* Re: Emacs-orgmode Digest, Vol 30, Issue 39 [not found] <20080826151404.0996C2179B@mailhost.cs.tu-berlin.de> @ 2008-08-26 17:57 ` Stephan Schmitt 2008-08-26 18:08 ` Eric Schulte 0 siblings, 1 reply; 22+ messages in thread From: Stephan Schmitt @ 2008-08-26 17:57 UTC (permalink / raw To: emacs-orgmode, Eric Schulte Eric Schulte wrote: > On Tuesday, August 26, at 14:36, Sebastian Rose wrote: > > The buffer is modified after C-M-g and emacs asks if I want to save it. > > That is certainly something to figure out. > This happens already if you press tab with the cursor located inside a table, so this is probably an org issue. Eric, did you know that Carsten provided a function called org-table-to-lisp in org-6.06b? I think with this you can refactor your code to be more modular and thus better maintainable and extensible. Regards, Stephan ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Emacs-orgmode Digest, Vol 30, Issue 39 2008-08-26 17:57 ` Emacs-orgmode Digest, Vol 30, Issue 39 Stephan Schmitt @ 2008-08-26 18:08 ` Eric Schulte 2008-08-26 23:09 ` org-plot (generating graphs from org-mode) Eric Schulte 0 siblings, 1 reply; 22+ messages in thread From: Eric Schulte @ 2008-08-26 18:08 UTC (permalink / raw To: Stephan Schmitt; +Cc: emacs-orgmode On Tuesday, August 26, at 19:57, Stephan Schmitt wrote: > Eric Schulte wrote: > > On Tuesday, August 26, at 14:36, Sebastian Rose wrote: > > > The buffer is modified after C-M-g and emacs asks if I want to save it. > > > > That is certainly something to figure out. > > > > This happens already if you press tab with the cursor > located inside a table, so this is probably an org issue. I had been using tab `org-cycle' in some cases to position the cursor on selected columns, so that is probably the cause. > Eric, did you know that Carsten provided a function called > org-table-to-lisp in org-6.06b? I think with this you can > refactor your code to be more modular and thus better > maintainable and extensible. I was not aware of that function. It should certainly help, both in cleaning up the code, and hopefully removing the reliance on `org-cycle'. Using `org-table-to-lisp' should also eliminate the 'Not in table data field' error that Sebastian mentioned. Thanks -- Eric > Regards, > Stephan -- schulte ^ permalink raw reply [flat|nested] 22+ messages in thread
* org-plot (generating graphs from org-mode) 2008-08-26 18:08 ` Eric Schulte @ 2008-08-26 23:09 ` Eric Schulte 2008-08-27 9:30 ` Sebastian Rose ` (2 more replies) 0 siblings, 3 replies; 22+ messages in thread From: Eric Schulte @ 2008-08-26 23:09 UTC (permalink / raw To: Stephan Schmitt, emacs-orgmode On Tuesday, August 26, at 11:08, Eric Schulte wrote: > On Tuesday, August 26, at 19:57, Stephan Schmitt wrote: > > Eric, did you know that Carsten provided a function called > > org-table-to-lisp in org-6.06b? I think with this you can > > refactor your code to be more modular and thus better > > maintainable and extensible. I have switched over to using `org-table-to-lisp' for all table manipulation, and (at least in my environment), it seems to have made the graphing functions faster, and much more reliable (no longer do I have to run a function twice to generate a graph). I believe this should fix most of the bugs mentioned previously. Also, I have finished support for 3d graphing. The updated version is up on my git repo at http://github.com/eschulte/org-plot/tree/master or git clone git://github.com/eschulte/org-plot.git Of course if anyone has any comments, problems, or suggestions please let me know. Thanks -- Eric -- schulte ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-26 23:09 ` org-plot (generating graphs from org-mode) Eric Schulte @ 2008-08-27 9:30 ` Sebastian Rose 2008-08-27 15:02 ` Eric Schulte 2008-08-27 9:32 ` Sebastian Rose 2008-08-29 11:16 ` William Henney 2 siblings, 1 reply; 22+ messages in thread From: Sebastian Rose @ 2008-08-27 9:30 UTC (permalink / raw To: emacs-orgmode Hi Eric, Great! This version fixes ALL the bugs I mentioned in my previous email on emacs 23 !!! I.e. - It always renders the plot after the first C-M-g - All three tables work And it's much faster indeed! Thank's, it's fantastic :-) - Sebastian Eric Schulte wrote: > On Tuesday, August 26, at 11:08, Eric Schulte wrote: > > On Tuesday, August 26, at 19:57, Stephan Schmitt wrote: > > > Eric, did you know that Carsten provided a function called > > > org-table-to-lisp in org-6.06b? I think with this you can > > > refactor your code to be more modular and thus better > > > maintainable and extensible. > > I have switched over to using `org-table-to-lisp' for all table > manipulation, and (at least in my environment), it seems to have made > the graphing functions faster, and much more reliable (no longer do I > have to run a function twice to generate a graph). > > I believe this should fix most of the bugs mentioned previously. > > Also, I have finished support for 3d graphing. The updated version is > up on my git repo at > > http://github.com/eschulte/org-plot/tree/master > > or > > git clone git://github.com/eschulte/org-plot.git > > Of course if anyone has any comments, problems, or suggestions please > let me know. > > Thanks -- Eric > ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-27 9:30 ` Sebastian Rose @ 2008-08-27 15:02 ` Eric Schulte 0 siblings, 0 replies; 22+ messages in thread From: Eric Schulte @ 2008-08-27 15:02 UTC (permalink / raw To: sebastian_rose; +Cc: emacs-orgmode On Wednesday, August 27, at 11:30, Sebastian Rose wrote: > Hi Eric, > > > Great! This version fixes ALL the bugs I mentioned in my previous > email on emacs 23 !!! > Wonderful!! thanks for testing this out. -- schulte ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-26 23:09 ` org-plot (generating graphs from org-mode) Eric Schulte 2008-08-27 9:30 ` Sebastian Rose @ 2008-08-27 9:32 ` Sebastian Rose 2008-08-29 11:16 ` William Henney 2 siblings, 0 replies; 22+ messages in thread From: Sebastian Rose @ 2008-08-27 9:32 UTC (permalink / raw To: emacs-orgmode Hi again, Forgot to say: buffer-modified-p problem is gone too!!! Woweeee! Eric Schulte wrote: > On Tuesday, August 26, at 11:08, Eric Schulte wrote: > > On Tuesday, August 26, at 19:57, Stephan Schmitt wrote: > > > Eric, did you know that Carsten provided a function called > > > org-table-to-lisp in org-6.06b? I think with this you can > > > refactor your code to be more modular and thus better > > > maintainable and extensible. > > I have switched over to using `org-table-to-lisp' for all table > manipulation, and (at least in my environment), it seems to have made > the graphing functions faster, and much more reliable (no longer do I > have to run a function twice to generate a graph). > > I believe this should fix most of the bugs mentioned previously. > > Also, I have finished support for 3d graphing. The updated version is > up on my git repo at > > http://github.com/eschulte/org-plot/tree/master > > or > > git clone git://github.com/eschulte/org-plot.git > > Of course if anyone has any comments, problems, or suggestions please > let me know. > > Thanks -- Eric > ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-26 23:09 ` org-plot (generating graphs from org-mode) Eric Schulte 2008-08-27 9:30 ` Sebastian Rose 2008-08-27 9:32 ` Sebastian Rose @ 2008-08-29 11:16 ` William Henney 2008-08-31 18:14 ` Eric Schulte 2008-09-01 0:52 ` Eric Schulte 2 siblings, 2 replies; 22+ messages in thread From: William Henney @ 2008-08-29 11:16 UTC (permalink / raw To: Eric Schulte; +Cc: emacs-orgmode Hi Eric On Tue, Aug 26, 2008 at 6:09 PM, Eric Schulte <schulte.eric@gmail.com> wrote: > Of course if anyone has any comments, problems, or suggestions please > let me know. Org-plot is great! Thank you very much for writing this. I just found a couple of small problems, as detailed below. Cheers Will ** Bugs in org-plot *** [2008-08-28 Thu] Finding the table to plot =org-plot/goto-nearest-table= searches backward first, which means that if point is located in an options line for a following table, then it will find the previous table instead. This is usually undesired. *** [2008-08-28 Thu] Columns with multi-word text Consider the following table: #+PLOT: title:"Citas" ind:0 deps:(3) type:2d with:histograms set:"yrange [0:]" | Sede | Max cites | H-index | |-----------+-----------+---------| | Chile | 257.72 | 21.39 | | Leeds | 165.77 | 19.68 | | São Paolo | 71.00 | 11.50 | | Stockholm | 134.19 | 14.33 | | Morelia | 257.56 | 17.67 | In theory, this should plot the third column. However, the data point for São Paolo comes from the second column instead. Presumably this is because of the embedded space in "Sõo Paolo". If I replace it with a unicode non-breaking space, "São Paolo", then it works correctly. -- Dr William Henney, Centro de Radioastronomía y Astrofísica, Universidad Nacional Autónoma de México, Campus Morelia ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-29 11:16 ` William Henney @ 2008-08-31 18:14 ` Eric Schulte 2008-09-03 3:25 ` William Henney 2008-09-01 0:52 ` Eric Schulte 1 sibling, 1 reply; 22+ messages in thread From: Eric Schulte @ 2008-08-31 18:14 UTC (permalink / raw To: William Henney; +Cc: emacs-orgmode Thanks for the feedback, much appreciated. A new version of org-plot is up on the git repo http://github.com/eschulte/org-plot/tree/master detailed comments below... "William Henney" <whenney@gmail.com> writes: > *** [2008-08-28 Thu] Finding the table to plot > =org-plot/goto-nearest-table= searches backward first, which means > that if point is located in an options line for a following table, > then it will find the previous table instead. This is usually > undesired. I changed this so it no longer looks backwards > *** [2008-08-28 Thu] Columns with multi-word text > Consider the following table: > > #+PLOT: title:"Citas" ind:0 deps:(3) type:2d with:histograms set:"yrange [0:]" > | Sede | Max cites | H-index | > |-----------+-----------+---------| > | Chile | 257.72 | 21.39 | > | Leeds | 165.77 | 19.68 | > | São Paolo | 71.00 | 11.50 | > | Stockholm | 134.19 | 14.33 | > | Morelia | 257.56 | 17.67 | > > In theory, this should plot the third column. However, the data > point for São Paolo comes from the second column > instead. Presumably this is because of the embedded space in "Sõo > Paolo". If I replace it with a unicode non-breaking space, > "São Paolo", then it works correctly. you're right, I am now quoting non-text columns on export which takes care of the problem you mentioned here. Also, org-plot is now using to gnuplot `xticlabel' command to use the ind columns values as labels in the case that they are text. (for an example plot your table from above with the ind:1 option). If you don't mind, I would like to add the table you sent above to the example.org file in org-plot to demonstrate this feature. Thanks -- Eric ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-31 18:14 ` Eric Schulte @ 2008-09-03 3:25 ` William Henney 0 siblings, 0 replies; 22+ messages in thread From: William Henney @ 2008-09-03 3:25 UTC (permalink / raw To: Eric Schulte; +Cc: emacs-orgmode Hi Eric On Sun, Aug 31, 2008 at 1:14 PM, Eric Schulte <schulte.eric@gmail.com> wrote: > > Thanks for the feedback, much appreciated. A new version of org-plot is > up on the git repo http://github.com/eschulte/org-plot/tree/master > I can confirm that the new version fixes both the problems that I reported. Furthermore, the new option to use a column of text labels for the x-axis is wonderful. Thanks! > If you don't mind, I would like to add the > table you sent above to the example.org file in org-plot to demonstrate > this feature. > Yes, by all means, go ahead. I've run into a couple more minor problems that might be worth looking into if you have the time. **** Writing plot to file Two issues here: 1. The suffix of the output file must exactly match the name of a gnuplot terminal type. Thus file:"foo.jpeg" works, but file:"foo.jpg" doesn't. Similarly, one needs to use ".postscript" instead of ".ps". 2. Some terminals seem to work, but some don't (there is no error message and the ouput file is created, but it is empty): - Works :: jpeg, png, svg, postscript, mp - Fails :: pdf (OK, this seems to be the only one - weird) **** Non-ascii characters in strings These tend not to work. However, the results vary according to the output terminal in use, so I suspect that this may be due to bugs in gnuplot. My version is : G N U P L O T: : Version 4.2 patchlevel 3 : last modified Mar 2008 : System: Darwin 9.4.0 One strange thing is that, even if the .org file is utf8, the graphics file seems to get written as latin-1. Cheers Will -- Dr William Henney, Centro de Radioastronomía y Astrofísica, Universidad Nacional Autónoma de México, Campus Morelia ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-29 11:16 ` William Henney 2008-08-31 18:14 ` Eric Schulte @ 2008-09-01 0:52 ` Eric Schulte 2008-09-01 19:45 ` Seweryn Kokot 1 sibling, 1 reply; 22+ messages in thread From: Eric Schulte @ 2008-09-01 0:52 UTC (permalink / raw To: William Henney; +Cc: emacs-orgmode Thanks for the feedback, much appreciated. A new version of org-plot is up on the git repo http://github.com/eschulte/org-plot/tree/master detailed comments below... "William Henney" <whenney@gmail.com> writes: > *** [2008-08-28 Thu] Finding the table to plot > =org-plot/goto-nearest-table= searches backward first, which means > that if point is located in an options line for a following table, > then it will find the previous table instead. This is usually > undesired. I changed this so it no longer looks backwards > *** [2008-08-28 Thu] Columns with multi-word text > Consider the following table: > > #+PLOT: title:"Citas" ind:0 deps:(3) type:2d with:histograms set:"yrange [0:]" > | Sede | Max cites | H-index | > |-----------+-----------+---------| > | Chile | 257.72 | 21.39 | > | Leeds | 165.77 | 19.68 | > | São Paolo | 71.00 | 11.50 | > | Stockholm | 134.19 | 14.33 | > | Morelia | 257.56 | 17.67 | > > In theory, this should plot the third column. However, the data > point for São Paolo comes from the second column > instead. Presumably this is because of the embedded space in "Sõo > Paolo". If I replace it with a unicode non-breaking space, > "São Paolo", then it works correctly. you're right, I am now quoting non-text columns on export which takes care of the problem you mentioned here. Also, org-plot is now using to gnuplot `xticlabel' command to use the `ind' column's values as labels in the case that they are text. (to demonstrate, plot your table from above with the ind:1 option). If you don't mind, I would like to add the table you sent above to the example.org file in org-plot to demonstrate this feature. Thanks -- Eric ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-09-01 0:52 ` Eric Schulte @ 2008-09-01 19:45 ` Seweryn Kokot 2008-09-01 20:17 ` Eric Schulte 0 siblings, 1 reply; 22+ messages in thread From: Seweryn Kokot @ 2008-09-01 19:45 UTC (permalink / raw To: emacs-orgmode Hi Eric, I just want to ask if it is necessary to redefine 'debug' function in org-plot.el? Because when I put the following lines into .emacs file: (require 'org-plot) (add-hook 'org-mode-hook (lambda () (local-set-key (kbd "\M-\C-g") 'org-plot/gnuplot))) whenever I invoke an error, instead of getting *Backtrace* buffer I get a strange message in the echo line. -- regards, Seweryn Kokot ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Re: org-plot (generating graphs from org-mode) 2008-09-01 19:45 ` Seweryn Kokot @ 2008-09-01 20:17 ` Eric Schulte 0 siblings, 0 replies; 22+ messages in thread From: Eric Schulte @ 2008-09-01 20:17 UTC (permalink / raw To: Seweryn Kokot; +Cc: emacs-orgmode oh, not at all, I was using it for convenience during my own debugging, and didn't realize I was overwriting an existing function. Please feel free to remove the `debug' definition from org-plot.el (I will remove it from the version in my git repo right now). Thanks -- Eric ^ permalink raw reply [flat|nested] 22+ messages in thread
* org-plot (generating graphs from org-mode) @ 2008-08-26 1:53 Eric Schulte 2008-08-26 10:02 ` Manish ` (4 more replies) 0 siblings, 5 replies; 22+ messages in thread From: Eric Schulte @ 2008-08-26 1:53 UTC (permalink / raw To: Org-mode Hi, org-plot enables generation of graphs from data stored in org tables (maybe eventually elsewhere in org files). It is available on github at http://github.com/eschulte/org-plot/tree/master or with git clone git://github.com/eschulte/org-plot.git Included with org-plot.el is an example.org file which should quickly show off it's features, options and abilities. While this is not completed, it is functional, and I figure better to get early feedback then wait until it's all polished. Please give it a look and let me know what you think. Thanks -- Eric ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-26 1:53 Eric Schulte @ 2008-08-26 10:02 ` Manish 2008-08-26 15:10 ` Eric Schulte 2008-08-26 12:24 ` Sebastian Rose ` (3 subsequent siblings) 4 siblings, 1 reply; 22+ messages in thread From: Manish @ 2008-08-26 10:02 UTC (permalink / raw To: Eric Schulte; +Cc: Org-mode On Tue, Aug 26, 2008 at 7:23 AM, Eric Schulte wrote: > Hi, > > org-plot enables generation of graphs from data stored in org tables > (maybe eventually elsewhere in org files). > > It is available on github at > http://github.com/eschulte/org-plot/tree/master or with > > git clone git://github.com/eschulte/org-plot.git > > Included with org-plot.el is an example.org file which should quickly > show off it's features, options and abilities. > > While this is not completed, it is functional, and I figure better to > get early feedback then wait until it's all polished. Please give it > a look and let me know what you think. Awesome! This has wonderful possibilities for my work. I just wish I had this a couple of months ago. But I hope I am going to have an opportunity to use this again soon. Works great on GNU Emacs 22.1.1 with Org 6.06b and gnuplot 4.2 patchlevel 3. Got a "current buffer has no process" when tried from Windows Native GNU Emacs 22.2.1 but I am sure that's something I need to correct at my end. A couple of questions (or feature requests): 1. How can I save the image? I think the question how to use a different device like "png" and have charts saved on disk. 2. How to use custom labels? 3. How can I pick and choose which columns to plot like in gnuplot's plot command? 4. How can I cycle through all tables and plot them all? Thanks for writing and sharing this. Regards, -- Manish ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-26 10:02 ` Manish @ 2008-08-26 15:10 ` Eric Schulte 2008-09-01 14:27 ` Carsten Dominik 0 siblings, 1 reply; 22+ messages in thread From: Eric Schulte @ 2008-08-26 15:10 UTC (permalink / raw To: Manish; +Cc: Org-mode On Tuesday, August 26, at 15:32, Manish wrote: > On Tue, Aug 26, 2008 at 7:23 AM, Eric Schulte wrote: > > Hi, > > > > org-plot enables generation of graphs from data stored in org tables > > (maybe eventually elsewhere in org files). > > > > It is available on github at > > http://github.com/eschulte/org-plot/tree/master or with > > > > git clone git://github.com/eschulte/org-plot.git > > > > Included with org-plot.el is an example.org file which should quickly > > show off it's features, options and abilities. > > > > While this is not completed, it is functional, and I figure better to > > get early feedback then wait until it's all polished. Please give it > > a look and let me know what you think. > > Awesome! This has wonderful possibilities for my work. I just wish I > had this a couple of months ago. But I hope I am going to have an > opportunity to use this again soon. Great to hear, hopefully this will be more robust by then :) > Works great on GNU Emacs 22.1.1 with Org 6.06b and gnuplot 4.2 > patchlevel 3. Got a "current buffer has no process" when tried from > Windows Native GNU Emacs 22.2.1 but I am sure that's something I need > to correct at my end. I'll take a look and see if there are any unix-only commands being used, I have no access to windows machines so I may not be able to reproduce. > A couple of questions (or feature requests): > > 1. How can I save the image? I think the question how to use a > different device like "png" and have charts saved on disk. you can save the image by adding a file:"path-to-image.jpg" option to the #+PLOT: line above the graph, which should set gnuplot's `output' and `term' options appropriately, if you want to do fancy things you can set these values manually by adding something like the following to the #+PLOT: line set:"terminal png transparent nocrop enhanced font arial 8" set:"output 'my-output-file.png'" > 2. How to use custom labels? there is an option intended for this purpose labels:(col1 col2) which should have this effect, however I will probably need to change the way the regexp parses options first, I'll put this on my TODO list and let you know when it's working. > 3. How can I pick and choose which columns to plot like in gnuplot's > plot command? you select the column to serve as the dependent variable (x-axis) using the dep: command with the number of the column as the sole argument (dep:1 to use the first column). To specify which cols should be plotted use the inds: options passing a list of column numbers, like inds:(2 3) > 4. How can I cycle through all tables and plot them all? I have no idea what the best method would be for cycling through tables, I agree this would be a useful feature (picturing all graphs being re-generated upon export to latex/html), however I don't know of any commands for cycling through tables. I've been thinking of defining a [[plot:]] type link which may make this easier. Also, I may be able to copy an answer from the exporting code. If anyone has any ideas I'd love to hear them. > Thanks for writing and sharing this. Thank you, I'm happy it may be useful. -- Eric > Regards, > -- Manish -- schulte ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-26 15:10 ` Eric Schulte @ 2008-09-01 14:27 ` Carsten Dominik 0 siblings, 0 replies; 22+ messages in thread From: Carsten Dominik @ 2008-09-01 14:27 UTC (permalink / raw To: Eric Schulte; +Cc: Org-mode Hi Eric, you have done an awesome job. I am very excited to try this out. - Carsten On Aug 26, 2008, at 5:10 PM, Eric Schulte wrote: >> 4. How can I cycle through all tables and plot them all? > > I have no idea what the best method would be for cycling through > tables, I agree this would be a useful feature (picturing all graphs > being re-generated upon export to latex/html), however I don't know of > any commands for cycling through tables. I've been thinking of > defining a [[plot:]] type link which may make this easier. Also, I > may be able to copy an answer from the exporting code. If anyone has > any ideas I'd love to hear them. To call a function at each table, you can use org-table-map-tables, defined in org.el. - Carsten ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-26 1:53 Eric Schulte 2008-08-26 10:02 ` Manish @ 2008-08-26 12:24 ` Sebastian Rose 2008-08-26 12:36 ` Sebastian Rose ` (2 subsequent siblings) 4 siblings, 0 replies; 22+ messages in thread From: Sebastian Rose @ 2008-08-26 12:24 UTC (permalink / raw Cc: Org-mode Hi Eric, It's beautiful! ...but in emacs 23 only the first table works. C-M-g on the other tables gives me the following message: 'Not in table data field' emacs 23, CVS last week, Debian testing. But, hey, this is wonderful! - Sebastian Eric Schulte wrote: > Hi, > > org-plot enables generation of graphs from data stored in org tables > (maybe eventually elsewhere in org files). > > It is available on github at > http://github.com/eschulte/org-plot/tree/master or with > > git clone git://github.com/eschulte/org-plot.git > > Included with org-plot.el is an example.org file which should quickly > show off it's features, options and abilities. > > While this is not completed, it is functional, and I figure better to > get early feedback then wait until it's all polished. Please give it > a look and let me know what you think. > > Thanks -- Eric > > > _______________________________________________ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode > ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-26 1:53 Eric Schulte 2008-08-26 10:02 ` Manish 2008-08-26 12:24 ` Sebastian Rose @ 2008-08-26 12:36 ` Sebastian Rose 2008-08-26 15:08 ` Eric Schulte 2008-08-27 15:27 ` Samuel Wales 2008-09-02 18:08 ` Thomas Baumann 4 siblings, 1 reply; 22+ messages in thread From: Sebastian Rose @ 2008-08-26 12:36 UTC (permalink / raw Cc: Org-mode Hi again, still emacs 23: On the table with data: The first try works. Then I have to pres C-M-g twice to get the plot window. On the empty tables: with (setq debug-on-error t) this is in *Messages*: (:plot-type grid :with lines :ind 0 :title "org mode" :map nil) [3 times] Mark set [14 times] Mapping tables: 100% Mark set [2 times] Mapping tables: done signal: Wrong number of arguments: (lambda (el) (message (format "%S" el)) el), 2 The buffer is modified after C-M-g and emacs asks if I want to save it. - Sebastian ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-26 12:36 ` Sebastian Rose @ 2008-08-26 15:08 ` Eric Schulte 0 siblings, 0 replies; 22+ messages in thread From: Eric Schulte @ 2008-08-26 15:08 UTC (permalink / raw To: sebastian_rose; +Cc: Org-mode On Tuesday, August 26, at 14:36, Sebastian Rose wrote: > Hi again, > > > still emacs 23: on Debian (Xubuntu) I'm using - cvs emacs23 (from a couple of weeks ago) - gnuplot 4.2 patchlevel 2 - gnuplot.el 0.6.0 > On the table with data: > > The first try works. Then I have to pres C-M-g twice to get > the plot window. I've noticed this as well, but for me it only happens when doing 3d or grid plots. I think the gnuplot process may be changing state, I may just start restarting this process before every graph. > On the empty tables: > > with (setq debug-on-error t) this is in *Messages*: How have I never seen `debug-on-error' before! thanks > (:plot-type grid :with lines :ind 0 :title "org mode" :map nil) [3 times] > Mark set [14 times] > Mapping tables: 100% > Mark set [2 times] > Mapping tables: done > signal: Wrong number of arguments: (lambda (el) (message (format "%S" > el)) el), 2 > > > > The buffer is modified after C-M-g and emacs asks if I want to save it. That is certainly something to figure out. I've added all these issues to my TODO for the project, and will hopefully start resolving them soon, I'll update here. Thanks for the testing/debugging -- Eric > - Sebastian > > > > > _______________________________________________ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode -- schulte ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-26 1:53 Eric Schulte ` (2 preceding siblings ...) 2008-08-26 12:36 ` Sebastian Rose @ 2008-08-27 15:27 ` Samuel Wales 2008-08-27 22:18 ` Eric Schulte 2008-09-02 18:08 ` Thomas Baumann 4 siblings, 1 reply; 22+ messages in thread From: Samuel Wales @ 2008-08-27 15:27 UTC (permalink / raw To: Eric Schulte; +Cc: Org-mode Good stuff. Possibilities: 1. For a selected column, it can be nice to draw a histogram. Long ago, I developed the following formula for choosing a bin size. Seems to work. 5*(max-min)/n You can use something like bin*round*($1 * (1.0/bin)) to bin. Note that cl-extra.el's (round*) might be more consistent and mathematically vetted than (round) (though you might not be allowed to use cl-extra.el). I haven't looked at gnuplot in a decade, so maybe it already has this. 2. It might be nice to show descriptive statistics (I would show mean, median, geometric mean, standard deviation, min, max, range) somewhere while showing the plot, if you don't already do this. ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-27 15:27 ` Samuel Wales @ 2008-08-27 22:18 ` Eric Schulte 0 siblings, 0 replies; 22+ messages in thread From: Eric Schulte @ 2008-08-27 22:18 UTC (permalink / raw To: Samuel Wales; +Cc: Org-mode On Wednesday, August 27, at 08:27, Samuel Wales wrote: > Good stuff. > > Possibilities: > > 1. For a selected column, it can be nice to draw a histogram. There is a 'with histograms' option in gnuplot. I made a small change to org-plot.el so that this option now works as expected, for an example of plotting a histogram (of one or more columns) using org-plot see the example.org file in my git repo. > 2. It might be nice to show descriptive statistics (I would show > mean, median, geometric mean, standard deviation, min, max, range) > somewhere while showing the plot, if you don't already do this. That does seem like it would be useful (maybe accessible through another optional argument), I've added it to the project's TODO file. Thanks -- Eric ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: org-plot (generating graphs from org-mode) 2008-08-26 1:53 Eric Schulte ` (3 preceding siblings ...) 2008-08-27 15:27 ` Samuel Wales @ 2008-09-02 18:08 ` Thomas Baumann 4 siblings, 0 replies; 22+ messages in thread From: Thomas Baumann @ 2008-09-02 18:08 UTC (permalink / raw To: emacs-orgmode Awesome, thanks. Thomas ^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2008-09-03 3:25 UTC | newest] Thread overview: 22+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- [not found] <20080826151404.0996C2179B@mailhost.cs.tu-berlin.de> 2008-08-26 17:57 ` Emacs-orgmode Digest, Vol 30, Issue 39 Stephan Schmitt 2008-08-26 18:08 ` Eric Schulte 2008-08-26 23:09 ` org-plot (generating graphs from org-mode) Eric Schulte 2008-08-27 9:30 ` Sebastian Rose 2008-08-27 15:02 ` Eric Schulte 2008-08-27 9:32 ` Sebastian Rose 2008-08-29 11:16 ` William Henney 2008-08-31 18:14 ` Eric Schulte 2008-09-03 3:25 ` William Henney 2008-09-01 0:52 ` Eric Schulte 2008-09-01 19:45 ` Seweryn Kokot 2008-09-01 20:17 ` Eric Schulte 2008-08-26 1:53 Eric Schulte 2008-08-26 10:02 ` Manish 2008-08-26 15:10 ` Eric Schulte 2008-09-01 14:27 ` Carsten Dominik 2008-08-26 12:24 ` Sebastian Rose 2008-08-26 12:36 ` Sebastian Rose 2008-08-26 15:08 ` Eric Schulte 2008-08-27 15:27 ` Samuel Wales 2008-08-27 22:18 ` Eric Schulte 2008-09-02 18:08 ` Thomas Baumann
Code repositories for project(s) associated with this external index https://git.savannah.gnu.org/cgit/emacs.git https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.