* tab visibility cycling doesn't work over putty/ssh with viper-mode enabled @ 2010-05-20 2:42 Herbert Sitz 2010-05-20 4:14 ` Herbert Sitz 0 siblings, 1 reply; 6+ messages in thread From: Herbert Sitz @ 2010-05-20 2:42 UTC (permalink / raw) To: emacs-orgmode I'm trying to run orgmode/emacs over an ssh connection with PuTTY. Win7 client and Ubuntu host. With viper-mode enabled all I get is a bell when I click on tab to cycle the visibility of a heading in viper's normal mode. Shift-tab works okay, as does a tab key if I am in viper's insert mode (but of course it merely inserts tab then rather than cycling visibility). Tab cycling seems to work properly if viper-mode is disabled. I'm new to emacs/orgmode (coming from vim) and to ssh sessions, stumped on this tab key issue though I suspect it's nothing complicated. Can someone tell me how to get tab cycling working in my putty client when using viper-mode? Thanks! ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: tab visibility cycling doesn't work over putty/ssh with viper-mode enabled 2010-05-20 2:42 tab visibility cycling doesn't work over putty/ssh with viper-mode enabled Herbert Sitz @ 2010-05-20 4:14 ` Herbert Sitz 2010-05-20 19:41 ` Jan Böcker 0 siblings, 1 reply; 6+ messages in thread From: Herbert Sitz @ 2010-05-20 4:14 UTC (permalink / raw) To: emacs-orgmode Herbert Sitz <hsitz <at> nwlink.com> writes: > > With viper-mode enabled all I get is a bell when I click on tab to cycle the > visibility of a heading in viper's normal mode. > > Shift-tab works okay, as does a tab key if I am in viper's insert mode (but of > course it merely inserts tab then rather than cycling visibility). > > Tab cycling seems to work properly if viper-mode is disabled. > It seems there are some other keys that don't work in PuTTY. One of the most obvious is CTRL-C, which I think works only if preceded by some other meta key. E.g., CTRL-X, CTRL-C works normally to quite emacs. But when a sequence starts with CTRL-C the bell goes off and no keypress is recognized. This makes it impossible to use keys to enter agenda view, which is accessed via CTRL-C,a. I assume my setup is common enough (Win7 PuTTY client accessing openssh server on Ubuntu 10.04) that someone has worked out these problems? Thanks for any tips. -- Herb ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Re: tab visibility cycling doesn't work over putty/ssh with viper-mode enabled 2010-05-20 4:14 ` Herbert Sitz @ 2010-05-20 19:41 ` Jan Böcker 2010-05-21 21:02 ` Herbert Sitz 0 siblings, 1 reply; 6+ messages in thread From: Jan Böcker @ 2010-05-20 19:41 UTC (permalink / raw) To: Herbert Sitz; +Cc: emacs-orgmode On 05/20/2010 06:14 AM, Herbert Sitz wrote: > Herbert Sitz <hsitz <at> nwlink.com> writes: >> >> With viper-mode enabled all I get is a bell when I click on tab to cycle the >> visibility of a heading in viper's normal mode. >> Hi Herbert, I could not reproduce this here (Ubuntu 10.04 host, Putty on Windows 7). I have no experience with viper-mode and only know very basic vi commands. When viper-mode asked me for a user level, I specified 5. Org-mode version 6.36trans (release_6.36.52.geec2) Visibility cycling with TAB works both in command and insert mode. I can also access the agenda using C-c a a. Looks like putty is misconfigured. While quickly scanning through putty's configuration menu, the only setting I noticed was "Connection -> Data -> Terminal-type string", which is set to "xterm" here. However, I did not modify the default values, so it should work out of the box. You can try logging in with putty, executing "sleep 5", and interrupting that with C-c. If that does not work, the problem is definitely not emacs related. HTH, Jan ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: tab visibility cycling doesn't work over putty/ssh with viper-mode enabled 2010-05-20 19:41 ` Jan Böcker @ 2010-05-21 21:02 ` Herbert Sitz 2010-05-22 4:42 ` Herbert Sitz 0 siblings, 1 reply; 6+ messages in thread From: Herbert Sitz @ 2010-05-21 21:02 UTC (permalink / raw) To: emacs-orgmode Jan Böcker <jan.boecker <at> jboecker.de> writes: > >Visibility cycling with TAB works both in command and insert mode. > I can also access the agenda using C-c a a. > >Looks like putty is misconfigured. While quickly >scanning through >putty's configuration menu, the only setting I >noticed was "Connection >-> Data -> Terminal-type string", which is >set to "xterm" here. > >However, I did not modify the default values, >so it should work out of >the box. > >You can try logging in with putty, executing >"sleep 5", and interrupting >that with C-c. If that does not work, >the problem is definitely not >emacs related. > >HTH, Jan > Jan -- Thanks, but I still haven't solved this yet and I don't think there's any problem with PuTTY configuration. However, my problems with TAB key and C-C appear to be quite different, and only the TAB key one appears to be unique to using PuTTY/ssh. First, regarding C-c a not working to bring up agenda-view, this problem exists on my emacs instance in Ubuntu even when using it directly, not through ssh. Pressing C-c a gives error message 'C-c a is undefined', despite the fact that agenda-view works fine when accessing it through the menu system. Frustrating, but it has nothing to do with PuTTY. (And PuTTY does send C-c properly to stop the 'sleep 5' process in a bare terminal.) Second, the problem with TAB key in viper-mode does seem specific to PuTTY/ssh, since it works fine when working directly. This doesn't seem possible that it's a PuTTY problem, since so far as I can tell TAB works properly in all other modes, and it works properly to cycle visibility as soon as I turn viper-mode off. Thanks for the suggestions though! I'm wondering if you have any others?. . . Regards, Herb ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: tab visibility cycling doesn't work over putty/ssh with viper-mode enabled 2010-05-21 21:02 ` Herbert Sitz @ 2010-05-22 4:42 ` Herbert Sitz 2010-05-22 11:46 ` Jan Böcker 0 siblings, 1 reply; 6+ messages in thread From: Herbert Sitz @ 2010-05-22 4:42 UTC (permalink / raw) To: emacs-orgmode Herbert Sitz <hsitz <at> nwlink.com> writes: > First, regarding C-c a not working to bring up > agenda-view, this problem exists on my > emacs instance in Ubuntu even when > using it directly, not through ssh. > Pressing C-c a gives error message > 'C-c a is undefined', despite the fact that Sorry, the issue with 'C-c a' was stupid error on my part. I had forgotten that you have to put the 'C-c a' key definition in the .emacs file. So the TAB problem with viper-mode is the only real problem I have. -- Herb ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Re: tab visibility cycling doesn't work over putty/ssh with viper-mode enabled 2010-05-22 4:42 ` Herbert Sitz @ 2010-05-22 11:46 ` Jan Böcker 0 siblings, 0 replies; 6+ messages in thread From: Jan Böcker @ 2010-05-22 11:46 UTC (permalink / raw) To: Herbert Sitz; +Cc: emacs-orgmode On 05/21/2010 11:02 PM, Herbert Sitz wrote: > Second, the problem with TAB key in viper-mode > does seem specific to PuTTY/ssh, > since it works fine when working directly. When you say "working directly", I assume you use the GUI interface of emacs. Maybe the problem is not PuTTY-related but caused by running emacs in a tty. Try running "emacs -nw" in a terminal on the Ubuntu host and check if you can reproduce the behaviour there. - Jan ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-05-22 11:46 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-05-20 2:42 tab visibility cycling doesn't work over putty/ssh with viper-mode enabled Herbert Sitz 2010-05-20 4:14 ` Herbert Sitz 2010-05-20 19:41 ` Jan Böcker 2010-05-21 21:02 ` Herbert Sitz 2010-05-22 4:42 ` Herbert Sitz 2010-05-22 11:46 ` Jan Böcker
Code repositories for project(s) associated with this external index https://git.savannah.gnu.org/cgit/emacs.git https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.