From: "Mario E. Munich" <mariomu@ieee.org>
To: Matthew Lundin <mdl@imapmail.org>
Cc: emacs-orgmode@gnu.org
Subject: Re: property searches for #+CATEGORY
Date: Mon, 08 Dec 2008 22:51:13 -0800 [thread overview]
Message-ID: <493E1561.5090502@ieee.org> (raw)
In-Reply-To: <m2ej0igm5u.fsf@fastmail.fm>
Dear Matt,
thanks a lot for the tips... I have settled down on using FILETAGS and
then using C-c a M to get the TODO lists for either personal or work.
Thanks a lot for all the help!
Best regards,
-Mario
Matthew Lundin wrote:
> Hi Mario,
>
> I find the easiest way to filter for personal and professional tasks
> is to use a filetag at the top of each file, e.g.,
>
> #+FILETAGS: prof
>
> I use filetags because the agenda has a wonderful shortcut for
> filtering by tags. When I call the agenda, I simply hit "/" and then
> the shortcut for either my "prof" or "per" tag to filter the items.
> It's lightning quick and does the job painlessly (i.e., without any
> custom agenda searches). I have org-use-tag-inheritance set to t, but
> if you want fine-grained control of what tags are inherited, Org 6.14
> has some nice new options.
>
> Of course, if you'd prefer to use categories instead of filetags, they
> also work just fine for custom agenda searches. For example,
>
> (setq org-agenda-custom-commands
> '(("w" tags-todo "CATEGORY=\"work\"")
> ("h" tags-todo "CATEGORY=\"home\"")))
>
> Finally, you can always search by category using C-c a m or C-c a M
> and then typing the following:
>
> CATEGORY="work"
>
> In short, there are lot of nice ways to achieve the functionality
> you're looking for.
>
> I hope this helps.
>
> Best,
>
> Matt
>
> "Mario E. Munich" <mariomu@ieee.org> writes:
>
>
>> Dear Carsten,
>>
>> I am really sorry for not having been clear... let me explain myself a
>> little bit and hopefully you would be able to point me in the right
>> direction.
>>
>> First of all, I would like to mention that I am a planner-el convert
>> given the flexibility that org-mode provides. I have converted all my
>> planner files into org-mode files and I am moving forward using org-mode.
>>
>> My particular use-case scenario (that seemed to be the same scenario
>> that Adam mentioned in this thread) is that I would like to have two set
>> of org files stored in separated directories: one set for the office
>> (work) and another set for home (personal). I am able to run agenda
>> commands in both sets of files using org-agenda-files and I am able to
>> see all the TODO items using the basic C-a a commands. However, I would
>> like to search for TODO items that correspond only to my work or only to
>> my home (basically, have two emacs buffers, one with work TODO lists and
>> another with personal TODO lists to avoid cluttering).
>>
>> From this thread of emails of about a year ago, I thought that the
>> solution to my use-case was to add a #+CATEGORY indicator on the files.
>> I have added the following lines:
>>
>> #+CATEGORY: work my-work-project
>>
>> or
>>
>> #+CATEGORY: personal my-personal-project
>>
>> accordingly in the work and the personal files.
>> So, I am now at the point in which I would like to customize the
>> org-agenda-custom-commands to search for CATEGORY work or personal TODO
>> items. I have looked in the mailing list and in the org-mode
>> documentation and I have not been able to find a good example on how to
>> do this (I should add that my lisp skills are not that great and
>> therefore that might be the root cause of the problem).
>>
>> I have several questions:
>>
>> 1) Given my use-case, is this the right approach? Should I be using
>> something else like FILETAGS?
>>
>> I think that this use-case might be rather common for people working in
>> industry in which you would like to have a separation between work and
>> personal files due to IP and ownership issues. Things might be even
>> worse if you use SVN at work and GIT at home (my case). So, I would
>> think that it would be useful to have a simple skeleton setup in the
>> documentation. In planner, I used to have a way of switching between
>> pointing at work or personal files, but this setup was less than ideal.
>>
>> 2) If using CATEGORY is the right thing to do, how should I write the
>> search function?
>>
>> Thanks a lot for your help and support... And not that you need any more
>> praise for org-mode, but, man, it is really, really good!!!!
>>
>> Thanks again,
>>
>> -Mario
>>
>> Carsten Dominik wrote:
>>
>>> Hi Mario,
>>>
>>> the fact that you "have read all the postings" almost contradicts
>>> your other statement that you "have implemented *the* method".
>>> I guess you need to tell us more about your detailed setup
>>> to get a useful reply.
>>>
>>> - Carsten
>>>
>>> On Dec 8, 2008, at 12:35 AM, Mario E. Munich wrote:
>>>
>>>
>>>> Dear all,
>>>>
>>>> I am sorry to bother you with a silly question, but I have read all the
>>>> postings on the orgmode list on how to separate files for work and
>>>> personal using the CATEGORY stuff. I have implemented the method, but I
>>>> cannot get org-agenda-custom-commands to search properly in each
>>>> category. Any pointers/help would be highly appreciated.
>>>>
>>>> Best regards,
>>>>
>>>> -Mario
>>>>
>>>> --
>>>> Mario E. Munich, PhD
>>>> VP of Engineering
>>>> Principal Scientist
>>>> Evolution Robotics
>>>> Ph: (626) 993-3317
>>>> Fax: (626) 993-3301
>>>> mario@evolution.com
>>>> http://www.evolution.com
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Emacs-orgmode mailing list
>>>> Remember: use `Reply All' to send replies to the list.
>>>> Emacs-orgmode@gnu.org
>>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Remember: use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
next prev parent reply other threads:[~2008-12-09 6:51 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-07 23:35 property searches for #+CATEGORY Mario E. Munich
2008-12-08 16:40 ` Carsten Dominik
2008-12-09 0:33 ` Mario E. Munich
2008-12-09 1:41 ` Matthew Lundin
2008-12-09 6:51 ` Mario E. Munich [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-12-07 23:39 Mario E. Munich
2007-11-07 11:17 Adam Spiers
2007-11-07 12:49 ` Bastien
2007-11-07 12:15 ` Adam Spiers
2007-11-07 13:23 ` Tim O'Callaghan
2007-11-07 13:34 ` Adam Spiers
2007-11-07 13:59 ` Tim O'Callaghan
2007-11-07 14:28 ` Adam Spiers
2007-11-07 14:52 ` Tim O'Callaghan
2007-11-07 16:35 ` Adam Spiers
2007-11-07 16:15 ` Carsten Dominik
2007-11-07 18:07 ` Adam Spiers
2007-11-08 4:55 ` Bastien
2007-11-08 8:54 ` Carsten Dominik
2007-11-07 14:49 ` Bastien
2007-11-07 14:32 ` Adam Spiers
2007-11-07 14:15 ` Bastien
2007-11-07 13:52 ` Adam Spiers
2007-11-07 17:16 ` Bastien
2007-11-07 17:23 ` Adam Spiers
2007-11-08 4:42 ` Bastien
2007-11-07 16:20 ` Carsten Dominik
2007-11-08 0:04 ` Adam Spiers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=493E1561.5090502@ieee.org \
--to=mariomu@ieee.org \
--cc=emacs-orgmode@gnu.org \
--cc=mdl@imapmail.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.