From: Andreas Leha <andreas.leha@med.uni-goettingen.de>
To: emacs-orgmode@gnu.org
Subject: Re: source code block export no expansion
Date: Wed, 08 Dec 2010 07:55:11 +0100 [thread overview]
Message-ID: <4CFF2BCF.4030400@med.uni-goettingen.de> (raw)
In-Reply-To: <7587B29A-EF63-4FAD-BBDD-A59FFEA769D9@tsdye.com>
[-- Attachment #1.1.1: Type: text/plain, Size: 6662 bytes --]
Hi Tom,
thanks a lot for looking into it! Fixing this is unfortunately off my
limits.
But for me the unnamed session is a valid work-around for me, since I do
not need several sessions right now. Thanks for this hint.
Cheers,
Andreas
Am 07.12.2010 21:14, schrieb Thomas S. Dye:
> Aloha Andreas,
>
> Thanks for your patience and persistence. I think this might qualify
> as a bug. Using your code, if I don't run R in a session, or if I run
> R in a session but don't name the session,
> everything works as expected. The behavior changes for me when the
> session gets a name.
>
> All the best,
> Tom
>
>
> On Dec 7, 2010, at 9:46 AM, Andreas Leha wrote:
>
>> Hi Tom,
>>
>> thanks for the answer and thanks for spotting the typo. But even
>> with the typo corrected during export the noweb links are still exported.
>> #+srcname: mod1
>> #+begin_src R :tangle no :export code
>> print("mod1")
>> #+end_src
>>
>> #+srcname: mod2
>> #+begin_src R :tangle no :export code
>> print("mod2")
>> #+end_src
>>
>> #+srcname: part1
>> #+begin_src R :noweb tangle :tangle yes :exports code :session *R*
>> <<mod1>>
>> <<mod2>>
>> #+end_src
>>
>> Result:
>> ...
>> \lstset{language=R}
>> \begin{lstlisting}
>> print("mod1")
>> print("mod2")
>> \end{lstlisting}
>> ...
>>
>>
>>
>> Am 07.12.2010 20:33, schrieb Thomas S. Dye:
>>> Aloha Andreas,
>>>
>>> On Dec 7, 2010, at 8:49 AM, Andreas Leha wrote:
>>>
>>>> Hi Tom,
>>>>
>>>> thanks for this answer. This indeed comes closer to what I want.
>>>>
>>>> But, some comments:
>>>>
>>>> (1) There seems to be an error in the manual:
>>>> In the manual the :noweb tangle header argument is given as :noweb yes,
>>>> which is why I missed that option.
>>>
>>> I believe this is fixed at the
>>> source now, but am not sure how long it will take to propagate to
>>> the distributed documentation.
>>>
>>>> (2) The noweb link are expanded *always* (i.e. execution, export,
>>>> tangle) even with the :noweb tangle option:
>>>> #+srcname: mod1
>>>> #+begin_src R :tangle no :export code
>>>> print("mod1")
>>>> #+end_src
>>>>
>>>> #+srcname: mod2
>>>> #+begin_src R :tangle no :export code
>>>> print("mod2")
>>>> #+end_src
>>>>
>>>> #+srcname: part1
>>>> #+begin_src R :noweb tangle :tangle yes :export code :session *R*
>>>> <<mod1>>
>>>> <<mod2>>
>>>> #+end_src
>>>>
>>>>
>>>
>>> Perhaps this has to do with using :export instead of the correct
>>> header argument, :exports?
>>>
>>>> (3) I am looking for an option to disable the noweb link expansion
>>>> during *export* only. However, as I understand it, the :noweb tangle
>>>> header option is supposed to disable the expansion also for
>>>> *execution*.
>>>
>>> This isn't how it works for me. :noweb tangle inhibits noweb expansion during export only.
>>>
>>>>
>>>> So, is this not possible right now?
>>>>
>>>
>>> It is possible now. If the :exports header argument doesn't fix
>>> your problem, come back to the list.
>>>
>>> All the best,
>>> Tom
>>>
>>>> Cheers,
>>>> Andreas
>>>>
>>>>
>>>>
>>>> Am 07.12.2010 19:37, schrieb Thomas S. Dye:
>>>>> Aloha Andreas,
>>>>>
>>>>> Perhaps :noweb tangle will do what you want.
>>>>>
>>>>> hth,
>>>>> Tom
>>>>>
>>>>> On Dec 7, 2010, at 7:38 AM, Andreas Leha wrote:
>>>>>
>>>>>> Hi all,
>>>>>>
>>>>>> I have a question about exporting source code blocks. Say, I have
>>>>>> several modules (mod1, mod2), that build a bigger part (part1) of my
>>>>>> program, e.g.:
>>>>>>
>>>>>>
>>>>>> #+srcname: mod1
>>>>>> #+begin_src R :tangle no :export code
>>>>>> print("mod1")
>>>>>> #+end_src
>>>>>>
>>>>>> #+srcname: mod2
>>>>>> #+begin_src R :tangle no :export code
>>>>>> print("mod2")
>>>>>> #+end_src
>>>>>>
>>>>>> #+srcname: part1
>>>>>> #+begin_src R :noweb yes :tangle yes :export code :session *R*
>>>>>> <<mod1>>
>>>>>> <<mod2>>
>>>>>> #+end_src
>>>>>>
>>>>>>
>>>>>> Now during the tangling I would like to tangle just the full part1 -
>>>>>> with noweb links being expanded. Also during execution the noweb
>>>>>> links
>>>>>> should be expanded. This is not a problem.
>>>>>>
>>>>>> But at the same time, during the export I'd like to export all three
>>>>>> code snippets, but I'd prefer the noweb links not to be expanded. Is
>>>>>> that possible?
>>>>>>
>>>>>> Thanks in advance,
>>>>>> Andreas
>>>>>>
>>>>>> _______________________________________________
>>>>>> Emacs-orgmode mailing list
>>>>>> Please use `Reply All' to send replies to the list.
>>>>>> Emacs-orgmode@gnu.org <mailto:Emacs-orgmode@gnu.org>
>>>>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Emacs-orgmode mailing list
>>>>> Please use `Reply All' to send replies to the list.
>>>>> Emacs-orgmode@gnu.org <mailto:Emacs-orgmode@gnu.org>
>>>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>>
>>>> --
>>>> Andreas Leha
>>>>
>>>> Universitätsmedizin Göttingen
>>>> Abteilung Medizinische Statistik
>>>> Humboldtallee 32
>>>> 37073 Göttingen
>>>>
>>>> Tel: +49 (0)551 39-10710
>>>> Fax: +49 (0)551 39-4995
>>>>
>>>> http://www.ams.med.uni-goettingen.de/amsneu/leha.html
>>>>
>>>>
>>>>
>>>> University Medical Center Göttingen
>>>> Department for Medical Statistics
>>>> Humboldtallee 32
>>>> 37073 Göttingen
>>>> Germany
>>>>
>>>> Phone: +49 (0) 551 39-10710
>>>> Fax: +49 (0) 551 39-4995
>>>>
>>>> http://www.ams.med.uni-goettingen.de/amsneu/leha-en.html
>>>>
>>>>
>>>> _______________________________________________
>>>> Emacs-orgmode mailing list
>>>> Please use `Reply All' to send replies to the list.
>>>> Emacs-orgmode@gnu.org
>>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>
>>
>> --
>> Andreas Leha
>>
>> Universitätsmedizin Göttingen
>> Abteilung Medizinische Statistik
>> Humboldtallee 32
>> 37073 Göttingen
>>
>> Tel: +49 (0)551 39-10710
>> Fax: +49 (0)551 39-4995
>>
>> http://www.ams.med.uni-goettingen.de/amsneu/leha.html
>>
>>
>>
>> University Medical Center Göttingen
>> Department for Medical Statistics
>> Humboldtallee 32
>> 37073 Göttingen
>> Germany
>>
>> Phone: +49 (0) 551 39-10710
>> Fax: +49 (0) 551 39-4995
>>
>> http://www.ams.med.uni-goettingen.de/amsneu/leha-en.html
>>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
[-- Attachment #1.1.2: Type: text/html, Size: 15762 bytes --]
[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 6432 bytes --]
[-- Attachment #2: Type: text/plain, Size: 201 bytes --]
_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
next prev parent reply other threads:[~2010-12-08 6:55 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-07 17:38 source code block export no expansion Andreas Leha
2010-12-07 18:37 ` Thomas S. Dye
2010-12-07 18:49 ` Andreas Leha
2010-12-07 19:33 ` Thomas S. Dye
2010-12-07 19:46 ` Andreas Leha
2010-12-07 20:14 ` Thomas S. Dye
2010-12-08 6:55 ` Andreas Leha [this message]
2010-12-08 16:49 ` Thomas S. Dye
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CFF2BCF.4030400@med.uni-goettingen.de \
--to=andreas.leha@med.uni-goettingen.de \
--cc=emacs-orgmode@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.