* LaTeX export. Substitute some headlines with arbitrary command
@ 2013-03-13 20:50 Andrey Yankin
2013-03-13 22:49 ` Charles Berry
2013-03-14 0:14 ` Nick Dokos
0 siblings, 2 replies; 6+ messages in thread
From: Andrey Yankin @ 2013-03-13 20:50 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 483 bytes --]
Hi!
I want arbitrary top level headline to be exported not as \section (or
whatever it is) but with some other arbitrary latex command.
I even do not want to use headline text. Just write \intro instead of
\section{...} in tex file.
I've tried some fiddling with :noexport: and :export: tags to hide output
for selected headlines. It didn't work.
Currently I'm heading to this metod: http://stackoverflow.com/a/9679105 of
creating my own parser.
Are there any easier solutions?
[-- Attachment #2: Type: text/html, Size: 625 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: LaTeX export. Substitute some headlines with arbitrary command
2013-03-13 20:50 LaTeX export. Substitute some headlines with arbitrary command Andrey Yankin
@ 2013-03-13 22:49 ` Charles Berry
2013-03-14 0:14 ` Nick Dokos
1 sibling, 0 replies; 6+ messages in thread
From: Charles Berry @ 2013-03-13 22:49 UTC (permalink / raw)
To: emacs-orgmode
Andrey Yankin <yankin013 <at> gmail.com> writes:
>
> Hi!I want arbitrary top level headline to be exported not as \section
> (or whatever it is) but with some other arbitrary latex command.
[snip]
The filter mechanism might be a good choice.
Here is an example of modifying a headline:
http://thread.gmane.org/gmane.emacs.orgmode/67667/focus=67706
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: LaTeX export. Substitute some headlines with arbitrary command
2013-03-13 20:50 LaTeX export. Substitute some headlines with arbitrary command Andrey Yankin
2013-03-13 22:49 ` Charles Berry
@ 2013-03-14 0:14 ` Nick Dokos
2013-03-14 5:14 ` Andrey Yankin
1 sibling, 1 reply; 6+ messages in thread
From: Nick Dokos @ 2013-03-14 0:14 UTC (permalink / raw)
To: Andrey Yankin; +Cc: emacs-orgmode
Andrey Yankin <yankin013@gmail.com> wrote:
> Hi!
>
> I want arbitrary top level headline to be exported not as \section (or whatever it is) but with some
> other arbitrary latex command.
>
> I even do not want to use headline text. Just write \intro instead of \section{...} in tex file.
>
> I've tried some fiddling with :noexport: and :export: tags to hide output for selected headlines. It
> didn't work.
>
> Currently I'm heading to this metod: http://stackoverflow.com/a/9679105 of creating my own parser.
>
> Are there any easier solutions?
>
Have you tried customizing the org-latex-classes variable? I'm not quite
sure what you are trying to do (an example would help), but I don't see
any obstacles.
Nick
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: LaTeX export. Substitute some headlines with arbitrary command
2013-03-14 0:14 ` Nick Dokos
@ 2013-03-14 5:14 ` Andrey Yankin
2013-03-14 6:17 ` Nick Dokos
0 siblings, 1 reply; 6+ messages in thread
From: Andrey Yankin @ 2013-03-14 5:14 UTC (permalink / raw)
To: nicholas.dokos; +Cc: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 1303 bytes --]
Sorry if it wasn't clear.
I should have illustrate this.
Input:
* Headline 1
** Node 1.1
Content 1
* Headline 2
Content 2
* Headline 3
Content 3
* Headline 4
Content 4
* Headline 5
Content 5
Desired output:
\intro
\subsection{Node 1.1}
Content 1
\section{Headline 2}
Content 2
\section{Headline 3}
Content 3
\section{Headline 4}
Content 4
\conclusion
Content 5
First and fifth top headlines output is replaced. And others are defaults.
All children keep the same.
2013/3/14 Nick Dokos <nicholas.dokos@hp.com>
> Andrey Yankin <yankin013@gmail.com> wrote:
>
> > Hi!
> >
> > I want arbitrary top level headline to be exported not as \section (or
> whatever it is) but with some
> > other arbitrary latex command.
> >
> > I even do not want to use headline text. Just write \intro instead of
> \section{...} in tex file.
> >
> > I've tried some fiddling with :noexport: and :export: tags to hide
> output for selected headlines. It
> > didn't work.
> >
> > Currently I'm heading to this metod: http://stackoverflow.com/a/9679105of creating my own parser.
> >
> > Are there any easier solutions?
> >
>
> Have you tried customizing the org-latex-classes variable? I'm not quite
> sure what you are trying to do (an example would help), but I don't see
> any obstacles.
>
> Nick
>
[-- Attachment #2: Type: text/html, Size: 2058 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: LaTeX export. Substitute some headlines with arbitrary command
2013-03-14 5:14 ` Andrey Yankin
@ 2013-03-14 6:17 ` Nick Dokos
2013-03-14 8:07 ` Andrey Yankin
0 siblings, 1 reply; 6+ messages in thread
From: Nick Dokos @ 2013-03-14 6:17 UTC (permalink / raw)
To: Andrey Yankin; +Cc: emacs-orgmode
Andrey Yankin <yankin013@gmail.com> wrote:
> Sorry if it wasn't clear.
> I should have illustrate this.
>
> Input:
>
> * Headline 1
> ** Node 1.1
> Content 1
> * Headline 2
> Content 2
> * Headline 3
> Content 3
> * Headline 4
> Content 4
> * Headline 5
> Content 5
>
> Desired output:
>
> \intro
> \subsection{Node 1.1}
> Content 1
> \section{Headline 2}
> Content 2
> \section{Headline 3}
> Content 3
> \section{Headline 4}
> Content 4
> \conclusion
> Content 5
>
> First and fifth top headlines output is replaced. And others are defaults.
> All children keep the same.
>
OK - I don't think you can do this with org-latex-classes: there is no
provision for exceptional cases there. Charles Berry suggested filters:
maybe something can be done with that.
FWIW, I would just wait until the last minute and then when it's time to
produce the final pdf, I'd replace the two headlines by hand - but that
assumes that the document is a one-off, do-it-once-and-never-again kind
of thing.
Nick
> 2013/3/14 Nick Dokos <nicholas.dokos@hp.com>
>
> Andrey Yankin <yankin013@gmail.com> wrote:
>
> > Hi!
> >
> > I want arbitrary top level headline to be exported not as \section (or whatever it is) but
> with some
> > other arbitrary latex command.
> >
> > I even do not want to use headline text. Just write \intro instead of \section{...} in tex
> file.
> >
> > I've tried some fiddling with :noexport: and :export: tags to hide output for selected
> headlines. It
> > didn't work.
> >
> > Currently I'm heading to this metod: http://stackoverflow.com/a/9679105 of creating my own
> parser.
> >
> > Are there any easier solutions?
> >
>
> Have you tried customizing the org-latex-classes variable? I'm not quite
> sure what you are trying to do (an example would help), but I don't see
> any obstacles.
>
> Nick
>
>
> ----------------------------------------------------
> Alternatives:
>
> ----------------------------------------------------
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: LaTeX export. Substitute some headlines with arbitrary command
2013-03-14 6:17 ` Nick Dokos
@ 2013-03-14 8:07 ` Andrey Yankin
0 siblings, 0 replies; 6+ messages in thread
From: Andrey Yankin @ 2013-03-14 8:07 UTC (permalink / raw)
To: nicholas.dokos, ccberry; +Cc: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 2496 bytes --]
Charles, Nick, thanks for the tip of using filters.
As far as I can see it requires version 8 of org-mode to be installed. Am I
right?
I am using now 7.8.11.
I'll try to install a new version and check out filters.
2013/3/14 Nick Dokos <nicholas.dokos@hp.com>
> Andrey Yankin <yankin013@gmail.com> wrote:
>
> > Sorry if it wasn't clear.
> > I should have illustrate this.
> >
> > Input:
> >
> > * Headline 1
> > ** Node 1.1
> > Content 1
> > * Headline 2
> > Content 2
> > * Headline 3
> > Content 3
> > * Headline 4
> > Content 4
> > * Headline 5
> > Content 5
> >
> > Desired output:
> >
> > \intro
> > \subsection{Node 1.1}
> > Content 1
> > \section{Headline 2}
> > Content 2
> > \section{Headline 3}
> > Content 3
> > \section{Headline 4}
> > Content 4
> > \conclusion
> > Content 5
> >
> > First and fifth top headlines output is replaced. And others are
> defaults.
> > All children keep the same.
> >
>
> OK - I don't think you can do this with org-latex-classes: there is no
> provision for exceptional cases there. Charles Berry suggested filters:
> maybe something can be done with that.
>
> FWIW, I would just wait until the last minute and then when it's time to
> produce the final pdf, I'd replace the two headlines by hand - but that
> assumes that the document is a one-off, do-it-once-and-never-again kind
> of thing.
>
> Nick
>
> > 2013/3/14 Nick Dokos <nicholas.dokos@hp.com>
> >
> > Andrey Yankin <yankin013@gmail.com> wrote:
> >
> > > Hi!
> > >
> > > I want arbitrary top level headline to be exported not as \section
> (or whatever it is) but
> > with some
> > > other arbitrary latex command.
> > >
> > > I even do not want to use headline text. Just write \intro instead
> of \section{...} in tex
> > file.
> > >
> > > I've tried some fiddling with :noexport: and :export: tags to hide
> output for selected
> > headlines. It
> > > didn't work.
> > >
> > > Currently I'm heading to this metod:
> http://stackoverflow.com/a/9679105 of creating my own
> > parser.
> > >
> > > Are there any easier solutions?
> > >
> >
> > Have you tried customizing the org-latex-classes variable? I'm not
> quite
> > sure what you are trying to do (an example would help), but I don't
> see
> > any obstacles.
> >
> > Nick
> >
> >
> > ----------------------------------------------------
> > Alternatives:
> >
> > ----------------------------------------------------
>
[-- Attachment #2: Type: text/html, Size: 3626 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-03-14 8:07 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-03-13 20:50 LaTeX export. Substitute some headlines with arbitrary command Andrey Yankin
2013-03-13 22:49 ` Charles Berry
2013-03-14 0:14 ` Nick Dokos
2013-03-14 5:14 ` Andrey Yankin
2013-03-14 6:17 ` Nick Dokos
2013-03-14 8:07 ` Andrey Yankin
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.