* Underlines and strike-through lines in column view
@ 2008-04-24 14:55 Wanrong Lin
2008-04-24 16:44 ` Jose Robins
2008-04-25 13:52 ` Carsten Dominik
0 siblings, 2 replies; 15+ messages in thread
From: Wanrong Lin @ 2008-04-24 14:55 UTC (permalink / raw
To: org-mode mailing list
Hi,
In the column view, I often see some underlines and strike-through lines
that show up kind of randomly. I have seen this for quite sometime,
maybe since I began to use the column view 3 or 4 months ago. Are there
any special meanings for those lines or they are just noise? I am now
using Emacs 22.2 (on windows) and org-6.02. Thank you.
Wanrong
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Underlines and strike-through lines in column view
2008-04-24 14:55 Underlines and strike-through lines in column view Wanrong Lin
@ 2008-04-24 16:44 ` Jose Robins
2008-04-25 13:52 ` Carsten Dominik
1 sibling, 0 replies; 15+ messages in thread
From: Jose Robins @ 2008-04-24 16:44 UTC (permalink / raw
Cc: org-mode mailing list
Wanrong Lin wrote:
> Hi,
>
> In the column view, I often see some underlines and strike-through lines
> that show up kind of randomly. I have seen this for quite sometime,
> maybe since I began to use the column view 3 or 4 months ago. Are there
> any special meanings for those lines or they are just noise? I am now
> using Emacs 22.2 (on windows) and org-6.02. Thank you.
I've also seen this. Do you have it setup such that the DONE items have
strikethru property set? I think in Column mode, org-mode gets confused
about this and the strike thru shows up inconsistently. Not sure if
there is another explanation.
Jose
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Underlines and strike-through lines in column view
2008-04-24 14:55 Underlines and strike-through lines in column view Wanrong Lin
2008-04-24 16:44 ` Jose Robins
@ 2008-04-25 13:52 ` Carsten Dominik
2008-04-30 21:25 ` Wanrong Lin
1 sibling, 1 reply; 15+ messages in thread
From: Carsten Dominik @ 2008-04-25 13:52 UTC (permalink / raw
To: Wanrong Lin; +Cc: org-mode mailing list
On Apr 24, 2008, at 4:55 PM, Wanrong Lin wrote:
> Hi,
>
> In the column view, I often see some underlines and strike-through
> lines that show up kind of randomly. I have seen this for quite
> sometime, maybe since I began to use the column view 3 or 4 months
> ago. Are there any special meanings for those lines or they are just
> noise? I am now using Emacs 22.2 (on windows) and org-6.02. Thank you.
This happens because each column is an overlay over a one character in
the line below, and it seems that the properties of the underlying
faces are still coming through. Column one
has the properties of character one in the line, column two that of
character two, etc.
Fixed now, I think.
Why in the world would you be using a strike-through face? There is
nothing more ugly in the world of typography than strike-through
faces, and web sites that use it immediately get onto the black list
of my parental control program :-)
- Carsten
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Underlines and strike-through lines in column view
2008-04-25 13:52 ` Carsten Dominik
@ 2008-04-30 21:25 ` Wanrong Lin
2008-05-01 8:07 ` Carsten Dominik
0 siblings, 1 reply; 15+ messages in thread
From: Wanrong Lin @ 2008-04-30 21:25 UTC (permalink / raw
Cc: org-mode mailing list
Hi, Carsten,
I just tried org-mode version 6.02b, which seems to have the fix
included. Glad those "line noises" disappeared. However, there seems to
be some new (compared with 6.02) problems now:
1. Before the fix (6.02), faces of headings in org files are preserved
in the column view. In 6.02b, text in column view is all in the same
face. Can we restore the 6.02 behavior?
2. Customization for org-column face does not work right. Even though I
only customized the "background" property of org-column face and hence
expect the font stays the same as my default font (a bold font), but the
font changes to regular (no bold text). Funny thing is, the sample text
showed in the face customization window is in the correct font, but the
actual font in the org file (column view) is not. Also even after I
forced the "Weight" to be "bold", that still did not work. My org-column
face is as following:
Family: unspecified
Width: unspecified
Height: unspecified
Weight: unspecified
Slant: unspecified
Foreground: unspecified
Background: gray80
Underline: unspecified
Overline: unspecified
Strike-through: unspecified
Box: unspecified
Inverse: unspecified
Stipple: unspecified
Font or fontset: nil
Inherit: unspecified
Thanks a lot if you can take a look of it.
Wanrong
Carsten Dominik wrote:
>
> On Apr 24, 2008, at 4:55 PM, Wanrong Lin wrote:
>> Hi,
>>
>> In the column view, I often see some underlines and strike-through
>> lines that show up kind of randomly. I have seen this for quite
>> sometime, maybe since I began to use the column view 3 or 4 months
>> ago. Are there any special meanings for those lines or they are just
>> noise? I am now using Emacs 22.2 (on windows) and org-6.02. Thank you.
>
> This happens because each column is an overlay over a one character in
> the line below, and it seems that the properties of the underlying
> faces are still coming through. Column one
> has the properties of character one in the line, column two that of
> character two, etc.
>
> Fixed now, I think.
>
> Why in the world would you be using a strike-through face? There is
> nothing more ugly in the world of typography than strike-through
> faces, and web sites that use it immediately get onto the black list
> of my parental control program :-)
>
> - Carsten
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Underlines and strike-through lines in column view
2008-04-30 21:25 ` Wanrong Lin
@ 2008-05-01 8:07 ` Carsten Dominik
2008-05-07 22:23 ` Wanrong Lin
0 siblings, 1 reply; 15+ messages in thread
From: Carsten Dominik @ 2008-05-01 8:07 UTC (permalink / raw
To: Wanrong Lin; +Cc: org-mode mailing list
Fixed, thanks.
- Carsten
On Apr 30, 2008, at 11:25 PM, Wanrong Lin wrote:
> Hi, Carsten,
>
> I just tried org-mode version 6.02b, which seems to have the fix
> included. Glad those "line noises" disappeared. However, there seems
> to be some new (compared with 6.02) problems now:
>
> 1. Before the fix (6.02), faces of headings in org files are
> preserved in the column view. In 6.02b, text in column view is all
> in the same face. Can we restore the 6.02 behavior?
> 2. Customization for org-column face does not work right. Even
> though I only customized the "background" property of org-column
> face and hence expect the font stays the same as my default font (a
> bold font), but the font changes to regular (no bold text). Funny
> thing is, the sample text showed in the face customization window is
> in the correct font, but the actual font in the org file (column
> view) is not. Also even after I forced the "Weight" to be "bold",
> that still did not work. My org-column face is as following:
>
> Family: unspecified
> Width: unspecified
> Height: unspecified
> Weight: unspecified
> Slant: unspecified
> Foreground: unspecified
> Background: gray80
> Underline: unspecified
> Overline: unspecified
> Strike-through: unspecified
> Box: unspecified
> Inverse: unspecified
> Stipple: unspecified
> Font or fontset: nil
> Inherit: unspecified
>
> Thanks a lot if you can take a look of it.
>
> Wanrong
>
> Carsten Dominik wrote:
>>
>> On Apr 24, 2008, at 4:55 PM, Wanrong Lin wrote:
>>> Hi,
>>>
>>> In the column view, I often see some underlines and strike-through
>>> lines that show up kind of randomly. I have seen this for quite
>>> sometime, maybe since I began to use the column view 3 or 4 months
>>> ago. Are there any special meanings for those lines or they are
>>> just noise? I am now using Emacs 22.2 (on windows) and org-6.02.
>>> Thank you.
>>
>> This happens because each column is an overlay over a one character
>> in the line below, and it seems that the properties of the
>> underlying faces are still coming through. Column one
>> has the properties of character one in the line, column two that of
>> character two, etc.
>>
>> Fixed now, I think.
>>
>> Why in the world would you be using a strike-through face? There
>> is nothing more ugly in the world of typography than strike-through
>> faces, and web sites that use it immediately get onto the black
>> list of my parental control program :-)
>>
>> - Carsten
>>
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Underlines and strike-through lines in column view
2008-05-01 8:07 ` Carsten Dominik
@ 2008-05-07 22:23 ` Wanrong Lin
2008-05-08 6:29 ` Carsten Dominik
0 siblings, 1 reply; 15+ messages in thread
From: Wanrong Lin @ 2008-05-07 22:23 UTC (permalink / raw
Cc: org-mode mailing list
Hi, Carsten,
I just tried your patch for this fix, the column view faces are OK now,
but those strike-through line noises come back again. Seems we can not
get both. :-)
Wanrong
Carsten Dominik wrote:
> Fixed, thanks.
>
> - Carsten
>
> On Apr 30, 2008, at 11:25 PM, Wanrong Lin wrote:
>
>> Hi, Carsten,
>>
>> I just tried org-mode version 6.02b, which seems to have the fix
>> included. Glad those "line noises" disappeared. However, there seems
>> to be some new (compared with 6.02) problems now:
>>
>> 1. Before the fix (6.02), faces of headings in org files are
>> preserved in the column view. In 6.02b, text in column view is all in
>> the same face. Can we restore the 6.02 behavior?
>> 2. Customization for org-column face does not work right. Even though
>> I only customized the "background" property of org-column face and
>> hence expect the font stays the same as my default font (a bold
>> font), but the font changes to regular (no bold text). Funny thing
>> is, the sample text showed in the face customization window is in the
>> correct font, but the actual font in the org file (column view) is
>> not. Also even after I forced the "Weight" to be "bold", that still
>> did not work. My org-column face is as following:
>>
>> Family: unspecified
>> Width: unspecified
>> Height: unspecified
>> Weight: unspecified
>> Slant: unspecified
>> Foreground: unspecified
>> Background: gray80
>> Underline: unspecified
>> Overline: unspecified
>> Strike-through: unspecified
>> Box: unspecified
>> Inverse: unspecified
>> Stipple: unspecified
>> Font or fontset: nil
>> Inherit: unspecified
>>
>> Thanks a lot if you can take a look of it.
>>
>> Wanrong
>>
>> Carsten Dominik wrote:
>>>
>>> On Apr 24, 2008, at 4:55 PM, Wanrong Lin wrote:
>>>> Hi,
>>>>
>>>> In the column view, I often see some underlines and strike-through
>>>> lines that show up kind of randomly. I have seen this for quite
>>>> sometime, maybe since I began to use the column view 3 or 4 months
>>>> ago. Are there any special meanings for those lines or they are
>>>> just noise? I am now using Emacs 22.2 (on windows) and org-6.02.
>>>> Thank you.
>>>
>>> This happens because each column is an overlay over a one character
>>> in the line below, and it seems that the properties of the
>>> underlying faces are still coming through. Column one
>>> has the properties of character one in the line, column two that of
>>> character two, etc.
>>>
>>> Fixed now, I think.
>>>
>>> Why in the world would you be using a strike-through face? There is
>>> nothing more ugly in the world of typography than strike-through
>>> faces, and web sites that use it immediately get onto the black list
>>> of my parental control program :-)
>>>
>>> - Carsten
>>>
>>
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Remember: use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Underlines and strike-through lines in column view
2008-05-07 22:23 ` Wanrong Lin
@ 2008-05-08 6:29 ` Carsten Dominik
2008-05-08 14:32 ` Wanrong Lin
0 siblings, 1 reply; 15+ messages in thread
From: Carsten Dominik @ 2008-05-08 6:29 UTC (permalink / raw
To: Wanrong Lin; +Cc: org-mode mailing list
Hi Wanrong,
I cannot reproduce this,, works just fine for me.
- Carsten
On May 8, 2008, at 12:23 AM, Wanrong Lin wrote:
>
> Hi, Carsten,
>
> I just tried your patch for this fix, the column view faces are OK
> now, but those strike-through line noises come back again. Seems we
> can not get both. :-)
>
> Wanrong
>
> Carsten Dominik wrote:
>> Fixed, thanks.
>>
>> - Carsten
>>
>> On Apr 30, 2008, at 11:25 PM, Wanrong Lin wrote:
>>
>>> Hi, Carsten,
>>>
>>> I just tried org-mode version 6.02b, which seems to have the fix
>>> included. Glad those "line noises" disappeared. However, there
>>> seems to be some new (compared with 6.02) problems now:
>>>
>>> 1. Before the fix (6.02), faces of headings in org files are
>>> preserved in the column view. In 6.02b, text in column view is all
>>> in the same face. Can we restore the 6.02 behavior?
>>> 2. Customization for org-column face does not work right. Even
>>> though I only customized the "background" property of org-column
>>> face and hence expect the font stays the same as my default font
>>> (a bold font), but the font changes to regular (no bold text).
>>> Funny thing is, the sample text showed in the face customization
>>> window is in the correct font, but the actual font in the org file
>>> (column view) is not. Also even after I forced the "Weight" to be
>>> "bold", that still did not work. My org-column face is as following:
>>>
>>> Family: unspecified
>>> Width: unspecified
>>> Height: unspecified
>>> Weight: unspecified
>>> Slant: unspecified
>>> Foreground: unspecified
>>> Background: gray80
>>> Underline: unspecified
>>> Overline: unspecified
>>> Strike-through: unspecified
>>> Box: unspecified
>>> Inverse: unspecified
>>> Stipple: unspecified
>>> Font or fontset: nil
>>> Inherit: unspecified
>>>
>>> Thanks a lot if you can take a look of it.
>>>
>>> Wanrong
>>>
>>> Carsten Dominik wrote:
>>>>
>>>> On Apr 24, 2008, at 4:55 PM, Wanrong Lin wrote:
>>>>> Hi,
>>>>>
>>>>> In the column view, I often see some underlines and strike-
>>>>> through lines that show up kind of randomly. I have seen this
>>>>> for quite sometime, maybe since I began to use the column view 3
>>>>> or 4 months ago. Are there any special meanings for those lines
>>>>> or they are just noise? I am now using Emacs 22.2 (on windows)
>>>>> and org-6.02. Thank you.
>>>>
>>>> This happens because each column is an overlay over a one
>>>> character in the line below, and it seems that the properties of
>>>> the underlying faces are still coming through. Column one
>>>> has the properties of character one in the line, column two that
>>>> of character two, etc.
>>>>
>>>> Fixed now, I think.
>>>>
>>>> Why in the world would you be using a strike-through face? There
>>>> is nothing more ugly in the world of typography than strike-
>>>> through faces, and web sites that use it immediately get onto the
>>>> black list of my parental control program :-)
>>>>
>>>> - Carsten
>>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Remember: use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Underlines and strike-through lines in column view
2008-05-08 6:29 ` Carsten Dominik
@ 2008-05-08 14:32 ` Wanrong Lin
2008-05-15 17:40 ` Wanrong Lin
0 siblings, 1 reply; 15+ messages in thread
From: Wanrong Lin @ 2008-05-08 14:32 UTC (permalink / raw
Cc: org-mode mailing list
Just a reminder: do you have any TODO faces with strike-through lines?
Remember the line noises will only happen when that is true.
Also, maybe there are some other check-ins after your patch that fixed
this. I only tried your patch, not the latest GIT revision. I can just
wait until next release to test again.
Thanks a lot.
Wanrong
Carsten Dominik wrote:
> Hi Wanrong,
>
> I cannot reproduce this,, works just fine for me.
>
> - Carsten
>
> On May 8, 2008, at 12:23 AM, Wanrong Lin wrote:
>
>>
>> Hi, Carsten,
>>
>> I just tried your patch for this fix, the column view faces are OK
>> now, but those strike-through line noises come back again. Seems we
>> can not get both. :-)
>>
>> Wanrong
>>
>> Carsten Dominik wrote:
>>> Fixed, thanks.
>>>
>>> - Carsten
>>>
>>> On Apr 30, 2008, at 11:25 PM, Wanrong Lin wrote:
>>>
>>>> Hi, Carsten,
>>>>
>>>> I just tried org-mode version 6.02b, which seems to have the fix
>>>> included. Glad those "line noises" disappeared. However, there
>>>> seems to be some new (compared with 6.02) problems now:
>>>>
>>>> 1. Before the fix (6.02), faces of headings in org files are
>>>> preserved in the column view. In 6.02b, text in column view is all
>>>> in the same face. Can we restore the 6.02 behavior?
>>>> 2. Customization for org-column face does not work right. Even
>>>> though I only customized the "background" property of org-column
>>>> face and hence expect the font stays the same as my default font (a
>>>> bold font), but the font changes to regular (no bold text). Funny
>>>> thing is, the sample text showed in the face customization window
>>>> is in the correct font, but the actual font in the org file (column
>>>> view) is not. Also even after I forced the "Weight" to be "bold",
>>>> that still did not work. My org-column face is as following:
>>>>
>>>> Family: unspecified
>>>> Width: unspecified
>>>> Height: unspecified
>>>> Weight: unspecified
>>>> Slant: unspecified
>>>> Foreground: unspecified
>>>> Background: gray80
>>>> Underline: unspecified
>>>> Overline: unspecified
>>>> Strike-through: unspecified
>>>> Box: unspecified
>>>> Inverse: unspecified
>>>> Stipple: unspecified
>>>> Font or fontset: nil
>>>> Inherit: unspecified
>>>>
>>>> Thanks a lot if you can take a look of it.
>>>>
>>>> Wanrong
>>>>
>>>> Carsten Dominik wrote:
>>>>>
>>>>> On Apr 24, 2008, at 4:55 PM, Wanrong Lin wrote:
>>>>>> Hi,
>>>>>>
>>>>>> In the column view, I often see some underlines and
>>>>>> strike-through lines that show up kind of randomly. I have seen
>>>>>> this for quite sometime, maybe since I began to use the column
>>>>>> view 3 or 4 months ago. Are there any special meanings for those
>>>>>> lines or they are just noise? I am now using Emacs 22.2 (on
>>>>>> windows) and org-6.02. Thank you.
>>>>>
>>>>> This happens because each column is an overlay over a one
>>>>> character in the line below, and it seems that the properties of
>>>>> the underlying faces are still coming through. Column one
>>>>> has the properties of character one in the line, column two that
>>>>> of character two, etc.
>>>>>
>>>>> Fixed now, I think.
>>>>>
>>>>> Why in the world would you be using a strike-through face? There
>>>>> is nothing more ugly in the world of typography than
>>>>> strike-through faces, and web sites that use it immediately get
>>>>> onto the black list of my parental control program :-)
>>>>>
>>>>> - Carsten
>>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Emacs-orgmode mailing list
>>>> Remember: use `Reply All' to send replies to the list.
>>>> Emacs-orgmode@gnu.org
>>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>
>>
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Remember: use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Underlines and strike-through lines in column view
2008-05-08 14:32 ` Wanrong Lin
@ 2008-05-15 17:40 ` Wanrong Lin
2008-05-16 7:23 ` Carsten Dominik
0 siblings, 1 reply; 15+ messages in thread
From: Wanrong Lin @ 2008-05-15 17:40 UTC (permalink / raw
To: org-mode mailing list
Feedback: I just tested again on org 6.03, and the "line noises" are
still there in the column view.
Wanrong
Wanrong Lin wrote:
>
> Just a reminder: do you have any TODO faces with strike-through lines?
> Remember the line noises will only happen when that is true.
>
> Also, maybe there are some other check-ins after your patch that fixed
> this. I only tried your patch, not the latest GIT revision. I can just
> wait until next release to test again.
>
> Thanks a lot.
>
> Wanrong
>
> Carsten Dominik wrote:
>> Hi Wanrong,
>>
>> I cannot reproduce this,, works just fine for me.
>>
>> - Carsten
>>
>> On May 8, 2008, at 12:23 AM, Wanrong Lin wrote:
>>
>>>
>>> Hi, Carsten,
>>>
>>> I just tried your patch for this fix, the column view faces are OK
>>> now, but those strike-through line noises come back again. Seems we
>>> can not get both. :-)
>>>
>>> Wanrong
>>>
>>> Carsten Dominik wrote:
>>>> Fixed, thanks.
>>>>
>>>> - Carsten
>>>>
>>>> On Apr 30, 2008, at 11:25 PM, Wanrong Lin wrote:
>>>>
>>>>> Hi, Carsten,
>>>>>
>>>>> I just tried org-mode version 6.02b, which seems to have the fix
>>>>> included. Glad those "line noises" disappeared. However, there
>>>>> seems to be some new (compared with 6.02) problems now:
>>>>>
>>>>> 1. Before the fix (6.02), faces of headings in org files are
>>>>> preserved in the column view. In 6.02b, text in column view is all
>>>>> in the same face. Can we restore the 6.02 behavior?
>>>>> 2. Customization for org-column face does not work right. Even
>>>>> though I only customized the "background" property of org-column
>>>>> face and hence expect the font stays the same as my default font
>>>>> (a bold font), but the font changes to regular (no bold text).
>>>>> Funny thing is, the sample text showed in the face customization
>>>>> window is in the correct font, but the actual font in the org file
>>>>> (column view) is not. Also even after I forced the "Weight" to be
>>>>> "bold", that still did not work. My org-column face is as following:
>>>>>
>>>>> Family: unspecified
>>>>> Width: unspecified
>>>>> Height: unspecified
>>>>> Weight: unspecified
>>>>> Slant: unspecified
>>>>> Foreground: unspecified
>>>>> Background: gray80
>>>>> Underline: unspecified
>>>>> Overline: unspecified
>>>>> Strike-through: unspecified
>>>>> Box: unspecified
>>>>> Inverse: unspecified
>>>>> Stipple: unspecified
>>>>> Font or fontset: nil
>>>>> Inherit: unspecified
>>>>>
>>>>> Thanks a lot if you can take a look of it.
>>>>>
>>>>> Wanrong
>>>>>
>>>>> Carsten Dominik wrote:
>>>>>>
>>>>>> On Apr 24, 2008, at 4:55 PM, Wanrong Lin wrote:
>>>>>>> Hi,
>>>>>>>
>>>>>>> In the column view, I often see some underlines and
>>>>>>> strike-through lines that show up kind of randomly. I have seen
>>>>>>> this for quite sometime, maybe since I began to use the column
>>>>>>> view 3 or 4 months ago. Are there any special meanings for those
>>>>>>> lines or they are just noise? I am now using Emacs 22.2 (on
>>>>>>> windows) and org-6.02. Thank you.
>>>>>>
>>>>>> This happens because each column is an overlay over a one
>>>>>> character in the line below, and it seems that the properties of
>>>>>> the underlying faces are still coming through. Column one
>>>>>> has the properties of character one in the line, column two that
>>>>>> of character two, etc.
>>>>>>
>>>>>> Fixed now, I think.
>>>>>>
>>>>>> Why in the world would you be using a strike-through face? There
>>>>>> is nothing more ugly in the world of typography than
>>>>>> strike-through faces, and web sites that use it immediately get
>>>>>> onto the black list of my parental control program :-)
>>>>>>
>>>>>> - Carsten
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Emacs-orgmode mailing list
>>>>> Remember: use `Reply All' to send replies to the list.
>>>>> Emacs-orgmode@gnu.org
>>>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Remember: use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Underlines and strike-through lines in column view
2008-05-15 17:40 ` Wanrong Lin
@ 2008-05-16 7:23 ` Carsten Dominik
2008-05-16 14:52 ` Wanrong Lin
0 siblings, 1 reply; 15+ messages in thread
From: Carsten Dominik @ 2008-05-16 7:23 UTC (permalink / raw
To: Wanrong Lin; +Cc: org-mode mailing list
Hi Wanrong,
I have lost track a bit of the details, so in order to fix this, can
you please make me a test case with a minimal .emacs that contrains
your face definitions, and a small example file. Please make it work
so that
emacs -q -l minimal.emacs
will reproduce the problem. Please also include the exact version of
Emacs you are using.
Thanks.
- Carsten
On May 15, 2008, at 7:40 PM, Wanrong Lin wrote:
>
> Feedback: I just tested again on org 6.03, and the "line noises" are
> still there in the column view.
>
> Wanrong
>
> Wanrong Lin wrote:
>>
>> Just a reminder: do you have any TODO faces with strike-through
>> lines? Remember the line noises will only happen when that is true.
>>
>> Also, maybe there are some other check-ins after your patch that
>> fixed this. I only tried your patch, not the latest GIT revision. I
>> can just wait until next release to test again.
>>
>> Thanks a lot.
>>
>> Wanrong
>>
>> Carsten Dominik wrote:
>>> Hi Wanrong,
>>>
>>> I cannot reproduce this,, works just fine for me.
>>>
>>> - Carsten
>>>
>>> On May 8, 2008, at 12:23 AM, Wanrong Lin wrote:
>>>
>>>>
>>>> Hi, Carsten,
>>>>
>>>> I just tried your patch for this fix, the column view faces are
>>>> OK now, but those strike-through line noises come back again.
>>>> Seems we can not get both. :-)
>>>>
>>>> Wanrong
>>>>
>>>> Carsten Dominik wrote:
>>>>> Fixed, thanks.
>>>>>
>>>>> - Carsten
>>>>>
>>>>> On Apr 30, 2008, at 11:25 PM, Wanrong Lin wrote:
>>>>>
>>>>>> Hi, Carsten,
>>>>>>
>>>>>> I just tried org-mode version 6.02b, which seems to have the
>>>>>> fix included. Glad those "line noises" disappeared. However,
>>>>>> there seems to be some new (compared with 6.02) problems now:
>>>>>>
>>>>>> 1. Before the fix (6.02), faces of headings in org files are
>>>>>> preserved in the column view. In 6.02b, text in column view is
>>>>>> all in the same face. Can we restore the 6.02 behavior?
>>>>>> 2. Customization for org-column face does not work right. Even
>>>>>> though I only customized the "background" property of org-
>>>>>> column face and hence expect the font stays the same as my
>>>>>> default font (a bold font), but the font changes to regular (no
>>>>>> bold text). Funny thing is, the sample text showed in the face
>>>>>> customization window is in the correct font, but the actual
>>>>>> font in the org file (column view) is not. Also even after I
>>>>>> forced the "Weight" to be "bold", that still did not work. My
>>>>>> org-column face is as following:
>>>>>>
>>>>>> Family: unspecified
>>>>>> Width: unspecified
>>>>>> Height: unspecified
>>>>>> Weight: unspecified
>>>>>> Slant: unspecified
>>>>>> Foreground: unspecified
>>>>>> Background: gray80
>>>>>> Underline: unspecified
>>>>>> Overline: unspecified
>>>>>> Strike-through: unspecified
>>>>>> Box: unspecified
>>>>>> Inverse: unspecified
>>>>>> Stipple: unspecified
>>>>>> Font or fontset: nil
>>>>>> Inherit: unspecified
>>>>>>
>>>>>> Thanks a lot if you can take a look of it.
>>>>>>
>>>>>> Wanrong
>>>>>>
>>>>>> Carsten Dominik wrote:
>>>>>>>
>>>>>>> On Apr 24, 2008, at 4:55 PM, Wanrong Lin wrote:
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> In the column view, I often see some underlines and strike-
>>>>>>>> through lines that show up kind of randomly. I have seen this
>>>>>>>> for quite sometime, maybe since I began to use the column
>>>>>>>> view 3 or 4 months ago. Are there any special meanings for
>>>>>>>> those lines or they are just noise? I am now using Emacs 22.2
>>>>>>>> (on windows) and org-6.02. Thank you.
>>>>>>>
>>>>>>> This happens because each column is an overlay over a one
>>>>>>> character in the line below, and it seems that the properties
>>>>>>> of the underlying faces are still coming through. Column one
>>>>>>> has the properties of character one in the line, column two
>>>>>>> that of character two, etc.
>>>>>>>
>>>>>>> Fixed now, I think.
>>>>>>>
>>>>>>> Why in the world would you be using a strike-through face?
>>>>>>> There is nothing more ugly in the world of typography than
>>>>>>> strike-through faces, and web sites that use it immediately
>>>>>>> get onto the black list of my parental control program :-)
>>>>>>>
>>>>>>> - Carsten
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Emacs-orgmode mailing list
>>>>>> Remember: use `Reply All' to send replies to the list.
>>>>>> Emacs-orgmode@gnu.org
>>>>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Emacs-orgmode mailing list
>>>> Remember: use `Reply All' to send replies to the list.
>>>> Emacs-orgmode@gnu.org
>>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>
>>
>>
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Underlines and strike-through lines in column view
2008-05-16 7:23 ` Carsten Dominik
@ 2008-05-16 14:52 ` Wanrong Lin
2008-05-16 15:20 ` Carsten Dominik
0 siblings, 1 reply; 15+ messages in thread
From: Wanrong Lin @ 2008-05-16 14:52 UTC (permalink / raw
Cc: org-mode mailing list
[-- Attachment #1: Type: text/plain, Size: 1802 bytes --]
Hi Carsten,
Attached is a minim emacs config file I made that can reproduce the
problem using "emacs -q -l minimal.el". The first line of the file add
the load-path to the org-mode package, so you may need to change it.
Also attached is a simple two-line org-file that you can open to see the
problem in column-view. My face settings are for light background.
Besides those strike-through lines and underlines, I also noticed that
there is a light gray vertical line in the "PRI" column. It has
something to do with my use of "box" face for org-column, but I wonder
whether that can get fixed together, as those strike-through and
underlines start right from that vertical line.
I am using the official GNU Emacs 22.2 on Windows XP.
Thanks a lot for looking into this.
Wanrong
Carsten Dominik wrote:
> Hi Wanrong,
>
> I have lost track a bit of the details, so in order to fix this, can
> you please make me a test case with a minimal .emacs that contrains
> your face definitions, and a small example file. Please make it work
> so that
>
> emacs -q -l minimal.emacs
>
> will reproduce the problem. Please also include the exact version of
> Emacs you are using.
>
> Thanks.
>
> - Carsten
>
> On May 15, 2008, at 7:40 PM, Wanrong Lin wrote:
>
>>
>> Feedback: I just tested again on org 6.03, and the "line noises" are
>> still there in the column view.
>>
>> Wanrong
>>
>> Wanrong Lin wrote:
>>>
>>> Just a reminder: do you have any TODO faces with strike-through
>>> lines? Remember the line noises will only happen when that is true.
>>>
>>> Also, maybe there are some other check-ins after your patch that
>>> fixed this. I only tried your patch, not the latest GIT revision. I
>>> can just wait until next release to test again.
>>>
>>> Thanks a lot.
>>>
>>> Wanrong
>>>
[-- Attachment #2: minimal.el --]
[-- Type: text/plain, Size: 4519 bytes --]
;; org-config.el, config file for emacs org-mode
;; Time-stamp: <2008-05-16 10:42:58 linw>
;; Tested with emacs 22.1 and org-5.14
;;
;; Wanrong Lin
(setq my-local-extra-loadpath "c:/linw/.emacs-lisp/")
(add-to-list 'load-path (concat my-local-extra-loadpath "org/lisp"))
(add-to-list 'load-path (concat my-local-extra-loadpath "org/CONTRIB/lisp"))
(require 'org-install)
(add-to-list 'auto-mode-alist
'("\\.org\\'" . org-mode))
;; TODO keywords
(setq org-todo-keywords '((sequence "TODO(t)" "STARTED(s!)" "WAITING(w@/!)" "MAYBE(m/!)" "DELEGATED(g@/!)" "DEFERRED(d!/!)" "HOLD(h!/!)" "|" "DONE(x)" "CANCELED(c)")))
(custom-set-faces
;; custom-set-faces was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
'(org-level-1 ((t (:weight bold)))) ;; bold
;; normal text
;; '(org-level-2 ((t nil))) ;; normal text
;; Use the following complicated format because the above line does not work very well
;; with column view (in org-mode 5.12c)
'(org-level-2 ((((background light)) (:foreground "#000000")) ;; black (with light background)
(t (:foreground "#F0F0F0")))) ;; white (with dark background)
'(org-level-3 ((t (:foreground "#800000")))) ;; dark red
'(org-level-4 ((t (:foreground "#0000FF")))) ;; blue
'(org-level-5 ((t (:foreground "#006000")))) ;; dark green
'(org-level-6 ((t (:foreground "#B020A0")))) ;; purple
'(org-level-7 ((t (:foreground "#0060C0")))) ;; green blue
'(org-level-8 ((t (:foreground "#4030C0")))) ;; purple blue
'(org-agenda-structure ((t (:foreground "#0040C0" :weight bold)))) ;; dark green blue
'(org-agenda-date ((t (:foreground "#800000" :weight bold)))) ;; dark red
'(org-agenda-date-weekend ((t (:foreground "#006000" :weight bold)))) ;; dark green
'(org-scheduled-today ((t (:foreground "#0000FF")))) ;; bright blue
'(org-scheduled-previously ((t (:foreground "#181880")))) ;; dark green blue
'(org-upcoming-deadline ((t (:foreground "#C00000")))) ;; middle red
'(org-warning ((t (:foreground "#C00000" :weight bold)))) ;; bold middle red
'(org-todo ((t (:foreground "#B020A0" :weight bold)))) ;; purple
'(org-done ((t (:foreground "#008000" :strike-through t :weight bold)))) ;; bold dark green
;; <TODO: use "background-color" in "default-frame-alist" instead of hard coding it here>
`(org-hide ((t (:foreground "white")))) ;; same as background
'(org-table ((((class color) (min-colors 512)) (:foreground "#181880" :background "#98D0D8"))
(t (:foreground "#181880")))) ;; dark green blue
'(org-drawer ((t (:foreground "#0040C0")))) ;; dark green blue
'(org-formula ((t (:foreground "#800000")))) ;; dark red
'(org-time-grid ((t (:foreground "#B8860B")))) ;; dark golden rod
;; '(org-link ((((class color) (background light)) (:foreground "#A020F0" :underline t)))) ;; official purple
;; '(org-date ((((class color) (background light)) (:foreground "#A020F0" :underline t)))) ;; official purple
'(org-link ((t (:foreground "#5050FF" :underline t)))) ;; light blue
'(org-date ((t (:foreground "#5050FF" :underline t)))) ;; light blue
'(org-tag ((t (:foreground "#008000" :weight bold))))
'(org-code ((t (:foreground "#505050")))) ;; gray
'(org-special-keyword ((t (:foreground "#205060")))) ;; dark green blue
'(org-column ((t (:background "gray80" :box (:line-width 1 :color "grey70")))))
)
;; pale org-todo face
(defface my-org-todo-faded '((t (:inherit org-todo :foreground "#7050B8")))
"Face for to-do items in a background/faded state.")
(setq org-todo-keyword-faces
'(
("STARTED" . (:inherit org-todo :slant italic :underline t))
("WAITING" . (:inherit org-todo :slant italic :underline t))
("DELEGATED" . (:inherit org-todo :slant italic :underline t))
("DEFERRED" . (:inherit my-org-todo-faded))
("HOLD" . (:inherit my-org-todo-faded))
("MAYBE" . (:inherit my-org-todo-faded))
("CANCELED" . (:inherit my-org-todo-faded :strike-through t))))
(defface my-org-ellipsis-face '((t (:underline t :weight bold)))
"Face folding ellipsis.")
(setq org-ellipsis 'my-org-ellipsis-face)
(setq org-hide-leading-stars t)
(provide 'org-config)
;; org-config.el ends here
[-- Attachment #3: test.org --]
[-- Type: text/plain, Size: 44 bytes --]
* DONE Just a test
* STARTED Another test
[-- Attachment #4: Type: text/plain, Size: 204 bytes --]
_______________________________________________
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Underlines and strike-through lines in column view
2008-05-16 14:52 ` Wanrong Lin
@ 2008-05-16 15:20 ` Carsten Dominik
2008-05-16 15:26 ` Carsten Dominik
0 siblings, 1 reply; 15+ messages in thread
From: Carsten Dominik @ 2008-05-16 15:20 UTC (permalink / raw
To: Wanrong Lin; +Cc: org-mode mailing list
Hi Wanrong,
the org-column face should explicitly mask all face properties that
should not shine through into the column view. Therefore, the default
org-column face has explicitly
:underline nil :strike-through nil
and now, after looking at your config, it will also get
:slant normal
Your configured org-column face does not set these attributes, so
whatever is below will shine through.
Phew, finally this is resolved. Please customize the face and change
the face accordingly.
- Carsten
On May 16, 2008, at 4:52 PM, Wanrong Lin wrote:
>
> Hi Carsten,
>
> Attached is a minim emacs config file I made that can reproduce the
> problem using "emacs -q -l minimal.el". The first line of the file
> add the load-path to the org-mode package, so you may need to change
> it. Also attached is a simple two-line org-file that you can open to
> see the problem in column-view. My face settings are for light
> background.
>
> Besides those strike-through lines and underlines, I also noticed
> that there is a light gray vertical line in the "PRI" column. It has
> something to do with my use of "box" face for org-column, but I
> wonder whether that can get fixed together, as those strike-through
> and underlines start right from that vertical line.
>
> I am using the official GNU Emacs 22.2 on Windows XP.
>
> Thanks a lot for looking into this.
>
> Wanrong
>
>
> Carsten Dominik wrote:
>> Hi Wanrong,
>>
>> I have lost track a bit of the details, so in order to fix this, can
>> you please make me a test case with a minimal .emacs that contrains
>> your face definitions, and a small example file. Please make it
>> work so that
>>
>> emacs -q -l minimal.emacs
>>
>> will reproduce the problem. Please also include the exact version
>> of Emacs you are using.
>>
>> Thanks.
>>
>> - Carsten
>>
>> On May 15, 2008, at 7:40 PM, Wanrong Lin wrote:
>>
>>>
>>> Feedback: I just tested again on org 6.03, and the "line noises"
>>> are still there in the column view.
>>>
>>> Wanrong
>>>
>>> Wanrong Lin wrote:
>>>>
>>>> Just a reminder: do you have any TODO faces with strike-through
>>>> lines? Remember the line noises will only happen when that is true.
>>>>
>>>> Also, maybe there are some other check-ins after your patch that
>>>> fixed this. I only tried your patch, not the latest GIT revision.
>>>> I can just wait until next release to test again.
>>>>
>>>> Thanks a lot.
>>>>
>>>> Wanrong
>>>>
>
> ;; org-config.el, config file for emacs org-mode
> ;; Time-stamp: <2008-05-16 10:42:58 linw>
> ;; Tested with emacs 22.1 and org-5.14
> ;;
> ;; Wanrong Lin
>
> (setq my-local-extra-loadpath "c:/linw/.emacs-lisp/")
> (add-to-list 'load-path (concat my-local-extra-loadpath "org/lisp"))
> (add-to-list 'load-path (concat my-local-extra-loadpath "org/CONTRIB/
> lisp"))
>
> (require 'org-install)
>
> (add-to-list 'auto-mode-alist
> '("\\.org\\'" . org-mode))
>
> ;; TODO keywords
> (setq org-todo-keywords '((sequence "TODO(t)" "STARTED(s!)"
> "WAITING(w@/!)" "MAYBE(m/!)" "DELEGATED(g@/!)" "DEFERRED(d!/!)"
> "HOLD(h!/!)" "|" "DONE(x)" "CANCELED(c)")))
> (custom-set-faces
> ;; custom-set-faces was added by Custom.
> ;; If you edit it by hand, you could mess it up, so be careful.
> ;; Your init file should contain only one such instance.
> ;; If there is more than one, they won't work right.
>
> '(org-level-1 ((t (:weight bold)))) ;; bold
>
> ;; normal text
> ;; '(org-level-2 ((t nil))) ;; normal text
> ;; Use the following complicated format because the above line does
> not work very well
> ;; with column view (in org-mode 5.12c)
> '(org-level-2 ((((background light)) (:foreground "#000000")) ;;
> black (with light background)
> (t (:foreground "#F0F0F0")))) ;;
> white (with dark background)
>
> '(org-level-3 ((t (:foreground "#800000")))) ;;
> dark red
> '(org-level-4 ((t (:foreground "#0000FF")))) ;; blue
> '(org-level-5 ((t (:foreground "#006000")))) ;;
> dark green
> '(org-level-6 ((t (:foreground "#B020A0")))) ;;
> purple
> '(org-level-7 ((t (:foreground "#0060C0")))) ;;
> green blue
> '(org-level-8 ((t (:foreground "#4030C0")))) ;;
> purple blue
>
> '(org-agenda-structure ((t (:foreground "#0040C0" :weight
> bold)))) ;; dark green blue
> '(org-agenda-date ((t (:foreground "#800000" :weight bold)))) ;;
> dark red
> '(org-agenda-date-weekend ((t (:foreground "#006000" :weight
> bold)))) ;; dark green
> '(org-scheduled-today ((t (:foreground "#0000FF")))) ;; bright blue
> '(org-scheduled-previously ((t (:foreground "#181880")))) ;; dark
> green blue
> '(org-upcoming-deadline ((t (:foreground "#C00000")))) ;; middle red
> '(org-warning ((t (:foreground "#C00000" :weight bold)))) ;; bold
> middle red
> '(org-todo ((t (:foreground "#B020A0" :weight bold)))) ;; purple
> '(org-done ((t (:foreground "#008000" :strike-through t :weight
> bold)))) ;; bold dark green
> ;; <TODO: use "background-color" in "default-frame-alist" instead of
> hard coding it here>
> `(org-hide ((t (:foreground "white")))) ;; same as background
> '(org-table ((((class color) (min-colors 512)) (:foreground
> "#181880" :background "#98D0D8"))
> (t (:foreground "#181880")))) ;; dark green blue
> '(org-drawer ((t (:foreground "#0040C0")))) ;; dark green blue
> '(org-formula ((t (:foreground "#800000")))) ;; dark red
> '(org-time-grid ((t (:foreground "#B8860B")))) ;; dark golden rod
> ;; '(org-link ((((class color) (background light)) (:foreground
> "#A020F0" :underline t)))) ;; official purple
> ;; '(org-date ((((class color) (background light)) (:foreground
> "#A020F0" :underline t)))) ;; official purple
> '(org-link ((t (:foreground "#5050FF" :underline t)))) ;; light blue
> '(org-date ((t (:foreground "#5050FF" :underline t)))) ;; light blue
> '(org-tag ((t (:foreground "#008000" :weight bold))))
> '(org-code ((t (:foreground "#505050")))) ;; gray
> '(org-special-keyword ((t (:foreground "#205060")))) ;; dark green
> blue
> '(org-column ((t (:background "gray80" :box (:line-width 1 :color
> "grey70")))))
> )
>
> ;; pale org-todo face
> (defface my-org-todo-faded '((t (:inherit org-todo :foreground
> "#7050B8")))
> "Face for to-do items in a background/faded state.")
>
> (setq org-todo-keyword-faces
> '(
> ("STARTED" . (:inherit org-todo :slant italic :underline
> t))
> ("WAITING" . (:inherit org-todo :slant italic :underline
> t))
> ("DELEGATED" . (:inherit org-todo :slant italic :underline
> t))
> ("DEFERRED" . (:inherit my-org-todo-faded))
> ("HOLD" . (:inherit my-org-todo-faded))
> ("MAYBE" . (:inherit my-org-todo-faded))
> ("CANCELED" . (:inherit my-org-todo-faded :strike-through
> t))))
>
> (defface my-org-ellipsis-face '((t (:underline t :weight bold)))
> "Face folding ellipsis.")
> (setq org-ellipsis 'my-org-ellipsis-face)
>
> (setq org-hide-leading-stars t)
>
>
> (provide 'org-config)
> ;; org-config.el ends here
>
> * DONE Just a test
> * STARTED Another test
>
> <mime-attachment.txt>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Underlines and strike-through lines in column view
2008-05-16 15:20 ` Carsten Dominik
@ 2008-05-16 15:26 ` Carsten Dominik
2008-05-16 15:29 ` Carsten Dominik
0 siblings, 1 reply; 15+ messages in thread
From: Carsten Dominik @ 2008-05-16 15:26 UTC (permalink / raw
To: Carsten Dominik; +Cc: org-mode mailing list
On May 16, 2008, at 5:20 PM, Carsten Dominik wrote:
> Hi Wanrong,
>
> the org-column face should explicitly mask all face properties that
> should not shine through into the column view. Therefore, the
> default org-column face has explicitly
>
> :underline nil :strike-through nil
>
> and now, after looking at your config, it will also get
>
> :slant normal
>
> Your configured org-column face does not set these attributes, so
> whatever is below will shine through.
>
> Phew, finally this is resolved. Please customize the face and
> change the face accordingly.
>
> - Carsten
P.S.
And the reason why a color shines through is because your level faces
do not specify a foreground color. So maybe you also want to specify
the foreground color of org-column, to mask that as well.
- Carsten
>
>
>
> On May 16, 2008, at 4:52 PM, Wanrong Lin wrote:
>
>>
>> Hi Carsten,
>>
>> Attached is a minim emacs config file I made that can reproduce the
>> problem using "emacs -q -l minimal.el". The first line of the file
>> add the load-path to the org-mode package, so you may need to
>> change it. Also attached is a simple two-line org-file that you can
>> open to see the problem in column-view. My face settings are for
>> light background.
>>
>> Besides those strike-through lines and underlines, I also noticed
>> that there is a light gray vertical line in the "PRI" column. It
>> has something to do with my use of "box" face for org-column, but I
>> wonder whether that can get fixed together, as those strike-through
>> and underlines start right from that vertical line.
>>
>> I am using the official GNU Emacs 22.2 on Windows XP.
>>
>> Thanks a lot for looking into this.
>>
>> Wanrong
>>
>>
>> Carsten Dominik wrote:
>>> Hi Wanrong,
>>>
>>> I have lost track a bit of the details, so in order to fix this, can
>>> you please make me a test case with a minimal .emacs that
>>> contrains your face definitions, and a small example file. Please
>>> make it work so that
>>>
>>> emacs -q -l minimal.emacs
>>>
>>> will reproduce the problem. Please also include the exact version
>>> of Emacs you are using.
>>>
>>> Thanks.
>>>
>>> - Carsten
>>>
>>> On May 15, 2008, at 7:40 PM, Wanrong Lin wrote:
>>>
>>>>
>>>> Feedback: I just tested again on org 6.03, and the "line noises"
>>>> are still there in the column view.
>>>>
>>>> Wanrong
>>>>
>>>> Wanrong Lin wrote:
>>>>>
>>>>> Just a reminder: do you have any TODO faces with strike-through
>>>>> lines? Remember the line noises will only happen when that is
>>>>> true.
>>>>>
>>>>> Also, maybe there are some other check-ins after your patch that
>>>>> fixed this. I only tried your patch, not the latest GIT
>>>>> revision. I can just wait until next release to test again.
>>>>>
>>>>> Thanks a lot.
>>>>>
>>>>> Wanrong
>>>>>
>>
>> ;; org-config.el, config file for emacs org-mode
>> ;; Time-stamp: <2008-05-16 10:42:58 linw>
>> ;; Tested with emacs 22.1 and org-5.14
>> ;;
>> ;; Wanrong Lin
>>
>> (setq my-local-extra-loadpath "c:/linw/.emacs-lisp/")
>> (add-to-list 'load-path (concat my-local-extra-loadpath "org/lisp"))
>> (add-to-list 'load-path (concat my-local-extra-loadpath "org/
>> CONTRIB/lisp"))
>>
>> (require 'org-install)
>>
>> (add-to-list 'auto-mode-alist
>> '("\\.org\\'" . org-mode))
>>
>> ;; TODO keywords
>> (setq org-todo-keywords '((sequence "TODO(t)" "STARTED(s!)"
>> "WAITING(w@/!)" "MAYBE(m/!)" "DELEGATED(g@/!)" "DEFERRED(d!/!)"
>> "HOLD(h!/!)" "|" "DONE(x)" "CANCELED(c)")))
>> (custom-set-faces
>> ;; custom-set-faces was added by Custom.
>> ;; If you edit it by hand, you could mess it up, so be careful.
>> ;; Your init file should contain only one such instance.
>> ;; If there is more than one, they won't work right.
>>
>> '(org-level-1 ((t (:weight bold)))) ;; bold
>>
>> ;; normal text
>> ;; '(org-level-2 ((t nil))) ;; normal text
>> ;; Use the following complicated format because the above line does
>> not work very well
>> ;; with column view (in org-mode 5.12c)
>> '(org-level-2 ((((background light)) (:foreground "#000000")) ;;
>> black (with light background)
>> (t (:foreground "#F0F0F0")))) ;;
>> white (with dark background)
>>
>> '(org-level-3 ((t (:foreground "#800000")))) ;;
>> dark red
>> '(org-level-4 ((t (:foreground "#0000FF")))) ;; blue
>> '(org-level-5 ((t (:foreground "#006000")))) ;;
>> dark green
>> '(org-level-6 ((t (:foreground "#B020A0")))) ;;
>> purple
>> '(org-level-7 ((t (:foreground "#0060C0")))) ;;
>> green blue
>> '(org-level-8 ((t (:foreground "#4030C0")))) ;;
>> purple blue
>>
>> '(org-agenda-structure ((t (:foreground "#0040C0" :weight
>> bold)))) ;; dark green blue
>> '(org-agenda-date ((t (:foreground "#800000" :weight bold)))) ;;
>> dark red
>> '(org-agenda-date-weekend ((t (:foreground "#006000" :weight
>> bold)))) ;; dark green
>> '(org-scheduled-today ((t (:foreground "#0000FF")))) ;; bright blue
>> '(org-scheduled-previously ((t (:foreground "#181880")))) ;; dark
>> green blue
>> '(org-upcoming-deadline ((t (:foreground "#C00000")))) ;; middle red
>> '(org-warning ((t (:foreground "#C00000" :weight bold)))) ;; bold
>> middle red
>> '(org-todo ((t (:foreground "#B020A0" :weight bold)))) ;; purple
>> '(org-done ((t (:foreground "#008000" :strike-through t :weight
>> bold)))) ;; bold dark green
>> ;; <TODO: use "background-color" in "default-frame-alist" instead
>> of hard coding it here>
>> `(org-hide ((t (:foreground "white")))) ;; same as background
>> '(org-table ((((class color) (min-colors 512)) (:foreground
>> "#181880" :background "#98D0D8"))
>> (t (:foreground "#181880")))) ;; dark green blue
>> '(org-drawer ((t (:foreground "#0040C0")))) ;; dark green blue
>> '(org-formula ((t (:foreground "#800000")))) ;; dark red
>> '(org-time-grid ((t (:foreground "#B8860B")))) ;; dark golden rod
>> ;; '(org-link ((((class color) (background light)) (:foreground
>> "#A020F0" :underline t)))) ;; official purple
>> ;; '(org-date ((((class color) (background light)) (:foreground
>> "#A020F0" :underline t)))) ;; official purple
>> '(org-link ((t (:foreground "#5050FF" :underline t)))) ;; light blue
>> '(org-date ((t (:foreground "#5050FF" :underline t)))) ;; light blue
>> '(org-tag ((t (:foreground "#008000" :weight bold))))
>> '(org-code ((t (:foreground "#505050")))) ;; gray
>> '(org-special-keyword ((t (:foreground "#205060")))) ;; dark green
>> blue
>> '(org-column ((t (:background "gray80" :box (:line-width 1 :color
>> "grey70")))))
>> )
>>
>> ;; pale org-todo face
>> (defface my-org-todo-faded '((t (:inherit org-todo :foreground
>> "#7050B8")))
>> "Face for to-do items in a background/faded state.")
>>
>> (setq org-todo-keyword-faces
>> '(
>> ("STARTED" . (:inherit org-todo :slant italic :underline
>> t))
>> ("WAITING" . (:inherit org-todo :slant italic :underline
>> t))
>> ("DELEGATED" . (:inherit org-todo :slant italic :underline
>> t))
>> ("DEFERRED" . (:inherit my-org-todo-faded))
>> ("HOLD" . (:inherit my-org-todo-faded))
>> ("MAYBE" . (:inherit my-org-todo-faded))
>> ("CANCELED" . (:inherit my-org-todo-faded :strike-through
>> t))))
>>
>> (defface my-org-ellipsis-face '((t (:underline t :weight bold)))
>> "Face folding ellipsis.")
>> (setq org-ellipsis 'my-org-ellipsis-face)
>>
>> (setq org-hide-leading-stars t)
>>
>>
>> (provide 'org-config)
>> ;; org-config.el ends here
>>
>> * DONE Just a test
>> * STARTED Another test
>>
>> <mime-attachment.txt>
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Underlines and strike-through lines in column view
2008-05-16 15:26 ` Carsten Dominik
@ 2008-05-16 15:29 ` Carsten Dominik
2008-05-16 16:41 ` Wanrong Lin
0 siblings, 1 reply; 15+ messages in thread
From: Carsten Dominik @ 2008-05-16 15:29 UTC (permalink / raw
To: Carsten Dominik; +Cc: org-mode mailing list
On May 16, 2008, at 5:26 PM, Carsten Dominik wrote:
> On May 16, 2008, at 5:20 PM, Carsten Dominik wrote:
>
>> Hi Wanrong,
>>
>> the org-column face should explicitly mask all face properties that
>> should not shine through into the column view. Therefore, the
>> default org-column face has explicitly
>>
>> :underline nil :strike-through nil
>>
>> and now, after looking at your config, it will also get
>>
>> :slant normal
>>
>> Your configured org-column face does not set these attributes, so
>> whatever is below will shine through.
>>
>> Phew, finally this is resolved. Please customize the face and
>> change the face accordingly.
>>
>> - Carsten
>
> P.S.
>
> And the reason why a color shines through is because your level
> faces do not specify a foreground color. So maybe you also want to
> specify the foreground color of org-column, to mask that as well.
>
> - Carsten
P.P.S. Sorry for posting in pieces. You can also fix the color by
specifying the color also for your level-1... faces, depending on if
you want the level color, or a standard color in column view.
- Carsten
>
>
>>
>>
>>
>> On May 16, 2008, at 4:52 PM, Wanrong Lin wrote:
>>
>>>
>>> Hi Carsten,
>>>
>>> Attached is a minim emacs config file I made that can reproduce
>>> the problem using "emacs -q -l minimal.el". The first line of the
>>> file add the load-path to the org-mode package, so you may need to
>>> change it. Also attached is a simple two-line org-file that you
>>> can open to see the problem in column-view. My face settings are
>>> for light background.
>>>
>>> Besides those strike-through lines and underlines, I also noticed
>>> that there is a light gray vertical line in the "PRI" column. It
>>> has something to do with my use of "box" face for org-column, but
>>> I wonder whether that can get fixed together, as those strike-
>>> through and underlines start right from that vertical line.
>>>
>>> I am using the official GNU Emacs 22.2 on Windows XP.
>>>
>>> Thanks a lot for looking into this.
>>>
>>> Wanrong
>>>
>>>
>>> Carsten Dominik wrote:
>>>> Hi Wanrong,
>>>>
>>>> I have lost track a bit of the details, so in order to fix this,
>>>> can
>>>> you please make me a test case with a minimal .emacs that
>>>> contrains your face definitions, and a small example file.
>>>> Please make it work so that
>>>>
>>>> emacs -q -l minimal.emacs
>>>>
>>>> will reproduce the problem. Please also include the exact
>>>> version of Emacs you are using.
>>>>
>>>> Thanks.
>>>>
>>>> - Carsten
>>>>
>>>> On May 15, 2008, at 7:40 PM, Wanrong Lin wrote:
>>>>
>>>>>
>>>>> Feedback: I just tested again on org 6.03, and the "line noises"
>>>>> are still there in the column view.
>>>>>
>>>>> Wanrong
>>>>>
>>>>> Wanrong Lin wrote:
>>>>>>
>>>>>> Just a reminder: do you have any TODO faces with strike-through
>>>>>> lines? Remember the line noises will only happen when that is
>>>>>> true.
>>>>>>
>>>>>> Also, maybe there are some other check-ins after your patch
>>>>>> that fixed this. I only tried your patch, not the latest GIT
>>>>>> revision. I can just wait until next release to test again.
>>>>>>
>>>>>> Thanks a lot.
>>>>>>
>>>>>> Wanrong
>>>>>>
>>>
>>> ;; org-config.el, config file for emacs org-mode
>>> ;; Time-stamp: <2008-05-16 10:42:58 linw>
>>> ;; Tested with emacs 22.1 and org-5.14
>>> ;;
>>> ;; Wanrong Lin
>>>
>>> (setq my-local-extra-loadpath "c:/linw/.emacs-lisp/")
>>> (add-to-list 'load-path (concat my-local-extra-loadpath "org/lisp"))
>>> (add-to-list 'load-path (concat my-local-extra-loadpath "org/
>>> CONTRIB/lisp"))
>>>
>>> (require 'org-install)
>>>
>>> (add-to-list 'auto-mode-alist
>>> '("\\.org\\'" . org-mode))
>>>
>>> ;; TODO keywords
>>> (setq org-todo-keywords '((sequence "TODO(t)" "STARTED(s!)"
>>> "WAITING(w@/!)" "MAYBE(m/!)" "DELEGATED(g@/!)" "DEFERRED(d!/!)"
>>> "HOLD(h!/!)" "|" "DONE(x)" "CANCELED(c)")))
>>> (custom-set-faces
>>> ;; custom-set-faces was added by Custom.
>>> ;; If you edit it by hand, you could mess it up, so be careful.
>>> ;; Your init file should contain only one such instance.
>>> ;; If there is more than one, they won't work right.
>>>
>>> '(org-level-1 ((t (:weight bold)))) ;;
>>> bold
>>>
>>> ;; normal text
>>> ;; '(org-level-2 ((t nil))) ;; normal text
>>> ;; Use the following complicated format because the above line
>>> does not work very well
>>> ;; with column view (in org-mode 5.12c)
>>> '(org-level-2 ((((background light)) (:foreground "#000000")) ;;
>>> black (with light background)
>>> (t (:foreground "#F0F0F0")))) ;;
>>> white (with dark background)
>>>
>>> '(org-level-3 ((t (:foreground "#800000")))) ;;
>>> dark red
>>> '(org-level-4 ((t (:foreground "#0000FF")))) ;;
>>> blue
>>> '(org-level-5 ((t (:foreground "#006000")))) ;;
>>> dark green
>>> '(org-level-6 ((t (:foreground "#B020A0")))) ;;
>>> purple
>>> '(org-level-7 ((t (:foreground "#0060C0")))) ;;
>>> green blue
>>> '(org-level-8 ((t (:foreground "#4030C0")))) ;;
>>> purple blue
>>>
>>> '(org-agenda-structure ((t (:foreground "#0040C0" :weight
>>> bold)))) ;; dark green blue
>>> '(org-agenda-date ((t (:foreground "#800000" :weight bold)))) ;;
>>> dark red
>>> '(org-agenda-date-weekend ((t (:foreground "#006000" :weight
>>> bold)))) ;; dark green
>>> '(org-scheduled-today ((t (:foreground "#0000FF")))) ;; bright blue
>>> '(org-scheduled-previously ((t (:foreground "#181880")))) ;; dark
>>> green blue
>>> '(org-upcoming-deadline ((t (:foreground "#C00000")))) ;; middle red
>>> '(org-warning ((t (:foreground "#C00000" :weight bold)))) ;; bold
>>> middle red
>>> '(org-todo ((t (:foreground "#B020A0" :weight bold)))) ;; purple
>>> '(org-done ((t (:foreground "#008000" :strike-through t :weight
>>> bold)))) ;; bold dark green
>>> ;; <TODO: use "background-color" in "default-frame-alist" instead
>>> of hard coding it here>
>>> `(org-hide ((t (:foreground "white")))) ;; same as background
>>> '(org-table ((((class color) (min-colors 512)) (:foreground
>>> "#181880" :background "#98D0D8"))
>>> (t (:foreground "#181880")))) ;; dark green blue
>>> '(org-drawer ((t (:foreground "#0040C0")))) ;; dark green blue
>>> '(org-formula ((t (:foreground "#800000")))) ;; dark red
>>> '(org-time-grid ((t (:foreground "#B8860B")))) ;; dark golden rod
>>> ;; '(org-link ((((class color) (background light)) (:foreground
>>> "#A020F0" :underline t)))) ;; official purple
>>> ;; '(org-date ((((class color) (background light)) (:foreground
>>> "#A020F0" :underline t)))) ;; official purple
>>> '(org-link ((t (:foreground "#5050FF" :underline t)))) ;; light blue
>>> '(org-date ((t (:foreground "#5050FF" :underline t)))) ;; light blue
>>> '(org-tag ((t (:foreground "#008000" :weight bold))))
>>> '(org-code ((t (:foreground "#505050")))) ;; gray
>>> '(org-special-keyword ((t (:foreground "#205060")))) ;; dark green
>>> blue
>>> '(org-column ((t (:background "gray80" :box (:line-width 1 :color
>>> "grey70")))))
>>> )
>>>
>>> ;; pale org-todo face
>>> (defface my-org-todo-faded '((t (:inherit org-todo :foreground
>>> "#7050B8")))
>>> "Face for to-do items in a background/faded state.")
>>>
>>> (setq org-todo-keyword-faces
>>> '(
>>> ("STARTED" . (:inherit org-todo :slant italic :underline
>>> t))
>>> ("WAITING" . (:inherit org-todo :slant italic :underline
>>> t))
>>> ("DELEGATED" . (:inherit org-todo :slant italic :underline
>>> t))
>>> ("DEFERRED" . (:inherit my-org-todo-faded))
>>> ("HOLD" . (:inherit my-org-todo-faded))
>>> ("MAYBE" . (:inherit my-org-todo-faded))
>>> ("CANCELED" . (:inherit my-org-todo-faded :strike-through
>>> t))))
>>>
>>> (defface my-org-ellipsis-face '((t (:underline t :weight bold)))
>>> "Face folding ellipsis.")
>>> (setq org-ellipsis 'my-org-ellipsis-face)
>>>
>>> (setq org-hide-leading-stars t)
>>>
>>>
>>> (provide 'org-config)
>>> ;; org-config.el ends here
>>>
>>> * DONE Just a test
>>> * STARTED Another test
>>>
>>> <mime-attachment.txt>
>>
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Remember: use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Underlines and strike-through lines in column view
2008-05-16 15:29 ` Carsten Dominik
@ 2008-05-16 16:41 ` Wanrong Lin
0 siblings, 0 replies; 15+ messages in thread
From: Wanrong Lin @ 2008-05-16 16:41 UTC (permalink / raw
Cc: org-mode mailing list
Hi, Carsten,
Yes, your solution solved my problem!
Actually I prefer to have the headings' color shine through in the
column view so I can easily tell at which level they are. Just by
changing my org-column face to the following:
'(org-column ((t (:background "gray80" :underline "gray60"
:strike-through nil :slant normal))))
all works fine now.
Thank you so much!
Wanrong
Carsten Dominik wrote:
>
> On May 16, 2008, at 5:26 PM, Carsten Dominik wrote:
>
>> On May 16, 2008, at 5:20 PM, Carsten Dominik wrote:
>>
>>> Hi Wanrong,
>>>
>>> the org-column face should explicitly mask all face properties that
>>> should not shine through into the column view. Therefore, the
>>> default org-column face has explicitly
>>>
>>> :underline nil :strike-through nil
>>>
>>> and now, after looking at your config, it will also get
>>>
>>> :slant normal
>>>
>>> Your configured org-column face does not set these attributes, so
>>> whatever is below will shine through.
>>>
>>> Phew, finally this is resolved. Please customize the face and
>>> change the face accordingly.
>>>
>>> - Carsten
>>
>> P.S.
>>
>> And the reason why a color shines through is because your level faces
>> do not specify a foreground color. So maybe you also want to specify
>> the foreground color of org-column, to mask that as well.
>>
>> - Carsten
>
> P.P.S. Sorry for posting in pieces. You can also fix the color by
> specifying the color also for your level-1... faces, depending on if
> you want the level color, or a standard color in column view.
>
> - Carsten
>
>>
>>
>>>
>>>
>>>
>>> On May 16, 2008, at 4:52 PM, Wanrong Lin wrote:
>>>
>>>>
>>>> Hi Carsten,
>>>>
>>>> Attached is a minim emacs config file I made that can reproduce the
>>>> problem using "emacs -q -l minimal.el". The first line of the file
>>>> add the load-path to the org-mode package, so you may need to
>>>> change it. Also attached is a simple two-line org-file that you can
>>>> open to see the problem in column-view. My face settings are for
>>>> light background.
>>>>
>>>> Besides those strike-through lines and underlines, I also noticed
>>>> that there is a light gray vertical line in the "PRI" column. It
>>>> has something to do with my use of "box" face for org-column, but I
>>>> wonder whether that can get fixed together, as those strike-through
>>>> and underlines start right from that vertical line.
>>>>
>>>> I am using the official GNU Emacs 22.2 on Windows XP.
>>>>
>>>> Thanks a lot for looking into this.
>>>>
>>>> Wanrong
>>>>
>>>>
>>>> Carsten Dominik wrote:
>>>>> Hi Wanrong,
>>>>>
>>>>> I have lost track a bit of the details, so in order to fix this, can
>>>>> you please make me a test case with a minimal .emacs that
>>>>> contrains your face definitions, and a small example file. Please
>>>>> make it work so that
>>>>>
>>>>> emacs -q -l minimal.emacs
>>>>>
>>>>> will reproduce the problem. Please also include the exact version
>>>>> of Emacs you are using.
>>>>>
>>>>> Thanks.
>>>>>
>>>>> - Carsten
>>>>>
>>>>> On May 15, 2008, at 7:40 PM, Wanrong Lin wrote:
>>>>>
>>>>>>
>>>>>> Feedback: I just tested again on org 6.03, and the "line noises"
>>>>>> are still there in the column view.
>>>>>>
>>>>>> Wanrong
>>>>>>
>>>>>> Wanrong Lin wrote:
>>>>>>>
>>>>>>> Just a reminder: do you have any TODO faces with strike-through
>>>>>>> lines? Remember the line noises will only happen when that is true.
>>>>>>>
>>>>>>> Also, maybe there are some other check-ins after your patch that
>>>>>>> fixed this. I only tried your patch, not the latest GIT
>>>>>>> revision. I can just wait until next release to test again.
>>>>>>>
>>>>>>> Thanks a lot.
>>>>>>>
>>>>>>> Wanrong
>>>>>>>
>>>>
>>>> ;; org-config.el, config file for emacs org-mode
>>>> ;; Time-stamp: <2008-05-16 10:42:58 linw>
>>>> ;; Tested with emacs 22.1 and org-5.14
>>>> ;;
>>>> ;; Wanrong Lin
>>>>
>>>> (setq my-local-extra-loadpath "c:/linw/.emacs-lisp/")
>>>> (add-to-list 'load-path (concat my-local-extra-loadpath "org/lisp"))
>>>> (add-to-list 'load-path (concat my-local-extra-loadpath
>>>> "org/CONTRIB/lisp"))
>>>>
>>>> (require 'org-install)
>>>>
>>>> (add-to-list 'auto-mode-alist
>>>> '("\\.org\\'" . org-mode))
>>>>
>>>> ;; TODO keywords
>>>> (setq org-todo-keywords '((sequence "TODO(t)" "STARTED(s!)"
>>>> "WAITING(w@/!)" "MAYBE(m/!)" "DELEGATED(g@/!)" "DEFERRED(d!/!)"
>>>> "HOLD(h!/!)" "|" "DONE(x)" "CANCELED(c)")))
>>>> (custom-set-faces
>>>> ;; custom-set-faces was added by Custom.
>>>> ;; If you edit it by hand, you could mess it up, so be careful.
>>>> ;; Your init file should contain only one such instance.
>>>> ;; If there is more than one, they won't work right.
>>>>
>>>> '(org-level-1 ((t (:weight bold)))) ;; bold
>>>>
>>>> ;; normal text
>>>> ;; '(org-level-2 ((t nil))) ;; normal text
>>>> ;; Use the following complicated format because the above line does
>>>> not work very well
>>>> ;; with column view (in org-mode 5.12c)
>>>> '(org-level-2 ((((background light)) (:foreground "#000000")) ;;
>>>> black (with light background)
>>>> (t (:foreground "#F0F0F0")))) ;;
>>>> white (with dark background)
>>>>
>>>> '(org-level-3 ((t (:foreground "#800000")))) ;;
>>>> dark red
>>>> '(org-level-4 ((t (:foreground "#0000FF")))) ;; blue
>>>> '(org-level-5 ((t (:foreground "#006000")))) ;;
>>>> dark green
>>>> '(org-level-6 ((t (:foreground "#B020A0")))) ;;
>>>> purple
>>>> '(org-level-7 ((t (:foreground "#0060C0")))) ;;
>>>> green blue
>>>> '(org-level-8 ((t (:foreground "#4030C0")))) ;;
>>>> purple blue
>>>>
>>>> '(org-agenda-structure ((t (:foreground "#0040C0" :weight bold))))
>>>> ;; dark green blue
>>>> '(org-agenda-date ((t (:foreground "#800000" :weight bold)))) ;;
>>>> dark red
>>>> '(org-agenda-date-weekend ((t (:foreground "#006000" :weight
>>>> bold)))) ;; dark green
>>>> '(org-scheduled-today ((t (:foreground "#0000FF")))) ;; bright blue
>>>> '(org-scheduled-previously ((t (:foreground "#181880")))) ;; dark
>>>> green blue
>>>> '(org-upcoming-deadline ((t (:foreground "#C00000")))) ;; middle red
>>>> '(org-warning ((t (:foreground "#C00000" :weight bold)))) ;; bold
>>>> middle red
>>>> '(org-todo ((t (:foreground "#B020A0" :weight bold)))) ;; purple
>>>> '(org-done ((t (:foreground "#008000" :strike-through t :weight
>>>> bold)))) ;; bold dark green
>>>> ;; <TODO: use "background-color" in "default-frame-alist" instead
>>>> of hard coding it here>
>>>> `(org-hide ((t (:foreground "white")))) ;; same as background
>>>> '(org-table ((((class color) (min-colors 512)) (:foreground
>>>> "#181880" :background "#98D0D8"))
>>>> (t (:foreground "#181880")))) ;; dark green blue
>>>> '(org-drawer ((t (:foreground "#0040C0")))) ;; dark green blue
>>>> '(org-formula ((t (:foreground "#800000")))) ;; dark red
>>>> '(org-time-grid ((t (:foreground "#B8860B")))) ;; dark golden rod
>>>> ;; '(org-link ((((class color) (background light)) (:foreground
>>>> "#A020F0" :underline t)))) ;; official purple
>>>> ;; '(org-date ((((class color) (background light)) (:foreground
>>>> "#A020F0" :underline t)))) ;; official purple
>>>> '(org-link ((t (:foreground "#5050FF" :underline t)))) ;; light blue
>>>> '(org-date ((t (:foreground "#5050FF" :underline t)))) ;; light blue
>>>> '(org-tag ((t (:foreground "#008000" :weight bold))))
>>>> '(org-code ((t (:foreground "#505050")))) ;; gray
>>>> '(org-special-keyword ((t (:foreground "#205060")))) ;; dark green
>>>> blue
>>>> '(org-column ((t (:background "gray80" :box (:line-width 1 :color
>>>> "grey70")))))
>>>> )
>>>>
>>>> ;; pale org-todo face
>>>> (defface my-org-todo-faded '((t (:inherit org-todo :foreground
>>>> "#7050B8")))
>>>> "Face for to-do items in a background/faded state.")
>>>>
>>>> (setq org-todo-keyword-faces
>>>> '(
>>>> ("STARTED" . (:inherit org-todo :slant italic :underline t))
>>>> ("WAITING" . (:inherit org-todo :slant italic :underline t))
>>>> ("DELEGATED" . (:inherit org-todo :slant italic :underline t))
>>>> ("DEFERRED" . (:inherit my-org-todo-faded))
>>>> ("HOLD" . (:inherit my-org-todo-faded))
>>>> ("MAYBE" . (:inherit my-org-todo-faded))
>>>> ("CANCELED" . (:inherit my-org-todo-faded :strike-through
>>>> t))))
>>>>
>>>> (defface my-org-ellipsis-face '((t (:underline t :weight bold)))
>>>> "Face folding ellipsis.")
>>>> (setq org-ellipsis 'my-org-ellipsis-face)
>>>>
>>>> (setq org-hide-leading-stars t)
>>>>
>>>>
>>>> (provide 'org-config)
>>>> ;; org-config.el ends here
>>>>
>>>> * DONE Just a test
>>>> * STARTED Another test
>>>>
>>>> <mime-attachment.txt>
>>>
>>>
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Remember: use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2008-05-16 16:42 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-04-24 14:55 Underlines and strike-through lines in column view Wanrong Lin
2008-04-24 16:44 ` Jose Robins
2008-04-25 13:52 ` Carsten Dominik
2008-04-30 21:25 ` Wanrong Lin
2008-05-01 8:07 ` Carsten Dominik
2008-05-07 22:23 ` Wanrong Lin
2008-05-08 6:29 ` Carsten Dominik
2008-05-08 14:32 ` Wanrong Lin
2008-05-15 17:40 ` Wanrong Lin
2008-05-16 7:23 ` Carsten Dominik
2008-05-16 14:52 ` Wanrong Lin
2008-05-16 15:20 ` Carsten Dominik
2008-05-16 15:26 ` Carsten Dominik
2008-05-16 15:29 ` Carsten Dominik
2008-05-16 16:41 ` Wanrong Lin
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.