* bug#5291: 23.1.91; "bzr status" FAILED @ 2010-01-02 17:43 ` Eli Zaretskii 2010-01-02 20:47 ` Dan Nicolaescu 2010-01-09 8:07 ` bug#5291: marked as done (23.1.91; "bzr status" FAILED) Emacs bug Tracking System 0 siblings, 2 replies; 9+ messages in thread From: Eli Zaretskii @ 2010-01-02 17:43 UTC (permalink / raw) To: emacs-pretest-bug I have set up Emacs to be the EDITOR for bzr via emacsclient (yes, I'm invoking bzr from the command line). That works, but every time I commit a file to upstream, Emacs bitches with the following message in *Messages*: vc-do-command: Running bzr status bzr_log.uuzkwa...FAILED (status 3) In GNU Emacs 23.1.91.1 (i386-mingw-nt5.1.2600) of 2009-12-31 on HOME-C4E4A596F7 Windowing system distributor `Microsoft Corp.', version 5.1.2600 configured using `configure --with-gcc (3.4)' Important settings: value of $LC_ALL: nil value of $LC_COLLATE: nil value of $LC_CTYPE: nil value of $LC_MESSAGES: nil value of $LC_MONETARY: nil value of $LC_NUMERIC: nil value of $LC_TIME: nil value of $LANG: ENU value of $XMODIFIERS: nil locale-coding-system: cp1255 default enable-multibyte-characters: t Major mode: Mail Minor modes in effect: flyspell-mode: t desktop-save-mode: t show-paren-mode: t display-time-mode: t tooltip-mode: t mouse-wheel-mode: t tool-bar-mode: t menu-bar-mode: t file-name-shadow-mode: t global-font-lock-mode: t font-lock-mode: t blink-cursor-mode: t global-auto-composition-mode: t auto-composition-mode: t auto-encryption-mode: t auto-compression-mode: t temp-buffer-resize-mode: t line-number-mode: t abbrev-mode: t Recent input: C-u - 7 C-x <tab> <up> <up> <right> <delete> <delete> <down> <down> <delete> C-x C-s C-x # C-x b * M e s s <tab> <return> C-a C-SPC C-e M-w C-x b <return> <C-prior> <C-prior> <C-prior> <C-prior> <C-prior> <C-prior> <C-prior> <C-prior> <C-prior> C-x k <return> C-x b I N B <tab> <return> <M-home> C-x k <return> C-x b <M-up> <up> <down> <down> <up> <up> <up> <M-right> - <tab> <return> <M-end> <help-echo> <help-echo> <help-echo> m C-y C-x C-x <delete> <delete> <delete> 4 6 6 8 <down> <switch-frame> <switch-frame> <right> R e : S-SPC C-y <right> <down> <down> <down> T h a n k s , SPC I S-SPC m a d e SPC t h e SPC a u t o - g e n e r a t e d SPC d o c SPC s t r i n g <C-left> <C-left> <C-left> <C-left> <left> SPC l i n e s SPC i n SPC t h e SPC t e m p l a t e SPC u s e d SPC f o r <M-right> s SPC s <backspace> <backspace> <up> <C-right> <C-right> <C-right> <C-right> SPC s h o r t e r M-q <down> . <down> <return> C-c C-s <help-echo> <help-echo> <help-echo> <switch-frame> m e m a c s - d e v e l @ g n u . o r g <down> <C-end> <return> C-y M-y M-y <up> <up> <up> <up> <up> " b z r SPC s t a t u s " S-SPC F A I L E D <down> <down> <down> <down> <return> <up> <up> <up> <up> <up> <up> <right> <right> <right> <right> <delete> <delete> <delete> <delete> <delete> <delete> <delete> <delete> <delete> <delete> <delete> M-! C-g M-~ <switch-frame> <switch-frame> M-x r e p o r t - e m <tab> <return> Recent messages: Wrote d:/gnu/bzr/emacs/trunk/bzr_log.uuzkwa vc-do-command: Running bzr status bzr_log.uuzkwa...FAILED (status 3) Mark set [3 times] Sending... Added to d:/usr/eli/rmail/SENT.MAIL Sending...done Mark set [2 times] Auto-saving...done Quit Modification-flag cleared Load-path shadows: None found. Features: (shadow emacsbug rmailmm vc-dispatcher add-log tar-mode mule-util ebuff-menu electric vc-bzr help-mode view rmailout dabbrev multi-isearch auth-source message ecomplete rfc822 mml mml-sec password-cache mm-decode mm-bodies mm-encode mailcap mail-parse rfc2231 rfc2047 rfc2045 qp ietf-drums nnheader gnus-util netrc mm-util mail-prsvr gmm-utils wid-edit mailheader canlock sha1 hex-util hashcash smtpmail mailalias mailabbrev sendmail conf-mode newcomment ld-script sh-script executable dired-x dired-aux dired tcl generic nxml-uchnm rng-xsd xsd-regexp rng-cmpct rng-nxml rng-valid rng-loc rng-uri rng-parse nxml-parse rng-match rng-dt rng-util rng-pttrn nxml-ns nxml-mode nxml-outln nxml-rap nxml-util nxml-glyph nxml-enc xmltok sgml-mode arc-mode archive-mode jka-compr make-mode cc-mode cc-fonts cc-menus cc-cmds cc-styles cc-align cc-engine cc-vars cc-defs regexp-opt gud comint ring parse-time vc-cvs org-wl org-w3m org-vm org-rmail org-mhe org-mew org-irc org-jsinfo org-infojs org-html org-exp org-exp-blocks org-agenda org-info org-gnus org-bibtex org-bbdb org byte-opt bytecomp byte-compile advice help-fns advice-preload org-footnote org-src org-list org-faces org-compat org-macs time-date noutline outline easy-mmode info easymenu flyspell ispell rmailsum rmail mail-utils desktop server filecache saveplace generic-x paren battery time tooltip ediff-hook vc-hooks lisp-float-type mwheel dos-w32 disp-table ls-lisp w32-win w32-vars tool-bar dnd fontset image fringe lisp-mode register page menu-bar rfn-eshadow timer select scroll-bar mldrag mouse jit-lock font-lock syntax facemenu font-core frame cham georgian utf-8-lang misc-lang vietnamese tibetan thai tai-viet lao korean japanese hebrew greek romanian slovak czech european ethiopic indian cyrillic chinese case-table epa-hook jka-cmpr-hook help simple abbrev loaddefs button minibuffer faces cus-face files text-properties overlay md5 base64 format env code-pages mule custom widget hashtable-print-readable backquote make-network-process multi-tty emacs) ^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#5291: 23.1.91; "bzr status" FAILED 2010-01-02 17:43 ` bug#5291: 23.1.91; "bzr status" FAILED Eli Zaretskii @ 2010-01-02 20:47 ` Dan Nicolaescu 2010-01-02 21:40 ` Eli Zaretskii 2010-01-09 8:07 ` bug#5291: marked as done (23.1.91; "bzr status" FAILED) Emacs bug Tracking System 1 sibling, 1 reply; 9+ messages in thread From: Dan Nicolaescu @ 2010-01-02 20:47 UTC (permalink / raw) To: Eli Zaretskii; +Cc: 5291 Eli Zaretskii <eliz@gnu.org> writes: > I have set up Emacs to be the EDITOR for bzr via emacsclient (yes, I'm > invoking bzr from the command line). That works, but every time I > commit a file to upstream, Emacs bitches with the following message in > *Messages*: > > vc-do-command: Running bzr status bzr_log.uuzkwa...FAILED (status 3) Do you get a backtrace if you set debug-on-error? ^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#5291: 23.1.91; "bzr status" FAILED 2010-01-02 20:47 ` Dan Nicolaescu @ 2010-01-02 21:40 ` Eli Zaretskii 2010-01-02 21:56 ` Lennart Borgman 2010-01-02 22:17 ` Dan Nicolaescu 0 siblings, 2 replies; 9+ messages in thread From: Eli Zaretskii @ 2010-01-02 21:40 UTC (permalink / raw) To: Dan Nicolaescu; +Cc: 5291 > Date: Sat, 2 Jan 2010 12:47:00 -0800 (PST) > From: Dan Nicolaescu <dann@ics.uci.edu> > Cc: 5291@debbugs.gnu.org > > Eli Zaretskii <eliz@gnu.org> writes: > > > I have set up Emacs to be the EDITOR for bzr via emacsclient (yes, I'm > > invoking bzr from the command line). That works, but every time I > > commit a file to upstream, Emacs bitches with the following message in > > *Messages*: > > > > vc-do-command: Running bzr status bzr_log.uuzkwa...FAILED (status 3) > > Do you get a backtrace if you set debug-on-error? Yes, see below. AFAICT, it shouldn't even try to run "bzr status" on this file, since it's a temporary file used by bzr for the commit message. But if it somehow must run "bzr status", then it shouldn't signal an error when it predictably fails. But maybe I'm missing something. Debugger entered--Lisp error: (error "Running bzr status bzr_log.ahvp69...FAILED (status 3)") signal(error ("Running bzr status bzr_log.ahvp69...FAILED (status 3)")) error("Running %s...FAILED (%s)" "bzr status bzr_log.ahvp69" "status 3") vc-do-command(t 0 "bzr" "d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69" "status") apply(vc-do-command t 0 "bzr" "d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69" "status" nil) vc-bzr-command("status" t 0 "d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") vc-bzr-status("d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") vc-bzr-state("d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") vc-bzr-state-heuristic("d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") vc-bzr-registered("d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") apply(vc-bzr-registered "d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") vc-call-backend(Bzr registered "d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") #[(b) "\302\b\303 #\205\x14\304 \305\b#\205\x14\306\307\310\"\207" [b file vc-call-backend registered vc-file-setprop vc-backend throw found t] 4](Bzr) mapc(#[(b) "\302\b\303 #\205\x14\304 \305\b#\205\x14\306\307\310\"\207" [b file vc-call-backend registered vc-file-setprop vc-backend throw found t] 4] (RCS CVS SVN SCCS Bzr Git Hg Mtn Arch)) byte-code("\303\b\304\"\x19\305\306 \203\x11 \307=\203\x15\n\202\x18 \nB\"\210)\310\b\304\307#\210\311\207" [file backend vc-handled-backends vc-file-getprop vc-backend mapc #[(b) "\302\b\303 #\205\x14\304 \305\b#\205\x14\306\307\310\"\207" [b file vc-call-backend registered vc-file-setprop vc-backend throw found t] 4] none vc-file-setprop nil] 4) vc-registered("d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") vc-backend("d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") vc-after-save() basic-save-buffer() save-buffer(1) call-interactively(save-buffer nil nil) ^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#5291: 23.1.91; "bzr status" FAILED 2010-01-02 21:40 ` Eli Zaretskii @ 2010-01-02 21:56 ` Lennart Borgman 2010-01-02 22:17 ` Dan Nicolaescu 1 sibling, 0 replies; 9+ messages in thread From: Lennart Borgman @ 2010-01-02 21:56 UTC (permalink / raw) To: Eli Zaretskii, 5291; +Cc: Dan Nicolaescu Looks like the "binary chars" in this message made it hard to read, at least on gmail. On Sat, Jan 2, 2010 at 10:40 PM, Eli Zaretskii <eliz@gnu.org> wrote: >> Date: Sat, 2 Jan 2010 12:47:00 -0800 (PST) > From: Dan Nicolaescu <dann@ics.uci.edu> > Cc: 5291@debbugs.gnu.org > Eli Zaretskii <eliz@gnu.org> writes: > > I have set up Emacs to be the EDITOR for bzr via emacsclient (yes, I'm > > invoking bzr from the command line). That works, but every time I > > commit a file to upstream, Emacs bitches with the following message in > > *Messages*: > > > > vc-do-command: Running bzr status bzr_log.uuzkwa...FAILED (status 3) > Do you get a backtrace if you set debug-on-error? Yes, see below. AFAICT, it shouldn't even try to run "bzr status" on this file, since it's a temporary file used by bzr for the commit message. But if it somehow must run "bzr status", then it shouldn't signal an error when it predictably fails. But maybe I'm missing something. Debugger entered--Lisp error: (error "Running bzr status bzr_log.ahvp69...FAILED (status 3)") signal(error ("Running bzr status ... ^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#5291: 23.1.91; "bzr status" FAILED 2010-01-02 21:40 ` Eli Zaretskii 2010-01-02 21:56 ` Lennart Borgman @ 2010-01-02 22:17 ` Dan Nicolaescu 2010-01-03 4:09 ` Eli Zaretskii 1 sibling, 1 reply; 9+ messages in thread From: Dan Nicolaescu @ 2010-01-02 22:17 UTC (permalink / raw) To: Eli Zaretskii; +Cc: 5291 Eli Zaretskii <eliz@gnu.org> writes: > > Date: Sat, 2 Jan 2010 12:47:00 -0800 (PST) > > From: Dan Nicolaescu <dann@ics.uci.edu> > > Cc: 5291@debbugs.gnu.org > > > > Eli Zaretskii <eliz@gnu.org> writes: > > > > > I have set up Emacs to be the EDITOR for bzr via emacsclient (yes, I'm > > > invoking bzr from the command line). That works, but every time I > > > commit a file to upstream, Emacs bitches with the following message in > > > *Messages*: > > > > > > vc-do-command: Running bzr status bzr_log.uuzkwa...FAILED (status 3) > > > > Do you get a backtrace if you set debug-on-error? > > Yes, see below. > > AFAICT, it shouldn't even try to run "bzr status" on this file, since > it's a temporary file used by bzr for the commit message. But if it > somehow must run "bzr status", then it shouldn't signal an error when > it predictably fails. But maybe I'm missing something. > > Debugger entered--Lisp error: (error "Running bzr status bzr_log.ahvp69...FAILED (status 3)") > signal(error ("Running bzr status bzr_log.ahvp69...FAILED (status 3)")) > error("Running %s...FAILED (%s)" "bzr status bzr_log.ahvp69" "status 3") > vc-do-command(t 0 "bzr" "d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69" "status") > apply(vc-do-command t 0 "bzr" "d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69" "status" nil) > vc-bzr-command("status" t 0 "d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") > vc-bzr-status("d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") > vc-bzr-state("d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") > vc-bzr-state-heuristic("d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") > vc-bzr-registered("d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") > apply(vc-bzr-registered "d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") > vc-call-backend(Bzr registered "d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") > #[(b) "\302\b\303 #\205\x14\304 \305\b#\205\x14\306\307\310\"\207" [b file vc-call-backend registered vc-file-setprop vc-backend throw found t] 4](Bzr) > mapc(#[(b) "\302\b\303 #\205\x14\304 \305\b#\205\x14\306\307\310\"\207" [b file vc-call-backend registered vc-file-setprop vc-backend throw found t] 4] (RCS CVS SVN SCCS Bzr Git Hg Mtn Arch)) > byte-code("\303\b\304\"\x19\305\306 \203\x11 \307=\203\x15\n\202\x18 \nB\"\210)\310\b\304\307#\210\311\207" [file backend vc-handled-backends vc-file-getprop vc-backend mapc #[(b) "\302\b\303 #\205\x14\304 \305\b#\205\x14\306\307\310\"\207" [b file vc-call-backend registered vc-file-setprop vc-backend throw found t] 4] none vc-file-setprop nil] 4) > vc-registered("d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") > vc-backend("d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69") > vc-after-save() > basic-save-buffer() > save-buffer(1) > call-interactively(save-buffer nil nil) Strange. What exactly creates the d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69 file? Is your TEMP set to d:/gnu/bzr/emacs/trunk/ ? I think that if you change: (vc-bzr-command "status" t 0 file) to: (vc-bzr-command "status" t 3 file) in vc-bzr-status it should work, but I am not 100% sure that's TRTD. ^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#5291: 23.1.91; "bzr status" FAILED 2010-01-02 22:17 ` Dan Nicolaescu @ 2010-01-03 4:09 ` Eli Zaretskii 2010-01-03 18:39 ` Eli Zaretskii 0 siblings, 1 reply; 9+ messages in thread From: Eli Zaretskii @ 2010-01-03 4:09 UTC (permalink / raw) To: Dan Nicolaescu; +Cc: 5291 > Date: Sat, 2 Jan 2010 14:17:30 -0800 (PST) > From: Dan Nicolaescu <dann@ics.uci.edu> > Cc: 5291@debbugs.gnu.org > > What exactly creates the d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69 file? "bzr commit" does. This file is where it puts the list of files to be committed, then submits it to $EDITOR (in my case, emacsclient), and expects me to insert the commit message there. After "bzr commit" is done (i.e., the changes committed), this file is deleted by bzr. > Is your TEMP set to d:/gnu/bzr/emacs/trunk/ ? No. AFAIU, bzr creates these temporary files in the directory where you run "bzr commit". I see these files created in the current directory on GNU/Linux as well, although I will have to check if the same problem happens there as well as on Windows. > I think that if you change: > (vc-bzr-command "status" t 0 file) > to: > (vc-bzr-command "status" t 3 file) > in vc-bzr-status > it should work, but I am not 100% sure that's TRTD. OK, I will look into this when I have a chance. Thanks. Do you (or someone else) know where can I find the documentation of status code returned by bzr? ^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#5291: 23.1.91; "bzr status" FAILED 2010-01-03 4:09 ` Eli Zaretskii @ 2010-01-03 18:39 ` Eli Zaretskii 2010-01-03 20:10 ` Dan Nicolaescu 0 siblings, 1 reply; 9+ messages in thread From: Eli Zaretskii @ 2010-01-03 18:39 UTC (permalink / raw) To: 5291; +Cc: Dan Nicolaescu > Date: Sun, 03 Jan 2010 06:09:58 +0200 > From: Eli Zaretskii <eliz@gnu.org> > Cc: 5291@debbugs.gnu.org > > > Date: Sat, 2 Jan 2010 14:17:30 -0800 (PST) > > From: Dan Nicolaescu <dann@ics.uci.edu> > > Cc: 5291@debbugs.gnu.org > > > > What exactly creates the d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69 file? > > "bzr commit" does. This file is where it puts the list of files to be > committed, then submits it to $EDITOR (in my case, emacsclient), and > expects me to insert the commit message there. After "bzr commit" is > done (i.e., the changes committed), this file is deleted by bzr. > > > Is your TEMP set to d:/gnu/bzr/emacs/trunk/ ? > > No. AFAIU, bzr creates these temporary files in the directory where > you run "bzr commit". I see these files created in the current > directory on GNU/Linux as well, although I will have to check if the > same problem happens there as well as on Windows. > > > I think that if you change: > > (vc-bzr-command "status" t 0 file) > > to: > > (vc-bzr-command "status" t 3 file) > > in vc-bzr-status > > it should work, but I am not 100% sure that's TRTD. > > OK, I will look into this when I have a chance. Thanks. I found the problem. It seems to be Windows-specific. (I cannot reproduce it on GNU/Linux, but I have a slightly different version of Bazaar there, so it could be bzr-version specific as well. Still, the nature of the problem (see below) makes it a safe bet that it exists only on Windows.) The detailed reason for the failure is found in the .bzr.log file: LockContention: Could not acquire lock "D:/gnu/bzr/emacs/test/.bzr/checkout/dirstate": (32, 'CreateFileW', 'The process cannot access the file because it is being used by another process.') What happens is evidently this: . I run "bzr ci", which locks dirstate and launches emacsclient to edit the commit message that it puts on a temporary file bzr_log.FOO in the directory where I run "bzr ci". . The file with the commit message pops up in Emacs, where I edit it. . When I'm done editing, I save the bzr_log.FOO file. . Emacs then run "bzr status bzr_log.FOO" as a side effect of C-x C-s, because the file is inside a versioned directory. This "bzr status" tries to lock dirstate again, which fails, because Windows fails the CreateFileW system call due to sharing issues. I could probably submit a bug for Bazaar, but they would probably say that Emacs is to blame as well as Bazaar: it is Emacs who invokes the second instance of bzr while the first is still running. It would be nice if I could tell Bazaar to put those bzr_log.FOO files under $TMPDIR, but there doesn't seem to be a way of doing that. Anyone? Any ideas for how best to resolve this? > Do you (or someone else) know where can I find the documentation of > status code returned by bzr? To answer my own question: exit status 3 means that there was some fatal exception or error in running the command. When that happens, bzr writes a full traceback to .bzr.log file, so one should look there for that info. ^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#5291: 23.1.91; "bzr status" FAILED 2010-01-03 18:39 ` Eli Zaretskii @ 2010-01-03 20:10 ` Dan Nicolaescu 0 siblings, 0 replies; 9+ messages in thread From: Dan Nicolaescu @ 2010-01-03 20:10 UTC (permalink / raw) To: Eli Zaretskii; +Cc: 5291 Eli Zaretskii <eliz@gnu.org> writes: > > Date: Sun, 03 Jan 2010 06:09:58 +0200 > > From: Eli Zaretskii <eliz@gnu.org> > > Cc: 5291@debbugs.gnu.org > > > > > Date: Sat, 2 Jan 2010 14:17:30 -0800 (PST) > > > From: Dan Nicolaescu <dann@ics.uci.edu> > > > Cc: 5291@debbugs.gnu.org > > > > > > What exactly creates the d:/gnu/bzr/emacs/trunk/bzr_log.ahvp69 file? > > > > "bzr commit" does. This file is where it puts the list of files to be > > committed, then submits it to $EDITOR (in my case, emacsclient), and > > expects me to insert the commit message there. After "bzr commit" is > > done (i.e., the changes committed), this file is deleted by bzr. > > > > > Is your TEMP set to d:/gnu/bzr/emacs/trunk/ ? > > > > No. AFAIU, bzr creates these temporary files in the directory where > > you run "bzr commit". I see these files created in the current > > directory on GNU/Linux as well, although I will have to check if the > > same problem happens there as well as on Windows. > > > > > I think that if you change: > > > (vc-bzr-command "status" t 0 file) > > > to: > > > (vc-bzr-command "status" t 3 file) > > > in vc-bzr-status > > > it should work, but I am not 100% sure that's TRTD. > > > > OK, I will look into this when I have a chance. Thanks. > > I found the problem. It seems to be Windows-specific. (I cannot > reproduce it on GNU/Linux, but I have a slightly different version of > Bazaar there, so it could be bzr-version specific as well. Still, the > nature of the problem (see below) makes it a safe bet that it exists > only on Windows.) > > The detailed reason for the failure is found in the .bzr.log file: > > LockContention: Could not acquire lock "D:/gnu/bzr/emacs/test/.bzr/checkout/dirstate": (32, 'CreateFileW', 'The process cannot access the file because it is being used by another process.') > > What happens is evidently this: > > . I run "bzr ci", which locks dirstate and launches emacsclient to > edit the commit message that it puts on a temporary file > bzr_log.FOO in the directory where I run "bzr ci". > > . The file with the commit message pops up in Emacs, where I edit it. > > . When I'm done editing, I save the bzr_log.FOO file. > > . Emacs then run "bzr status bzr_log.FOO" as a side effect of C-x > C-s, because the file is inside a versioned directory. This "bzr > status" tries to lock dirstate again, which fails, because Windows > fails the CreateFileW system call due to sharing issues. > > I could probably submit a bug for Bazaar, but they would probably say > that Emacs is to blame as well as Bazaar: it is Emacs who invokes the > second instance of bzr while the first is still running. It seems that this is actually a combination of bzr "features": putting a temporary file in a versioned directory plus the fact that "bzr status" blocks when a commit is in progress (i.e. a read lock blocks when a write lock is on). > It would be nice if I could tell Bazaar to put those bzr_log.FOO files > under $TMPDIR, but there doesn't seem to be a way of doing that. > Anyone? > > Any ideas for how best to resolve this? Not sure we want to do something in emacs about this, it looks like bzr needs fixing. ^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#5291: marked as done (23.1.91; "bzr status" FAILED) 2010-01-02 17:43 ` bug#5291: 23.1.91; "bzr status" FAILED Eli Zaretskii 2010-01-02 20:47 ` Dan Nicolaescu @ 2010-01-09 8:07 ` Emacs bug Tracking System 1 sibling, 0 replies; 9+ messages in thread From: Emacs bug Tracking System @ 2010-01-09 8:07 UTC (permalink / raw) To: Eli Zaretskii; +Cc: emacs-bug-tracker [-- Attachment #1: Type: text/plain, Size: 809 bytes --] Your message dated Sat, 09 Jan 2010 10:05:44 +0200 with message-id <83637baejr.fsf@gnu.org> and subject line Re: bug#5291: 23.1.91; "bzr status" FAILED has caused the Emacs bug report #5291, regarding 23.1.91; "bzr status" FAILED to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact bug-gnu-emacs@gnu.org immediately.) -- 5291: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=5291 Emacs Bug Tracking System Contact bug-gnu-emacs@gnu.org with problems [-- Attachment #2: Type: message/rfc822, Size: 8043 bytes --] From: Eli Zaretskii <eliz@gnu.org> To: emacs-pretest-bug@gnu.org Subject: 23.1.91; "bzr status" FAILED Date: Sat, 02 Jan 2010 19:43:18 +0200 Message-ID: <83d41se72h.fsf@gnu.org> I have set up Emacs to be the EDITOR for bzr via emacsclient (yes, I'm invoking bzr from the command line). That works, but every time I commit a file to upstream, Emacs bitches with the following message in *Messages*: vc-do-command: Running bzr status bzr_log.uuzkwa...FAILED (status 3) In GNU Emacs 23.1.91.1 (i386-mingw-nt5.1.2600) of 2009-12-31 on HOME-C4E4A596F7 Windowing system distributor `Microsoft Corp.', version 5.1.2600 configured using `configure --with-gcc (3.4)' Important settings: value of $LC_ALL: nil value of $LC_COLLATE: nil value of $LC_CTYPE: nil value of $LC_MESSAGES: nil value of $LC_MONETARY: nil value of $LC_NUMERIC: nil value of $LC_TIME: nil value of $LANG: ENU value of $XMODIFIERS: nil locale-coding-system: cp1255 default enable-multibyte-characters: t Major mode: Mail Minor modes in effect: flyspell-mode: t desktop-save-mode: t show-paren-mode: t display-time-mode: t tooltip-mode: t mouse-wheel-mode: t tool-bar-mode: t menu-bar-mode: t file-name-shadow-mode: t global-font-lock-mode: t font-lock-mode: t blink-cursor-mode: t global-auto-composition-mode: t auto-composition-mode: t auto-encryption-mode: t auto-compression-mode: t temp-buffer-resize-mode: t line-number-mode: t abbrev-mode: t Recent input: C-u - 7 C-x <tab> <up> <up> <right> <delete> <delete> <down> <down> <delete> C-x C-s C-x # C-x b * M e s s <tab> <return> C-a C-SPC C-e M-w C-x b <return> <C-prior> <C-prior> <C-prior> <C-prior> <C-prior> <C-prior> <C-prior> <C-prior> <C-prior> C-x k <return> C-x b I N B <tab> <return> <M-home> C-x k <return> C-x b <M-up> <up> <down> <down> <up> <up> <up> <M-right> - <tab> <return> <M-end> <help-echo> <help-echo> <help-echo> m C-y C-x C-x <delete> <delete> <delete> 4 6 6 8 <down> <switch-frame> <switch-frame> <right> R e : S-SPC C-y <right> <down> <down> <down> T h a n k s , SPC I S-SPC m a d e SPC t h e SPC a u t o - g e n e r a t e d SPC d o c SPC s t r i n g <C-left> <C-left> <C-left> <C-left> <left> SPC l i n e s SPC i n SPC t h e SPC t e m p l a t e SPC u s e d SPC f o r <M-right> s SPC s <backspace> <backspace> <up> <C-right> <C-right> <C-right> <C-right> SPC s h o r t e r M-q <down> . <down> <return> C-c C-s <help-echo> <help-echo> <help-echo> <switch-frame> m e m a c s - d e v e l @ g n u . o r g <down> <C-end> <return> C-y M-y M-y <up> <up> <up> <up> <up> " b z r SPC s t a t u s " S-SPC F A I L E D <down> <down> <down> <down> <return> <up> <up> <up> <up> <up> <up> <right> <right> <right> <right> <delete> <delete> <delete> <delete> <delete> <delete> <delete> <delete> <delete> <delete> <delete> M-! C-g M-~ <switch-frame> <switch-frame> M-x r e p o r t - e m <tab> <return> Recent messages: Wrote d:/gnu/bzr/emacs/trunk/bzr_log.uuzkwa vc-do-command: Running bzr status bzr_log.uuzkwa...FAILED (status 3) Mark set [3 times] Sending... Added to d:/usr/eli/rmail/SENT.MAIL Sending...done Mark set [2 times] Auto-saving...done Quit Modification-flag cleared Load-path shadows: None found. Features: (shadow emacsbug rmailmm vc-dispatcher add-log tar-mode mule-util ebuff-menu electric vc-bzr help-mode view rmailout dabbrev multi-isearch auth-source message ecomplete rfc822 mml mml-sec password-cache mm-decode mm-bodies mm-encode mailcap mail-parse rfc2231 rfc2047 rfc2045 qp ietf-drums nnheader gnus-util netrc mm-util mail-prsvr gmm-utils wid-edit mailheader canlock sha1 hex-util hashcash smtpmail mailalias mailabbrev sendmail conf-mode newcomment ld-script sh-script executable dired-x dired-aux dired tcl generic nxml-uchnm rng-xsd xsd-regexp rng-cmpct rng-nxml rng-valid rng-loc rng-uri rng-parse nxml-parse rng-match rng-dt rng-util rng-pttrn nxml-ns nxml-mode nxml-outln nxml-rap nxml-util nxml-glyph nxml-enc xmltok sgml-mode arc-mode archive-mode jka-compr make-mode cc-mode cc-fonts cc-menus cc-cmds cc-styles cc-align cc-engine cc-vars cc-defs regexp-opt gud comint ring parse-time vc-cvs org-wl org-w3m org-vm org-rmail org-mhe org-mew org-irc org-jsinfo org-infojs org-html org-exp org-exp-blocks org-agenda org-info org-gnus org-bibtex org-bbdb org byte-opt bytecomp byte-compile advice help-fns advice-preload org-footnote org-src org-list org-faces org-compat org-macs time-date noutline outline easy-mmode info easymenu flyspell ispell rmailsum rmail mail-utils desktop server filecache saveplace generic-x paren battery time tooltip ediff-hook vc-hooks lisp-float-type mwheel dos-w32 disp-table ls-lisp w32-win w32-vars tool-bar dnd fontset image fringe lisp-mode register page menu-bar rfn-eshadow timer select scroll-bar mldrag mouse jit-lock font-lock syntax facemenu font-core frame cham georgian utf-8-lang misc-lang vietnamese tibetan thai tai-viet lao korean japanese hebrew greek romanian slovak czech european ethiopic indian cyrillic chinese case-table epa-hook jka-cmpr-hook help simple abbrev loaddefs button minibuffer faces cus-face files text-properties overlay md5 base64 format env code-pages mule custom widget hashtable-print-readable backquote make-network-process multi-tty emacs) [-- Attachment #3: Type: message/rfc822, Size: 4429 bytes --] From: Eli Zaretskii <eliz@gnu.org> To: Dan Nicolaescu <dann@ics.uci.edu> Cc: 5291-done@debbugs.gnu.org Subject: Re: bug#5291: 23.1.91; "bzr status" FAILED Date: Sat, 09 Jan 2010 10:05:44 +0200 Message-ID: <83637baejr.fsf@gnu.org> > Date: Sun, 3 Jan 2010 12:10:06 -0800 (PST) > From: Dan Nicolaescu <dann@ics.uci.edu> > Cc: 5291@debbugs.gnu.org > > It seems that this is actually a combination of bzr "features": putting > a temporary file in a versioned directory plus the fact that "bzr status" blocks > when a commit is in progress (i.e. a read lock blocks when a write lock > is on). > > > It would be nice if I could tell Bazaar to put those bzr_log.FOO files > > under $TMPDIR, but there doesn't seem to be a way of doing that. > > Anyone? > > > > Any ideas for how best to resolve this? > > Not sure we want to do something in emacs about this, it looks like bzr > needs fixing. First, it turns out this happens on GNU/Linux as well, at least if one invokes "bzr status" while "bzr ci" is waiting for emacsclient. The solution, suggested by John Arbash Meinel on the Bazaar mailing list, is to patch msgeditor.py, a bzr module, as shown in the patch below. This will cause Bazaar to create the bzr_log.* files in the system temporary directory, so Emacs will not try to run "bzr status" on it. If you are on Windows, and installed Bazaar with a standalone installer, then you will need to download from the Bazaar site the sources of Bazaar that correspond to your installed version. Then locate library.zip, remove from it bzrlib/mzgeditor.pyo, and add the patched bzrlib/mzgeditor.py. If you are on Unix or GNU system, you will need to talk to your sysadmin about replacing msgeditor with a patched version. --- bzrlib/msgeditor.py~ 2010-01-08 23:36:47.257578300 +0200 +++ bzrlib/msgeditor.py 2010-01-09 09:51:45.472750000 +0200 @@ -215,8 +215,9 @@ """ import tempfile tmp_fileno, msgfilename = tempfile.mkstemp(prefix='bzr_log.', +# dir='.', text=True) - msgfilename = osutils.basename(msgfilename) +# msgfilename = osutils.basename(msgfilename) msgfile = os.fdopen(tmp_fileno, 'w') try: if start_message is not None: ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2010-01-09 8:07 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <83637baejr.fsf@gnu.org>
2010-01-02 17:43 ` bug#5291: 23.1.91; "bzr status" FAILED Eli Zaretskii
2010-01-02 20:47 ` Dan Nicolaescu
2010-01-02 21:40 ` Eli Zaretskii
2010-01-02 21:56 ` Lennart Borgman
2010-01-02 22:17 ` Dan Nicolaescu
2010-01-03 4:09 ` Eli Zaretskii
2010-01-03 18:39 ` Eli Zaretskii
2010-01-03 20:10 ` Dan Nicolaescu
2010-01-09 8:07 ` bug#5291: marked as done (23.1.91; "bzr status" FAILED) Emacs bug Tracking System
Code repositories for project(s) associated with this external index https://git.savannah.gnu.org/cgit/emacs.git https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.