all messages for Emacs-related lists mirrored at yhetil.org
 help / color / mirror / code / Atom feed
* [ELPA] New package: shell-command+
@ 2020-09-25 12:56 Philip K.
  2020-09-25 13:43 ` Stefan Monnier
  0 siblings, 1 reply; 7+ messages in thread
From: Philip K. @ 2020-09-25 12:56 UTC (permalink / raw)
  To: emacs-devel


[ I tried to send this message yesterday already, but for some reason it
  never appeared in the archive. I'm assuming the fault was on my side,
  so I'm resending it again. ]

Hi,

I wanted to submit this package I wrote a while ago. It provides an
interactive command named "shell-command+", that is used in the same way
as one uses shell-command.

The difference is that shell-command+ pre-processes the user-input,
before passing it to shell-command or related functions. I think what it
does is best explained by the examples given in the commentary section:

   	> wc -l
  
   Count all lines in a buffer, and display the result in the
   minibuffer.
  
  
  	.. < ls -l
  
   Replace the current region (or buffer in no region is selected)
   with a directory listing of the parent directory.
  
  
  	| tr -d a-z
  
   Delete all instances of the charachters a, b, c, ..., z, in the
   selected region (or buffer, if no region was selected).
  
  
  	... make
  
   Run Eshell's make (i.e. `compile') in the parent's parent
   directory.

I have previously submitted the package under the name "bang" to
MELPA[0], but have since decided that the name isn't expressive and
could therefore confuse users. This version also includes a few
improvements that I have not yet added to bang.

It should also be noted, that the file is currently licensed under the
CC0 1.0 Universal (CC0 1.0) Public Domain Dedication[1] license, which
I'm not sure if it is OK.

[0] https://melpa.org/#/bang
[1] https://creativecommons.org/publicdomain/zero/1.0/

-- 
	Philip K.



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [ELPA] New package: shell-command+
  2020-09-25 12:56 [ELPA] New package: shell-command+ Philip K.
@ 2020-09-25 13:43 ` Stefan Monnier
  2020-09-25 13:52   ` Philip K.
  0 siblings, 1 reply; 7+ messages in thread
From: Stefan Monnier @ 2020-09-25 13:43 UTC (permalink / raw)
  To: Philip K.; +Cc: emacs-devel

Hi,

> [ I tried to send this message yesterday already, but for some reason it
>   never appeared in the archive. I'm assuming the fault was on my side,
>   so I'm resending it again. ]

Didn't see it yesterday, but did see this one.

> I wanted to submit this package I wrote a while ago. It provides an
> interactive command named "shell-command+", that is used in the same way
> as one uses shell-command.

Sounds good.  Do you have a pointer to the code?

I don't see your name in the list of people with copyright assignments.
Then again, I do see some "Philip K..." but I can't be sure it's
indeed you.  Did you sign the paperwork already?

> It should also be noted, that the file is currently licensed under the
> CC0 1.0 Universal (CC0 1.0) Public Domain Dedication[1] license, which
> I'm not sure if it is OK.

That's not a problem for us, but we'd change it to GPLv3+ when we add it
to GNU ELPA.  Not sure if that would be OK with you.


        Stefan




^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [ELPA] New package: shell-command+
  2020-09-25 13:43 ` Stefan Monnier
@ 2020-09-25 13:52   ` Philip K.
  2020-09-25 23:38     ` Ergus
  0 siblings, 1 reply; 7+ messages in thread
From: Philip K. @ 2020-09-25 13:52 UTC (permalink / raw)
  To: Stefan Monnier; +Cc: emacs-devel

[-- Attachment #1: Type: text/plain, Size: 310 bytes --]

Stefan Monnier <monnier@iro.umontreal.ca> writes:

>> I wanted to submit this package I wrote a while ago. It provides an
>> interactive command named "shell-command+", that is used in the same way
>> as one uses shell-command.
>
> Sounds good.  Do you have a pointer to the code?

Oh, I forgot to attach it:


[-- Attachment #2: shell-command+.el --]
[-- Type: text/plain, Size: 5285 bytes --]

;;; shell-command+.el --- An extended shell-command -*- lexical-binding: t -*-

;; Author: Philip K. <philipk@posteo.net>
;; Version: 1.0.3
;; Keywords: unix, processes, convenience
;; Package-Requires: ((emacs "24.1"))
;; URL: http://elpa.gnu.org/packages/shell-command+.html

;; This file is NOT part of Emacs.
;;
;; This file is in the public domain, to the extent possible under law,
;; published under the CC0 1.0 Universal license.
;;
;; For a full copy of the CC0 license see
;; https://creativecommons.org/publicdomain/zero/1.0/legalcode

;;; Commentary:
;;
;; `shell-command+' is a `shell-command' substitute, that extends the
;; regular Emacs command with several features.
;;
;; A few examples of what `shell-command+' can do:
;;
;;
;; 	> wc -l
;;
;; Count all lines in a buffer, and display the result in the
;; minibuffer.
;;
;;
;;	.. < ls -l
;;
;; Replace the current region (or buffer in no region is selected)
;; with a directory listing of the parent directory.
;;
;;
;;	| tr -d a-z
;;
;; Delete all instances of the charachters a, b, c, ..., z, in the
;; selected region (or buffer, if no region was selected).
;;
;;
;;	... make
;;
;; Run Eshell's make (i.e. `compile') in the parent's parent
;; directory.

(eval-when-compile (require 'rx))
(require 'eshell)

;;; Code:

(defgroup shell-command+ nil
  "An extended `shell-command'"
  :group 'external
  :prefix "shell-command+-")

(defcustom shell-command+-use-eshell t
  "Check if there is an eshell-handler for each command."
  :type 'boolean)

(defconst shell-command+--command-regexp
  (rx bos
      ;; ignore all preceding whitespace
      (* space)
      ;; check for working directory string
      (? (group (or (: ?. (not (any "/"))) ?/ ?~)
                (* (not space)))
         (+ space))
      ;; check for redirection indicator
      (? (or (group ?<) (group ?>) (group ?|) ?!))
      ;; allow whitespace after indicator
      (* space)
      ;; actual command (and command name)
      (group (: (group (*? not-newline))
                (? space))
             (+ not-newline))
      eos)
  "Regular expression to parse `shell-command+' input.")

(defun shell-command+-expand-path (path)
  "Expand any PATH into absolute path with additional tricks.

Furthermore, replace each sequence with three or more `.'s with a
proper upwards directory pointers.  This means that '....' becomes
'../../../..', and so on."
  (expand-file-name
   (replace-regexp-in-string
    (rx (>= 2 "."))
    (lambda (sub)
      (mapconcat #'identity (make-list (1- (length sub)) "..") "/"))
    path)))

;;;###autoload
(defun shell-command+ (command beg end)
  "Intelligently execute string COMMAND in inferior shell.

If COMMAND is prefixed with an absolute or relative path, the
created process will the executed in the specified path.

When COMMAND starts with...
  <  the output of COMMAND replaces the current selection
  >  COMMAND is run with the current selection as input
  |  the current selection is filtered through COMMAND
  !  COMMAND is simply executed (same as without any prefix)

If `shell-command+-use-eshell' is non-nil, and the the first
argument of COMMAND has a defined `eshell'-function, use that.

Inside COMMAND, % is replaced with the current file name.  To
insert a literal % quote it using a backslash.

These extentions can all be combined with one-another.

In case a region is active, `shell-command+' will only work with the region
between BEG and END.  Otherwise the whole buffer is processed."
  (interactive (list (read-shell-command "Shell command: ")
                     (if (use-region-p) (region-beginning) (point-min))
                     (if (use-region-p) (region-end) (point-max))))
  (save-match-data
    (unless (string-match shell-command+--command-regexp command)
      (error "Invalid command"))
    (let ((path (match-string-no-properties 1 command))
          (cmd (match-string-no-properties 6 command))
          (rest (condition-case nil
                    (replace-regexp-in-string
                     (rx (* ?\\ ?\\) (or ?\\ (group "%")))
                     buffer-file-name
                     (match-string-no-properties 5 command)
                     nil nil 1)
                  (error (match-string-no-properties 5 command)))))
      (let ((default-directory (shell-command+-expand-path (or path "."))))
        (cond ((match-string-no-properties 2 command) ;<
               (delete-region beg end)
               (shell-command rest t shell-command-default-error-buffer)
               (exchange-point-and-mark))
              ((match-string-no-properties 3 command) ;>
               (shell-command-on-region
                beg end rest nil nil
                shell-command-default-error-buffer t))
              ((match-string-no-properties 4 command) ;|
               (shell-command-on-region
                beg end rest t t
                shell-command-default-error-buffer t))
              ((and shell-command+-use-eshell
                    (intern-soft (concat "eshell/" cmd)))
               (eshell-command rest (and current-prefix-arg t)))
              (t (shell-command rest (and current-prefix-arg t)
                                shell-command-default-error-buffer)))))))

(provide 'shell-command+)

;;; shell-command+.el ends here

[-- Attachment #3: Type: text/plain, Size: 611 bytes --]


> I don't see your name in the list of people with copyright assignments.
> Then again, I do see some "Philip K..." but I can't be sure it's
> indeed you.  Did you sign the paperwork already?

Yes, I signed it last year when my address was philip@warpmail.net.

>> It should also be noted, that the file is currently licensed under the
>> CC0 1.0 Universal (CC0 1.0) Public Domain Dedication[1] license, which
>> I'm not sure if it is OK.
>
> That's not a problem for us, but we'd change it to GPLv3+ when we add it
> to GNU ELPA.  Not sure if that would be OK with you.

No problem with that.

-- 
	Philip K.

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [ELPA] New package: shell-command+
  2020-09-25 13:52   ` Philip K.
@ 2020-09-25 23:38     ` Ergus
  2020-09-26  9:38       ` Philip K.
  0 siblings, 1 reply; 7+ messages in thread
From: Ergus @ 2020-09-25 23:38 UTC (permalink / raw)
  To: Philip K.; +Cc: Stefan Monnier, emacs-devel

Hi Philip:

As a long time Bang user I am happy to see it in Elpa.

May I suggest (in spite of it is very simple) you to add the
configuration lines in the Readme and package description for new users?

If you want to add also the use-package config I have this in my init
file too:

(use-package bang
   :ensure t
   :bind ("M-!" . bang))

Best,
Ergus

On Fri, Sep 25, 2020 at 03:52:22PM +0200, Philip K. wrote:
>Stefan Monnier <monnier@iro.umontreal.ca> writes:
>
>>> I wanted to submit this package I wrote a while ago. It provides an
>>> interactive command named "shell-command+", that is used in the same way
>>> as one uses shell-command.
>>
>> Sounds good.  Do you have a pointer to the code?
>
>Oh, I forgot to attach it:
>

>;;; shell-command+.el --- An extended shell-command -*- lexical-binding: t -*-
>
>;; Author: Philip K. <philipk@posteo.net>
>;; Version: 1.0.3
>;; Keywords: unix, processes, convenience
>;; Package-Requires: ((emacs "24.1"))
>;; URL: http://elpa.gnu.org/packages/shell-command+.html
>
>;; This file is NOT part of Emacs.
>;;
>;; This file is in the public domain, to the extent possible under law,
>;; published under the CC0 1.0 Universal license.
>;;
>;; For a full copy of the CC0 license see
>;; https://creativecommons.org/publicdomain/zero/1.0/legalcode
>
>;;; Commentary:
>;;
>;; `shell-command+' is a `shell-command' substitute, that extends the
>;; regular Emacs command with several features.
>;;
>;; A few examples of what `shell-command+' can do:
>;;
>;;
>;; 	> wc -l
>;;
>;; Count all lines in a buffer, and display the result in the
>;; minibuffer.
>;;
>;;
>;;	.. < ls -l
>;;
>;; Replace the current region (or buffer in no region is selected)
>;; with a directory listing of the parent directory.
>;;
>;;
>;;	| tr -d a-z
>;;
>;; Delete all instances of the charachters a, b, c, ..., z, in the
>;; selected region (or buffer, if no region was selected).
>;;
>;;
>;;	... make
>;;
>;; Run Eshell's make (i.e. `compile') in the parent's parent
>;; directory.
>
>(eval-when-compile (require 'rx))
>(require 'eshell)
>
>;;; Code:
>
>(defgroup shell-command+ nil
>  "An extended `shell-command'"
>  :group 'external
>  :prefix "shell-command+-")
>
>(defcustom shell-command+-use-eshell t
>  "Check if there is an eshell-handler for each command."
>  :type 'boolean)
>
>(defconst shell-command+--command-regexp
>  (rx bos
>      ;; ignore all preceding whitespace
>      (* space)
>      ;; check for working directory string
>      (? (group (or (: ?. (not (any "/"))) ?/ ?~)
>                (* (not space)))
>         (+ space))
>      ;; check for redirection indicator
>      (? (or (group ?<) (group ?>) (group ?|) ?!))
>      ;; allow whitespace after indicator
>      (* space)
>      ;; actual command (and command name)
>      (group (: (group (*? not-newline))
>                (? space))
>             (+ not-newline))
>      eos)
>  "Regular expression to parse `shell-command+' input.")
>
>(defun shell-command+-expand-path (path)
>  "Expand any PATH into absolute path with additional tricks.
>
>Furthermore, replace each sequence with three or more `.'s with a
>proper upwards directory pointers.  This means that '....' becomes
>'../../../..', and so on."
>  (expand-file-name
>   (replace-regexp-in-string
>    (rx (>= 2 "."))
>    (lambda (sub)
>      (mapconcat #'identity (make-list (1- (length sub)) "..") "/"))
>    path)))
>
>;;;###autoload
>(defun shell-command+ (command beg end)
>  "Intelligently execute string COMMAND in inferior shell.
>
>If COMMAND is prefixed with an absolute or relative path, the
>created process will the executed in the specified path.
>
>When COMMAND starts with...
>  <  the output of COMMAND replaces the current selection
>  >  COMMAND is run with the current selection as input
>  |  the current selection is filtered through COMMAND
>  !  COMMAND is simply executed (same as without any prefix)
>
>If `shell-command+-use-eshell' is non-nil, and the the first
>argument of COMMAND has a defined `eshell'-function, use that.
>
>Inside COMMAND, % is replaced with the current file name.  To
>insert a literal % quote it using a backslash.
>
>These extentions can all be combined with one-another.
>
>In case a region is active, `shell-command+' will only work with the region
>between BEG and END.  Otherwise the whole buffer is processed."
>  (interactive (list (read-shell-command "Shell command: ")
>                     (if (use-region-p) (region-beginning) (point-min))
>                     (if (use-region-p) (region-end) (point-max))))
>  (save-match-data
>    (unless (string-match shell-command+--command-regexp command)
>      (error "Invalid command"))
>    (let ((path (match-string-no-properties 1 command))
>          (cmd (match-string-no-properties 6 command))
>          (rest (condition-case nil
>                    (replace-regexp-in-string
>                     (rx (* ?\\ ?\\) (or ?\\ (group "%")))
>                     buffer-file-name
>                     (match-string-no-properties 5 command)
>                     nil nil 1)
>                  (error (match-string-no-properties 5 command)))))
>      (let ((default-directory (shell-command+-expand-path (or path "."))))
>        (cond ((match-string-no-properties 2 command) ;<
>               (delete-region beg end)
>               (shell-command rest t shell-command-default-error-buffer)
>               (exchange-point-and-mark))
>              ((match-string-no-properties 3 command) ;>
>               (shell-command-on-region
>                beg end rest nil nil
>                shell-command-default-error-buffer t))
>              ((match-string-no-properties 4 command) ;|
>               (shell-command-on-region
>                beg end rest t t
>                shell-command-default-error-buffer t))
>              ((and shell-command+-use-eshell
>                    (intern-soft (concat "eshell/" cmd)))
>               (eshell-command rest (and current-prefix-arg t)))
>              (t (shell-command rest (and current-prefix-arg t)
>                                shell-command-default-error-buffer)))))))
>
>(provide 'shell-command+)
>
>;;; shell-command+.el ends here

>
>> I don't see your name in the list of people with copyright assignments.
>> Then again, I do see some "Philip K..." but I can't be sure it's
>> indeed you.  Did you sign the paperwork already?
>
>Yes, I signed it last year when my address was philip@warpmail.net.
>
>>> It should also be noted, that the file is currently licensed under the
>>> CC0 1.0 Universal (CC0 1.0) Public Domain Dedication[1] license, which
>>> I'm not sure if it is OK.
>>
>> That's not a problem for us, but we'd change it to GPLv3+ when we add it
>> to GNU ELPA.  Not sure if that would be OK with you.
>
>No problem with that.
>
>-- 
>	Philip K.




^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [ELPA] New package: shell-command+
  2020-09-25 23:38     ` Ergus
@ 2020-09-26  9:38       ` Philip K.
  2020-09-26 13:23         ` Ergus
  2020-09-26 17:21         ` Stefan Monnier
  0 siblings, 2 replies; 7+ messages in thread
From: Philip K. @ 2020-09-26  9:38 UTC (permalink / raw)
  To: Ergus; +Cc: emacs-devel

Ergus <spacibba@aol.com> writes:

> May I suggest (in spite of it is very simple) you to add the
> configuration lines in the Readme and package description for new users?
>
> If you want to add also the use-package config I have this in my init
> file too:
>
> (use-package bang
>    :ensure t
>    :bind ("M-!" . bang))

The README for bang still has a line like this, but I removed it for
shell-command+, as use-package isn't in ELPA. My hope was that the line

	`shell-command+' is a `shell-command' substitute

would be enough, but maybe

	(global-set-key (kbd "M-!") #'shell-command+)

would help? shell-command+ is auto-loaded, so it should be the same, and
anyone using use-package or similar packages should be able to translate
this into their language.

The only issue is that I can't commit anything to the ELPA repo, who
would I have to contact to request that access?

-- 
	Philip K.



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [ELPA] New package: shell-command+
  2020-09-26  9:38       ` Philip K.
@ 2020-09-26 13:23         ` Ergus
  2020-09-26 17:21         ` Stefan Monnier
  1 sibling, 0 replies; 7+ messages in thread
From: Ergus @ 2020-09-26 13:23 UTC (permalink / raw)
  To: Philip K.; +Cc: emacs-devel

On Sat, Sep 26, 2020 at 11:38:40AM +0200, Philip K. wrote:
>Ergus <spacibba@aol.com> writes:
>
>> May I suggest (in spite of it is very simple) you to add the
>> configuration lines in the Readme and package description for new users?
>>
>> If you want to add also the use-package config I have this in my init
>> file too:
>>
>> (use-package bang
>>    :ensure t
>>    :bind ("M-!" . bang))
>
>The README for bang still has a line like this, but I removed it for
>shell-command+, as use-package isn't in ELPA. My hope was that the line
>
>	`shell-command+' is a `shell-command' substitute
>
>would be enough, but maybe
>
>	(global-set-key (kbd "M-!") #'shell-command+)
>
>would help? shell-command+ is auto-loaded, so it should be the same, and
>anyone using use-package or similar packages should be able to translate
>this into their language.
>
>The only issue is that I can't commit anything to the ELPA repo, who
>would I have to contact to request that access?
>
>-- 
>	Philip K.

Hopefully use-package will become part of emacs at some point; but this
line is good enough for now IMO. Very thanks for this.



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [ELPA] New package: shell-command+
  2020-09-26  9:38       ` Philip K.
  2020-09-26 13:23         ` Ergus
@ 2020-09-26 17:21         ` Stefan Monnier
  1 sibling, 0 replies; 7+ messages in thread
From: Stefan Monnier @ 2020-09-26 17:21 UTC (permalink / raw)
  To: Philip K.; +Cc: Ergus, emacs-devel

> The only issue is that I can't commit anything to the ELPA repo, who
> would I have to contact to request that access?

You'd have to ask the Emacs maintainers (the access rights are shared
between elpa.git and emacs.git).


        Stefan




^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2020-09-26 17:21 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-09-25 12:56 [ELPA] New package: shell-command+ Philip K.
2020-09-25 13:43 ` Stefan Monnier
2020-09-25 13:52   ` Philip K.
2020-09-25 23:38     ` Ergus
2020-09-26  9:38       ` Philip K.
2020-09-26 13:23         ` Ergus
2020-09-26 17:21         ` Stefan Monnier

Code repositories for project(s) associated with this external index

	https://git.savannah.gnu.org/cgit/emacs.git
	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.