18:22 ` Eric Schulte 2010-10-17 19:34 ` Thomas S. Dye @ 2010-10-17 19:45 ` Thomas S. Dye 2010-10-17 21:25 ` Eric Schulte 1 sibling, 1 reply; 6+ messages in thread From: Thomas S. Dye @ 2010-10-17 19:45 UTC (permalink / raw) To: Eric Schulte; +Cc: emacs-orgmode Mailinglist [-- Attachment #1.1: Type: text/plain, Size: 1310 bytes --] Hi Eric, Thanks for asking about the Library of Babel. I'm still figuring out the best way to use it and welcome your advice. Here is the approach I've drafted. Do you think this is a reasonable way to go? > The GANTT Emacs lisp code can either be placed in the buffer with the > GANTT chart table or it can be installed in the [[http://orgmode.org/manual/Library-of-Babel.html#Library-of-Babel > ][Library of Babel]]. > Installing local code in the Library of Babel is best accomplished by > establishing one or more Org-mode files for this purpose and keeping > them in a place that won't be overwritten when Org-mode is updated. > For each of these local files, place a line like the following in > =.emacs= to make the source code blocks accessible to the Library: > > #+source: load-local-lob > #+begin_src emacs-lisp :exports code > (org-babel-lob-ingest "~/org/local-lob.org") > #+end_src If this is off the mark, and the code should go in the main Library, then I'd want to check with Eric F. first about the changes I made. All the best, Tom On Oct 17, 2010, at 8:22 AM, Eric Schulte wrote: > BTW: Do you still intend to add the elispgantt code to the library of > babel distributed with Org-mode? If so I'm happy to handle the > commit if you send me the code or a patch. [-- Attachment #1.2: Type: text/html, Size: 2652 bytes --] [-- Attachment #2: Type: text/plain, Size: 201 bytes --] _______________________________________________ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Exporting #+lob 2010-10-17 19:45 ` Thomas S. Dye @ 2010-10-17 21:25 ` Eric Schulte 2010-10-17 22:17 ` Thomas S. Dye 0 siblings, 1 reply; 6+ messages in thread From: Eric Schulte @ 2010-10-17 21:25 UTC (permalink / raw) To: Thomas S. Dye; +Cc: emacs-orgmode Mailinglist Hi Tom, I think this code should live in the main library-of-babel.org file. I don't see any reason why it would be overwritten in that file, and that way it will be available by default for anyone who already loads the library of babel. Best -- Eric "Thomas S. Dye" <tsd@tsdye.com> writes: > Hi Eric, > > Thanks for asking about the Library of Babel. I'm still figuring out > the best way to use it and welcome your advice. > > Here is the approach I've drafted. Do you think this is a reasonable > way to go? > >> The GANTT Emacs lisp code can either be placed in the buffer with the >> GANTT chart table or it can be installed in the >> [[http://orgmode.org/manual/Library-of-Babel.html#Library-of-Babel >> ][Library of Babel]]. >> Installing local code in the Library of Babel is best accomplished by >> establishing one or more Org-mode files for this purpose and keeping >> them in a place that won't be overwritten when Org-mode is updated. >> For each of these local files, place a line like the following in >> =.emacs= to make the source code blocks accessible to the Library: >> >> #+source: load-local-lob >> #+begin_src emacs-lisp :exports code >> (org-babel-lob-ingest "~/org/local-lob.org") >> #+end_src > > If this is off the mark, and the code should go in the main Library, > then I'd want to check with Eric F. first about the changes I made. > > All the best, > Tom > > On Oct 17, 2010, at 8:22 AM, Eric Schulte wrote: > >> BTW: Do you still intend to add the elispgantt code to the library of >> babel distributed with Org-mode? If so I'm happy to handle the >> commit if you send me the code or a patch. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Exporting #+lob 2010-10-17 21:25 ` Eric Schulte @ 2010-10-17 22:17 ` Thomas S. Dye 0 siblings, 0 replies; 6+ messages in thread From: Thomas S. Dye @ 2010-10-17 22:17 UTC (permalink / raw) To: Eric Schulte; +Cc: emacs-orgmode Mailinglist [-- Attachment #1.1: Type: text/plain, Size: 2962 bytes --] Aloha Eric Fraga, Is it OK with you to put a modified version of the emacs-lisp code for LaTeX GANTT charts in the Library of Babel? I agree with Eric S. (see below) that this would be the best location for it in the context of org-article.cls. You can see my version of your code here: http://orgmode.org/worg/org-contrib/babel/examples/article-class.php#sec-3_4_5_1 My changes to your code were minor. 1) I've taken off the header arguments. AFAICT, header arguments in the Library of Babel aren't used as the defaults when the function is called, so there is no reason to have them there in this context. 2) I've taken out the code that generates #+begin_latex and # +end_latex. This makes it possible to use the function in the Org- mode buffer: #+lob: elispgantt(table=gantttesttable) :results output latex and also within a LaTeX source code block: #+lob: elispgantt(table=gantttesttable) :results output raw Thanks very much for the useful code, BTW. We're writing an annotated bibliography of Hawaiian history at work and I'm pretty sure we can use a GANTT chart to show a timeline of historians over the last century and a half. All the best, Tom On Oct 17, 2010, at 11:25 AM, Eric Schulte wrote: > Hi Tom, > > I think this code should live in the main library-of-babel.org > file. I > don't see any reason why it would be overwritten in that file, and > that > way it will be available by default for anyone who already loads the > library of babel. > > Best -- Eric > > "Thomas S. Dye" <tsd@tsdye.com> writes: > >> Hi Eric, >> >> Thanks for asking about the Library of Babel. I'm still figuring out >> the best way to use it and welcome your advice. >> >> Here is the approach I've drafted. Do you think this is a reasonable >> way to go? >> >>> The GANTT Emacs lisp code can either be placed in the buffer with >>> the >>> GANTT chart table or it can be installed in the >>> [[http://orgmode.org/manual/Library-of-Babel.html#Library-of-Babel >>> ][Library of Babel]]. >>> Installing local code in the Library of Babel is best accomplished >>> by >>> establishing one or more Org-mode files for this purpose and keeping >>> them in a place that won't be overwritten when Org-mode is updated. >>> For each of these local files, place a line like the following in >>> =.emacs= to make the source code blocks accessible to the Library: >>> >>> #+source: load-local-lob >>> #+begin_src emacs-lisp :exports code >>> (org-babel-lob-ingest "~/org/local-lob.org") >>> #+end_src >> >> If this is off the mark, and the code should go in the main Library, >> then I'd want to check with Eric F. first about the changes I made. >> >> All the best, >> Tom >> >> On Oct 17, 2010, at 8:22 AM, Eric Schulte wrote: >> >>> BTW: Do you still intend to add the elispgantt code to the library >>> of >>> babel distributed with Org-mode? If so I'm happy to handle the >>> commit if you send me the code or a patch. [-- Attachment #1.2: Type: text/html, Size: 5888 bytes --] [-- Attachment #2: Type: text/plain, Size: 201 bytes --] _______________________________________________ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-10-17 22:17 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-10-17 5:59 Exporting #+lob Thomas S. Dye 2010-10-17 18:22 ` Eric Schulte 2010-10-17 19:34 ` Thomas S. Dye 2010-10-17 19:45 ` Thomas S. Dye 2010-10-17 21:25 ` Eric Schulte 2010-10-17 22:17 ` Thomas S. Dye
Code repositories for project(s) associated with this external index https://git.savannah.gnu.org/cgit/emacs.git https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.