all messages for Emacs-related lists mirrored at yhetil.org
 help / color / mirror / code / Atom feed
* bug#43227: EWW ignores 'multiple' attribute of 'select'
@ 2020-09-05 17:23 Nicolas Graner
  2020-09-06 23:05 ` Lars Ingebrigtsen
  0 siblings, 1 reply; 5+ messages in thread
From: Nicolas Graner @ 2020-09-05 17:23 UTC (permalink / raw)
  To: 43227

EWW renders <select multiple> elements like <select>, not allowing
multiple selections.

A multiple select should probably be rendered similar to a set of
checkboxes.

Nicolas





^ permalink raw reply	[flat|nested] 5+ messages in thread

* bug#43227: EWW ignores 'multiple' attribute of 'select'
  2020-09-05 17:23 bug#43227: EWW ignores 'multiple' attribute of 'select' Nicolas Graner
@ 2020-09-06 23:05 ` Lars Ingebrigtsen
  2020-09-07  8:51   ` Nicolas Graner
  0 siblings, 1 reply; 5+ messages in thread
From: Lars Ingebrigtsen @ 2020-09-06 23:05 UTC (permalink / raw)
  To: Nicolas Graner; +Cc: 43227

Nicolas Graner <nicolas.graner@universite-paris-saclay.fr> writes:

> EWW renders <select multiple> elements like <select>, not allowing
> multiple selections.
>
> A multiple select should probably be rendered similar to a set of
> checkboxes.

In the context of the new drop-down menu...

Perhaps they could just be rendered as

[ ] Val1
[ ] Val2

and if you choose one of them, then we go to 

[x] Val1
[ ] Val2

(and close the menu), and then you have to open it again to click on:

[x] Val1
[x] Val2

Because I don't know a way to make the menu stay up after clicking on
it.

-- 
(domestic pets only, the antidote for overdose, milk.)
   bloggy blog: http://lars.ingebrigtsen.no





^ permalink raw reply	[flat|nested] 5+ messages in thread

* bug#43227: EWW ignores 'multiple' attribute of 'select'
  2020-09-06 23:05 ` Lars Ingebrigtsen
@ 2020-09-07  8:51   ` Nicolas Graner
  2020-09-07 10:17     ` Lars Ingebrigtsen
  0 siblings, 1 reply; 5+ messages in thread
From: Nicolas Graner @ 2020-09-07  8:51 UTC (permalink / raw)
  To: Lars Ingebrigtsen; +Cc: 43227

Lars Ingebrigtsen <larsi@gnus.org> wrote on 2020-09-07 01:05:
> In the context of the new drop-down menu...
>
> Perhaps they could just be rendered as
>
> [ ] Val1
> [ ] Val2
>
> and if you choose one of them, then we go to 
>
> [x] Val1
> [ ] Val2
>
> (and close the menu), and then you have to open it again to click on:
>
> [x] Val1
> [x] Val2

This looks really awkward. Reopening the menu for each item you want to
select or deselect is inefficient and counter-intuitive. Besides, it
leaves open the question of how to render a multiple select in the eww
buffer, showing which options are selected.

> Because I don't know a way to make the menu stay up after clicking on it.

Pop-up menus are probably not the right tool to implement multiple
selects. There is a reason why graphical browsers offer quite different
interfaces to single and multiple selects.

I stand by my suggestion that a multiple select should look similar to a
list of checkboxes. Maybe it could actually be converted to checkboxes
at the DOM level, before rendering, and then let the normal checkbox
code do the job?

Nicolas





^ permalink raw reply	[flat|nested] 5+ messages in thread

* bug#43227: EWW ignores 'multiple' attribute of 'select'
  2020-09-07  8:51   ` Nicolas Graner
@ 2020-09-07 10:17     ` Lars Ingebrigtsen
  2020-09-07 16:05       ` Drew Adams
  0 siblings, 1 reply; 5+ messages in thread
From: Lars Ingebrigtsen @ 2020-09-07 10:17 UTC (permalink / raw)
  To: Nicolas Graner; +Cc: 43227

[-- Attachment #1: Type: text/plain, Size: 542 bytes --]

Nicolas Graner <nicolas.graner@universite-paris-saclay.fr> writes:

> I stand by my suggestion that a multiple select should look similar to a
> list of checkboxes. Maybe it could actually be converted to checkboxes
> at the DOM level, before rendering, and then let the normal checkbox
> code do the job?

I think it would be kinda surprising to render a <select multiple> as a
series of checkboxes: You expect a <select> to be kinda small even if
the number of possible choices is large.

I wondered how Chromium rendered those, and it's:


[-- Attachment #2: Type: image/png, Size: 6323 bytes --]

[-- Attachment #3: Type: text/plain, Size: 346 bytes --]


(Multiple to the left and singular to the right.)

So it's a widget that's about four lines high and with a scroll bar for
further entries...

Well, I didn't know about popup-menu -- does Emacs have support for this
kind of thing, too?  :-)

-- 
(domestic pets only, the antidote for overdose, milk.)
   bloggy blog: http://lars.ingebrigtsen.no

^ permalink raw reply	[flat|nested] 5+ messages in thread

* bug#43227: EWW ignores 'multiple' attribute of 'select'
  2020-09-07 10:17     ` Lars Ingebrigtsen
@ 2020-09-07 16:05       ` Drew Adams
  0 siblings, 0 replies; 5+ messages in thread
From: Drew Adams @ 2020-09-07 16:05 UTC (permalink / raw)
  To: Lars Ingebrigtsen, Nicolas Graner; +Cc: 43227

> > I stand by my suggestion that a multiple select should look similar to a
> > list of checkboxes. Maybe it could actually be converted to checkboxes
> > at the DOM level, before rendering, and then let the normal checkbox
> > code do the job?
> 
> I think it would be kinda surprising to render a <select multiple> as a
> series of checkboxes: You expect a <select> to be kinda small even if
> the number of possible choices is large.

This is from the Icicles doc, but it's about vanilla Emacs:

 Any Emacs command could be defined to use an input loop,
 asking for file names until you do something to signal
 that you're done inputting. It could provide for file-name
 completion by calling 'read-file-name' to read your input.

(The same applies to any completion, of course, not just
file names.)

As food for thought about selecting multiple choices, here
are two Icicles features.  The second probably corresponds
more directly with what you're talking about.

1. Choose multiple completion candidates from the minibuffer.

https://www.emacswiki.org/emacs/Icicles_-_Multi-Commands

Continuation of the text quoted above, about an input loop:

 * But what if you could also filter the domain of discourse
   on the fly, so that the candidate files were only those
   matching a regular expression (regexp) that you typed?
   Then, the command definition would need to provide for
   that behavior too.

 * And what if you could then take the complement of that
   set of candidate file names, with respect to the complete
   set of files in the directory? Or subtract (exclude) some
   set of file names from the set of matching names, to get
   the set of possible choices?

 * And what if the set of potential candidates at each step
   (regexp match, complement, set difference) could also be
   displayed in a multiple-choice menu?

IOW, integrate multiple selection during completion with
other completion enhancements.  Let a function such as
`completing-read' let you choose multiple candidates, and
change the set of completion matches on the fly, so that
your multiple choices can correspond to different kinds
of matches.


2. Mark multiple completion candidates in *Completions*,
to select them for subsequent actions.

The difference here is that the selected candidates are
distinguished in *Completions*.  And they can be reused
in subsequent commands.  They can even be persisted and
reused in a later Emacs session.

Because they are both distinguished visually ("marked")
and reusable later, Icicles calls this "saving" instead
of "marking".

The marking is shown in *Completions*, but you can do it
without switching to that window.

https://www.emacswiki.org/emacs/Icicles_-_Nutshell_View#ChooseBeforeYouAct

https://www.emacswiki.org/emacs/Icicles_-_Candidate_Sets

From that page (about marking "saving" a set of candidates:

 Matching, saving, and retrieving candidates is a powerful
 way to interact with completion.  One important use is to
 prepare a list of candidates on which to act, and then
 act on them all at once using `C-!'.  This is a good way
 to proceed when you want to double-check what to act on,
 before you actually act.  This is the same idea behind
 marking files in Dired and then operating on the marked
 files, using 'x'.  It corresponds to what is represented
 in some user interfaces by filling out a checklist
 followed by clicking 'OK'.





^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2020-09-07 16:05 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-09-05 17:23 bug#43227: EWW ignores 'multiple' attribute of 'select' Nicolas Graner
2020-09-06 23:05 ` Lars Ingebrigtsen
2020-09-07  8:51   ` Nicolas Graner
2020-09-07 10:17     ` Lars Ingebrigtsen
2020-09-07 16:05       ` Drew Adams

Code repositories for project(s) associated with this external index

	https://git.savannah.gnu.org/cgit/emacs.git
	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.