* Re: Kedit-like ALL command for emacs [not found] <mailman.3.1301413811.27153.help-gnu-emacs@gnu.org> @ 2011-03-30 8:56 ` Marc Mientki 2011-03-30 11:53 ` Tom [not found] ` <mailman.6.1301486023.6119.help-gnu-emacs@gnu.org> 0 siblings, 2 replies; 8+ messages in thread From: Marc Mientki @ 2011-03-30 8:56 UTC (permalink / raw) To: help-gnu-emacs Am 29.03.2011 17:42, schrieb Tom: > Do you know a package which implements the KEDIT ALL command for Emacs? > > http://www.kedit.com/hint_all.html ftp://ftp.dina.kvl.dk/pub/Staff/Per.Abrahamsen/auctex/all.el Maybe? HTH regards Marc ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Kedit-like ALL command for emacs 2011-03-30 8:56 ` Kedit-like ALL command for emacs Marc Mientki @ 2011-03-30 11:53 ` Tom [not found] ` <mailman.6.1301486023.6119.help-gnu-emacs@gnu.org> 1 sibling, 0 replies; 8+ messages in thread From: Tom @ 2011-03-30 11:53 UTC (permalink / raw) To: help-gnu-emacs Marc Mientki <no <at> no.com> writes: > > Am 29.03.2011 17:42, schrieb Tom: > > Do you know a package which implements the KEDIT ALL command for Emacs? > > > > http://www.kedit.com/hint_all.html > > ftp://ftp.dina.kvl.dk/pub/Staff/Per.Abrahamsen/auctex/all.el > Maybe? > Looks good. Thanks. I wonder why it is not part of the Emacs distribution. Seems like a useful package. ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <mailman.6.1301486023.6119.help-gnu-emacs@gnu.org>]
* Re: Kedit-like ALL command for emacs [not found] ` <mailman.6.1301486023.6119.help-gnu-emacs@gnu.org> @ 2011-04-07 15:48 ` brian powell 2011-04-08 18:06 ` Jambunathan K 0 siblings, 1 reply; 8+ messages in thread From: brian powell @ 2011-04-07 15:48 UTC (permalink / raw) To: help-gnu-emacs After reviewing what KEDIT ALL is; it seems to me all you want to do is--in an EMACS buffer--regardless of the version or type of EMACS: Mx list-matching-lines On Mar 30, 7:53 am, Tom <adatgyu...@gmail.com> wrote: > Marc Mientki <no <at> no.com> writes: > > > > > Am 29.03.2011 17:42, schrieb Tom: > > > Do you know a package which implements the KEDIT ALL command for Emacs? > > > >http://www.kedit.com/hint_all.html > > >ftp://ftp.dina.kvl.dk/pub/Staff/Per.Abrahamsen/auctex/all.el > > Maybe? > > Looks good. Thanks. > > I wonder why it is not part of the Emacs distribution. Seems like a > useful package. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Kedit-like ALL command for emacs 2011-04-07 15:48 ` brian powell @ 2011-04-08 18:06 ` Jambunathan K [not found] ` <BANLkTindCwtENejh7mqTgTET7f+pKsd4yQ@mail.gmail.com> 2011-04-09 16:53 ` Tom 0 siblings, 2 replies; 8+ messages in thread From: Jambunathan K @ 2011-04-08 18:06 UTC (permalink / raw) To: brian powell; +Cc: help-gnu-emacs brian powell <briangpowellms@gmail.com> writes: > After reviewing what KEDIT ALL is; it seems to me all you want to do > is--in an EMACS buffer--regardless of the version or type of EMACS: > > Mx list-matching-lines > I haven't used KEDIT. I did try out all.el. Within the occur-like buffer that all.el pops up, one can edit the matches and have the replacements propagated to the searched buffers. But list-matching-lines pops up a read-only buffer. Also the last line of the docstring says `In any case the searched buffers are not modified'. I think OP wanted something where the searched buffers are modified from within the occur buffer. Jambunathan K. > On Mar 30, 7:53 am, Tom <adatgyu...@gmail.com> wrote: >> Marc Mientki <no <at> no.com> writes: >> >> >> >> > Am 29.03.2011 17:42, schrieb Tom: >> > > Do you know a package which implements the KEDIT ALL command for Emacs? >> >> > >http://www.kedit.com/hint_all.html >> >> >ftp://ftp.dina.kvl.dk/pub/Staff/Per.Abrahamsen/auctex/all.el >> > Maybe? >> >> Looks good. Thanks. >> >> I wonder why it is not part of the Emacs distribution. Seems like a >> useful package. > > -- ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <BANLkTindCwtENejh7mqTgTET7f+pKsd4yQ@mail.gmail.com>]
* Fwd: Kedit-like ALL command for emacs [not found] ` <BANLkTindCwtENejh7mqTgTET7f+pKsd4yQ@mail.gmail.com> @ 2011-04-08 19:27 ` brian powell 0 siblings, 0 replies; 8+ messages in thread From: brian powell @ 2011-04-08 19:27 UTC (permalink / raw) To: emacs-orgmode Well, if that is what he wanted; then, suggest one of these: Mx query-replace and/or Mx query-replace-regexp --EMACS has the best/fastest regexp engine available for doing an Mx query-replace-regexp Because ELISP has a lot of functions optimized for editing files, using multiple buffers, windows, etc. The regexp engine is optimized for "first-character-matching"; i.e. quickly finding and highlighting and replacing characters in a buffer--faster than anything else, last time I checked. Suggest using QEMACS if you want to edit multigigabyte files. Also, to use an occur buffer (which you seem to refer to below) all you would do there would be: Mx occur Then go to the *Occur* buffer where it shows the matching regexp in highlighted text and then LeftMouse on the line (anywhere on the line) and the line will pop up in the other window. Also, there is a way to edit every file in the set of a regexp in a directory tree (a top-level directory and all of its subdirectories) that contains a regexp--one replacement at a time: ** "Occur mode changes: *** The new command `multi-occur' is just like `occur', except it can search multiple buffers. There is also a new command `multi-occur-in-matching-buffers' which allows you to specify the buffers to search by their filenames or buffer names. Internally, Occur mode has been rewritten, and now uses font-lock, among other changes." So you could do something like "emacs blahfiles*" and then: Mx multi-occur and/or Mx multi-occur-in-matching-buffers On Fri, Apr 8, 2011 at 2:06 PM, Jambunathan K <kjambunathan@gmail.com> wrote: > brian powell <briangpowellms@gmail.com> writes: > >> After reviewing what KEDIT ALL is; it seems to me all you want to do >> is--in an EMACS buffer--regardless of the version or type of EMACS: > >> >> Mx list-matching-lines >> > > I haven't used KEDIT. > > I did try out all.el. Within the occur-like buffer that all.el pops up, > one can edit the matches and have the replacements propagated to the > searched buffers. > > But list-matching-lines pops up a read-only buffer. Also the last line > of the docstring says `In any case the searched buffers are not > modified'. > > I think OP wanted something where the searched buffers are modified from > within the occur buffer. > > Jambunathan K. > >> On Mar 30, 7:53 am, Tom <adatgyu...@gmail.com> wrote: >>> Marc Mientki <no <at> no.com> writes: >>> >>> >>> >>> > Am 29.03.2011 17:42, schrieb Tom: >>> > > Do you know a package which implements the KEDIT ALL command for Emacs? >>> >>> > >http://www.kedit.com/hint_all.html >>> >>> >ftp://ftp.dina.kvl.dk/pub/Staff/Per.Abrahamsen/auctex/all.el >>> > Maybe? >>> >>> Looks good. Thanks. >>> >>> I wonder why it is not part of the Emacs distribution. Seems like a >>> useful package. >> >> > > -- > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Kedit-like ALL command for emacs 2011-04-08 18:06 ` Jambunathan K [not found] ` <BANLkTindCwtENejh7mqTgTET7f+pKsd4yQ@mail.gmail.com> @ 2011-04-09 16:53 ` Tom 2011-04-09 17:18 ` Drew Adams 1 sibling, 1 reply; 8+ messages in thread From: Tom @ 2011-04-09 16:53 UTC (permalink / raw) To: help-gnu-emacs Jambunathan K <kjambunathan <at> gmail.com> writes: > > I think OP wanted something where the searched buffers are modified from > within the occur buffer. > Yes. List-matching-lines is simply an alias for occur, so it's definitely not what I asked for, all.el on the other hand is pretty close. ^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: Kedit-like ALL command for emacs 2011-04-09 16:53 ` Tom @ 2011-04-09 17:18 ` Drew Adams 0 siblings, 0 replies; 8+ messages in thread From: Drew Adams @ 2011-04-09 17:18 UTC (permalink / raw) To: 'Tom', help-gnu-emacs > > I think OP wanted something where the searched buffers are > > modified from within the occur buffer. > > Yes. > > List-matching-lines is simply an alias for occur, so it's definitely > not what I asked for, all.el on the other hand is pretty close. It sounds like Per's `all.el' should be about what you want. Maybe this will also help; dunno: You can use `icicle-occur' (bound to `C-'' by default) on any number of buffers. You can use it to search and replace text, where the replacement happens on demand, on the fly. Unlike `query-replace(-regexp)', you can skip around and just hit a key when you want to make a change - you are not queried about the hits. *Completions* shows you essentially what `occur' and `all' show you, but without any context lines. And the hits are highlighted in the original buffer (which shows the complete context). Unlike `occur' and `all', the hits change dynamically as you type text into the minibuffer. IOW, it's like an instant, incrementally updated `occur'/`all'. icicle-occur: http://www.emacswiki.org/emacs/Icicles_-_Search_Commands%2c_Overview Search-and-replace: http://www.emacswiki.org/emacs/Icicles_-_Search-And-Replace ^ permalink raw reply [flat|nested] 8+ messages in thread
* Kedit-like ALL command for emacs @ 2011-03-29 15:42 Tom 0 siblings, 0 replies; 8+ messages in thread From: Tom @ 2011-03-29 15:42 UTC (permalink / raw) To: help-gnu-emacs Do you know a package which implements the KEDIT ALL command for Emacs? http://www.kedit.com/hint_all.html ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2011-04-09 17:18 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- [not found] <mailman.3.1301413811.27153.help-gnu-emacs@gnu.org> 2011-03-30 8:56 ` Kedit-like ALL command for emacs Marc Mientki 2011-03-30 11:53 ` Tom [not found] ` <mailman.6.1301486023.6119.help-gnu-emacs@gnu.org> 2011-04-07 15:48 ` brian powell 2011-04-08 18:06 ` Jambunathan K [not found] ` <BANLkTindCwtENejh7mqTgTET7f+pKsd4yQ@mail.gmail.com> 2011-04-08 19:27 ` Fwd: " brian powell 2011-04-09 16:53 ` Tom 2011-04-09 17:18 ` Drew Adams 2011-03-29 15:42 Tom
Code repositories for project(s) associated with this external index https://git.savannah.gnu.org/cgit/emacs.git https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.