* ideas for org-refile
@ 2008-10-10 19:07 Samuel Wales
2008-10-12 12:08 ` Carsten Dominik
0 siblings, 1 reply; 6+ messages in thread
From: Samuel Wales @ 2008-10-10 19:07 UTC (permalink / raw)
To: emacs-orgmode
I am just starting to use org-refile. I read the manual but these
didn't seem to be there. (It's possible that I missed one or two.)
Maybe they would be of interest?
*** org-refile
***** org-refile: new command to save to the last place saved
thus, you don't need to enter any target.
***** org-refile: accept a region if transient-mark-mode
***** org-refile: allow you to enter a new item
it will create that and refile under it. might need to experiment
with different interfaces.
***** org-refile: use ido.el or similar when using path method
or iswitchb or anything.el. obviously you would not want it
to require such packages, but for those who have them.
Thanks.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ideas for org-refile
2008-10-10 19:07 ideas for org-refile Samuel Wales
@ 2008-10-12 12:08 ` Carsten Dominik
2008-10-12 17:49 ` Eric Schulte
2008-10-12 19:18 ` Samuel Wales
0 siblings, 2 replies; 6+ messages in thread
From: Carsten Dominik @ 2008-10-12 12:08 UTC (permalink / raw)
To: Samuel Wales; +Cc: emacs-orgmode
Hi Samuel,
On Oct 10, 2008, at 9:07 PM, Samuel Wales wrote:
> I am just starting to use org-refile. I read the manual but these
> didn't seem to be there. (It's possible that I missed one or two.)
>
> Maybe they would be of interest?
>
> *** org-refile
> ***** org-refile: new command to save to the last place saved
> thus, you don't need to enter any target.
You will get back to the previous target simply by pressing <up> at
the prompt, as the previous target is in the history. I'd say this
is good enough.
>
> ***** org-refile: accept a region if transient-mark-mode
What do you mean by this? A region with several headlines, to
move them all?
>
> ***** org-refile: allow you to enter a new item
> it will create that and refile under it. might need to experiment
> with different interfaces.
I think this is what remember is for. If you exit a remember buffer
with `C-1 C-c C-c', the refile interface will be used to file the entry.
> ***** org-refile: use ido.el or similar when using path method
> or iswitchb or anything.el. obviously you would not want it
> to require such packages, but for those who have them.
I don't know ido.el, what advantages would it give?
- Carsten
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ideas for org-refile
2008-10-12 12:08 ` Carsten Dominik
@ 2008-10-12 17:49 ` Eric Schulte
2008-10-12 19:18 ` Samuel Wales
1 sibling, 0 replies; 6+ messages in thread
From: Eric Schulte @ 2008-10-12 17:49 UTC (permalink / raw)
To: Carsten Dominik; +Cc: emacs-orgmode
Carsten Dominik <dominik@science.uva.nl> writes:
>> ***** org-refile: use ido.el or similar when using path method
>> or iswitchb or anything.el. obviously you would not want it
>> to require such packages, but for those who have them.
>
> I don't know ido.el, what advantages would it give?
>
ido (Interactive Do) provides enhanced mini-buffer completion, try
evaluating the following
(require 'ido)
(ido-mode t)
then executing some simple commands which include mini-buffer completion
(find-file, describe-function, etc...). I find it very useful.
-- Eric
From the Comments at the top of ido.el
,----
| ;;; Commentary:
|
| ;; Ido - interactive do - switches between buffers and opens files and
| ;; directories with a minimum of keystrokes. It is a superset of
| ;; iswitchb, the interactive buffer switching package by Stephen Eglen.
|
| ;; Interactive substring matching
| ;; ------------------------------
| ;;
| ;; As you type in a substring, the list of buffers or files currently
| ;; matching the substring are displayed as you type. The list is
| ;; ordered so that the most recent buffers or files visited come at
| ;; the start of the list.
| ;;
| ;; The buffer or file at the start of the list will be the one visited
| ;; when you press RETURN. By typing more of the substring, the list is
| ;; narrowed down so that gradually the buffer or file you want will be
| ;; at the top of the list. Alternatively, you can use C-s and C-r (or
| ;; the right and left arrow keys) to rotate buffer or file names in the
| ;; list until the one you want is at the top of the list.
| ;;
| ;; Completion is also available so that you can see what is common to
| ;; all of the matching buffers or files as you type.
| ;;
`----
>
> - Carsten
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ideas for org-refile
2008-10-12 12:08 ` Carsten Dominik
2008-10-12 17:49 ` Eric Schulte
@ 2008-10-12 19:18 ` Samuel Wales
2008-11-11 5:59 ` Carsten Dominik
1 sibling, 1 reply; 6+ messages in thread
From: Samuel Wales @ 2008-10-12 19:18 UTC (permalink / raw)
To: Carsten Dominik; +Cc: emacs-orgmode
Hi Carsten,
On Sun, Oct 12, 2008 at 05:08, Carsten Dominik <dominik@science.uva.nl> wrote:
> You will get back to the previous target simply by pressing <up> at
> the prompt, as the previous target is in the history. I'd say this
> is good enough.
I was thinking that a separate command would allow binding to a single
key, but history should help a lot. Don't know why I didn't try it.
Thanks.
>> ***** org-refile: accept a region if transient-mark-mode
>
> What do you mean by this? A region with several headlines, to
> move them all?
Yes.
(More generally it might be possible in principle to mark specific
entries and then move the marked entries, like marking files in dired,
but that would be kind of complicated in org.)
>> ***** org-refile: allow you to enter a new item
>> it will create that and refile under it. might need to experiment
>> with different interfaces.
>
> I think this is what remember is for. If you exit a remember buffer
> with `C-1 C-c C-c', the refile interface will be used to file the entry.
Different.
If you are on a previously remembered entry called "granny smith", and
you want to file under /food/fruit/apple, but apple does not exist
(/food/fruit is all that exists), then you could type
/food/fruit/apple and org-refile would 1. create apple and 2. put
the entry under point underneath apple.
At present, org-refile will not let you enter the apple part. Perhaps
I am missing something here.
> I don't know ido.el, what advantages would it give?
You could, for example, type a sequence of letters that appear in that
order anywhere in the target, case insensitively, to select an entry.
It is thrillingly efficient.
Maybe anything.el has a similar mechanism.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ideas for org-refile
2008-10-12 19:18 ` Samuel Wales
@ 2008-11-11 5:59 ` Carsten Dominik
2008-11-11 6:04 ` Samuel Wales
0 siblings, 1 reply; 6+ messages in thread
From: Carsten Dominik @ 2008-11-11 5:59 UTC (permalink / raw)
To: Samuel Wales; +Cc: emacs-orgmode
Hi Samuel,
On Oct 12, 2008, at 9:18 PM, Samuel Wales wrote:
> Hi Carsten,
>
> On Sun, Oct 12, 2008 at 05:08, Carsten Dominik
> <dominik@science.uva.nl> wrote:
>> You will get back to the previous target simply by pressing <up> at
>> the prompt, as the previous target is in the history. I'd say this
>> is good enough.
>
> I was thinking that a separate command would allow binding to a single
> key, but history should help a lot. Don't know why I didn't try it.
> Thanks.
>
>>> ***** org-refile: accept a region if transient-mark-mode
>>
>> What do you mean by this? A region with several headlines, to
>> move them all?
>
> Yes.
This part I have now implement. You can select a region of siblings,
and they will all be refiled to the same location.
- Carsten
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ideas for org-refile
2008-11-11 5:59 ` Carsten Dominik
@ 2008-11-11 6:04 ` Samuel Wales
0 siblings, 0 replies; 6+ messages in thread
From: Samuel Wales @ 2008-11-11 6:04 UTC (permalink / raw)
To: Carsten Dominik; +Cc: emacs-orgmode
On Mon, Nov 10, 2008 at 22:59, Carsten Dominik <dominik@science.uva.nl> wrote:
> This part I have now implement. You can select a region of siblings,
> and they will all be refiled to the same location.
Thanks, that is excellent. I like it when commands work on regions also.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2008-11-11 6:04 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-10-10 19:07 ideas for org-refile Samuel Wales
2008-10-12 12:08 ` Carsten Dominik
2008-10-12 17:49 ` Eric Schulte
2008-10-12 19:18 ` Samuel Wales
2008-11-11 5:59 ` Carsten Dominik
2008-11-11 6:04 ` Samuel Wales
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.