* bug#4259: Cannot indent fortran continue statement in emacs 23 @ 2009-08-25 19:09 ` Ushnish Basu 2009-08-26 1:56 ` Glenn Morris ` (2 more replies) 0 siblings, 3 replies; 6+ messages in thread From: Ushnish Basu @ 2009-08-25 19:09 UTC (permalink / raw) To: Michael D. Prange, Glenn Morris Hello, I believe I came across a bug in the latest version of the fortran mode in emacs 23. Currently I am using version 23.1.1, but I did not have this problem with 23.0.60 from CVS. Please see the following sample code - I have arranged it as such only to illustrate the problem: subroutine first do 10 i=1,10 10 continue end do 20 i=1,100 20 continue If I run fortran-indent-line on the first continue (label 10) it works fine. However, if I run it on the second one (label 20), I get the error: fortran-check-end-prog-re: Lisp nesting exceeds 'max-lisp-eval-depth' presumably because it is after the 'end' If I increase max-lisp-eval-depth (and max-specpdl-size) to 10000, then I get the error fortran-check-end-prog-re: Variable binding depth exceeds max-specpdl-size Is this something that has been fixed in CVS? I look forward to hearing back from you. Thanks, Ushnish ^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#4259: Cannot indent fortran continue statement in emacs 23 2009-08-25 19:09 ` bug#4259: Cannot indent fortran continue statement in emacs 23 Ushnish Basu @ 2009-08-26 1:56 ` Glenn Morris 2009-08-26 16:59 ` Ushnish Basu 2009-08-30 1:45 ` bug#4259: marked as done (Cannot indent fortran continue statement in emacs 23) Emacs bug Tracking System [not found] ` <handler.4259.D4259.125159643616456.notifdone@emacsbugs.donarmstrong.com> 2 siblings, 1 reply; 6+ messages in thread From: Glenn Morris @ 2009-08-26 1:56 UTC (permalink / raw) To: Ushnish Basu; +Cc: 4259 Please use M-x report-emacs-bug to report Emacs bugs, rather than sending mail to addresses in the source files. Ushnish Basu wrote (on Tue, 25 Aug 2009 at 12:09 -0700): > Currently I am using version 23.1.1, but I did not have this problem > with 23.0.60 from CVS. [...] > subroutine first > do 10 i=1,10 > 10 continue > end > do 20 i=1,100 > 20 continue > > If I run fortran-indent-line on the first continue (label 10) it works > fine. However, if I run it on the second one (label 20), I get the error: > > fortran-check-end-prog-re: Lisp nesting exceeds 'max-lisp-eval-depth' The example does not look like valid Fortran, so I'm not too bothered if fortran-mode cannot indent it (although an infinite loop is not a nice way to fail). Do you have a minimum example of a valid Fortran file that fails in this way? The problem is another (see eg bug #2106) infinite loop in end-of-defun, when called from the start of the "20" line. It's not immediately obvious to me whether this is a problem in fortran-mode or in end-of-defun. ^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#4259: Cannot indent fortran continue statement in emacs 23 2009-08-26 1:56 ` Glenn Morris @ 2009-08-26 16:59 ` Ushnish Basu 2009-08-27 22:32 ` Glenn Morris 0 siblings, 1 reply; 6+ messages in thread From: Ushnish Basu @ 2009-08-26 16:59 UTC (permalink / raw) To: Glenn Morris; +Cc: 4259 Glenn Morris wrote: > Please use M-x report-emacs-bug to report Emacs bugs, rather than > sending mail to addresses in the source files. > > My apologies - I thought of that after I sent off this email. I have now submitted a bug report directly, but I guess this bug was already filed as #4259, so the second bug would duplicate. > Ushnish Basu wrote (on Tue, 25 Aug 2009 at 12:09 -0700): > >> Currently I am using version 23.1.1, but I did not have this problem >> with 23.0.60 from CVS. [snip] > > Do you have a minimum example of a valid Fortran file that fails in > this way? > The bug shows for the following program: subroutine first do 10 i=1,10 10 continue end subroutine second do 20 i=1,100 20 continue end I sent the earlier invalid version just to highlight that it was the 'end' statement that seemed to be making the difference. I get the bug even in the current(?) CVS version 23.1.50.1 > The problem is another (see eg bug #2106) infinite loop in > end-of-defun, when called from the start of the "20" line. It's not > immediately obvious to me whether this is a problem in fortran-mode or > in end-of-defun. Thanks for your help. Best regards, Ushnish ^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#4259: Cannot indent fortran continue statement in emacs 23 2009-08-26 16:59 ` Ushnish Basu @ 2009-08-27 22:32 ` Glenn Morris 0 siblings, 0 replies; 6+ messages in thread From: Glenn Morris @ 2009-08-27 22:32 UTC (permalink / raw) To: Ushnish Basu; +Cc: 4259 Ushnish Basu wrote: > subroutine first > do 10 i=1,10 > 10 continue > end > subroutine second > do 20 i=1,100 > 20 continue > end Thanks, this looks like a (long-standing but previously hidden) fortran.el bug with motion commands. I will find a fix. ^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#4259: marked as done (Cannot indent fortran continue statement in emacs 23) 2009-08-25 19:09 ` bug#4259: Cannot indent fortran continue statement in emacs 23 Ushnish Basu 2009-08-26 1:56 ` Glenn Morris @ 2009-08-30 1:45 ` Emacs bug Tracking System [not found] ` <handler.4259.D4259.125159643616456.notifdone@emacsbugs.donarmstrong.com> 2 siblings, 0 replies; 6+ messages in thread From: Emacs bug Tracking System @ 2009-08-30 1:45 UTC (permalink / raw) To: Glenn Morris [-- Attachment #1: Type: text/plain, Size: 894 bytes --] Your message dated Sat, 29 Aug 2009 21:40:33 -0400 with message-id <ja8wh23wq6.fsf@fencepost.gnu.org> and subject line Re: Cannot indent fortran continue statement in emacs 23 has caused the Emacs bug report #4259, regarding Cannot indent fortran continue statement in emacs 23 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@emacsbugs.donarmstrong.com immediately.) -- 4259: http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=4259 Emacs Bug Tracking System Contact owner@emacsbugs.donarmstrong.com with problems [-- Attachment #2: Type: message/rfc822, Size: 3046 bytes --] From: Ushnish Basu <ubasu@cal.berkeley.edu> To: "Michael D. Prange" <prange@erl.mit.edu>, Glenn Morris <rgm@gnu.org> Subject: Cannot indent fortran continue statement in emacs 23 Date: Tue, 25 Aug 2009 12:09:30 -0700 Message-ID: <4A9436EA.3070303@cal.berkeley.edu> Hello, I believe I came across a bug in the latest version of the fortran mode in emacs 23. Currently I am using version 23.1.1, but I did not have this problem with 23.0.60 from CVS. Please see the following sample code - I have arranged it as such only to illustrate the problem: subroutine first do 10 i=1,10 10 continue end do 20 i=1,100 20 continue If I run fortran-indent-line on the first continue (label 10) it works fine. However, if I run it on the second one (label 20), I get the error: fortran-check-end-prog-re: Lisp nesting exceeds 'max-lisp-eval-depth' presumably because it is after the 'end' If I increase max-lisp-eval-depth (and max-specpdl-size) to 10000, then I get the error fortran-check-end-prog-re: Variable binding depth exceeds max-specpdl-size Is this something that has been fixed in CVS? I look forward to hearing back from you. Thanks, Ushnish [-- Attachment #3: Type: message/rfc822, Size: 2078 bytes --] From: Glenn Morris <rgm@gnu.org> To: 4259-done@emacsbugs.donarmstrong.com Subject: Re: Cannot indent fortran continue statement in emacs 23 Date: Sat, 29 Aug 2009 21:40:33 -0400 Message-ID: <ja8wh23wq6.fsf@fencepost.gnu.org> I believe this is fixed in the current CVS trunk. It would be great if you are able to test it out. 2009-08-30 Glenn Morris <rgm at gnu.org> * progmodes/fortran.el (fortran-start-prog-re): New constant, extracted from fortran-current-defun. (fortran-beginning-of-subprogram): Be more precise about finding the start, to avoid an infinite loop in end-of-defun. (Bug#4259) (fortran-end-of-subprogram): Simplify. (fortran-current-defun): Use fortran-start-prog-re. ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <handler.4259.D4259.125159643616456.notifdone@emacsbugs.donarmstrong.com>]
* bug#4259: closed by Glenn Morris <rgm@gnu.org> (Re: Cannot indent fortran continue statement in emacs 23) [not found] ` <handler.4259.D4259.125159643616456.notifdone@emacsbugs.donarmstrong.com> @ 2009-08-31 22:08 ` Ushnish Basu 0 siblings, 0 replies; 6+ messages in thread From: Ushnish Basu @ 2009-08-31 22:08 UTC (permalink / raw) To: 4259 Thanks, I tried it out and it works. Thanks for the quick bugfix. Ushnish Emacs bug Tracking System wrote: > This is an automatic notification regarding your bug report > which was filed against the emacs package: > > #4259: Cannot indent fortran continue statement in emacs 23 > > It has been closed by Glenn Morris <rgm@gnu.org>. > > Their explanation is attached below along with your original report. > If this explanation is unsatisfactory and you have not received a > better one in a separate message then please contact Glenn Morris <rgm@gnu.org> by > replying to this email. > > > > > ------------------------------------------------------------------------ > > Subject: > Re: Cannot indent fortran continue statement in emacs 23 > From: > Glenn Morris <rgm@gnu.org> > Date: > Sat, 29 Aug 2009 21:40:33 -0400 > To: > 4259-done@emacsbugs.donarmstrong.com > > To: > 4259-done@emacsbugs.donarmstrong.com > > > I believe this is fixed in the current CVS trunk. It would be great if > you are able to test it out. > > 2009-08-30 Glenn Morris <rgm at gnu.org> > > * progmodes/fortran.el (fortran-start-prog-re): New constant, extracted > from fortran-current-defun. > (fortran-beginning-of-subprogram): Be more precise about finding the > start, to avoid an infinite loop in end-of-defun. (Bug#4259) > (fortran-end-of-subprogram): Simplify. > (fortran-current-defun): Use fortran-start-prog-re. > > > ------------------------------------------------------------------------ > > Subject: > Cannot indent fortran continue statement in emacs 23 > From: > Ushnish Basu <ubasu@cal.berkeley.edu> > Date: > Tue, 25 Aug 2009 12:09:30 -0700 > To: > "Michael D. Prange" <prange@erl.mit.edu>, Glenn Morris <rgm@gnu.org> > > To: > "Michael D. Prange" <prange@erl.mit.edu>, Glenn Morris <rgm@gnu.org> > > > Hello, > > I believe I came across a bug in the latest version of the fortran mode > in emacs 23. Currently I am using version 23.1.1, but I did not have > this problem with 23.0.60 from CVS. > > Please see the following sample code - I have arranged it as such only > to illustrate the problem: > > subroutine first > do 10 i=1,10 > 10 continue > end > do 20 i=1,100 > 20 continue > > > If I run fortran-indent-line on the first continue (label 10) it works > fine. However, if I run it on the second one (label 20), I get the error: > > fortran-check-end-prog-re: Lisp nesting exceeds 'max-lisp-eval-depth' > > presumably because it is after the 'end' > > If I increase max-lisp-eval-depth (and max-specpdl-size) to 10000, then > I get the error > > fortran-check-end-prog-re: Variable binding depth exceeds max-specpdl-size > > Is this something that has been fixed in CVS? > > I look forward to hearing back from you. > > Thanks, > > Ushnish > ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-08-31 22:08 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- [not found] <ja8wh23wq6.fsf@fencepost.gnu.org> 2009-08-25 19:09 ` bug#4259: Cannot indent fortran continue statement in emacs 23 Ushnish Basu 2009-08-26 1:56 ` Glenn Morris 2009-08-26 16:59 ` Ushnish Basu 2009-08-27 22:32 ` Glenn Morris 2009-08-30 1:45 ` bug#4259: marked as done (Cannot indent fortran continue statement in emacs 23) Emacs bug Tracking System [not found] ` <handler.4259.D4259.125159643616456.notifdone@emacsbugs.donarmstrong.com> 2009-08-31 22:08 ` bug#4259: closed by Glenn Morris <rgm@gnu.org> (Re: Cannot " Ushnish Basu
Code repositories for project(s) associated with this external index https://git.savannah.gnu.org/cgit/emacs.git https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.