* bug#5209: 23.1.90; CC Mode version 5.31.8 does not indent properly when writing new C files
@ 2009-12-13 16:22 ` Steve Revilak
2009-12-13 20:33 ` Alan Mackenzie
2010-01-01 0:50 ` bug#5209: marked as done (23.1.90; CC Mode version 5.31.8 does not indent properly when writing new C files) Emacs bug Tracking System
0 siblings, 2 replies; 4+ messages in thread
From: Steve Revilak @ 2009-12-13 16:22 UTC (permalink / raw
To: emacs-pretest-bug
[-- Attachment #1: Type: text/plain, Size: 6337 bytes --]
Please write in English if possible, because the Emacs maintainers
usually do not have translators to read other languages for them.
Your bug report will be posted to the emacs-pretest-bug@gnu.org mailing list.
Please describe exactly what actions triggered the bug
and the precise symptoms of the bug. If you can, give
a recipe starting from `emacs -Q':
* * *
STEPS TO REPRODUCE
------------------
(1) Start emacs with the command line "emacs -nw -Q foo.c".
foo.c should be a new file, which does not exist prior to starting
emacs.
(2) Type "#include <stdio.h>" and RETURN
(3) Type RETURN to leave a blank line
(4) type "static void add_one(int * x) {" and RETURN
(5) type "*x += 1;" and RETURN
(6) type "}" and RETURN (to close the function definition)
NOTE: the statement written in step (5) is left-aligned to column
zero. The statement should be indented.
(7) Place point in column zero of the line "*x += 1;". Press TAB.
Before pressing TAB, "*x += 1;" is aligned to column zero. After
pressing TAB, "*x += 1;" is still aligned to column zero. TAB did
not indent the statement.
(8) Type "C-x h TAB" (i.e., to select and re-indent the entire
buffer).
The minibuffer displays "Indenting region... done". However, the
statement "*x += 1;" is still aligned to column zero.
After step 8, buffer "foo.c" looks like this:
---------------------------------
#include <stdio.h>
static void add_one(int * x) {
*x += 1;
}
---------------------------------
NOTE: the fourth line is not indented (but it should be).
NOTES:
-----
In buffer "foo.c", "M-x describe-key RET TAB" produces:
---------------------------------
TAB runs the command c-indent-line-or-region, which is an interactive
compiled Lisp function in `cc-cmds.el'.
It is bound to TAB, <menu-bar> <C> <Indent Line or Region>.
(c-indent-line-or-region &optional ARG REGION)
Indent active region, current line, or block starting on this line.
In Transient Mark mode, when the region is active, reindent the region.
Otherwise, with a prefix argument, rigidly reindent the expression
starting on the current line.
Otherwise reindent just the current line.
---------------------------------
NOTE: In step (8), when the entire buffer was selected, with transient
mark mode enabled, TAB did not re-indent the region correctly.
Likewise, in step (7) TAB did not re-indent the current line
("Otherwise reindent just the current line").
In buffer "foo.c", "M-x desribe-mode" produces:
---------------------------------
Enabled minor modes: Abbrev Auto-Composition Auto-Compression
Auto-Encryption File-Name-Shadow Font-Lock Global-Auto-Composition
Global-Font-Lock Line-Number Menu-Bar Mouse-Wheel Tool-Bar Tooltip
Transient-Mark
(Information about these minor modes follows the major mode info.)
C/l mode:
Major mode for editing K&R and ANSI C code.
To submit a problem report, enter `C-c C-b' from a
c-mode buffer. This automatically sets up a mail buffer with version
information already added. You just need to add a description of the
problem, including a reproducible test case, and send the message.
To see what version of CC Mode you are running, enter `M-x c-version'.
The hook `c-mode-common-hook' is run with no args at mode
initialization, then `c-mode-hook'.
[rest of describe-mode output omitted]
---------------------------------
M-x c-version produces the following:
---------------------------------
Using CC Mode version 5.31.8
---------------------------------
Finally, the same behavior occurs when emacs is started as "emacs -Q"
(i.e., if the -nw option is ommitted from the command line).
* * *
If Emacs crashed, and you have the Emacs process in the gdb debugger,
please include the output from the following gdb commands:
`bt full' and `xbacktrace'.
For information about debugging Emacs, please read the file
/Applications/Emacs.app/Contents/Resources/etc/DEBUG.
In GNU Emacs 23.1.90.1 (i386-apple-darwin9.8.0, NS apple-appkit-949.54)
of 2009-12-09 on oatmeal.ma.runwaynine.com
Windowing system distributor `Apple', version 10.3.949
configured using `configure '--with-ns''
Important settings:
value of $LC_ALL: nil
value of $LC_COLLATE: C
value of $LC_CTYPE: nil
value of $LC_MESSAGES: nil
value of $LC_MONETARY: nil
value of $LC_NUMERIC: nil
value of $LC_TIME: nil
value of $LANG: nil
value of $XMODIFIERS: nil
locale-coding-system: nil
default enable-multibyte-characters: t
Major mode: Lisp Interaction
Minor modes in effect:
tooltip-mode: t
mouse-wheel-mode: t
tool-bar-mode: t
menu-bar-mode: t
file-name-shadow-mode: t
global-font-lock-mode: t
font-lock-mode: t
global-auto-composition-mode: t
auto-composition-mode: t
auto-encryption-mode: t
auto-compression-mode: t
line-number-mode: t
transient-mark-mode: t
Recent input:
ESC x r e p o r t - e m a c s - b u TAB RET
Recent messages:
("/Applications/Emacs.app/Contents/MacOS/Emacs")
For information about GNU Emacs and the GNU system, type C-h C-a.
Load-path shadows:
None found.
Features:
(shadow mail-extr message ecomplete rfc822 mml mml-sec password-cache
mm-decode mm-bodies mm-encode mailcap mail-parse rfc2231 rfc2047 rfc2045
qp ietf-drums mailabbrev nnheader gnus-util netrc time-date mm-util
mail-prsvr gmm-utils wid-edit mailheader canlock sha1 hex-util hashcash
mail-utils warnings emacsbug sendmail regexp-opt tooltip ediff-hook
vc-hooks lisp-float-type mwheel ns-win easymenu tool-bar dnd fontset
image fringe lisp-mode register page menu-bar rfn-eshadow timer select
scroll-bar mldrag mouse jit-lock font-lock syntax facemenu font-core
frame cham georgian utf-8-lang misc-lang vietnamese tibetan thai
tai-viet lao korean japanese hebrew greek romanian slovak czech european
ethiopic indian cyrillic chinese case-table epa-hook jka-cmpr-hook help
simple abbrev loaddefs button minibuffer faces cus-face text-properties
overlay md5 base64 format env code-pages mule custom widget
hashtable-print-readable backquote make-network-process ns multi-tty
emacs)
[-- Attachment #2: Type: application/pgp-signature, Size: 195 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* bug#5209: 23.1.90; CC Mode version 5.31.8 does not indent properly when writing new C files
2009-12-13 16:22 ` bug#5209: 23.1.90; CC Mode version 5.31.8 does not indent properly when writing new C files Steve Revilak
@ 2009-12-13 20:33 ` Alan Mackenzie
2009-12-14 1:17 ` Steve Revilak
2010-01-01 0:50 ` bug#5209: marked as done (23.1.90; CC Mode version 5.31.8 does not indent properly when writing new C files) Emacs bug Tracking System
1 sibling, 1 reply; 4+ messages in thread
From: Alan Mackenzie @ 2009-12-13 20:33 UTC (permalink / raw
To: Steve Revilak, 5209; +Cc: emacs-pretest-bug
Hi, Steve,
On Sun, Dec 13, 2009 at 11:22:10AM -0500, Steve Revilak wrote:
> STEPS TO REPRODUCE
> ------------------
> (1) Start emacs with the command line "emacs -nw -Q foo.c".
> foo.c should be a new file, which does not exist prior to starting
> emacs.
> (2) Type "#include <stdio.h>" and RETURN
> (3) Type RETURN to leave a blank line
> (4) type "static void add_one(int * x) {" and RETURN
> (5) type "*x += 1;" and RETURN
> (6) type "}" and RETURN (to close the function definition)
> NOTE: the statement written in step (5) is left-aligned to column
> zero. The statement should be indented.
> (7) Place point in column zero of the line "*x += 1;". Press TAB.
> Before pressing TAB, "*x += 1;" is aligned to column zero. After
> pressing TAB, "*x += 1;" is still aligned to column zero. TAB did
> not indent the statement.
> (8) Type "C-x h TAB" (i.e., to select and re-indent the entire
> buffer).
> The minibuffer displays "Indenting region... done". However, the
> statement "*x += 1;" is still aligned to column zero.
> After step 8, buffer "foo.c" looks like this:
> ---------------------------------
> #include <stdio.h>
> static void add_one(int * x) {
> *x += 1;
> }
> ---------------------------------
> NOTE: the fourth line is not indented (but it should be).
First thing, thanks for such a simple and clear bug report.
There is a bug in `c-parse-state', one of the low-level functions in CC
mode, which generates and changes a cache of brace and paren positions.
Would you apply the following patch, and test it, please. If anything is
still wrong, please let me know again.
*** cc-engine.orig.el 2009-12-13 19:43:27.268817800 +0000
--- cc-engine.el 2009-12-13 20:06:47.819901672 +0000
***************
*** 2231,2236 ****
--- 2231,2249 ----
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Defuns which analyse the buffer, yet don't change `c-state-cache'.
+ (defun c-p1-not-in-p0-macro (p0 p1)
+ ;; Is P0 in a CPP construct and p1 not in it?
+ (save-restriction
+ (widen)
+ (save-excursion
+ (let ((p0-macro-begin
+ (progn (goto-char p0) (and (c-beginning-of-macro) (point)))))
+ (and p0-macro-begin
+ (not
+ (eq p0-macro-begin
+ (progn (goto-char p1) (and (c-beginning-of-macro) (point)))))
+ )))))
+
(defun c-get-fallback-scan-pos (here)
;; Return a start position for building `c-state-cache' from
;; scratch. This will be at the top level, 2 defuns back.
***************
*** 2587,2593 ****
;; o - SCAN-BACK-POS, if not nil, indicates there may be a brace pair
;; preceding POS which needs to be recorded in `c-state-cache'. It is a
;; position to scan backwards from.
! ;; o - PPS-STATE is the parse-partial-sexp state at PPS-POINT.
(save-restriction
(narrow-to-region 1 (point-max))
(save-excursion
--- 2600,2607 ----
;; o - SCAN-BACK-POS, if not nil, indicates there may be a brace pair
;; preceding POS which needs to be recorded in `c-state-cache'. It is a
;; position to scan backwards from.
! ;; o - PPS-STATE is the parse-partial-sexp state at PPS-POINT or nil if we
! ;; don't scan past PPS-POINT.
(save-restriction
(narrow-to-region 1 (point-max))
(save-excursion
***************
*** 2624,2630 ****
(< (point-max) c-state-old-cpp-end)))
(point-max)
(min (point-max) c-state-old-cpp-beg)))
! (while (and c-state-cache (> (c-state-cache-top-lparen) upper-lim))
(setq c-state-cache (cdr c-state-cache)))
;; If `upper-lim' is inside the last recorded brace pair, remove its
;; RBrace and indicate we'll need to search backwards for a previous
--- 2638,2645 ----
(< (point-max) c-state-old-cpp-end)))
(point-max)
(min (point-max) c-state-old-cpp-beg)))
! (while (and c-state-cache
! (>= (c-state-cache-top-lparen) upper-lim))
(setq c-state-cache (cdr c-state-cache)))
;; If `upper-lim' is inside the last recorded brace pair, remove its
;; RBrace and indicate we'll need to search backwards for a previous
***************
*** 2641,2647 ****
;; (car c-state-cache). There can be no open parens/braces/brackets
;; between `good-pos'/`good-pos-actual-macro-start' and (point-max),
;; due to the interface spec to this function.
! (setq pos (if good-pos-actual-macro-end
(1+ good-pos-actual-macro-end) ; get outside the macro as
; marked by a `category' text property.
good-pos))
--- 2656,2663 ----
;; (car c-state-cache). There can be no open parens/braces/brackets
;; between `good-pos'/`good-pos-actual-macro-start' and (point-max),
;; due to the interface spec to this function.
! (setq pos (if (and good-pos-actual-macro-start
! (not (eq good-pos-actual-macro-start in-macro-start)))
(1+ good-pos-actual-macro-end) ; get outside the macro as
; marked by a `category' text property.
good-pos))
***************
*** 2701,2707 ****
(setq c-state-cache (cons (cons pair-beg pos)
c-state-cache)))
! (list pos scan-back-pos pps-state)))))
(defun c-remove-stale-state-cache-backwards (here cache-pos)
;; Strip stale elements of `c-state-cache' by moving backwards through the
--- 2717,2723 ----
(setq c-state-cache (cons (cons pair-beg pos)
c-state-cache)))
! (list pos scan-back-pos pps-point-state)))))
(defun c-remove-stale-state-cache-backwards (here cache-pos)
;; Strip stale elements of `c-state-cache' by moving backwards through the
***************
*** 2769,2777 ****
(list (1+ pos) pos t)) ; return value. We've just converted a brace
; pair entry into a { entry, so the caller
; needs to search for a brace pair before the
! ; {.
! ;; ;; `here' might be inside a literal. Check for this.
(setq lit (c-state-literal-at here)
here-lit-start (or (car lit) here)
here-lit-end (or (cdr lit) here))
--- 2785,2793 ----
(list (1+ pos) pos t)) ; return value. We've just converted a brace
; pair entry into a { entry, so the caller
; needs to search for a brace pair before the
! ; {, hence the `pos' in second last place.
! ;; `here' might be inside a literal. Check for this.
(setq lit (c-state-literal-at here)
here-lit-start (or (car lit) here)
here-lit-end (or (cdr lit) here))
***************
*** 2801,2812 ****
(setq pos pa)))) ; might signal
(if (setq ren (c-safe-scan-lists pos -1 -1 too-far-back))
;; CASE 3: After a }/)/] before `here''s BOL.
! (list (1+ ren) (and dropped-cons pos) nil) ; Return value
;; CASE 4; Best of a bad job: BOL before `here-bol', or beginning of
;; literal containing it.
(setq good-pos (c-state-lit-beg (c-point 'bopl here-bol)))
! (list good-pos (and dropped-cons good-pos) nil))))))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
--- 2817,2836 ----
(setq pos pa)))) ; might signal
(if (setq ren (c-safe-scan-lists pos -1 -1 too-far-back))
;; CASE 3: After a }/)/] before `here''s BOL.
! (list (1+ ren)
! (or (and (c-p1-not-in-p0-macro here c-state-cache-good-pos)
! here)
! (and dropped-cons pos))
! nil) ; Return value
;; CASE 4; Best of a bad job: BOL before `here-bol', or beginning of
;; literal containing it.
(setq good-pos (c-state-lit-beg (c-point 'bopl here-bol)))
! (list good-pos
! (or (and (c-p1-not-in-p0-macro here c-state-cache-good-pos)
! here)
! (and dropped-cons good-pos))
! nil))))))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
--
Alan Mackenzie (Nuremberg, Germany).
^ permalink raw reply [flat|nested] 4+ messages in thread
* bug#5209: 23.1.90; CC Mode version 5.31.8 does not indent properly when writing new C files
2009-12-13 20:33 ` Alan Mackenzie
@ 2009-12-14 1:17 ` Steve Revilak
0 siblings, 0 replies; 4+ messages in thread
From: Steve Revilak @ 2009-12-14 1:17 UTC (permalink / raw
To: Alan Mackenzie; +Cc: emacs-pretest-bug, 5209
[-- Attachment #1: Type: text/plain, Size: 947 bytes --]
<http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=5209>
>First thing, thanks for such a simple and clear bug report.
>
>There is a bug in `c-parse-state', one of the low-level functions in CC
>mode, which generates and changes a cache of brace and paren positions.
>
>Would you apply the following patch, and test it, please. If anything is
>still wrong, please let me know again.
Alan,
Glad to help, and thank you for the patch.
I applied the patch to lisp/progmodes/cc-engine.el.
Afterwards, I rebuilt emacs with
make clean
make bootstrap
make install
(perhaps more rebuilding than necessary, but I wanted to make sure
that I was getting a consistent build to test with)
After rebuilding, I repeated my earlier "Steps to Reproduce", and saw
exactly the same behavior that I reported in bug 5209 -- the patch did
not correct the indentation issue.
Sorry for the bad news :(
Steve
[-- Attachment #2: Type: application/pgp-signature, Size: 195 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* bug#5209: marked as done (23.1.90; CC Mode version 5.31.8 does not indent properly when writing new C files)
2009-12-13 16:22 ` bug#5209: 23.1.90; CC Mode version 5.31.8 does not indent properly when writing new C files Steve Revilak
2009-12-13 20:33 ` Alan Mackenzie
@ 2010-01-01 0:50 ` Emacs bug Tracking System
1 sibling, 0 replies; 4+ messages in thread
From: Emacs bug Tracking System @ 2010-01-01 0:50 UTC (permalink / raw
To: Steve Revilak; +Cc: emacs-bug-tracker
[-- Attachment #1: Type: text/plain, Size: 909 bytes --]
Your message dated Thu, 31 Dec 2009 14:39:02 -0500
with message-id <20091231193902.GB24581@srevilak.net>
and subject line Re: CC Mode version 5.31.8 does not indent properly when writing new C files
has caused the Emacs bug report #5209,
regarding 23.1.90; CC Mode version 5.31.8 does not indent properly when writing new C files
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact bug-gnu-emacs@gnu.org
immediately.)
--
5209: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=5209
Emacs Bug Tracking System
Contact bug-gnu-emacs@gnu.org with problems
[-- Attachment #2: Type: message/rfc822, Size: 8892 bytes --]
[-- Attachment #2.1.1: Type: text/plain, Size: 6337 bytes --]
Please write in English if possible, because the Emacs maintainers
usually do not have translators to read other languages for them.
Your bug report will be posted to the emacs-pretest-bug@gnu.org mailing list.
Please describe exactly what actions triggered the bug
and the precise symptoms of the bug. If you can, give
a recipe starting from `emacs -Q':
* * *
STEPS TO REPRODUCE
------------------
(1) Start emacs with the command line "emacs -nw -Q foo.c".
foo.c should be a new file, which does not exist prior to starting
emacs.
(2) Type "#include <stdio.h>" and RETURN
(3) Type RETURN to leave a blank line
(4) type "static void add_one(int * x) {" and RETURN
(5) type "*x += 1;" and RETURN
(6) type "}" and RETURN (to close the function definition)
NOTE: the statement written in step (5) is left-aligned to column
zero. The statement should be indented.
(7) Place point in column zero of the line "*x += 1;". Press TAB.
Before pressing TAB, "*x += 1;" is aligned to column zero. After
pressing TAB, "*x += 1;" is still aligned to column zero. TAB did
not indent the statement.
(8) Type "C-x h TAB" (i.e., to select and re-indent the entire
buffer).
The minibuffer displays "Indenting region... done". However, the
statement "*x += 1;" is still aligned to column zero.
After step 8, buffer "foo.c" looks like this:
---------------------------------
#include <stdio.h>
static void add_one(int * x) {
*x += 1;
}
---------------------------------
NOTE: the fourth line is not indented (but it should be).
NOTES:
-----
In buffer "foo.c", "M-x describe-key RET TAB" produces:
---------------------------------
TAB runs the command c-indent-line-or-region, which is an interactive
compiled Lisp function in `cc-cmds.el'.
It is bound to TAB, <menu-bar> <C> <Indent Line or Region>.
(c-indent-line-or-region &optional ARG REGION)
Indent active region, current line, or block starting on this line.
In Transient Mark mode, when the region is active, reindent the region.
Otherwise, with a prefix argument, rigidly reindent the expression
starting on the current line.
Otherwise reindent just the current line.
---------------------------------
NOTE: In step (8), when the entire buffer was selected, with transient
mark mode enabled, TAB did not re-indent the region correctly.
Likewise, in step (7) TAB did not re-indent the current line
("Otherwise reindent just the current line").
In buffer "foo.c", "M-x desribe-mode" produces:
---------------------------------
Enabled minor modes: Abbrev Auto-Composition Auto-Compression
Auto-Encryption File-Name-Shadow Font-Lock Global-Auto-Composition
Global-Font-Lock Line-Number Menu-Bar Mouse-Wheel Tool-Bar Tooltip
Transient-Mark
(Information about these minor modes follows the major mode info.)
C/l mode:
Major mode for editing K&R and ANSI C code.
To submit a problem report, enter `C-c C-b' from a
c-mode buffer. This automatically sets up a mail buffer with version
information already added. You just need to add a description of the
problem, including a reproducible test case, and send the message.
To see what version of CC Mode you are running, enter `M-x c-version'.
The hook `c-mode-common-hook' is run with no args at mode
initialization, then `c-mode-hook'.
[rest of describe-mode output omitted]
---------------------------------
M-x c-version produces the following:
---------------------------------
Using CC Mode version 5.31.8
---------------------------------
Finally, the same behavior occurs when emacs is started as "emacs -Q"
(i.e., if the -nw option is ommitted from the command line).
* * *
If Emacs crashed, and you have the Emacs process in the gdb debugger,
please include the output from the following gdb commands:
`bt full' and `xbacktrace'.
For information about debugging Emacs, please read the file
/Applications/Emacs.app/Contents/Resources/etc/DEBUG.
In GNU Emacs 23.1.90.1 (i386-apple-darwin9.8.0, NS apple-appkit-949.54)
of 2009-12-09 on oatmeal.ma.runwaynine.com
Windowing system distributor `Apple', version 10.3.949
configured using `configure '--with-ns''
Important settings:
value of $LC_ALL: nil
value of $LC_COLLATE: C
value of $LC_CTYPE: nil
value of $LC_MESSAGES: nil
value of $LC_MONETARY: nil
value of $LC_NUMERIC: nil
value of $LC_TIME: nil
value of $LANG: nil
value of $XMODIFIERS: nil
locale-coding-system: nil
default enable-multibyte-characters: t
Major mode: Lisp Interaction
Minor modes in effect:
tooltip-mode: t
mouse-wheel-mode: t
tool-bar-mode: t
menu-bar-mode: t
file-name-shadow-mode: t
global-font-lock-mode: t
font-lock-mode: t
global-auto-composition-mode: t
auto-composition-mode: t
auto-encryption-mode: t
auto-compression-mode: t
line-number-mode: t
transient-mark-mode: t
Recent input:
ESC x r e p o r t - e m a c s - b u TAB RET
Recent messages:
("/Applications/Emacs.app/Contents/MacOS/Emacs")
For information about GNU Emacs and the GNU system, type C-h C-a.
Load-path shadows:
None found.
Features:
(shadow mail-extr message ecomplete rfc822 mml mml-sec password-cache
mm-decode mm-bodies mm-encode mailcap mail-parse rfc2231 rfc2047 rfc2045
qp ietf-drums mailabbrev nnheader gnus-util netrc time-date mm-util
mail-prsvr gmm-utils wid-edit mailheader canlock sha1 hex-util hashcash
mail-utils warnings emacsbug sendmail regexp-opt tooltip ediff-hook
vc-hooks lisp-float-type mwheel ns-win easymenu tool-bar dnd fontset
image fringe lisp-mode register page menu-bar rfn-eshadow timer select
scroll-bar mldrag mouse jit-lock font-lock syntax facemenu font-core
frame cham georgian utf-8-lang misc-lang vietnamese tibetan thai
tai-viet lao korean japanese hebrew greek romanian slovak czech european
ethiopic indian cyrillic chinese case-table epa-hook jka-cmpr-hook help
simple abbrev loaddefs button minibuffer faces cus-face text-properties
overlay md5 base64 format env code-pages mule custom widget
hashtable-print-readable backquote make-network-process ns multi-tty
emacs)
[-- Attachment #2.1.2: Type: application/pgp-signature, Size: 195 bytes --]
[-- Attachment #3: Type: message/rfc822, Size: 3484 bytes --]
[-- Attachment #3.1.1: Type: text/plain, Size: 849 bytes --]
I've tried this test case with
GNU Emacs 23.1.91.1 (powerpc-apple-darwin8.11.0, NS apple-appkit-824.48) of 2009-12-31 on spud
GNU Emacs 23.1.91.1 (x86_64-apple-darwin10.2.0, NS apple-appkit-1038.25) of 2009-12-31 on oatmeal
GNU Emacs 23.1.91.1 (i686-pc-linux-gnu, GTK+ Version 2.18.1) of 2009-12-31 on srevilak
The indentation problem no longer occurs with Emacs 23.1.91.1.
Relative to the original "Steps to Reproduce",
* In step (5), typing the final semicolon causes the line "*x += 1;"
to be indented properly
* If I delete leading whitespace from "*x += 1;" and perform step (7),
then pressing TAB correctly indents the line.
* If I delete leading whitespace from "*x += 1;" and perform step
(8), then I find C-x h ESC C-\ correctly re-indents the entire
buffer.
Nice work!
Steve
[-- Attachment #3.1.2: Type: application/pgp-signature, Size: 195 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-01-01 0:50 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20091231193902.GB24581@srevilak.net>
2009-12-13 16:22 ` bug#5209: 23.1.90; CC Mode version 5.31.8 does not indent properly when writing new C files Steve Revilak
2009-12-13 20:33 ` Alan Mackenzie
2009-12-14 1:17 ` Steve Revilak
2010-01-01 0:50 ` bug#5209: marked as done (23.1.90; CC Mode version 5.31.8 does not indent properly when writing new C files) Emacs bug Tracking System
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.