Exporting subtree as beamer presentation

Exporting subtree as beamer presentation

[JBash]

[-- Attachment #1.1: Type: text/plain, Size: 805 bytes --]

Hi,

How do I export a beamer presentation, embedded as a subtree in an org file?
I have attached a file with subtree properties defined as described on the
worg page - http://orgmode.org/worg/org-tutorials/org-beamer.php.

I expected 'C-c C-e 1 d' to do it, but the export is a article
documentclass, and is the entire document rather than just the subtree.
If I cut and paste the subtree to a separate file, and define the export
settings for beamer at the top of the file, I get the expected results
(documentclass[presentation]{beamer} (using C-c C-e d, since I am now have
the entire file, rather than a subtree).

I'm not sure if I have the properties defined improperly, or if I'm not
using the right command to export the subtree.

(Using 6.33trans, updated from git this morning.)

Thanks,
Jerry

[-- Attachment #1.2: Type: text/html, Size: 937 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

Fwd: Exporting subtree as beamer presentation

[JBash]

[-- Attachment #1.1: Type: text/plain, Size: 1218 bytes --]

Sorry - With attachments this time.
project1.org has the embedded presentation (CDR Presentation), and
cdr1.orgis that subtree placed in a separate file, adjusting the
settings
accordingly).
Thanks,
Jerry

---------- Forwarded message ----------
From: JBash <bashveank@gmail.com>
Date: Mon, Jan 4, 2010 at 1:21 PM
Subject: Exporting subtree as beamer presentation
To: emacs-orgmode Mode <emacs-orgmode@gnu.org>


Hi,

How do I export a beamer presentation, embedded as a subtree in an org file?
I have attached a file with subtree properties defined as described on the
worg page - http://orgmode.org/worg/org-tutorials/org-beamer.php.

I expected 'C-c C-e 1 d' to do it, but the export is a article
documentclass, and is the entire document rather than just the subtree.
If I cut and paste the subtree to a separate file, and define the export
settings for beamer at the top of the file, I get the expected results
(documentclass[presentation]{beamer} (using C-c C-e d, since I am now have
the entire file, rather than a subtree).

I'm not sure if I have the properties defined improperly, or if I'm not
using the right command to export the subtree.

(Using 6.33trans, updated from git this morning.)

Thanks,
Jerry

[-- Attachment #1.2: Type: text/html, Size: 1663 bytes --]

[-- Attachment #2: project1.org --]
[-- Type: application/octet-stream, Size: 1937 bytes --]

* Project 1
** Project Notes for Design
Tasks, Notes, Analysis
*** PDR Discussion
*** PDR Presentation
** Project Notes for Development
More Tasks, Notes and Analysis
*** CDR Discussion
Notes, Tasks, Highlights, Issues, Status
*** CDR Presentation
    :PROPERTIES:
    :LaTeX_CLASS: beamer
    :BEAMER_FRAME_LEVEL: 2
    :LaTeX_CLASS_OPTIONS: [presentation]
    :BEAMER_HEADER_EXTRA: \usetheme{Madrid}\usecolortheme{default}
    :COLUMNS: %40ITEM %10BEAMER_env(Env) %10BEAMER_envargs(Env Args) %4BEAMER_col(Col) %8BEAMER_extra(Extra)
    :TITLE: Project 1 CDR Presentation
    :END:
**** Overview
***** Welcome and Introduction 
  - Agenda
  - Team
    - System
    - Hardware
    - Software
    - Test
    - PM
  - Programmatic Status
**** Update Development and Status

***** Hardware Development
****** HW Module 1						    :B_block:
       :PROPERTIES:
       :BEAMER_env: block
       :END:
 - Requirements
 - Design
 - Status
******  HW Module 2						    :B_block:
       :PROPERTIES:
       :BEAMER_env: block
       :END:
 - Requirements
 - Design
 - Status
***** Software Development
      :PROPERTIES:
      :END:
****** CS Module 1						    :B_block:
       :PROPERTIES:
       :BEAMER_env: block
       :END:
   - Requirements
   - Design
   - Status
****** CS Module 2						    :B_block:
       :PROPERTIES:
       :BEAMER_env: block
       :END:
   - Requirements
   - Design
   - Status
**** Integration Planning
***** Component Delivery
 - Status of various compenents and modules
***** Component / Module Testing
 - Hardware and software testing
***** System Integration Plan
****** Integration of components				    :B_block:
       :PROPERTIES:
       :BEAMER_env: block
       :END:
 - Acceptance Test and Delivery
**** Programmatic
***** Programatic Content				       :B_alertblock:
      :PROPERTIES:
      :BEAMER_env: alertblock
      :END:
 - Program Stuff
       



** Implementation Phase
** Integration Phase

[-- Attachment #3: cdr1.org --]
[-- Type: application/octet-stream, Size: 1705 bytes --]

#+LaTeX_CLASS: beamer
#+BEAMER_FRAME_LEVEL: 3
#+LaTeX_CLASS_OPTIONS: [presentation]
#+BEAMER_HEADER_EXTRA: \usetheme{Madrid}\usecolortheme{default}
#+COLUMNS: %40ITEM %10BEAMER_env(Env) %10BEAMER_envargs(Env Args) %4BEAMER_col(Col) %8BEAMER_extra(Extra)
#+TITLE: Project 1 CDR Presentation

* CDR Presentation
  :PROPERTIES:
  :COLUMNS: %40ITEM %10BEAMER_env(Env) %10BEAMER_envargs(Env Args) %4BEAMER_col(Col) %8BEAMER_extra(Extra)
  :END:
** Overview
*** Welcome and Introduction 
  - Agenda
  - Team
    - System
    - Hardware
    - Software
    - Test
    - PM
  - Programmatic Status
** Update Development and Status

*** Hardware Development
**** HW Module 1						    :B_block:
     :PROPERTIES:
     :BEAMER_env: block
     :END:
 - Requirements
 - Design
 - Status
****  HW Module 2						    :B_block:
     :PROPERTIES:
     :BEAMER_env: block
     :END:
 - Requirements
 - Design
 - Status
*** Software Development
    :PROPERTIES:
    :END:
**** CS Module 1						    :B_block:
     :PROPERTIES:
     :BEAMER_env: block
     :END:
   - Requirements
   - Design
   - Status
**** CS Module 2						    :B_block:
     :PROPERTIES:
     :BEAMER_env: block
     :END:
   - Requirements
   - Design
   - Status
** Integration Planning
*** Component Delivery
 - Status of various compenents and modules
*** Component / Module Testing
 - Hardware and software testing
*** System Integration Plan
**** Integration of components					    :B_block:
     :PROPERTIES:
     :BEAMER_env: block
     :END:
 - Acceptance Test and Delivery
** Programmatic
*** Programatic Content
**** Programmatic Stuff					       :B_alertblock:
Very important point
     :PROPERTIES:
     :BEAMER_env: alertblock
     :END:
     

[-- Attachment #4: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

Re: Fwd: Exporting subtree as beamer presentation

[Carsten Dominik]

Hi Jerry,

I guess you do not have transient-mark-mode on?  When I turn it off, I  
can
reproduce the bug you are reporting.

The current git release should have this fixed and work without
transient-mark-mode.

- Carsten

On Jan 4, 2010, at 7:26 PM, JBash wrote:

> Sorry - With attachments this time.
> project1.org has the embedded presentation (CDR Presentation), and  
> cdr1.org is that subtree placed in a separate file, adjusting the  
> settings accordingly).
> Thanks,
> Jerry
>
> ---------- Forwarded message ----------
> From: JBash <bashveank@gmail.com>
> Date: Mon, Jan 4, 2010 at 1:21 PM
> Subject: Exporting subtree as beamer presentation
> To: emacs-orgmode Mode <emacs-orgmode@gnu.org>
>
>
> Hi,
>
> How do I export a beamer presentation, embedded as a subtree in an  
> org file? I have attached a file with subtree properties defined as  
> described on the worg page - http://orgmode.org/worg/org-tutorials/org-beamer.php 
> .
>
> I expected 'C-c C-e 1 d' to do it, but the export is a article  
> documentclass, and is the entire document rather than just the  
> subtree.
> If I cut and paste the subtree to a separate file, and define the  
> export settings for beamer at the top of the file, I get the  
> expected results (documentclass[presentation]{beamer} (using C-c C-e  
> d, since I am now have the entire file, rather than a subtree).
>
> I'm not sure if I have the properties defined improperly, or if I'm  
> not using the right command to export the subtree.
>
> (Using 6.33trans, updated from git this morning.)
>
> Thanks,
> Jerry
>
>
> < 
> project1.org><cdr1.org>_______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode

- Carsten